Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
However in u-boot no FILESPATH additions are currently needed so
instead it should be removed.
(From OE-Core rev: f8675ffa3f90d4e411a82d33ac8319f2c4c19235)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
x-load has been superseded by u-boot SPL for all cortex based TI SoCs.
For legacy boards meta-ti layer (that contains a maintained recipe)
should be used instead.
(From OE-Core rev: 3a675df3dd608b6e7250a3b0bfc9362d2f4e8aa9)
Signed-off-by: Petter Mabacker <petter@technux.se>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows us to remove the following uses of PRINC in meta-raspberrypi:
recipes-bsp/formfactor/formfactor_0.0.bbappend:
PRINC = "1"
recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend:
PRINC := "${@int(PRINC) + 5}"
(From OE-Core rev: cffbd11d915fe8a1399f23c97c4e2ecbdae4d00a)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The class itself currently does nothing. The idea is to mark all recipes that
make use of the texinfo utilities. In the future, this class could be used to
suppress the generation/formatting of documentation for performance,
explicitly track dependencies on these utilities, and eliminate Yocto's
current dependency on the host system's texinfo utilities.
(From OE-Core rev: e6fb2f9afe2ba6b676c46d1eb297ca9cc532d405)
Signed-off-by: Max Eliaser <max.eliaser@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The base_contains is kept as a compatibility method and we ought to
not use it in OE-Core so we can remove it from base metadata in
future.
(From OE-Core rev: d83b16dbf0862be387f84228710cb165c6d2b03b)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Resolves warnings of this kind in the OpenPLi layer:
WARNING: Use of PRINC * was detected in the recipe *
(From OE-Core rev: 5ffb38d6ace7faae839c8cac7327b5b1c2daae1a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous behavior defines a static set of modules that are built
into the grub efi executable. This works fine for a limited set of boot
environments namely the standard linux/initrd. This patch conditionally
assigns the same modules to a variable. This allows other meta layers
to add additional modules or completely override the defaults. The use
case driving this patch is the use of multiboot2 and related modules.
(From OE-Core rev: 597f8e0040ba3135220000b23767858c64b5c9b8)
Signed-off-by: Philip Tricca <flihp@twobit.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Debugedit errors out on bare metal binaries. The first version of this patch limited it to 64 bit targets, but the problem now shows up on 32 bit targets (minnowboard) as well.
(From OE-Core rev: f95c7611007ddda3fe36db90168c7d5de096f9cd)
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix beaglebone boot issue with large kernel images overwriting Device Tree.
See very detailed comments inside the patch.
The original patch is being reviewed upstream and is targeting mainline U-boot
version 2014.07. This is the adaptation of the patch for 2013.07 version we use
(From OE-Core rev: cd495307d233b81ebeb43198d13bbd4b3ad7407f)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the warning:
WARNING: QA Issue: gummiboot: Files/directories were installed but not shipped
/usr/lib
/usr/lib/gummiboot
/usr/lib/gummiboot/gummibootx64.efi
This is because it uses "/usr/lib" in gummibootlibdir, use ${libdir} to
fix it.
(From OE-Core rev: ee587332f2ac9d88d4a300732645b0e2f793ce5f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gummiboot depends on gnu-efi which had set:
COMPATIBLE_HOST = "(x86_64.*|i.86.*)-linux"
We also need set this for gummiboot, otherwise there would be build
failures for other non-x86 archs.
(From OE-Core rev: f1b23a32d0c823577cec532e3646c2f78e81ccda)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its LIBDIR in Makefile is:
LIBDIR = $(PREFIX)/lib
This is incorrect for 64 bit bsp, thus will cause build failures on gummiboot:
ld: cannot open linker script file /path/to/usr/lib64/elf_x86_64_efi.lds: No such file or directory
[YOCTO #6053]
(From OE-Core rev: a18e4bef5f284c5b940007e60c7be28128a94c44)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gummiboot is a simple UEFI boot manager.
Recipe imported from meta-intel with these changes:
- drop PR and update configure options
- upgraded to latest version
A couple of notes:
- If you wish you can install the gummiboot package on the target and
use 'gummiboot install' to add the payload to the ESP (see gummiboot --help,
just make sure the ESP partition has the boot flag on as gummiboot won't accept it
otherwise). However the point of this recipe is to be used by bootimg.bbclass and
generate images with gummiboot instead of grub-efi.
