[YOCTO #6309]
It appears a logic issue has caused rpm -V to no longer
verify the files on the filesystem match what was installed.
(From OE-Core rev: 117862cd0eebf6887c2ea6cc353432caee2653aa)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder
to bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
If possible try to use any of the default FILESPATH dirs.
Also remove superfluous comment and do minor indentation fix.
(From OE-Core rev: 57109e59abb7c6af029f452d06b46f47084cff11)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
(From OE-Core rev: ae8711bc2952e96ac3434624548a3dbfd501ec7f)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
However in u-boot no FILESPATH additions are currently needed so
instead it should be removed.
(From OE-Core rev: f8675ffa3f90d4e411a82d33ac8319f2c4c19235)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the
path. Don't migrate paths that already exist in base FILESPATH to
FILESEXTRAPATHS.
(From OE-Core rev: 00cbfadbf402ad1462ec0c8eaaaefa9a225a4aa7)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
(From OE-Core rev: 879ff7e931a80fd090db4485b6b6dee8e4c71d30)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend.
(From OE-Core rev: 6ffd023085f8918b7967e8b7de674f0411220382)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
However in nativesdk-qemu-helper no FILESPATH additions are currently needed so
instead it should be removed.
(From OE-Core rev: cd35938fa4fac4451da3ef32626988c51ed8c021)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
Also remove unused filespath addition.
(From OE-Core rev: de37e4d7f995a0032d016c621c35ef1f79daa8ae)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
(From OE-Core rev: ff700e01bc0639b67eb2934340b71c37d518a941)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4497]
Refactoring recipe to avoid duplicated entries in trace-cmd and
kernelshark bb-files. Also remove usage of FILESPATH and split package
unique patches into separate dirs.
(From OE-Core rev: bc57d7041e126850245e4a5ab0211979b49b97ff)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
However in gstreamer no FILESPATH additions are currently needed so
instead it should be removed.
(From OE-Core rev: aea206132384419f7f7c3514f9035eded1c5ef93)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
(From OE-Core rev: 435dc012734669889b12e7bbd5364e24bbace098)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
(From OE-Core rev: 20de1b4d28f165593e86ee52211ebb595da4c01f)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to pass CFLAGS and LDFLAGS to the makefile correctly so we
need to list them as part of EXTRA_OEMAKE.
We also have a problem where git hardlinks binaries in bindir with
those in its libexecdir. If we change the RPATH in one of them, it
breaks the other. We therefore set the no cross dir hardlinking flag
git already has for this kind of issue. This ensures the RPATHS for
the git-core binaries works correctly. Its pure luck this has
sometimes worked so far.
(From OE-Core rev: 64c6ae6a69215b659b82c67e238bc0fbc09a3eab)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd version 212 removed the TCP wrappers support, so remove the
PACKAGECONFIG stanza for it.
(From OE-Core rev: 2e7ce6b537035bfac6742214b3b2f987963fba3c)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Inherit lib_package so that the newly added binary doesn't ship in the library
package.
(From OE-Core rev: 8b2d20624af0dd4cbbfd317c219e67cbabad833a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These patches were authored by Koen Kooi in oe-classic commits:
443f6022df06d9f9dc221011c1744274deff2c2c
19a4b765a694c070bc50477026cda03143af34df
As the patches haven't changed since, add his SOB.
(From OE-Core rev: 355674b2033143eb992a9f775a848ed22831e383)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop tests-check.patch as it has been merged into this release.
License checksums updated as the FSF address was changed.
(From OE-Core rev: 99b91a43962e4f40d9593053f252603d5a7ae842)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also drop the redundant definition of S.
(From OE-Core rev: f5d13a8581ca50dcf9707d4e1ca0bd63fcba29c3)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patches Fix-Werror-format-string, gio-test-race, gtest-skip-fixes, and
ptest-dbus have all been merged upstream.
Two license checksums changed as upstream has updated the FSF address in those
files.
(From OE-Core rev: b755139b8112b425ff0a21f121104b7d212e7143)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
GLib 2.40 adds g_ptr_array_insert, but gst-openmax is definining that as a
static helper function. Rename the static function so it doesn't conflict with
GLib's namespace.
