By default the linux-yocto recipes operate on the current branch
and use it as a trigger to locate the description of a board. This
model works well when using the git repo outside of a build system
since the commands can be simply invoked and will do something
useful. However, it does mean that you can't have two BSPs that
differ only by configuration, building out of a single branch
in the repository.
This means that you must have many branches for very similar
BSPs. This model is still preferred, but having the choice of
branching strategies is better.
With this change we can have multiple BSPs using a single branch
with the preferred description being hinted from the build
system by passing the $machine value to updateme/configme.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
When using sendmail to send patches, patches would appear to be from the
original author as git adds a From: header in the generated patches. This patch
changes this behavior to match that of git-send-email, where the email From:
header is that of the current sender (according to sendmail) and a "From:
Original Author <email>" line is inserted into the body of the message.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Darren Hart and I discovered that when $CC is set (which
our meta-toolchain environment script sets up), the value
leaks into the use of this script. Unsetting $TO as well
just to be thorough.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Updating beagleboard SRCREV to pickup:
commit 8e15b884ecf768fd9f898da5acf24938dfe81a83
Author: Koen Kooi <koen@beagleboard.org>
Date: Tue Jan 11 17:13:35 2011 +0000
omap3: beaglexm: fix EHCI power up GPIO dir
commit a5624323866c06156ca548b8515d9347fdd5188e angstrom-linux
EHCI enable power pin is inverted (active high) in comparison
to vanilla beagle which is active low. Handle this case conditionally.
Without this fix, Beagle XM 4 port EHCI will not function and no
networking will be available
[nm@ti.com: split up, added descriptive changelogs]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Koen Kooi <koen@beagleboard.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Updating the meta branch to contain the latest crownbay
configuration tweaks.
e1f85a4 wrs_meta: turn on OHCI USB config option
8be8e45 wrs_meta (crownbay): turn on AHCI SATA option
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bumping the SRCREV to pickup some missing functionality:
ebbca89 omap: Beagle: no gpio_wp pin connection on xM
671fd89 omap: Beagle: only Cx boards use pin 23 for write protect
dccdf8a omap: Beagle: revision detection
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
This ensures package runtime dependencies are up-to-date after splitting
out libuuid and libblkid in util-linux recipe
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Qing He <qing.he@intel.com>
gst-plugins-base requires libuuid, so add util-linux to DEPENDS.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Qing He <qing.he@intel.com>
The newer binutils recipe of version 2.21 has a fix for ld which avoids an
issue where weak symbols like pthread_cancel were causing linking to fail wh
--no-add-as-needed parameter was passed to ld.
See more information here: http://bugs.debian.org/591405
This makes some of the fixes for breakage after gcc dso linking change
unnecessary and this is one of them.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
The newer binutils recipe of version 2.21 has a fix for ld which avoids an
issue where weak symbols like pthread_cancel were causing linking to fail when
--no-add-as-needed parameter was passed to ld.
See more information here: http://bugs.debian.org/591405
This makes some of the fixes for breakage after gcc dso linking change
unnecessary and this is one of them.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
The newer binutils recipe of version 2.21 has a fix for ld which avoids an
issue where weak symbols like pthread_cancel were causing linking to fail when
--no-add-as-needed parameter was passed to ld.
See more information here: http://bugs.debian.org/591405
This makes some of the fixes for breakage after gcc dso linking change
unnecessary and this is one of them.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
psuedo needs a full path to its pid file, so convert
relative extract-dir paths to full ones.
The symptom of this bug is receiving the following error:
pseudo: Couldn't open relative/path/to/var/pseudo/pseudo.pid: No such file or directory
This fixes [BUGID #670]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
If build from sstate results, the ${D} will not be installed. In this
case the creation of ipk package will be skipped, which will cause
the build failure.
Fix the issue by removing the judgement of ${D} existence.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Original we used absolute path in sysroot-destdir for both native and
target recipes. This commit changes target recipes to use relative path
which is same as the image directory.
[sgw: merged with libtool sysroot work]
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Document the install and boot process for the Beagleboard xM with
provisions for the C4. I need someone with a C4 board to validate
the steps.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
CC: Scott Rifenbark <scott.m.rifenbark@intel.com>
This repository is stale, the u-boot_git.bb recipe uses the upstream
repository. Remaining machines using this recipe have already been
converted to using u-boot_git.bb.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
In preparation to remove the u-boot-omap3 recipe, update the overo
machine to use the new upstream u-boot recipe.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
The Beagleboard xM requires x-load and u-boot to be installed
on the MMC as it has no NAND (as of rev B and onward).
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
uboot-omap3 appears to be fairly stale (last commit in April 2010) while
the upstream u-boot is making regular tagged releases. Add a new recipe
using the upstream u-boot repository.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
TI is now maintaining an upstream x-loader git repository and
sakoman will no longer be maintained. Current upstream
includes signGP and incorporates it into the Makefile. The new
Makefile ift target builds the universal MLO binary. The armv7-a
patch is included.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
current bitbake-diffsigs simply print out the whole 'runtaskdeps' when there's mismatch, which
is not very readable. On the other hand, 'runtaskhashes' comparison is broken which assumes
same key existing in two sides. This commit provides better output by figuring out differences
from addition, removal or hash change.
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
* The spurious paths were caused by a -L on commandline which pointed to
build dir. So we dont use -L <wordir> -liberty instead use the
libiberty.a directly on commandline effects are same but .la does not
have the workdir path in deplibs
Patch obtained from OpenEmbedded, written by Khem Raj.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
* Upgraded binutils to v2.21
* Incorporated libtool sysroot patches from OE
* Removed patches no longer needed or obsoleted by OE patches
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
libtool v2.4 --with-libtool-sysroot eliminates the need for
la mangling.
Based on Khem Raj's OE commits.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
We do not do it for native recipes, as the native compiler should
fall back to a prefix of /usr and not solely depend on the sysroot.
Otherwise we end up staging everything in the native sysroot before
we start to build target recipes.
Also remove la mangling code, which is no longer necessary.
Commit derived from Khem Raj's OE commits.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