- You need a kernel which has CONFIG_EFI_STUB=y at least
- The default linux-yocto kernel config does not enable that, easiest way
to enable is to build with KERNEL_FEATURES_append = " cfg/efi-ext" in local.conf
(From OE-Core rev: 8f95d0598c31fff76e2a58fecb6c96197121a044)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gnu-efi is required by gummiboot.
Imported from meta-intel, PR dropped, no new version available.
(From OE-Core rev: fdb65c569db2b55023f9d1d72959e4e7d187a1d8)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Our kernel's name is bzImage, we need add it to grub.d/10_linux.in so
that the grub-mkconfig and grub-install can work correctly on the
target.
(From OE-Core rev: 1dd9a16030bc2dc673c7b121dea6e78f2681f55e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Our kernel's name is bzImage, we need add it to grub.d/10_linux.in so
that the grub-mkconfig and grub-install can work correctly on the
target.
(From OE-Core rev: 6677bb09ae64e878b12552caef999b60bc99d0e4)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Our kernel's name is bzImage, we need add it to grub.d/10_linux.in so
that the grub-mkconfig and grub-install can work correctly on the
target.
(From OE-Core rev: c972e122066aa80550155feea619908f6d3c3176)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Despite the fact that it's currently specific to the Sharp Zaurus, we
kept this in OE-Core up to now as a potential basis for better handling
of device-specific customisations for a wider range of devices. Whilst
moving device-specific customisations to a more central point is still
a laudable goal, these days such functionality probably wouldn't be
implemented on top of zaurusd or even in the same way as zaurusd, and
thus it makes sense to leave its recipe to be maintained in the
meta-handheld layer (where a current recipe already exists.)
(From OE-Core rev: 3255b9de49c8b4d74cce3a2a0e750d3d3e698b59)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Those recipes need PR bump so we drop PRINC from meta-fsl-arm layer.
(From OE-Core rev: b60c68a4ea937a647e13d69dfecefb7dcbda95a0)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* resolves following warnings:
WARNING: Use of PRINC 17 was detected in the recipe meta-openembedded/meta-systemd/recipes-core/systemd/systemd-machine-units_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-gpe/recipes-support/fbreader/fbreader_0.12.10.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-gpe/recipes-support/fbreader/fbreader_git.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-multimedia/recipes-multimedia/sox/sox_14.4.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-oe/recipes-multimedia/mplayer/mplayer-common.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-smartphone/meta-android/recipes-bsp/chroot-script/chroot-script_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-connectivity/avahi/avahi-ui_0.6.31.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-connectivity/bind/bind_9.8.1.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-core/systemd/systemd-serialgetty.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-core/sysvinit/sysvinit-inittab_2.88dsf.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/screen/screen_4.0.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/shadow/shadow-securetty_4.1.4.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/shadow/shadow_4.1.4.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-graphics/libsdl/libsdl_1.2.15.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-graphics/packagegroups/packagegroup-core-x11-xserver.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-kernel/modutils-initscripts/modutils-initscripts.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-multimedia/libsndfile/libsndfile1_1.0.25.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-support/libcap/libcap_2.22.bb (or one of its .bbappends)
WARNING: Use of PRINC 11 was detected in the recipe openembedded-core/meta/recipes-bsp/keymaps/keymaps_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 11 was detected in the recipe openembedded-core/meta/recipes-core/systemd/systemd-compat-units.bb (or one of its .bbappends)
WARNING: Use of PRINC 12 was detected in the recipe openembedded-core/meta/recipes-core/initscripts/initscripts_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 13 was detected in the recipe openembedded-core/meta/recipes-core/base-files/base-files_3.0.14.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe meta-openembedded/meta-oe/recipes-navigation/navit/navit_svn.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe meta-openembedded/meta-oe/recipes-support/lvm2/lvm2_2.02.97.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-connectivity/portmap/portmap_6.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-extended/pam/libpam_1.1.6.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-graphics/packagegroups/packagegroup-core-x11.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe meta-openembedded/meta-efl/recipes-efl/efl/entrance_svn.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe meta-openembedded/meta-oe/recipes-multimedia/mplayer/mplayer2_git.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-bsp/formfactor/formfactor_0.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-connectivity/avahi/avahi_0.6.31.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-connectivity/dhcp/dhcp_4.2.5-P1.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-core/init-ifupdown/init-ifupdown_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 5 was detected in the recipe meta-openembedded/meta-oe/recipes-core/meta/distro-feed-configs.bb (or one of its .bbappends)
WARNING: Use of PRINC 5 was detected in the recipe openembedded-core/meta/recipes-connectivity/bluez/bluez4_4.101.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-core/packagegroups/packagegroup-base.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-core/packagegroups/packagegroup-core-boot.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bb (or one of its .bbappends)
WARNING: Use of PRINC 7 was detected in the recipe meta-openembedded/meta-oe/recipes-navigation/gpsd/gpsd_3.7.bb (or one of its .bbappends)
WARNING: Use of PRINC 7 was detected in the recipe openembedded-core/meta/recipes-core/udev/udev-extraconf_1.0.bb (or one of its .bbappends)
(From OE-Core rev: c6825ec6e92e20bb64a051d1576f363c16e98d68)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch goes through the OE-Core recipes and marks those which use autotools
but don't support a separate build directory (${S} != ${B}). A new class,
autotools-brokensep is used for this purpose.
