Task name was incorrectly added to the targets that already
contained :task suffix and fired with BuildInit event. This
caused Toaster to create incorrect Target objects and show
them in UI.
[YOCTO #10221]
(Bitbake rev: b7faf1af3bd3110fba347fbe6e432fc4ee66590a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bitbake collects all events in special event queue when called with
-w option. However, it starts to write events to the eventlog only
after BuildStarted event is received. In some cases this event is
not received at all, e.g. when bitbake is run with --parse-only
command line option.
It makes sense to write all collected events when CookerExit event
received to make sure all events are written into the eventlog even
if BuildStarted event is not fired.
[YOCTO #10145]
(Bitbake rev: 57912de63fa83550c0ae658eb99b76e9cc91a8d1)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, there is a check to remove the TOSTOP attribute from
a tty to avoid hangs. It assumes that sys.stdout will have a
file descriptor and this is not always true, some IO classes
will throw exceptions when trying to get its file descriptor.
This will add a check for such cases and avoid throwing an
exception.
[YOCTO #10162]
(Bitbake rev: cb4f8f6efa28ef2b13bc738a0118b876baa15b3e)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds the notion of supporting multiple configurations within
a single build. To enable it, set a line in local.conf like:
BBMULTICONFIG = "configA configB configC"
This would tell bitbake that before it parses the base configuration,
it should load conf/configA.conf and so on for each different
configuration. These would contain lines like:
MACHINE = "A"
or other variables which can be set which can be built in the same
build directory (or change TMPDIR not to conflict).
One downside I've already discovered is that if we want to inherit this
file right at the start of parsing, the only place you can put the
configurations is in "cwd", since BBPATH isn't constructed until the
layers are parsed and therefore using it as a preconf file isn't
possible unless its located there.
Execution of these targets takes the form "bitbake
multiconfig:configA:core-image-minimal core-image-sato" so similar to
our virtclass approach for native/nativesdk/multilib using BBCLASSEXTEND.
Implementation wise, the implication is that instead of tasks being
uniquely referenced with "recipename/fn:task" it now needs to be
"configuration:recipename:task".
We already started using "virtual" filenames for recipes when we
implemented BBCLASSEXTEND and this patch adds a new prefix to
these, "multiconfig:<configname>:" and hence avoid changes to a large
part of the codebase thanks to this. databuilder has an internal array
of data stores and uses the right one depending on the supplied virtual
filename.
That trick allows us to use the existing parsing code including the
multithreading mostly unchanged as well as most of the cache code.
For recipecache, we end up with a dict of these accessed by
multiconfig (mc). taskdata and runqueue can only cope with one recipecache
so for taskdata, we pass in each recipecache and have it compute the result
and end up with an array of taskdatas. We can only have one runqueue so there
extensive changes there.
This initial implementation has some drawbacks:
a) There are no inter-multi-configuration dependencies as yet
b) There are no sstate optimisations. This means if the build uses the
same object twice in say two different TMPDIRs, it will either load from
an existing sstate cache at the start or build it twice. We can then in
due course look at ways in which it would only build it once and then
reuse it. This will likely need significant changes to the way sstate
currently works to make that possible.
(Bitbake rev: 5287991691578825c847bac2368e9b51c0ede3f0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than passing in a datastore to build on top of, use the data builder
object in the cache and base the parsed recipe from this. This turns
things into proper objects building from one another rather than messy
mixes of static and class functions.
This sets things up so we can support parsing and building multiple
configurations.
(Bitbake rev: fef18b445c0cb6b266cd939b9c78d7cbce38663f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather that the current mix of static and class methods, refactor
so that the cache has the databuilder object internally. This becomes
useful for the following patches for multi config support.
It effectively completes some of the object oriented work we've been
working towards in the bitbake core for a while.
(Bitbake rev: 7da062956bf40c1b9ac1aaee222a13f40bba9b19)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needing to access these static methods through a class doesn't
make sense. Move these to become module level standalone functions.
(Bitbake rev: 6d06e93c6a2204af6d2cf747a4610bd0eeb9f202)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In situations where a bitbake run fails before the build
properly starts and BuildStarted is fired, a UI has no way
to get at the targets passed to the build. This makes it
difficult for the UI to report on the targets which failed.
Fire a BuildInit event before running buildTargets() or
buildFile(). This enables a UI to capture targets passed to
buildTargets(), even if the build fails (e.g. the targets
themselves are invalid).
