When adding a layer fails try to explain why to the user.
(Bitbake rev: 2f7eadfdd710f84a299d6fc7be67ddb089f03ecc)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use different return types when adding failed versus when the layer is
already enabled.
(Bitbake rev: 906854d75a12c8752efb1e4065eaf1a10b191612)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a CommandFailed event is seen emit a signal with the error message.
(Bitbake rev: 15cc4fe5051dcb6ac5915e10228b5f3d3ed845bd)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we receive the fatal-error signal from the handler display a dialog
informing the user of an error and displaying the error message. Dismissing
the dialog quits the application.
Fixes [YOCTO #1279]
(Bitbake rev: 04dbd80bbc9ffe2a566b8cc488f0feebadcdde60)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the cooker encounters an error we're unable to proceed so emit a signal
so that UI's can notify the user and exit.
(Bitbake rev: b6f6edd5090e933ac97a65f93ea9d1b255fca811)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Prevent the busy cursor being shown after hob exits if quit is called
whilst the busy cursor is set.
(Bitbake rev: 7b977ff222d4a318efabd0ca5f37fa03b9acb996)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to ensure only one value ends up in TUNE_PKGARCH rather than several.
This change ensures consistency accross all the PPC tune files and that they
correctly inherit the core value but also allow it to be overwritten.
(From OE-Core rev: f9a8b719dd3fc7593a509c8f288caf1486add2f8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes warning messages such as:
The providers found were: ['virtual:nativesdk:eglibc_2.13.bb', 'eglibc_2.13.bb']
The PREFERRED_PROVIDER entries resulting in this conflict were: ['PREFERRED_PROVIDER_virtual/libc-nativesdk = eglibc-nativesdk', 'PREFERRED_PROVIDER_virtual/libc = eglibc']
NOTE: multiple providers are available for runtime glibc-utils (eglibc, eglibc-nativesdk, external-csl-toolchain, external-poky-toolchain)
NOTE: consider defining a PREFERRED_PROVIDER entry to match glibc-utils
This highlights how ugly adding to PN is when using BBCLASSEXTEND. We need to do this to
eglibc so the nativesdk class continues to work correctly for now and ensure consistency
in how the various eglibc packages are generated.
Longer term, if we switch nativesdk to use the multilib approach and MLPREFIX, we can
remove all the PKGSUFFIX mess. I'd rather not get into changing nativesdk right at this
time though given all the other changes that are going on.
(From OE-Core rev: 3a18aa65a4c123ea922b6cd09ca6a77090f12252)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During SDK generation the multilib_sanity_check function is being called,
however it is not available unless we've been called from the image.bbclass.
Disable the check if MULTILIB_CHECK_FILE (also set in image.bbclass) doesn't
exist or is empty.
(From OE-Core rev: 0611cceca1595ea4656ebcb985cbd92bb9774ec8)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order for things to be easier to maintain in the future, sync up
the sdk and rootfs versions.
(From OE-Core rev: 3c78da15457d8d20c9964cd845f6e021d442aaae)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add SDK_PACKAGE_ARCHS to avoid the sed operations we were previously doing
inside of the variouns populate_sdk functions and related items.
Also add documentation to populate_sdk to explain when the various functions
are expected to be doing.
Finally fix a bug in populate_sdk_rpm where the wrong value was being set,
noticed while working on this change.
(From OE-Core rev: 587c1d5bac71fa6faa65ee3a271391cbf931e8f7)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
in packages_rpm.bbclass:
Cleanup the way package_update_index_rpm works. Break this out into two
functions, one for common functionality and one for controlling target vs
sdk package processing.
Similar change to package_generate_rpm_conf.
Usage of IMAGE_ROOTFS should actually be "target_rootfs", this fixes a problem
with the SDK case.
in rootfs_rpm.bbclass:
Minor re-order of the values, and avoid multiple uses of IMAGE_ROOTFS in order
to make the merge with the SDK behavior easier.
(From OE-Core rev: 46559f36d8a39655060b45d3d235de44a2c4c09b)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #671]
"readlink -f" in Ubuntu 10.04 is buggy: it doesn't ignore a trailing / (e.g.,
"readlink -f /tmp/non-existent-dir/" returns nothing, but according to
http://www.gnu.org/s/coreutils/manual/coreutils.pdf it should do that --
hence we get bug 671. It seems Ubuntu 10.10 or even later Ubuntu 11.04,
and other Linux distributions(e.g., Open Suse 11.4) haven't such an issue.
So I think we should detect this and ask Ubuntu 10.04 users to avoid supply
a path with trailing slash here.
Moreever, I also add the detection of non-existent path, e.g.,
source oe-init-build-env /non-existent-dir/build
can be detected and we'll print an error msg.