(From OE-Core rev: f453cd989b47677b863acda7a4627636f66436f4)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the SDL configuration option for qemu floats. This is confusing to new users
and makes the build non-determinstic. This patch adds a PACKAGECONFIG option, defaulting
to off and adds documentation to local.conf.sample leaving it on by default since this
is the configuration our quick start assumes.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* fixes following issue in test-dependencies report:
gstreamer1.0-plugins-good/gstreamer1.0-plugins-good-ximagesrc/latest lost dependency on libxdamage
(From OE-Core rev: 23521fccb122b64f3469d46176f73fe476b0dfc5)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* fixes following issues from test-dependencies report:
gst-plugins-good/gst-plugins-good-ximagesrc/latest lost dependency on libxdamage
(From OE-Core rev: 8da4462b04bdce101efd989ed6b41d88d213baa0)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the renaming of the cross packages, its no longer possible to use
endswith("-cross") and similar to detect cross packages. Replace these
references with other techniques.
This resolves certain build from sstate failures which were due to the
system believing cross packages were target packages and therefore
dependency handling was altered.
(From OE-Core rev: 91edf4cac223298e50a4b8e59dd19f1b272e3418)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building multilib, we also have to add the multlib prefix otherwise
we get a WARNING:
WARNING: Multilib QA Issue: lib32-dbus package lib32-dbus - suspicious values 'initscripts-functions' in RDEPENDS
[YOCTO #6164]
(From OE-Core rev: 2e14dbb7f85532220f9aec293ddd4143fae8407b)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
cyclictest was updated to correct some problems with CPU affinity selection
and display of help and/or execution details.
These patches were accepted by the maintainer of the cyclictest utility.
The changes were reflected in an updated release of rt-tests - v0.89
The cyclictest changes were successfully tested on both an ARM v7 and x86_64
host environment.
The OE recipe was updated locally to incorporate the newer rt-tests release
and the resulting builds were verified for the same ARM v7 target
and for qemux86.
Patch files obsoleted by the rt-tests 0.89 release were removed from the recipe
deleted: meta/recipes-rt/rt-tests/files/0001-rt-tests-Allow-for-user-specified-PYLIB.patch
deleted: meta/recipes-rt/rt-tests/files/0002-rt-tests-Break-out-install_hwlatdetect.patch
deleted: meta/recipes-rt/rt-tests/files/added-missing-dependencies.patch
(From OE-Core rev: 7996ca20c24157aee259bfa88b6d7743511d5eff)
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Gary S. Robertson <gary.robertson@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Do not include openssl glue in the benchmark program.
This should fix a compile issue on multilib.
(From OE-Core rev: 22c90592347582854410b95db8b7765c85c1568b)
Signed-off-by: Valentin Popa <valentin.popa@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When there is a '..' in the rootdir path, rootdir will not be a substring of
fpath. This causes an incorrect rpath of the difference between the workdir
and the sysroot to be computed, which is incorrect. Normalizing basedir
fixes this issue.
(From OE-Core rev: 753cfcadd8cc683e69b6707b823dc49dfb34ab0b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "check" module is checked for in configure without any way to explicitly
enable or disable it, but it isn't a build dependency of libxcb. If it's found
libxslt is also checked for, which is a build dependency but will only be used
if check is also present.
As the libxcb unit test suite is minimal at present, forcibly disable the test
for check and remove the libxslt-native build dependency.
(From OE-Core rev: 510e64d90d3ef2f9757bfa148e8cc09e4834051d)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also add Upstream-Status to gtk-option.patch
(From OE-Core rev: aa983d9117d2ddc0906aafdb7a9e584097475275)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When compiling util-linux, it's possible to encounter the following error.
/bin/sh: line 2:: misc-utils/uuidd.8.tmp: No such file or directory
This is because that the misc-utils directory doesn't exist when trying to
write to misc-utils/uuidd.8.tmp.
When generating misc-utils/uuidd.8 (or anything in PATHFILES), its directory
may not have been created yet. So we need to ensure the existence of the
directory to avoid the compilation error.
[YOCTO #6292]
(From OE-Core rev: b8c0a4f6a319a7cf84530b891707a5887f3caaf4)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* The SRC_URI is not accessible.
So need to add mirror site referred by the original site.
* The problem is that
http://download.savannah.gnu.org/releases redirects to closest mirror
and few mirrors (e.g. .jp) weren't working correctly while
http://download-mirror.savannah.gnu.org/releases/ seems to be reliable.
* Add SAVANNAH_GNU_MIRROR and SAVANNAH_NONGNU_MIRROR variable in bitbake.conf.
* Change the SRC_URI using the new variable.
(From OE-Core rev: af00b6544f60e4d7581f9d9767f9d3f574392359)
Signed-off-by: Changhyeok Bae <changhyeok.bae@lge.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
attr needs libintl headers and libs. Add in the missing dependency and
ensure the linker flag gets passed in multilib builds by replacing the
PN == BPN check with a class-target override instead.