[YOCTO #8440]
(Bitbake rev: ac02fda870965bf7d44ff5688eda54d2d11ab9c7)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the runqueue cleanup/conversion, "dep" was mistakenly used where "tid" should
be leading to incorrect task-depends.dot files and causing general confusion.
Fix this, its clearly incorrect looking at the code.
(Bitbake rev: 689730dbb068c5ea3593e7b92fe5d5e5c0c3760a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Restructured EventWriter code to make it more readable:
- got rid of init_file method as it's called only once
- renamed exception variable e -> err
- renamed event variable e -> evt
- simplified main 'if' structure of send method
(Bitbake rev: 31977e7bb98f676197c6cee66f6ab4c12d4dcbde)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
class EventLogWriteHandler is a simple wrapper class with only one
class member. Replacing it with namedtuple makes code less nested and more
readable.
(Bitbake rev: 7c5b6812d32d173df36e7f9fc1d877329e79f994)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no need to remove output file as it gets rewritten by
open(self.eventfile, 'w') anyway.
(Bitbake rev: 1fc9957837b7038dfb983217a3fcd880f143e3a4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pickle converts python objects into the binary form that can't be
decoded to text and therefore can't be converted to JSON format.
Attempt to convert event objects raises this error:
TypeError:
b'\x80\x03cbb.runqueue\nrunQueueTaskSkipped\nq\x00)...
is not JSON serializable
Encoded pickled event objects to base64 to be able to convert data
structure to JSON.
[YOCTO #9803]
(Bitbake rev: f18055237e6084f90f6221442e3ba021dcc59c50)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
EventLogWriteHandler object was created and used in
BBCooker.initConfigurationData.
This causes creation of multiple EventLogWriteHandler objects
and results in duplicated entries in the output event file
as BBCooker.initConfigurationData is called multiple times.
Added eventlogfile parameter to EventLogWriteHandler to avoid using
global variable DEFAULT_EVENTFILE.
Moved EventLogWriteHandler to the module level.
Created EventLogWriteHandler object in BBCooker.__init__ to ensure that only
one handler object is created.
(Bitbake rev: d3ad8eee850ec2df54aa09fae44cc7e69c12f32a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
First parameter of traceback.format_exc is a 'limit' - a number
of stracktraces to format.
Passing exception object to format_exc is incorrect, but it works in
Python 2 as this code from traceback module works:
while tb is not None and (limit is None or n < limit):
Comparing integer counter n with the exception object in Python 2
always results in True. However, in Python 3 it throws exception:
TypeError: unorderable types: int() < <Exception type>()
As format_exc is used in except block of handling another
exception this can cause hard to find and debug bugs.
(Bitbake rev: a9509949d7e2adba6e3cd89f97daa19a955855b5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I'm not sure what possesed me when I wrote this code originally but its
indirection of everyting to use numeric IDs and position dependent lists
is horrific. Given the way python internals work, its completely and
utterly pointless from performance perspective. It also makes the code
hard to understand and debug since any numeric ID has to be translated
into something human readable.
The hard part is that the IDs are infectous and spread from taskdata
into runqueue and even partly into cooker for the dependency graph
processing. The only real way to deal with this is to convert everything
to use a more sane data structure.
This patch:
* Uses "<fn>:<taskname>" as the ID for tasks rather than a number
* Changes to dict() based structures rather than position dependent lists
* Drops the build name, runtime name and filename ID indexes
On the most part there shouldn't be user visible changes. Sadly we did
leak datastructures to the setscene verify function which has to be
rewritten. To handle this, the variable name used to specifiy the version
changes from BB_SETSCENE_VERIFY_FUNCTION to BB_SETSCENE_VERIFY_FUNCTION2
allowing multiple versions of bitbake to work with suitably written
metadata. Anyone with custom schedulers may also need to change them.
I believe the benefits in code readability and easier debugging far
outweigh those issues though. It also means we have a saner codebase
to add multiconfig support on top of.
During development, I did have some of the original code coexisting with
the new data stores to allow comparision of the data and check it was
working correcty, particuarly for taskdata. I have also compared
task-depends.dot files before and after the change. There should be no
functionality changes in this patch, its purely a data structure change
and that is visible in the patch.