And, if we get errors in oe-buildenv-internal, we should stop the script
and shouldn't further run.
(From OE-Core rev: 651ccb3b031d9ccb8331505a51171372002230d9)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the grep regexp matches any occurance of
'TMPDIR=' but if you have another variable defined
e.g. OE_BUILD_TMPDIR=xxx then that gets picked up
too.
$ bitbake -e | grep TMPDIR=\"
TMPDIR="/home/kraj/work/angstrom/build/tmp-angstrom_2010_x-eglibc"
OE_BUILD_TMPDIR="/home/kraj/work/angstrom/build/tmp-angstrom_2010_x"
So we become a bit more stringent and look for
line starting with TMPDIR
$ bitbake -e | grep ^TMPDIR=\"
TMPDIR="/home/kraj/work/angstrom/build/tmp-angstrom_2010_x-eglibc"
make sure that it greps
only TMPDIR=xxx occurance and not values of other variables
whose names happens to end with TMPDIR
(From OE-Core rev: 12ddf6c6a7559d97d9b8f84fcc89ed02e30df85d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add some (namespaced) custom variables to the configuration file for sake
of this UI.
(Bitbake rev: c9dd2592434338bdddb3cc6f42e760c86fa9e6bb)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. reflect GPLv3's presence in INCOMPATIBLE_LICENSE value in the UI
The hob UI currently only supports GPLv3 as a value for
INCOMPATIBLE_LICENSE but doesn't properly reflect whether the value is
already set. This patch rectifies this.
2. don't stomp over other INCOMPATIBLE_LICENSE values when disabling GPLv3
In case the user has other values set for INCOMPATIBLE_LICENSE we don't
want to overwrite the value, we want to modify it.
Fixes [#1286]
(Bitbake rev: 68b992922bc7148d657a1c706c6acc67812a87c0)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fix the MLPREFIX referrence typo which cause multilib rpm
do_rootfs failure
CC: Mark Hatle <mark.hatle@windriver.com>
(From OE-Core rev: 9653089620ad5aef7876b582708561c3a315a064)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Earlier iterations of the multilib patch used "TUNENAME", which was later
renamed to DEFAULTTUNE. This file was missed in the rename.
(From OE-Core rev: fdd39925df8268ad41c1ff643a0761b03fad8e08)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its possible we get duplications if we explicity add TUNE_PKGARCH to
PACKAGE_ARCHS so instead just add a sanity check to verify it.
(From OE-Core rev: b2ae0444eb1984b86c02e571bb1efeaacdeafcf1)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All 64-bit PPC processors support hard-float so no need to support
soft-float.
(From OE-Core rev: 54c7d1faf5376c8fb9b19f4e192ce959c8442782)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When figuring out how to set TUNE_CCARGS we should look for 'm64' not
'n64' in TUNE_FEATURES.
(From OE-Core rev: 7a9ea28e69e8121a559f610dd2330edd33f0a907)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reads the sgml-docbook.bak and adds the entries into sgml-docbook.cat since
this occurs out of order during shared state sysroot populate.
(From OE-Core rev: 87d68520c190007869ed1877fbb40eef23763524)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch writes a sgml-docbook.bak that is read by the sgml-common during a shared
state sysroot populate, because it comes out of order.
(From OE-Core rev: b372198fe3c9d8be18bd15545fb0bc4dd9d5aa68)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch writes a sgml-docbook.bak that is read by the sgml-common during a shared
state sysroot populate, because it comes out of order.
(From OE-Core rev: 4d4047c7b997a9cee96f170c203315cbd82ff084)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch writes a sgml-docbook.bak that is read by the sgml-common during a shared
state sysroot populate, because it comes out of order.
(From OE-Core rev: 457f30a389031947f037bd7ea1217c190c2089c1)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The do_archgen step creates a script that utilizes the variable name
${ARCH}. However, we also utilize and define ${ARCH} so instead of
having the following in the script:
COMPAT_WITH="${ARCH},${COMPAT} $COMPAT_WITH"
We get something like:
COMPAT_WITH="powerpc,${COMPAT} $COMPAT_WITH"
Just renaming the variable in the script to not conflict with ${ARCH}
fixes the issue.
[PR bump from Saul Wold]
(From OE-Core rev: 09573a276456122b408c5bcebc537455fd1c5f29)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Glibc 2.10.1 is outdated now and eglibc seems to provide a superset of
its functionality.
(From OE-Core rev: 1d9866a2c4fe93202749a56c7ad89a3cbd07d9f8)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed [BUGID #1299]. OLD_MULTIMACH_TARGET_SYS is no longer available.