(From OE-Core rev: c19fb913006eb53025e5db1574d973c8d7ceec76)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to handle the UCLIBC_* linker variables in the same way
as we do the GLIBC_* ones to allow uclibc multilib to work properly.
(From OE-Core rev: 025ec5958b7e1fd71caa0079ec3c573126b30886)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The /var/log/messages reports /var/log/lastlog as missing, since openssh
needs this file, create it as a volatile.
[YOCTO #6172]
(From OE-Core rev: a29af8c20187a65fbdbbedd0b7158c07d3e713cf)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade sudo from 1.8.9p5 to the newest stable release 1.8.10p2.
The license checksums are modified as required, because the doc/LICENSE
file now declares that compat/inet_pton.c bears the ISC license.
As /var/run/sudo is the default directory for sudo's time stamp
files, this patch adds a configuration file to manage this directory.
(From OE-Core rev: af625d2f78a24dac96d11f159569f6465a534dfd)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was discovered that libxml2, a library providing support to read,
modify and write XML files, incorrectly performs entity substituton in
the doctype prolog, even if the application using libxml2 disabled any
entity substitution. A remote attacker could provide a
specially-crafted XML file that, when processed, would lead to the
exhaustion of CPU and memory resources or file descriptors.
Reference: https://access.redhat.com/security/cve/CVE-2014-0191
(From OE-Core rev: 674bd59d5e357a4aba18c472ac21712a660a84af)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I will mark Inappropriate because the patch replaces some functions
unavailable in older versions of glibc.
(From OE-Core rev: fe19e4d13a645efccd778cfd3a7b55fe74498d60)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch is not included in 1.0.1g, but it is included on 1.0.2
branch.
(From OE-Core rev: f99ca886da274fafa212e354f9e4871eb7e59e87)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add "sed" in the ptest runtime package dependency list
[YOCTO #6260]
(From OE-Core rev: 5506333737f7e3c98d165b1025ef6c5301b16d50)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
x-load has been superseded by u-boot SPL for all cortex based TI SoCs.
For legacy boards meta-ti layer (that contains a maintained recipe)
should be used instead.
(From OE-Core rev: 3a675df3dd608b6e7250a3b0bfc9362d2f4e8aa9)
Signed-off-by: Petter Mabacker <petter@technux.se>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
baselib contains the current "lib" value so pass this into
uclibc's configration to allow multilib builds to work correctly.
(From OE-Core rev: 665b03b338d8d710250bd92d6b9a227255f808f8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, uclibc builds fail with libtool version mismatches. The issue
is that we need to remove the files in ${S}, not ${B} which is now
the default after the B != S change.
(From OE-Core rev: 054151c77dae51e2826eeac9b9ae2de3a08f0bb6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some classes of recipe disable ptest even though its in DISTRO_FEATURES
(e.g. nativesdk). We shouldn't attempt to build ptest packages when
its disabled. This replaces some DISTRO_FEATURE checks with PTEST_ENABLED
checks instead.
(From OE-Core rev: 8b14fcc62f31bbbb231790136cdb984db96d9ba9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The release for 1.2.1 is on branch stable-1.2.
Backported a patch to fix out of tree build.
(From OE-Core rev: 699d6c02140a37262d8e5daf29143db22a5a5d0b)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch fixes mmc-utils compilation failure for qemumips64.
Remove the 'include <asm-generic/int-ll64.h>' line from mmc.h,
because this file is automatically included if _MIPS_SZLONG
is not 64, otherwise, <asm-generic/int-l64.h> is included.
Expicitly including <asm-generic/int-ll64.h> will cause the
compilation failure for mips64 target.
[YOCTO #6267]
(From OE-Core rev: 5477cc86015be24cc5b232ac1f8c67cd8b65a740)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Module::Build depends on Module::Metadata (since perl 5.13.9).
Module::Metainfo is only a wrapper for Module::Metadata.
See discussion in http://patches.openembedded.org/patch/66233/
(From OE-Core rev: 3babe5704fbda62920ec17a910d0f3fe9f468229)
Signed-off-by: Tim Orling <TicoTimo@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A null pointer dereference bug was discovered in do_ssl3_write().