(Bitbake rev: 2c88afb60da54e58f555411a7bd7b006b0c29306)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
DeprecationWarning: The 'warn' method is deprecated, use 'warning' instead
(Bitbake rev: a3f464d202dafef4538e66c008cdecb7b8709ed1)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Various misc changes to convert bitbake to python3 which don't warrant
separation into separate commits.
(Bitbake rev: d0f904d407f57998419bd9c305ce53e5eaa36b24)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Under python the type conversions can mean there are float values
used for triggering the parse progress events which then fails.
Add an explict int() conversion to ensure the parse events are
generated under python3.
(Bitbake rev: 138329c58e92744c56aae3ab70ceeef09613250c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use open() instead of file() and close files when finished with them.
(Bitbake rev: 033c5a16ff19781ed793c2d97d285884017a2a4e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's useful to see tracebacks for ExpansionErrors, but only if we skip the
leading bitbake-internal elements, otherwise we see elements of the expansion
process.
As one example:
Before:
ERROR: ExpansionError during parsing /scratch/yocto-new/external-as-needed/poky/meta/recipes-core/glibc/glibc-locale_2.23.bb: Failure expanding variable PV[:=], expression was ${@get_external_libc_version(d)} which triggered exception AttributeError: 'module' object has no attribute 'external'
After:
ERROR: ExpansionError during parsing /scratch/yocto-new/external-as-needed/poky/meta/recipes-core/glibc/glibc-locale_2.23.bb
Traceback (most recent call last):
File "PV[:=]", line 1, in <module>
File "/scratch/yocto-new/external-as-needed/meta-sourcery/recipes-external/glibc/glibc-external-version.inc", line 3, in get_external_libc_version(d=<bb.data_smart.DataSmart
object at 0x7f05d2566950>):
sopattern = os.path.join(d.getVar('base_libdir', True), 'libc-*.so')
> found_paths = oe.external.find_sysroot_files([sopattern], d)
if found_paths:
ExpansionError: Failure expanding variable PV[:=], expression was ${@get_external_libc_version(d)} which triggered exception AttributeError: 'module' object has no attribute 'external'
(Bitbake rev: 7ff5b9eed82b7f4fd138fc6d746a0b79efbea98a)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now the event is sent unconditionally we can drop this feature
as its no longer needed.
(Bitbake rev: 473deeb0fc6065693e1fcfcbb8b79753103db537)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure we pass the string parameter correctly.
(Bitbake rev: 7ed82bd1fe7bdd93b0614119c42eb218dc5d83e6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids a common issue where PACKAGECONFIG is emitted as a function in
bitbake -e when the 'python' flag exists. It isn't a python function unless
both 'func' and 'python' are set. This aligns with the behavior of
emit_func_python.
(Bitbake rev: c5e45063cb3ae17bbe3304ea5e712bd76e686c4a)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We now prefix log messages coming from worker task context with the
PF and task info, however parsing messages all have to be manually
prefixed which is ugly and error prone. This change modifies the log
handler filter so this happens automatically, meaning we don't have
to change every message to include that information. This makes error
messages longer but more usable.
(Bitbake rev: 1af0ccaac81e182c4ca520037dda362d180e5605)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
An invalid task causes bitbake to exit incorrectly, firing a
CommandCompleted event rather than a CommandFailed one. This
means that clients listening for CommandFailed events are
unable to detect the build failure even though one occurred.
Passing an exception string to finishAsyncCommand when a task
fails causes the CommandFailed event to be fired correctly.
[YOCTO #9087]
(Bitbake rev: 98a2c37e077b16e3bc8bb102bd18b293130d15a4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Prevent a hang when shutdown() is called during parsing (e.g. after
SIGINT). We must not append 'None' to the jobs queue. Otherwise the
worker loop inside Parser.realrun() may break out at the wrong point,
causing the results queue thread blocking bitbake indefinitely.
[YOCTO #9319]
(Bitbake rev: 7ebea3e9a60232222efa8a546a0ff28a53029949)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently bbappend files in a layer are applied in the order they're
found on disk (as reported by glob) which means things are not
deterministic.
By sorting the glob results, the order becomes deterministic, the parsing
order for .bb files also should be deterministic as a result of this change.
[YOCTO #9138]
(Bitbake rev: 3f8febc4212fbd3485ac9bdd4ac71b8fb0a05693)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop unused 'd' argument from the cache save methods, simplifying the
API.
