Remove the now unused gtktest configure flag and add one for the emacs option
so we're deterministic. Resolves the warning:
WARNING: QA Issue: leafpad: configure was passed unrecognised options: --disable-gtktest
(From OE-Core rev: 522a8e8d332c162a923e8b880b36fc4b12320c87)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Resolves the QA error:
WARNING: QA Issue: libxkbfile: configure was passed unrecognised options: --without-xcb
(there is no such configure option any more)
(From OE-Core rev: ef0b66f4a8522445ef8b6468660bf030849bab13)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If warnings come from recipes parsing
and not from package build, 'parent' object
will be None; so don't update the color for it.
[YOCTO #5621]
(Bitbake rev: f9d24f55a5ffa9257e7ba3257be1210687513733)
Signed-off-by: Valentin Popa <valentin.popa@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The FILES_INFO structure is now much simpler, so remove all of the
horrible mangling we had to do here in order to read it.
(Bitbake rev: 11a664292064dbf76850bf21ba386f78a43a56b6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This treeview code was obviously copy-pasted from one of the config
dialogs and the variables were never renamed. Rename them now to improve
readability.
(Bitbake rev: 93b3ddad4396d757d1d0c199ac168f8b1a205fe3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PKGSIZE is now in bytes in pkgdata, so we need to treat it as such in
the UI code for Hob / Toaster.
(Bitbake rev: 3b5ff814cd4a3efa4b17c6b343ec39c9acca5c9e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
initConfigurationData and loadConfigurationData are similar functions, the only
reason for them appears to be to be able to reset the pre/post configuration
files. The current code is confusing and unmaintainable.
Instead this patch creates a new Sync command which allows these to be explicitly
set. The init and load functions can then be merged into one. There is then no
need for a parseConfiguration command, we can simply reset the server to have the
settings take effect.
The reset fuction is not an instant value return and triggers an event so it should
be an Async command, not a sync one.
The number of calls for the set pre/post command is probably higher than it
need be but someone with more familiarity with the hob code base can probably
figure out the right places its needed (maybe just init_cooker?).
(Bitbake rev: bae5210d7e048022f083361964ebec7daf1608f7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Might as well use this functionality now we have it available.
(Bitbake rev: cd7f4d85e3f187140d1bb0aecf82f657a8f8701a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous "contains" changes caused a ~3% parsing speed impact.
Looking at the cause of those changes was interesting:
* Use of defaultdict was slower than just checking for missing entries
and setting them when needed.
* Even the "import collections" adversely affects parsing speed
* There was a missing intern function for the contains cache data
* Setting up a log object for each variable has noticeable overhead
due to the changes in the code paths uses, we can avoid this.
* We can call getVarFlag on "_content" directly within VariableParse
for a noticeable speed gain since its a seriously hot code path.
This patch therefore tweaks the code based on the above observations to
get some of the speed back.
(Bitbake rev: fca802187a2a30686a8a07d2b6b16a3e5716e293)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As this task is installing files into $D it needs to run inside pseudo so that
special permissions and owners are preserved.
(From OE-Core rev: 64f0a0bc408d8e32d5e795aeb9fffee0539f5e22)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When toolchain directory is changed to execute mode, some non-executable
files or empty files are sorted. This will result in some errors. Thus when
sorting executable files or dynamically linked library, additional conditions
are to exclude non-executable files or empty files.
(From OE-Core rev: c9d56308bfa9ee7f4a9b22eae86390626ddc1c35)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was currently autodetecting.
(From OE-Core rev: 68fc138d172d491e16d5e6f2fc21fc779c04b92f)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using make -j with the 'install' target, it's possible for altbininstall
(which normally creates BINDIR) and libainstall (which doesn't, though it
installs python-config there) to race, resulting in a failure due to
attempting to install python-config into a nonexistent BINDIR. Ensure it also
exists in the libainstall target.
(From OE-Core rev: 54da47f3ddc1c009594744793060ffd09db3ad11)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, the tcpwrappers argument wasn't obeyed, and as such the build
wasn't as deterministic as we'd prefer.
(From OE-Core rev: 16bbdef239942276a1740a3b9dfe4e8c34a16b29)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If sysroot contains '-D' or '-I' characters, the SVN_NEON_INCLUDES and
the corresponding CFLAGS will not get the correct value.
This will cause build failures.
This patch fixes the above problem.
[YOCTO #5458]
(From OE-Core rev: 7078397ef39de43244fca7e24683b2a83913cbbf)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #2519]
When getting gcc from sstate, it is possible to get a gcc with a bogus
sysroot configuration, as discussed in [1] or in [YOCTO #2519].
mklibs script will eventually call gcc, so we need to make sure that it
provides gcc with the right sysroot location.