An attacker could possibly use this to cause OpenSSL to crash, resulting
in a denial of service.
https://access.redhat.com/security/cve/CVE-2014-0198
(From OE-Core rev: 580033721abbbb4302bc803ebc70c90e331e4587)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The newer sysconfig module shares some code with distutils.sysconfig,
but the same modifications as in
12-distutils-prefix-is-inside-staging-area.patch
makes distutils.sysconfig affect the native runtime as well as cross
building. Use the old, patched implementation which returns paths in
the staging directory and for the target, as appropriate.
This change reverts this upstream patch
http://hg.python.org/cpython/diff/712970b019f7/Misc/python-config.in
(From OE-Core rev: 7b2ffd68ae8235dcc3ddff9cbe8525e61f3b3d28)
Signed-off-by: Tyler Hall <tylerwhall@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If python2 and python3 are both available, scripts that are subject to
this substitution can possibly run with the wrong python version.
python3-config is one such script.
(From OE-Core rev: 23849347d0fe60a01578efdd6c6e23ebb444dcd6)
Signed-off-by: Tyler Hall <tylerwhall@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently sed command touches every single *.py file. This modifies the
timestamp of the file. All *.pyo files will be recompiled during the first
boot, because timestamp will not match. This should be only necessary if
sed command changes the file.
(From OE-Core rev: 2d01c5a4989dcf03a202c27730a2a8f334e0c37a)
Signed-off-by: Radek Dostal <radek.dostal@streamunlimited.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that gcc-cross, gcc-crosssdk and others have expanded variables in
their names, the code that previous just applied to cross-canadian needs
expanding to cover the other cases. Improve the conditional and also
fix a bug where the multilib prefix wasn't being added into the generated
versions.
(From OE-Core rev: d2b18d7692229d4b87b38becf173b1f8b6e90025)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also drop an obsolete gcc-cross-intermediate reference.
(From OE-Core rev: d807e87708d5e4dc9267aa1611ba7ad7beec1d40)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recently we renames the cross compilers as well as spun out
libgcc-initial from gcc-initial out. We need to also express
it in default tcmode otherwise defining GCCVERSION and/or BINUVERSION
outside OE-Core does not cover all cases
(From OE-Core rev: 82813d27640549255dc81a15d7fb63688431f747)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Importing the mei meta data change from the yocto 3.14 kernel tree.
(From OE-Core rev: 2a39c6c11d9438a6d9cab9255e69c52779709e3e)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We allow inheriting recipes to control the kconfig mode used by merge_config.sh
via the KCONFIG_MODE variable. An error crept into the variable reference, and
since it is not quoted, the true condition always runs.
The result is that operations without an explicit kconfig mode cannot trigger
allnoconfig for defconfig builds, which can result in some options being
dropped from the final .config.
Quoting the reference allows it to evaluate properly.
(From OE-Core rev: aad19e4381a8a09c354e5899885997c5b4cd115b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
make ldconfig default to /lib+/usr/lib, /lib32+/usr/lib32 and
/lib64+/usr/lib64 on bi-ABI architectures.
(From OE-Core rev: c90bb98d4ac14562ef4882691daed3aaa9d08504)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In poky with systemd enabled, vt102 is selected for getty
causing user to experience a very crappy terminal. Default
TERM to xterm.
Reviewed-by: Jonathan Liu <net147@gmail.com>
(From OE-Core rev: 473ff65c2f69de4ece3204fadfae7c5cb992149a)
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Install gdbm test-suite and run it as ptest
(From OE-Core rev: aaba69d598763831e8b42996154ed87d0db10714)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gnutls doesn't depend on libgcrypt anymore but
wpa-supplicant does. So add it as a dependencie.
(From OE-Core rev: b5e0e0589dba0e3eb6fa070594c904fec6e6c3a8)
Signed-off-by: Valentin Popa <valentin.popa@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removes not needed or already merged patches.
Removes unused configure flags.
Tells gnutls to use the included libopts.
Removes libextra (not needed since 3.0.5).
(From OE-Core rev: 4e360033579b9501449798b2d118f786816a557f)
Signed-off-by: Valentin Popa <valentin.popa@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the move from meta-oe to OE-core XDG based launched was dropped
without noting it in the commit message, so fix that regression.
Gnome-session will now launch the calibrator again.
(From OE-Core rev: 64e0c8a7585a36964988f2f00ac89eda514d5f7b)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's being used by e.g. gnome-session when Terminal=true is set in
.desktop files, like xinput-calibrator does.
