Changes to split live into iso and hddimg without
adding a new image type class.
This patch has only a visible effect on HOB and solves
part 2 of #3197
[YOCTO #3197]
(From OE-Core rev: f05ae5f57d9d1bd839fae0e3f353d4e0e303a183)
Signed-off-by: Valentin Popa <valentin.popa@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building against the sysroot, out of tree modules can require modpost
and other utilities normally found in the kernel's scripts directory. For
the kernel source in the staging dir, these scripts have been removed to
avoid mixing archiectures when packaging kernel-dev (among other things).
Rather than further complicate the kernel's install rule, or its packaging,
we can restore the scripts by building them in the kernel staging directory
after the sstate is installed, making them available to packages that need them.
(From OE-Core rev: 5bcd65807aa634060f98928db6011856934dabe4)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
--disable-install-makestrs was removed in 1.0.8, released back in 2010.
(From OE-Core rev: b972a047ede781b9e0570c55e803245e405e529b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
--without-x was removed in 1.32.0, so the correct option is now --without-xft.
Also remove --disable-glibtest, as configure.ac doesn't invoke that test.
(From OE-Core rev: e806f4ff404515f38318b6fed7d2b614c2138da6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These options appear to have never existed in libmatchbox, remove them.
(From OE-Core rev: e8853d58db75a1e1453f2d517fb533f086c2dab2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
--without-libjasper and --without-libtiff were removed when GTK+ and gdk-pixbuf
separated, in 2.22.0
(From OE-Core rev: d7aa6bf8d7702736e2bd81442ddef98869f40eae)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since when updating packages packages managers do not remove the previous package,
it just replaces new files and run pre/post install scripts. This causes not
to update update-rc scripts if they were changed.
This patch is useful in case the newer package version updated the update-rc
script.
(From OE-Core rev: d91b08f3a27baa49ae35dc20dba1b2d76e6abd64)
Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
--enable-threads and --enable-fake are obsolete, unrecognized options
for connman now.
(From OE-Core rev: f93ac05acafb9ebf4fa4f35e4f1b7780d3d8a5e9)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Xorg libraries that use Xmalloc need to know if malloc(0) returns NULL or not,
and as this is a runtime test it can't be checked for. Previously
xorg-lib-common declared that malloc(0) did return NULL, but this isn't true for
eglibc (only uclibc).
Instead, use libc-specific overrides to pass the relevant option.
(ideally the check would use the autoconf cache so this can be stored in the site files)
(From OE-Core rev: e628c8aba0189de30de2833882b9999ff3b6547a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add libswscale to PACKAGES_DYNAMIC because it was missing. Adding it also allows libswscale to get included in an image using IMAGE_INSTALL.
(From OE-Core rev: b57e7fa8b35cfcf9af6ca72d51bdf67e49254ac2)
Signed-off-by: Diego Rondini <diego.ml@zoho.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the part after "tty" in the device name go into label along with
everything after that part. For example if SERIAL_CONSOLES="115200;vt100;ttyS0"
than label=S0 but if SERIAL_CONSOLES="115200;ttyS0;vt100" than label=S0;vt100.
If SERIAL_CONSOLES="..;ttyX;..", part after 'X' should also be trimmed.
(From OE-Core rev: b00b9ae5693e04cacd0843c12a529e7f3dc501ed)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can't use htobe* and be*toh functions because they are not
available on older versions of glibc, For example, shipped on Centos 5.5.
Change to directly calling bswap_* as defined in byteswap.h.