(Bitbake rev: 81bc1f20662c39ee8db1da45b1e8c7eb64abacf3)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We're seeing issues where the self test, which uses tinfoil doesn't
notice the changed contents of include files. The issue is
cached_statements in the parser being reused when the files have changed.
Whilst looking at this, I realised there were some other issues:
* We need to also invalidate the mtime cache when cooker restarts
* We should pass full filenames to the file invalidation code
* We should process cached_statements as part of inotify invalidation
With these fixes, the caching is more reliable for memory resident
bitbake too. It does raise some questions about cache validation and
lifecycles and indicates bitbake does need more work in the area,
preferably with the removal of the globals. This at least highlights
and works around some of the current issues.
(Bitbake rev: 3f507ff8bc467fba936cf3f31bb8ea8e02f168e8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
CookerParser.shutdown code doesn't do all required work to shutdown
parser processes. As a result bitbake hangs if interrupted during
parsing. Putting None into the parser_quit queue should fix this issue
as it makes parsers to quit main loop.
(Bitbake rev: f67307977e8f089ce6d208d3e9de2a6a1768757e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Right now, if you have some python code like:
X = "a"
def somefunction(d):
d.setVar("X", "b")
d.setVar("Y", "${X}")
then any sane person would expect that Y = "b" at the end of the
function. This is not the case, Y = "a".
This is due to the python function being expanded before execution, the
executed code would read d.setVar("Y", "a"). This understandably
confuses people, it also makes it near impossible to write ${} in a
python function without unintended things happening.
I think there is general agreement we should fix this and standardise
on non-expansion of python functions. We already don't expand anonymous
python (mostly).
I've checked OE-Core with buildhistory before and after this change and
there were a small number of issues this exposed which I've sent
patches for.
I propose we default to not expanding python code and then deal with
any consequences from that if/as/where identified. This will improve
new user understanding and usability of the system, it also allows
several long standing weird expansion issues to be fixed.
(Bitbake rev: 8bf33a8e92c0e188fa392030025756196c96fcbb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't want to expand python functions since they aren't expanded
at execution time (e.g. anonymous python). They can also have side
effects.
This function is primarily used by toaster for variable dumps for later
display. The lack of expansion of python functions won't matter in this case
and actively helps some variable handling (e.g. SRCPV).
(Bitbake rev: 3f5520b4844a4bdd615046479ba08ed192bdc8cd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Extended the dot styling of dependencies created by bitbake -g in dot syntax to differentiate between the various kinds.
depends: solid
rdepends: dashed
rrecommends: dotted
The change observed is that depends get an explicit style which is the same as dot default behavior and the runtime recommends get
dotted while before they were dashed. This helps to distinguish them graphically as well as eases post processing by script.
(Bitbake rev: 86e78e0ca7aa5452411f35239942ecee3d8824ec)
Signed-off-by: Henning Schroeder <henning.schroeder@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently any not catched exception in cooker causes bitbake
to hang because of not terminated children of CookerParser.
Long term solution would be to reimplement Cooker as a context
manager and terminate parser children in its __exit__ method.
Partial fix is to call CookerParser.shutdown in Cooker.shutdown in
hope that all Cooker exceptions are caught and shutdown method is
called.
[YOCTO #8900]
(Bitbake rev: 3f67600dc3292bc8208644ce89e8bf7ab95cf2e7)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I before E, except after C...
(Bitbake rev: 14c9593265f7469cb8a205a46f845ac7491246df)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we're only going to parse one recipe, no point in starting
a large number of threads.
(Bitbake rev: b977faf59dc08050a44a16032fe52d1bbb80f2a1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This means that when you view the process tree, the processes
have meaningful names, aiding debugging:
$ pstree -p 30021
bash(30021)───KnottyUI(115579)───Cooker(115590)─┬─PRServ(115592)───{PRServ Handler}(115593)
├─Worker(115630)───bash:sleep(115631)───run.do_sleep.11(115633)───sleep(115634)
└─{ProcessEQueue}(115591)
$ pstree -p 30021
bash(30021)───KnottyUI(117319)───Cooker(117330)─┬─Cooker(117335)
├─PRServ(117332)───{PRServ Handler}(117333)
├─Parser-1:2(117336)
└─{ProcessEQueue}(117331)
Applies to parse threads, PR Server, cooker, the workers and execution
threads, working within the 16 character limit as best we can.