Use new recipe-scope variable REAL_MULTIMACH_TARGET_SYS instead.
(From OE-Core rev: b69a2be2f30dc633597399d42d6c87d9f0910c1a)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PACKAGE_EXTRA_ARCHS_tune-armv5eb needs to be defined in terms of
the non-e with the same endianness, i.e. PACKAGE_EXTRA_ARCHS_tune-armv5b
not PACKAGE_EXTRA_ARCHS_tune-armv5, otherwise PACKAGE_EXTRA_ARCHS will
end up containing a semi-random mixture of endiannesses and disaster
will ensue. Likewise for the vfp and armv6 variants.
This is all a bit confusing because TUNE_FEATURES is done the opposite
way around, i.e. TUNE_FEATURES_tune-armv5eb is derived by taking the
armv5e version and adding bigendian. But fixing that is probably
a subject for a separate patch.
(From OE-Core rev: 391c0102a81455c76244d13b6878e3a76cca65dc)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise the test in TUNE_CCARGS will never match.
(From OE-Core rev: 3b7784021259ac745c80043bec16189fa8f4e45e)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because of the way BitBake handles ??= under certain circumstances, this
default setting ends up stepping all over the real setting from the arch
include file. Since virtually all arch include files or tune files define
a real value for this we shouldn't need to have a default (or it needs to
be done in a different way).
(From OE-Core rev: 6c43ca6fc6a7fffc84cf28684cac0c0eb4129902)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As the staging of linux-yocto-3.0 showed, we should explicitly
state our preferred version of linux-yocto. This prevents unvalidated
changes from being forced into machines. Layers and machines are free
to override this as they are updated.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
A previous patch changed the default TERM to use xterm. This updates
local.conf.sample to match the change
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the specified PREFERRED_VERSION is not available then list the
available versions in the output. (PR is omitted.)
(Bitbake rev: eea5ff9f34bb9b2e29f5fa43deb80d4aa6ef7ddc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This looked like a copy-paste error - the code around is dealing with
depends and not rdepends.
(Bitbake rev: bb688635c2050da3cbbaa5aa5b00e882887695de)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"Nothing PROVIDES" errors often come up when a recipe has been skipped
for some reason, and therefore it is useful to print out that reason
information when showing the error so that the user understands why the
error has occurred.
Given that we already feed the reason information into the skiplist for
various situations (COMMERCIAL_LICENSE, COMPATIBLE_MACHINE etc.) this
should now output a useful error message for skipped recipes.
Fixes [YOCTO #846], [YOCTO #1127]
(Bitbake rev: 6765218430e31c165888f26fbc75023c89a6eab2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
reload_data after package format change to make the change take effects in
next build.
Fixes [YOCTO #1287].
(Bitbake rev: fb47c7452455f3f8d943b21dd61300ec55eea141)
Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The rdepends-pkg field of the generated depend_tree model was not populated
in the original implementation of this method, this series adds in the
loop to populate the rdepends-pkg column of the model.
(Bitbake rev: 4f9a6f6f43cf2ef38115285897fbbde01964e892)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The signal handler of the 'Base image' combo was still connected during load
such that updating the UI to reflect the loaded base image triggered a change
of the model. Fix this by disconnecting the signal handler when updating the
displayed 'Base image'.
Fixes [YOCTO #1282]
(Bitbake rev: 58036a79cb79d1dff307e2cfed0e684493178507)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The mark() method, which removes dependent and rdependent items, is overly
aggressive removing items which are actually required by user selected
items and then causing a removal of those items. Because the data
structures used are not fine grained enough to do more intelligent
dependency tracking the simplest "fix" is to track removals which are
marked as "User Selected" and re-add those (and therefore their
dependencies) once the aggressive removal is completed.
Because the aggressive removal already ignores images and tasks this should
make the removal behave as expected though certainly leaves area for
improvement in future.
Fixes [YOCTO #1280].
(Bitbake rev: 1e1055262450de994202fc3e5943b8b19f628681)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ghostscript fails some time on autobuilder, it seems a parallel build issue.
Add patch to fix it.
Fixes [Yocto #1202]
(From OE-Core rev: 90c0eabcce04e8358ce8df9cd9ed60fdeea68cf5)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joshua Lock
Richard Purdie
Mark Hatle
Dexuan Cui
Khem Raj
Koen Kooi
Yu Ke
Kumar Gala
Malcolm Crossley
Saul Wold
Phil Blundell
Lianhao Lu
Martin Jansa
Dmitry Eremin-Solenikov
Paul Eggleton
Bruce Ashfield
Matthew McClintock
Jessica Zhang
Kang Kai