(From OE-Core rev: 63edb6b9a8bdf2f5541edd618f2f598185e37223)
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* we correctly have
${STAGING_DIR_NATIVE}${base_sbindir_native}
and then double slash in
${STAGING_DIR_NATIVE}/${base_bindir_native}
* similar in PKG_CONFIG_DIR where libdir also starts with slash
${STAGING_DIR_HOST}/${libdir}/pkgconfig
* also fix double slash in insane.bbclass and staging.bbclass
* I was a bit nervous about staging change (in case the / was important
in some weird use-case, but the extra slash is there since following
commit where other extra slashes were removed only the one before
libdir was kept:
commit 6ea78d6489
Author: Richard Purdie <rpurdie@linux.intel.com>
Date: Mon Nov 2 17:10:51 2009 +0000
autotools.bbclass: Separate out useful staging functions into
base.bbclass and call from autotools classes
* this isn't fixing any real-world issue AFAIK, I was just trying to
debug one weird case where debugedit fails with
canonicalization unexpectedly shrank by one character
and it's easier to grep for '//' without many harmless instances
already in run* scripts etc
(From OE-Core rev: 0ddaf52e9e344986ae2b016cc068d9eee71b4347)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The group for /dev/hda should be disk instead of root.
The group ID for /dev/hda was 6, but it was modified to be root by
accident in the following commit.
commit c5ef0294a9b8d178896a47c9f5d6e3dd6797e343
device_table-minimal.txt: use user/group names instead of uid/gid
This patch changes it back.
(From OE-Core rev: 5c5db302400894c2bb1f4052d0f120738589c128)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is uncommon, but it is possible for upstream sources to contain files
that have wildcard characters in their names (Webmin is an example).
Because we were running glob.glob() on every entry in the list of
entries in FILES and then adding the result to the files list to be
processed, the process would loop infinitely if files whose names
contained wildcard characters were present. Fix this by avoiding
re-processing the output of glob.glob() with itself, and also "escape"
wildcard characters in FILES entries added automatically from
do_split_packages().
Fixes [YOCTO #1676].
(From OE-Core rev: 1aa3fbb547b0e21455f0dcc9b72ded08dc0efd67)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When user runs devshell in kernel recipe and compiles kernel,
this will fail by unrecognized option of LD.
----
$ make
...
arm-poky-linux-gnueabi-ld: unrecognized option '-Wl,-O1'
arm-poky-linux-gnueabi-ld: use the --help option for usage information
----
This set to empty LDFLAGS when user runs the devshell, and solve this problem.
(From OE-Core rev: e36ac3ab3a7fe02c7eeb3998ff33c001ab795841)
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When passing the wrong value for UBOOT_CONFIG it ought to raise an
error otherwise it is quite difficult for user to notice it didn't
behave as expected.
Reported-by: Lauren Post <lauren.post@freescale.com>
(From OE-Core rev: 5110dc988e3b8a1ce8b2309e4ddf17abb3f1cb0c)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta branch SRCREV to incorporate the two following
configuration changes:
452f067 lxc: Add lxc kernel config
a249eba x86_32: Enable X86_32 and disable 64BIT explicitly
(From OE-Core rev: 64d4c508652bc5d8a0b4c01f0d0813e58d6b39a6)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta branch SRCREV with the following commit:
[
The oe-core live class now fully support compressed ISO images this is
the corresponding kernel change.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
]
(From OE-Core rev: af2ef5085e92ca6291dabb134a7a3fb194a21d7a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta branch SRCREV with the following commit:
[
meta-haswell-wc: update bsp scc to use linux-yocto-3.8 standard/common-pc-64/base branch
Remove "branch haswell-wc" from haswell-wc-standard.scc
so that "haswell-wc" BSP uses standard/common-pc-64/base branch
on linux-yocto-3.8 repo.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
]
(From OE-Core rev: 978c77cae12f69e05ad97c6edd03d292098fff88)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the overrides are being applied backwards. This means something which is
platform specific is overriding something which is machine specific which
is clearly not intended.
This patch corrects the ordering to match the normal expected behaviour of
OVERRIDES.
Secondly, all overrides are being searched for each path in turn. What should
really happen is that we should look for the highest priority override (e.g. distro
or machine) in each layer, then move on to platform/tune (e.g. armv7a) and
then to arch (e.g. arm). This patch therefore also reverses the for loops
to achieve this behaviour and give the result the user would expect.
(From OE-Core rev: 92cbf7eeea553bfa24c7081473fa8bc4ebc1f552)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having a SRC_URI called ${PN} is asking for trouble. When extending FILESPATH,
alsa-state can be treated as a directory and copied over the contents of ${WORKDIR}
which is invariably not what the user wants.