Needed to tweak the bitbake-worker magic values to tell the
workers apart.
(Bitbake rev: 539726a3b2202249a3f148d99e08909cb61902a5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before, BBMASK was only permitted to contain one regular expression.
This made it hard to add to the BBMASK in multiple places as one was
supposed to separate the different regular expressions with a "|"
rather than with whitespace as is customary in BitBake variables.
Now one can specify any number of regular expressions in BBMASK. This
makes it possible to, e.g., mask out recipes in another layer from the
layer.conf file.
This also properly ignores any regular expressions that do not compile
(before an invalid regular expression would cause a ParseError in the
first bbappend file found stating that it was not a BitBake file...)
(Bitbake rev: 2c778ad50aceaffb855baf5f4aa0fed98c880870)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In certain circumstances it can be useful to get access to the world
targets list from a recipe in order to add dependencies on some or all
of the items in it. If a special function, 'calculate_extra_depends' is
defined in the recipe, and the recipe is to be built, then call it at
the right point before we calculate which tasks should be run. The
function can append items to the "deps" list in order to add
dependencies. This is not as tidy a solution as I would have liked, but
it does at least do the job.
As part of this change, the buildWorldTargets function was moved to
bb.providers to make it possible to call from taskdata.
Part of the implementation of [YOCTO #8600].
(Bitbake rev: aba0dce57c889495ec5c13919991a060aeff65d2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added providermap information to the result of buildDependTree API.
This will be used by Toaster to map virtual dependencies to recipes.
(Bitbake rev: d3e07368549f30265f59846a260efa8230a225ca)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The documentation for findFilesMatchingInDir() was inconsistant with the
implementation: the regex was escaped before searching so effectively it's a
pure textual substring, and the machine example was broken.
(Bitbake rev: 6bef981488ec94b46dbe3797acfecf9c4b6ecbbc)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No point counting all instances when we just want to know if there's any or not.
(Bitbake rev: 3369072efb653339da8dbd1ca864ff8e1ff899ca)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added method to convert state code into the human readable name.
It will be used in logging and error reporting.
(Bitbake rev: 9ec6379b27d210214d0b3f2e55962f721b7f5f51)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The SyntaxError exception simply shows the recipe that failed to parse
which is pretty useless without the actual exception. We could make it
print more info, however we can just use one of the more generic handlers
instead and remove this one.
For a python indentation error, this leads to a much more readable error
message.
(Bitbake rev: 9241eb10847634e34c5ff8767ed8c114f66ff6cf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The console log data is written to is created at console initialisation
time and does not change over reset events. This ensures the
BB_CONSOLELOG value is correct over such resets by preserving it.
(Bitbake rev: 335eb2db228f7543a49de71f063ac72b865c947a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Additional config files passed to bitbake server with --read and
--postread options are rewritten by client bitbake even if
it doesn't use those options.
This is a show stopper for toaster as toaster command line
builds are based on the assumption that server is aware of
toster configs, provided by --postread option.
This behaviour is fixed by preserving values of --read and
--postread options when bitbake server starts and restoring
them if client bitbake doesn't explicitly specify them.
(Bitbake rev: 02c64f7487ca8ec5d32c440f5002c4b8f64b76a6)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BuildStarted event not fully represents build tasks for
the targets. If -c option is used to specify default task
it's not included into the event.
Made build targets to always look as <target>:do_<task>.
Consider default task (do_build or specified by -c command
line option) when normalizing.
(Bitbake rev: 0b0e214e6f53c97ad3d48f622c7fc0ca149956f6)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The output of "bitbake, -c listtasks pkg" lists tasks with their real names
(starting with "do_"), but then "bitbake -c do_task" fails, as "do_" always
gets unconditionally prepended to task names. This patch handles this error
by checking whether a task starts with "do_" prior to prepending it with it
when the task runlist is being constructed (and a few other corner cases).
[YOCTO #7818]
(Bitbake rev: dd3050ceef37ac556546e940aa596ce96ef6c8df)
Signed-off-by: Alex Franco <alejandro.franco@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh
Mariano Lopez
Richard Purdie
Elliot Smith
Ed Bartosh
Robert Yang
Christopher Larson
Markus Lehtonen
Schroeder, Henning
Phil Blundell
Peter Kjellerstedt
Paul Eggleton
Ross Burton
Alex Franco