This doesn't introduce any change in behaviour in its own right.
(From OE-Core rev: 006b8a7808a58713af16c326dc37d07765334b12)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Exclude the .pc from po/POTFILES.in since quilt uses "patch --backup",
which will create the backup file under .pc, this may cause unexpected
errors, for example, on CentOS 5.x, if the backup file is null
(newfile), it's mode will be 000, then we will get errors when xgettext
try to read it.
(From OE-Core rev: fe037904ce8a90f428645c19587913c7b90652ef)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Completes previous commit b5292d4115a4555a66b5e35acdc67dd71fb8577f.
Updates SUMMARY[doc] (meta/conf/documentation.conf).
Changes:
- rename DESCRIPTION with length < 80 to (non present tag) SUMMARY
- drop final point character at the end of SUMMARY string
- remove trailing whitespace of SUMMARY line
Note: don't bump PR
(From OE-Core rev: ad17dfd31a2b97b3e610a0ea0889f5ecb2a63b97)
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Prefix to EnvironmentFile should be preciding the filenamn.
(From OE-Core rev: 1f694e4cb493b0737b6009382c0957e6837ebbed)
Signed-off-by: Tobias Blom <tobias.blom@techne-dev.se>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of manually adding initscripts to RDEPENDS of each package,
we should make it automatically handled by the update-rc.d.bbclass.
This solution would have the benefit of backward compatibility. In
other words, users need not modify their recipes.
This reverts commit 16080a3485.
(From OE-Core rev: f9f193219bd510160b6b09bae652a9dc8ea01e7b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
grub-2.00-disable-help2man patches configure.ac to disable the help2man check
because we don't need the man pages. It also then patches configure itself so
that autogen.sh doesn't have to be called for performance reasons. However,
do_configure causes a full autoreconf so this optimisation is moot, and can
cause patch failures when an existing build tree is re-used.
Instead, simply use CACHED_CONFIGUREVARS to tell configure that it can't find
help2man.
(From OE-Core rev: 34b9b2931da1fbf4c68a3e35f4ca56553058574b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop the 2 patches since the functionality is upstream now.
Also sync PACKAGECONFIG with grub 2.00 recipe.
The debugedit problem for 64 bit machines in do_package is still present, though:
ERROR: debugedit failed with exit code 256 (cmd was '/build/linaro/build/build/tmp-eglibc/sysroots/x86_64-linux/usr/lib/rpm/bin/debugedit' -b '/build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux' -d '/usr/src/debug' -i -l '/build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux/grub/2.00+AUTOINC+0776112c53-r0/debugsources.list' '/build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux/grub/2.00+AUTOINC+0776112c53-r0/package/usr/lib/grub/arm64-efi/cpio_be.module'):
/build/linaro/build/build/tmp-eglibc/sysroots/x86_64-linux/usr/lib/rpm/bin/debugedit: /build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux/grub/2.00+AUTOINC+0776112c53-r0/package/usr/lib/grub/arm64-efi/cpio_be.module: Unhandled relocation 258 in .debug_info section
ERROR: Function failed: split_and_strip_files
ERROR: Logfile of failure stored in: /build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux/grub/2.00+AUTOINC+0776112c53-r0/temp/log.do_package.29234
ERROR: Task 10 (/build/linaro/build/openembedded-core/meta/recipes-bsp/grub/grub_git.bb, do_package) failed with exit code '1'
(From OE-Core rev: cd29ff3927a6deae5e808525bd56acf7b4b0b60c)
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoids it's auto-detected from sysroot, which will lead implicit results.