(From OE-Core rev: 9a821d80b732a52574ac5c20b323966811828852)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It gets its wrong in detecting 64bit options
and OE we already pass the right options as compiler
defaults
(From OE-Core rev: ec3add1752a410fada04b4788c142b91ef63ffa3)
(From OE-Core rev: 32b826720626ec2d426ff7dbfe5607bc0dbd8082)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the structure to work with immutable bio_vecs
(From OE-Core rev: 09d3d8f97d6c60707b8dfb3fa5b04fa2efe6f6f6)
(From OE-Core rev: b32d57e5a807a634c411628af1688aec960ac6e7)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to use gcc-nm and gcc-ar to deal with slim objects
which are generated when using -flto
(From OE-Core rev: e6d84c9f4fef201217ada60711ecfb94bc5dc2e0)
(From OE-Core rev: 56dc32f128b3029c38381c7cc81f244fbd77416e)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patches explain the issue in detail but this is exposed
with gcc 4.9 in binutils 2.24
(From OE-Core rev: fc5c467b680fc5aef4b0f689e6988e17a9322ae0)
(From OE-Core rev: 4dfb8847ebf8aab90ad8888933468e2899c96998)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix upstream bug
https://bugs.freedesktop.org/show_bug.cgi?id=77060
gcc 4.9 now generates slim objects when LTO is used
These slim objects only contain intermediate language
representation for LTO. Use -ffat-lto-objects to create files which
contain additionally the object code. When linking some .so file, the option
'-flto' is missed, so the error happens.
We add '-ffat-lto-objects' flag to make gcc 4.9 behaves the same as gcc 4.8.
(From OE-Core rev: c4e65e14fbdf957aa34e074337c5649a0b0888b7)
(From OE-Core rev: 858f01ab9613c2b122718c350da763f8fe981d9f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The scripts extact variable values from bitbake -e. Unfortunately
TARGET_ARCH is unset from that environment so we use TUNE_ARCH instead
which will have the value we need.
(From OE-Core rev: b77494025b3d47fd5130ae6c445ac84cabb1f91e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mkhelp: generate code for --disable-manual as well
This allows configure --disable-manual to run and build without having
to regenerate the src/tool_hugehelp.c file which otherwise is necessary
since we ship tarballs with that file present.
(From OE-Core rev: 544a96255203a6779d1f0022d003c6680f330511)
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a fix about to go into bitbake to ensure that datastores
being accessed with a name other than "d" are correctly reflected
in checksums. This will cause this function to add in a number of
dependencies we don't want.
These do need to be properly unravelled in due course but would
only really affect multilib builds. For now therefore just exclude
the variables as per the old behaviour.
(From OE-Core rev: cbc41a573dd3a073e7b862ca9d763ce815e8f927)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows us to remove the following uses of PRINC in meta-raspberrypi:
recipes-bsp/formfactor/formfactor_0.0.bbappend:
PRINC = "1"
recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend:
PRINC := "${@int(PRINC) + 5}"
(From OE-Core rev: cffbd11d915fe8a1399f23c97c4e2ecbdae4d00a)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The class itself currently does nothing. The idea is to mark all recipes that
make use of the texinfo utilities. In the future, this class could be used to
suppress the generation/formatting of documentation for performance,
explicitly track dependencies on these utilities, and eliminate Yocto's
current dependency on the host system's texinfo utilities.
(From OE-Core rev: e6fb2f9afe2ba6b676c46d1eb297ca9cc532d405)
Signed-off-by: Max Eliaser <max.eliaser@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Within the OE build environment, we supply the correct fpu settings. These
only need to be spelt out for the on-target gcc.
Doing this means the checksums for the core compiler don't depend on the fpu
settings. We exclude the compiler tunes for similar reasons, it doesn't need
to influence the compiler build.
(From OE-Core rev: ce1f3fd20d81545d6d5dfc68f86f9fddf8ac9bbf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we no longer build target libs within gcc-cross, we can drop the
TARGET_CC_ARCH flags and hence make it independent of tune.
(From OE-Core rev: 74d8866814aec520822518cc4cb8a942f7069bf7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The PKG_CONFIG definitions should now more closely match those from native.bbclass.
We can't use ${libdir} here since it contains the target arch prefix.
(From OE-Core rev: aebb71afe54b266de39ec7e1caf84e6426aaafba)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gcc-cross technically depends on the C library however we can use
one toolchain for multiple different tunes within a given architecture.
Manually remove these dependencies so that gcc-cross isn't rebuild with
every tune change.
(From OE-Core rev: 97df4e8e61a7693d548c3145e36f1d5503e91d03)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Unfortunately expandKeys() notices overlap between the SDK and TARGET
PREFERRED_PROVIDERS entries when we set things up for the SDK recipes.