[1] http://lists.openembedded.org/pipermail/openembedded-core/2013-September/084159.html
(From OE-Core rev: 3a66dd762e493ad2cda57110be67c3b06628050a)
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Setting DESCRIPTION to the same value as SUMMARY doesn't do anything,
since the value of DESCRIPTION will be derived from SUMMARY if not
specified.
(From OE-Core rev: e1e888585c84175580ad822d4a6c93f62e5ce16c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Set SUMMARY instead of DESCRIPTION
* Move packaging variables to the end
* Fix spacing in LICENSE assignment
* Fix indenting
(From OE-Core rev: 92f10f733a93f1772636603c0e910daf3eb9ff42)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Set FILESEXTRAPATHS instead of FILESPATH
* Don't set THISDIR, it's already set by base.bbclass
(From OE-Core rev: e2bcf2c435cea196f1e9314ae6837aa4ab6b51ae)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also tidy up value a little bit.
(From OE-Core rev: a8e7efe23a5962610fb5818a9a802e737fca918f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop FILESPATHPKG setting since it seems to be superfluous.
(From OE-Core rev: 694d95c94d03fb1e63d6c52840a5149c3b166c2a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new module which abstracts the target object used by testimage.bbclass
The purpose of this module is to move the deployment of a target from testimage.bbclass,
basically abstracting different implementations of how we setup a target and how it runs commands.
It allows to select one implementation or another by setting TEST_TARGET (currently to: "qemu" and "simpleremote").
QemuTarget is used to start a qemu instance (as it's currently done in testimage.bbclass)
SimpleRemoteTarget is meant for a remote machine (by setting TEST_TARGET_IP) that's already up and running
with network and ssh.
Simply put, it opens the door for running the tests on different types of targets by adding new classes
(maybe qemu-nfsroot or remote-special etc.). One could also override BaseTarget which currently uses
the existing SSHControl module and add a serial implementation.
[ YOCTO #5554 ]
(From OE-Core rev: c1bfd4017f6f6502a68ceb3edf7d2027d02a309d)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch makes the necessary changes for using the targetcontrol.py module
so that one can run the same tests on a qemu instance or a remote machine
based on the value of TEST_TARGET variable: "qemu" or "simpleremote".
The default value is "qemu" which starts a qemu instance and it's the
with what we currently have.
With "simpleremote", the remote machine must be up with network and ssh
and you need to set TEST_TARGET_IP with the IP address of the remote machine
(it can still be a qemu instance that was manually started).
Basically testimage.bbclass now does something along the lines of:
- load tests -> deploy (prepare) / start target -> run tests.
There were a couple of changes necessary for tests and
also some cleanups/renames that were needed to adjust this change. (use
ip everywhere when refering to target and server_ip when refering to host/build machine)
Also two unnecessary and unsed methods were dropped from sshcontrol.
[ YOCTO #5554 ]
(From OE-Core rev: a7820350fa3271d78ed7476e02f4aef593be1125)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
buildtest-TESTS and runtest-TESTS targets are required by ptest.
In order to have those targets in automake 1.13.4, serial-tests
should be specified since parallel test is assumed by default
and serial-tests is optional.
(From OE-Core rev: b7a0e1c351e396af6470e59c428128789295bd96)
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Python recipe did a sed s/ccache/$(CCACHE) on the Makefile, which
replaces all "ccache" including ones that consist of a full path.
This leads to build error when building in a project path with
"ccache" in its name. Fix it by only replacing "ccache " with
"$(CCACHE) ".
(From OE-Core rev: 1181112cf65bc0186807fc59399c5dddcb9f9449)
Signed-off-by: Lei Liu <lei.liu2@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the new manifest file instead of ${WORKDIR}/installed_pkgs.txt for determining
if an image has a certain package, because installed_pkgs.txt goes away with rm_work
enabled.
We can't use the IMAGE_MANIFEST var for the file path because that relies on IMAGE_NAME which
changes at every run (because of date), so we use the link which points to the last
one built.
[ YOCTO #5072 ]
(From OE-Core rev: f57c83fc33583c140f668946f3f3e79b960aa9ee)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tests for bitbake-layers and expected output for some bitbake options.
(From OE-Core rev: 8408a7700cd9cab4559ddae0bbe57f0d7fae5c37)
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Build images and tests different build options like RM_OLD_IMAGE
and for WARN_QA/ERROR_QA behaviour.
(From OE-Core rev: 75d2a1a37a18a22b0da7ab5b30cf005c78bc313f)
Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Everything in this layer is meant to be used by tests called by
scripts/oe-selftest. These are helper recipes/appends to test various bitbake
options or scripts.