(From OE-Core rev: 6f9e72f77cd0b06c5ad753cb9ab05dd681690c6b)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recently grub git gained support for ARM builds (using u-boot or EFI as first stage loader) and with 2 extra patches we get support for 64-bit ARM as well.
Buildtested for genericarmv7a, genericarmv8 and qemux86. The genericarmv8 build fails in do_package/strip due to a binutils problem.
(From OE-Core rev: b4e28912af0618755ce75d0cc27d53fa9d745b30)
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that the initscripts-functions has been packaged separately,
packages which may use the functions script should have a runtime
dependency on it.
(From OE-Core rev: 6690c12cb1977f6bf93f3eb6d471dbd7db81bf28)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Move package-specific defitions to the end
* Define pciutils-ids package as ${PN}-ids
* Add SUMMARY and tweak DESCRIPTION for pciutils-ids package
(From OE-Core rev: c8c39c78878cdffe47b376b6211dd1ae45fd59d2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix statement indenting and spacing issues that I happened to notice.
(From OE-Core rev: d11e297b007aba625b398c52952ec929c3b02b83)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A lot of our recipes had short one-line DESCRIPTION values and no
SUMMARY value set. In this case it's much better to just set SUMMARY
since DESCRIPTION is defaulted from SUMMARY anyway and then the SUMMARY
is at least useful. I also took the opportunity to fix up a lot of the
new SUMMARY values, making them concisely explain the function of the
recipe / package where possible.
(From OE-Core rev: b8feee3cf21f70ba4ec3b822d2f596d4fc02a292)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
liblzma5 is really requiring by grub, setting RDEPENDS to xz would pull
unneeded xz binaries into rootfs.
(From OE-Core rev: 78526905999fa38047ae8f3491127cc03de3e3f6)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-mcmodel=large is not supported by gcc with version lower
than 4.4, but we don't need to use memory over 4GiB, so add
a patch to allow compilation without large model support.
(From OE-Core rev: 1d005240bcbcca97126bddb1f6d4882ba4d81fa9)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To generate the target EFI image in a native package, it requires
the host gcc have the ability to do -m32/-m64 compiling, but gcc
doesn't have that support on the 32bit version of some distributions
(e.g. rehl, suse), it would fail when build a 64bit target on these
32bit hosts.
In fact, all we need from grub-efi-native is the grub-mkimage binary,
so change the solution to:
* grub-efi-native only install grub-mkimage
* grub-efi compiles target modules, generates EFI image
with grub-mkimage and deploy, but install nothing.
(From OE-Core rev: 53d3f1273983dfce2a907b39768978afe99aab1a)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
acpid.c in acpid before 2.0.9 does not properly handle a situation in which
a process has connected to acpid.socket but is not reading any data, which
allows local users to cause a denial of service (daemon hang) via a crafted
application that performs a connect system call but no read system calls.
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2011-1159
(From OE-Core rev: e7b2b84dece29d16b8f05daf962b69e78dd64cb3)
Signed-off-by: Yue Tao <yue.tao@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
grub requires bison and it will fail to configure on
the host without bison installed, add the dependency
to fix it.
(From OE-Core rev: a1510c1a8e6b8a652ae65b7e3910501f1055f87f)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Set SUMMARY instead of DESCRIPTION
* Move packaging variables to the end
* Fix spacing in LICENSE assignment
* Fix indenting
(From OE-Core rev: 92f10f733a93f1772636603c0e910daf3eb9ff42)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: c8d687f409a19312b34e215e7caaa39199598ed0)
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: a3f3f44f9a064a0158ce9ad12af7a7cb26042c97)
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
when execute the command "/etc/init.d/acpid stop" and "/etc/init.d/acpid
restart", it prompt "no /usr/sbin/acpid found;none killed",The acpid could
not be restarted because the script start with "!/bin/sh –e", that will
make the script stop when an error occurred. So when no 'acpid' running
(we have stopped it), the script would exit and 'restart' operation would
be stopped by ‘stop’ operation.so avoiding the error occurred, add "-o"
option,exit status 0 (not 1)if nothing done.
(From OE-Core rev: b7a8daf52c9befc773f320e54999bb91efdac334)
Signed-off-by: Baogen Shang <baogen.shang@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
when booting board,the acpid daemon display some error information.
the information as follow:
acpid: opendir(/etc/acpi/events): No such file or directory
the path "/etc/acpi/events" does not exist,so building the directory
to fix the bug.