To avoid this, delete one of the sets of keys to avoid supurious warnings.
(From OE-Core rev: 9068a65baf4a28d04efad9297b16a2883ac42689)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should be explicit about the providers for the SDK toolchain so
add entries to do this.
(From OE-Core rev: fba380a2a37f04de04c0626c0a09cfe757c24341)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The metadata started using the bb.utils.contains_any which has been
add in the BitBake 1.23.0 release, set this as the minimal version to
ensure parsing compatibility.
(From OE-Core rev: dea40c2850a32b5b67e90336f9565889f92dabe8)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update PREFERRED_PROVIDERS after cross tooling name change to include PN.
Also drop the now obsolete gcc-intermediate which no longer exists.
(From OE-Core rev: 5cbb5c12a5656915c3c9752187b54ef095d42828)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For use outside of tests themselves, we want a better error than
AssertionError, so create one and allow us to request it when calling
runCmd(). This enables us to avoid tracebacks during master image
operations if the power control command fails.
(From OE-Core rev: 89868383685091b0d3723fb8f29590f3f6610078)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we couldn't start the target, it doesn't make sense to try and stop
it here since logically it shouldn't now be in any kind of "started"
state. (It's the start function's job to clean up after itself if it
fails - to that end, fix up the QemuTarget class so that it does.)
(From OE-Core rev: 819ebddae6b78120e5e082423793ff988419b5c4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of powering up the target when the object is constructed, wait
until deploy is called. Then there are basically two different
scenarios:
a) The device is booted into the master image already, in which case
we can just use it
b) The device is booted into another image or can't be contacted, in
which case we need to power cycle it. Here we also now wait until it
has booted up instead of trying to contact it immediately.
(From OE-Core rev: c2257fa50071e4704a8152b5f1d16f899b4bed98)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Similar to power control command, this depends on a user's setup to get to
the serial port of a board. For a local connected board this could just be:
TEST_SERIALCONTROL_CMD = "picocom /dev/ttyUSB0 -b 115200"
and for a serial console server: "telnet 10.11.12.13 7003" or some conmux
command.
(From OE-Core rev: 5131094ad8f53b2052a97efd505e7a170d0c915d)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
And drop the un-needed and un-used restart methods.
Only qemu ever used this and actually does it safely.
(From OE-Core rev: 1dd1edb5ea551c8a01538b130aa4d0c361eae14d)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Right now GummibootTarget is the only hardware TEST_TARGET with deployment,
but we will add more, so let's make an abstract base class, that will
do the common thing for all the hw targets.
(From OE-Core rev: 1d70b1908e1dc5d612b0627022659639e3f384e5)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Regardless of the numbering used in source archive filenames, the
upstream version number is in dotted form in documentation, release
notes and the website, so we need to be using that here since that is
what people will expect to see.
(From OE-Core rev: b8f82a8808b0d217815b30ed06efc8a0be4494a5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the following patch(es):
* sysroot-arg.patch (changes included in release)
Correct the fccache.c license checksum and the line numbers because the
license snippet has moved and, also, at the previous upgrade the lines
were wrong (shifted a couple of lines).
(From OE-Core rev: cc337329309a6ad94a68b2813211a15040638c00)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add in the TARGET_ARCH and SDK_ARCH suffixes from the gcc-cross changes.
The -intermediate toolchain parts were canned a while ago so drop them.
(From OE-Core rev: 8a733097bddcf0868fb5f8ca08ea59b2cbc4a3a9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As far as I can tell this variable is now completely unneeded. It would
only ever get used in target builds and these are now correctly done
in the target environment namespace, not any of our cross environments.
As such, CC and other variables contain the correct compilers and other
tune options and these are correctly picked up when building libgcc,
libstdc++ and others.
I tried to figure out where else these would make any sense and couldn't
find anything. Builds appear fine without them so lets drop the complexity
including the patch adding in this flag to gcc.
(From OE-Core rev: 5484596f4252e707ff791feedf143a72dbb613f6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This command modifies ${S} and can race against other tasks running do_configure and
having the scripts disappear from under them. To avoid this move to its own
task and work on the shared work directory as a common task.
It needs to be a python task to avoid lots of shell exported variables as
dependencies.
(From OE-Core rev: 55ed9ffbab5118140baac5d0d29dcc919e1f1668)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the gcc builds are building copies of the target libraries
that we never use (it isn't installed in do_install). This is a rather
pointless waste of cpu time.