Avoid this by renaming the SRC_URI to something else and only call
it alsa-state at install time.
(From OE-Core rev: 04c73333e4b539de96f096ca2954b2313175edc4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before checking if the image is a valid value, we need to check if the
list of items is big enough or we will raise an exception.
Reported-by: Lauren Post <lauren.post@freescale.com>
(From OE-Core rev: b833837cac377e7c1c3ff18531b152340b669329)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tar version 1.27 returns:
tar: --same-order option cannot be used with -c
with the commandlines we have been using. We can remove the -s option (which
is --same-order) to remove the error.
(From OE-Core rev: 69c26e795c117aabfaf313abbfd10e70ede633d9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tar version 1.27 returns:
tar: --same-order option cannot be used with -c
with the commandlines we have been using. We can remove the -s option (which
is --same-order) to remove the error.
(From OE-Core rev: 3d5a6d0a480a0fa98260a3b3ffc71b8d9e3e58af)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a fix missing from a previous commit:
http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=20a86e16bc54b74fbdb2a3a407d54210ea262925
since there was another section of toolchain-scripts needing updating.
This patch fixes the missing reference and unbreaks the ADT toolchain.
[YOCTO #5340]
(From OE-Core rev: e1b8b4859f00b40fb941a07a394ed35e06541663)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-sort as suggested by Peter Kjellerstedt
http://article.gmane.org/gmane.linux.embedded.poky/9253
This also standardizes spaces. The sort Peter suggests, however,
does not account for the header.
(From meta-yocto rev: dc3f562496769f9756f8ef1f1399f19e82146cb2)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit corrects a few duplicate distro aliases and adds some
packages missed for other arches as universe is slightly different
per machine.
(From meta-yocto rev: f179ce4473c0b597a8f9cfd80ff32f3118075342)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5214]
Applied some updates to better describe the variable's use
model.
(From yocto-docs rev: 9a66296f090f4ef023b3b5ae6f237676b6e9bd87)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Figure changed do to how they store images now. Figure needed
a new level in it.
(From yocto-docs rev: a7d9484cc1cbba37231e5238c92cb22099345ec9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a couple broken links. Also, noticed the yp-download figure
was out of date. Especially in the Figures folder of the mega-manual.
(From yocto-docs rev: 2e55faca221186d157dd5f77d048f1b2b90d5d91)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor read-through edits.
(From yocto-docs rev: 8a2df890390dc6d64f364c0f4c294cc0742e3f43)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes the prompt to be "#" rather than "$", which is a
convention for running commands at a different level according
to Trevor Woerner.
(From yocto-docs rev: b8eebdf4738c8655db724498a2293a44cae331dc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5303]
Added a bullet item to the files listed as part of images
in the buildhistory figure.
(From yocto-docs rev: 5c4c581cde509b880b0d36dad399df0cb510b2d2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5303]
Updated the figure to include a new folder named image-files.
Also changed the folder build-id to a file.
(From yocto-docs rev: eb6491858eabca3ce08ac1e4218b73e1ea7c893c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes modify the patch sent by Trevor that essentially
re-wrote this section. My edits were for consistency only and
style of the book. No technical information or flow was altered.
I did rename the section to be active to match the other package
related sections. This caused the link in the ref-manual in the
classes chapter to have to be updated.
(From yocto-docs rev: eb2f950786574b1e90adc673ef00f52a70db9be6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A cross-reference section to the section in the dev-manual on
runtime package management needed updating. The patch from Trevor
broke the link.
(From yocto-docs rev: ad33880f09569e886dcf3dbb7f4cc9058ddecba5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Valentin Popa
Bruce Ashfield
Ross Burton
Felipe F. Tonello
Jonathan Liu
Muhammad Shakeel
Cristiana Voicu
Diego Rondini
Ting Liu
Martin Jansa
Chen Qi
Paul Eggleton
Nobuhiro Iwamatsu
Otavio Salvador
Richard Purdie
Peter Kjellerstedt
Elizabeth Flanagan
Scott Rifenbark