(From OE-Core rev: 8c0cc8815919c23033a4bb937331c2650c8aee4e)
Signed-off-by: Baogen Shang <baogen.shang@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
grub_2.0.0 requires xz to run or an error may occur.
(From OE-Core rev: ffa2877c06c587d4ea56c55bfd0f67a88e42a772)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove all PR = "r0" from all .bb files in oe-core. This was done
with the command sed -e '/^PR.*=.*r0\"/d' recipes*/*/*.bb -i
We've switching to the PR server, PR bumps are no longer needed and
this saves people either accidentally bumping them or forgetting to
remove the lines (r0 is the default anyway).
(From OE-Core rev: 58ae94f1b06d0e6234413dbf9869bde85f154c85)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is originally from oe-classic, it seemed to
have been dropped in the transition for some reason.
However I needed this patch to boot a system with 256 byte
inodes.
(From OE-Core rev: f36fd55e8721559dee2e9b57930cd3962958ba9e)
Signed-off-by: Jack Mitchell <jmitchell@cbnl.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having a SRC_URI called ${PN} is asking for trouble. When extending FILESPATH,
alsa-state can be treated as a directory and copied over the contents of ${WORKDIR}
which is invariably not what the user wants.
Avoid this by renaming the SRC_URI to something else and only call
it alsa-state at install time.
(From OE-Core rev: 04c73333e4b539de96f096ca2954b2313175edc4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The iso9660 file system support needs to be added to grub in order to
be able to correctly find the grub.cfg. The grub commands to locate
the grub.cfg also needs to be encoded into grub's default
configuration.
This change allows the resulting grub binary to work both in the hard
drive / USB boot case or the optical media boot case.
[YOCTO #4100]
(From OE-Core rev: 0bc0762a479b5182a07fccb2b1e9cd5fc15ca485)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If do_patch re-executes, patching the configure script will fail because
it will have been regenerated during do_configure. We're patching
configure.ac so we don't need to patch configure anyway.
(From OE-Core rev: ae98a95577ba9c8a6a0d9a78d4cea33a92adff35)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The U-Boot configuration has been consolidates into a single class to
avoid code duplication. This is now done by uboot-config class, so we
now use it.
(From OE-Core rev: d0bc7a53b1e61283fb155b4dcb67bc2ab3b1d7f0)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pcimodules can not work due to no modules.pcimap file, and has been
replaced by "lspci -k", so we can remove it.
Update lib-build-fix.patch since remove pcimodules-pciutils.diff.
[YOCTO# 5210]
(From OE-Core rev: 57bec61b05c0fea42f988dd52942c7d5ce8833fd)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The UBOOT_MACHINE variable needs to be set so the firmware utils can
know about some configuration settings which are board dependent. This
patch ensures the package is skipped in case UBOOT_MACHINE is unset
thus avoid its build in 'bitbake world' builds for incompatible
machines.
Fixes [YOCTO: #5223]
(From OE-Core rev: d9abcc0a2a691ca60cc1cb2f48f1748b0de73ac8)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The latest upgrade changed u-boot-fw-utils to u-boot-fw-utils-cross, which
removed the on-target fw_printenv (and fw_setenv).
Re-create the updated version of the u-boot-fw-utils recipe.
U-Boot does try to strip the fw_printenv binary by default now. To avoid
this, without patching the Makefile, we add HOSTSTRIP=true to EXTRA_OEMAKE.
The new U-Boot do also require us to configure the build for a specific
machine, thus we change the package arch.§
(From OE-Core rev: 83cb07047658e2e2b2d721e1b01553d4df3d8636)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This upgrades the U-Boot based recipes for 2013.07 release.
This removes the 2011.03, 2011.06 and 2013.01.01 versions so we keep a
single one in core. The following recipes has been upgraded:
- u-boot (remove old versions)
- u-boot-mkimage (remove old versions)
- u-boot-fw-utils -> u-boot-fw-utils-cross (renamed and reworked)
The u-boot-fw-utils-cross recipe has been reworked as it uses the
UBOOT_MACHINE to find default environment for use so it is indeed a
cross binary and not a native one.