Currently most of these files here only have "include test_recipe.inc" which
is the file tests will actually use.
(From OE-Core rev: 71a5053eea2aa0055663ccb2318eda866df49bb7)
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The purpose of oe-selftest is to run unittest modules added from meta/lib/oeqa/selftest,
which are tests against bitbake tools.
Right now the script it's useful for simple tests like:
- "bitbake --someoption, change some metadata, bitbake X, check something" type scenarios (PR service, error output, etc)
- or "bitbake-layers <...>" type scripts and yocto-bsp tools.
This commit also adds some helper modules that the tests will use and a base class.
Also, most of the tests will have a dependency on a meta-selftest layer
which contains specially modified recipes/bbappends/include files for the purpose of the tests.
The tests themselves will usually write to ".inc" files from the layer or in conf/selftest.inc
(which is added as an include in local.conf at the start and removed at the end)
It's a simple matter or sourcing the enviroment, adding the meta-selftest layer to bblayers.conf
and running: oe-selftest to get some results. It would finish faster if at least a core-image-minimal
was built before.
[ YOCTO #4740 ]
(From OE-Core rev: 41a4f8fb005328d3a631a9036ceb6dcf75754410)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't normally perform any operations (such as "git pull") that
trigger "git gc --auto", thus garbage collection never happens which
means performance of accessing the repository degrades noticeably over
time. Add an explicit "git gc --auto" to clean things up when needed.
Thanks to Elijah Newren and Ross Burton for suggesting this.
(From OE-Core rev: 4a45a999e0ad2e99581428a5a6d34f483c00544f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable several python functions if not parsing within the worker
context. This avoids executing expensive operations while parsing
recipes (which is unnecessary).
(Thanks to Richard Purdie for pointing out the issue and suggesting the
workaround.)
(From OE-Core rev: 540a2a30be21c3eca4323efbe91e7dcfc31a4c97)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use a function added to SSTATEPOSTINSTFUNCS and read the necessary
information out of pkgdata, instead of using a function executed
during do_package that reads the data directly. This has two benefits:
* The package info collection will now work when the package content is
restored from shared state
* Adding/removing the inherit of buildhistory will no longer change the
do_package signatures and force re-execution of that function for
every recipe.
Fixes [YOCTO #5358]
(From OE-Core rev: cd7f7efcd5f297d876823b8f579ecefb9542b089)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add PACKAGE_EXCLUDE and NO_RECOMMENDATIONS to the info we track for
images, since these can change what ends up in the image.
(From OE-Core rev: a10189366f180b87f5be20b66834b7e7a9bb8c12)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should have been removed when the implementation was rewritten in
OE-Core commit 2179db89436d719635f858c87d1e098696bead2a. The collected
values weren't being used anywhere since then.
(From OE-Core rev: cbc23a87c1897b7fda40f452dd36acb0bca3d197)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are important parts of the version for every package, so we should
include them in PKGDATA just as we include PV/PR/PKGV/PKGR.
(From OE-Core rev: 5ceed97ba02a698f1c260c3f56cdf2cc156e6d8b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were using "du -sk" to collect the total size of all files in each
package for writing out to PKGSIZE in each pkgdata file; however this
reports the total space used on disk not the total size of all files,
which means it is dependent on the block size and filesystem being used
for TMPDIR on the build host. Instead, take the total of the size
reported by lstat() for each packaged file, which we are already
collecting for FILES_INFO in any case.
Note: this changes PKGSIZE to be reported in bytes instead of kilobytes
since this is what lstat reports, but this is really what we should be
storing anyway so that we have the precision if we need it.
Fixes [YOCTO #5334]
(From OE-Core rev: 29615b36fca696822a715ece2afbe0bf9a43ed61)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The FILES_INFO entry in each pkgdata file stores the list of files for
each package. Make the following improvements to how this is stored:
* Store paths as they would be seen on the target rather than
erroneously including the full path to PKGDEST (which is specific to
the build host the package was built on)
* For simplicity when loading the data, store complete paths for each
entry instead of trying to break off the first part and use it as the
dict key
* Record sizes for each file (as needed by Toaster)
* Serialise the value explicitly using json rather than just passing it
through str().
Fixes [YOCTO #5443].
(From OE-Core rev: ca86603607a69a17cc5540d69de0e242b33382d3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie
Valentin Popa
Paul Eggleton
Ross Burton
yzhu1
Christopher Larson
Chen Qi
Nicolas Dechesne
Stefan Stanacar
Tudor Florea
Yue Tao
Corneliu Stoicescu
Alexandru Palalau
Scott Rifenbark