Instead just compile the host targets. Comparing the package output of
this compared to a previous build shows that the unwind.h header is
missing since its provided by gcc. Fix this simply by copying it in.
(From OE-Core rev: 19448a50c106684ee7e3862f759418c982363a29)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows them to co-exist together in the native sysroot, with one
set of cross tools per target architecture.
(From OE-Core rev: a2c5509520d5c3e082f55844e6545d0309565f8f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This has been replaced by the class-cross override.
(From OE-Core rev: 7d6050c57f195589c8429397432c78f68298b672)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* there is issue for TUNE_PKGARCH missing in PACKAGE_ARCHS for machines
without thumb enabled, it was reported by Jacob Kroon on IRC
(From OE-Core rev: 1e1b42f687b5cd34623fe2682218958e1947eb92)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a recipe does not explicitly set ARM_INSTRUCTION_SET, then there is no
need to throw a warning:
WARNING: Recipe 'foobar' selects ARM_INSTRUCTION_SET to be 'None',
but tune configuration overrides it to 'arm'
(From OE-Core rev: e457d71641af8802e47eb4854072e3cfb957b001)
Signed-off-by: Jacob Kroon <jacob.kroon@mikrodidakt.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add PACKAGECONFIG for two optional plugins (smb & sftp), both require
other packages from meta-openembedded
(From OE-Core rev: 64c44f02f1a320399e2f02aeaf83022bf83b69c8)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The check for the config variable is using the wrong define
resulting in the #else always being used.
(From OE-Core rev: 7e498c4c17e2c1b6928d4c1fd127977bb588991f)
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently it wasn't working because *COMMAND variables were removed
from fetcher.
Now checkpkg sets the command internally and sends it as a parameter
to _runwget() function from wget fetch.
(From OE-Core rev: b9a51fc1901c378375cca041da27ddbd450c0412)
Signed-off-by: Irina Patru <irina.patru@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update ltp version to 20140422
Removed two patches that already exist in the current version:
1. regen-makefile.patch
2. ffsb-remove-hardcoded-configure.patch
(From OE-Core rev: d72430772400c7733da2339f238ab4ea69e48a8e)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Log the output of the command as it runs not when it finished, else
tail -f tmp/work/minnow-poky-linux/core-image-sato/1.0-r0/testimage/ssh_target_log
isn't as useful as it could be.
(From OE-Core rev: be8f766f43d85c364b9706b464ed0a59d0fbf0b7)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it will be inherited by most DEFAULTTUNEs, except few exceptions which
support only thumb and not arm
* respect missing "arm" in TUNE_FEATURES in feature-arm-thumb.inc, so
when recipe asks for "arm" and MACHINE supports only "thumb" ignore
recipe and try to build with "thumb"
* show warning when overriding ARM_INSTRUCTION_SET set by recipe from tune
config
(From OE-Core rev: 1250d3e009363d20f15bbfaced622c5912a7fb93)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Install openssl test suite and run it as ptest.
(From OE-Core rev: c48981d2d24a20978a17866fa478dde21bd96b91)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cross packages are not packaged so we can drop all the packaging tasks
for some small performance improvements.
(From OE-Core rev: be07344397b383ab5e56048acb64eb56272fe95e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now Separated out libgcc-initial is there
(From OE-Core rev: 161bfc91e92a5080d3d4c27b3bebcd9c5dac01e1)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If image contains dbus and ptest is in DISTRO_FEATURES, dbus-ptest package
is installed, regardless of whether ptest-pkgs is in IMAGE_FEATURES. This
issue will increase size for most small images.
This patch fixes this problem.
[YOCTO #5702]
(From OE-Core rev: 0416583f014138656babdf78a574357ae5ff25bd)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is done to work around the issue of auto-mounting block devices
(i.e. SD cards) when root filesystem is still in read-only mode and
creating /media/<device> mount-points by udev is not possible. That
is due to udev (/etc/rcS.d/S03udev) getting started earlier than
checkroot (/etc/rcS.d/S10checkroot.sh) gets a chance to re-mount the
rootfs as read-write.
Although, canonical FHS specifies /media/<device> as a mount point
for removable media devices, the latest 2.3 version was released in
2004 and since then FreeDesktop/udisks and other tools adopted the
new /run/media/<user>/<device> location. That was done to overcome
read-only rootfs limitation, since /run is usually a tmpfs mounted
partition, plus avoid name-clash between users.
For our embedded systems environment we assume single-user operation
and hence simplify mount point to just /run/media/<device>. But for
proper per-user mounting to /run/media/<user>/<device>, some sort of
session management is required along with the tool like udisks, that
is out of scope of this simple udev-based auto-mounting.
(From OE-Core rev: acfe3014d41de5e87cdbc58d0396349c6b9c3ffd)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This device list is only used if USE_DEVFS is set to '0' (which is NOT the default since 2013-12-14,
see commit f54fdd6673a136ee1cee1f3263a8a7820de43ca3) and if IMAGE_DEVICE_TABLE and IMAGE_DEVICE_TABLES are not set.
This is, of course a very subjective list but minimal with 62 (special) files.
However, you should be able to boot correctly a lot of embedded linux around.
Changes:
- add sda, sdb, sda[1234], sdb[1234]
- add mmcblk0, mmcblk0p[1234]
- add rtc0, rtc1
- restrict maximum hdaX from 19 to 4 (pata is old)
- add ttyS1
- remove initctl, apm_bios, tty8, ttySA
- sorted entries
(From OE-Core rev: 72c011d272d0ffbd349858f16127058c74276866)
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
/usr/src/kernel/source deployed by kernel-dev package is symbolically
linking to a build-time kernel source folder, which make no sense when
cross-compiling.
Fixed by not populating it at install stage.
(From OE-Core rev: edb85a9589be54a1e9c980aa669a380222a76cf4)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds support for read-only rootfs to the bind service.
Basically it just bind mounts several directories so that the bind
service could start correctly without reporting any error.
(From OE-Core rev: 99cc96eaee28bfde89096689b1296d28937ead88)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patches for opkg have been rebased using git so that they apply cleanly onto
the new release.
(From OE-Core rev: 354e25fe51a8e85122898d1849008ace5dbe9461)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The base_contains is kept as a compatibility method and we ought to
not use it in OE-Core so we can remove it from base metadata in
future.
(From OE-Core rev: d83b16dbf0862be387f84228710cb165c6d2b03b)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BitBake has the exact same code as oe.utils.contains so there's no
reason to duplicate it. We now rely on the bb.utils.contains code for
metadata.
(From OE-Core rev: 93499ebc46547f5bf6dcecd5a786ead9f726de28)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Install openssh test-suite and run it as ptest.
(From OE-Core rev: 4d0ecccae671bffb40c870a6e33d20be869b89bc)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its useful to separate out the native (cross) binaries from the target
compilation. We already do this for libgcc, this now takes the same
approach for -initial.
(From OE-Core rev: 8a2aaf8b6bdca2d28c0047093c7f668750d57666)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than building the whole of libgcc to obtain the unwind.h header
file, simply configure it and then install the file. This avoids copying
chunks of data around when we don't need to and building the same thing
twice.
After doing this we need to make sure the target build directory exists
in the libgcc case since it will no longer be created automatically.
(From OE-Core rev: 459e4dc25462771038459567c22e87d4cd38b117)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Prepare the ground for the creation of libgcc-initial by splitting common
libgcc code into a libgcc-common.inc file.
(From OE-Core rev: 7c9f4a22d5c14d768be872beb9fc798163d6d204)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In a number of places it would be helpful to be able to copy trees of
files using hardlinks. This turns out to be harder than you'd expect
since there is no good single command that does this well and handles
all file types correctly.
Abstracting this into a function therefore makes sense, cpio seems
as good an option as any other.
(From OE-Core rev: 14ef03182e1e5fe7cf6b4112f29e6609631aa78d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
TARGET_LDFLAGS is currently defined in bitbake.conf to contain
${TARGET_LINK_HASH_STYLE} which differs between MIPS and other
targets. Since TARGET_LDFLAGS is an exported variable it affects the hash
of every shell task even if it is not used.
We don't want native recipe tasks to have different hashes purely because
they happen to have been built in order to satisfy dependencies for
different MACHINEs since this causes lots of churn in the native sysroot
when switching between MACHINEs.
Making native.bbclass override TARGET_LDFLAGS to use BUILD_LDFLAGS ensures
consistent hashes and is a sensible thing to be doing anyway.
Although they don't appear to have the same detrimental affect on task
hashes TARGET_CPPFLAGS, TARGET_CFLAGS and TARGET_CXXFLAGS should be
overridden too.
(From OE-Core rev: 05a70ac30b37cab0952f1b9df501993a9dec70da)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Depends on cryptodev-linux for providing a header file
(From OE-Core rev: b7587d2ef7642dcc248744ade8f85f815185e78c)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>