(From OE-Core rev: c5fff5748e0aaf7e135fdd464c2104b1d3cbfd5a)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
acpid: print message if rule directory is inexist
If rule directory is inexist, the acpid initscript will exit with success,
but the daemon will be not running.
Print message in this case to tell user that the daemon is not running.
(From OE-Core rev: 66a5d15cecdf4bd267dbae5f771ebf3768232481)
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
acpid: install events directory at default.
If rule directory "${sysconfdir}/acpi/events" is inexist,
the acpid initscript will exit with success, but the daemon will be not running.
(From OE-Core rev: 8a1c6e465a562b4653f4fb4af3a3845775785485)
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's not necessary to specify the protocol parameter when it's the
default protocol for the fetcher, e.g. the default protocol for
git fetcher it git, "protocol=git" isn't needed.
(From OE-Core rev: a2bab241c64428d5109c3c5ac5de4463fbad70c5)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, the boot partition was created for the target hard drive
but there was no corresponding entry for it in /etc/fstab. Besides,
even if the boot partition was mounted, it would just result in odd
directory hierarchy like /boot/boot/grub. However, what we really need
is /boot/grub. This patch fixes this problem.
Besides, for future maintance work, this patch also renames some of the
intermediate directories. It uses more descriptive names like /tgt_root
and /src_root. The name of /ssd is dropped.
[YOCTO #5018]
(From OE-Core rev: aa67b1333b4774e1845f562085f7048df65a644f)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The grub_fix_for_automake-1.12.patch replaced pkglib with pkgdata to
make grub_0.97 build with automake-1.12. However, it forgot to set up
the pkgdatadir, thus causing grub_0.97 not shipping files under /usr/lib.
This in turn resulted in an unworkable grub.
This patch fixes this problem by setting up the pkgdatadir correctly.
[YOCTO #4997]
(From OE-Core rev: 883b1b396328e6cd67dcb4ca6fd8975b6e716c0a)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A dependency was being added on ncurses conditionally upon whether it
had been built first. Explicitly disable this dependency to stop this
from happening.
Note that grub 2.x does not need this same fix because there ncurses is only
used when building grub-emu, which is only built when the specified
target platform is "emu" which we do not use.
(From OE-Core rev: 2ca75dd0718ec37d7f131b8bcd841de6e876bd07)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user accidently tries building u-boot on a machine doesn't use u-boot
(such as qemuarm) the error message doesn't make it clear why u-boot was
skipped. To help, state the machine that was being built for again.
[ YOCTO #4945 ]
(From OE-Core rev: beef66beaee926ec3d3640b79133fdb2ccc404f0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This package isn't specific to qemux86 but all x86 machines that are using the
userspace VESA framebuffer kernel driver.
(From OE-Core rev: 3be0967f14a9865215debe7fae666bd92b4968a0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* fuse is autodetected from sysroot
* add PACKAGECONFIG to make it deterministic
(From OE-Core rev: 5e7c3228acce9f95b506ecce9712e843c35067df)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
An empty asound.conf should work for most cases. The existing asound.conf
uses plug dmix which causes arecord to fail without a special -D device
specification on the command line (as no capture device is defined).
Clear asound.conf for the default case. Any needed changes should be
made in the BSP layers.
(From OE-Core rev: 736b0da53b3b38224ae3cb6f0ebd21da7fb04f4d)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PRINC usage is removed from meta-intel, bump core PR values to ensure
no version regressions.
(From OE-Core rev: c6108ebe116eafaf0a22b5f22a3eec87c86859f4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Get patch from ubuntu to fix this:
error: GRUB requires a working absolute objcopy; upgrade your binutils
(From OE-Core rev: 18bb555268ecc11d0fb7d4f404a38f1b453f2928)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Override the hard-coded CFLAGS used in Makefile to reference our CFLAGS.
Without this patch if the DEBUG_OPTIMIZATION is enabled (using -O0) the
compile log shows acpid still using -O2 because the Makefile has various
hard coded CFLAGS defined. Instead of using the hard coded CFLAGS,
we simply define the proper set within the recipe itself.
(From OE-Core rev: 710e773b0677b75181506959492b37cf77a0951f)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A few of the recent commits have used inconsistent whitespace with
respect to tabs and spaces for indentation and alignment. Correct it.
(From OE-Core rev: 3472c1f7ab409cd91c1d4782d9e00880b84e3ae8)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add a variable called UBOOT_LOCALVERSION which when set will
place a version string in the .scmversion file of the u-boot
sources. This string will be picked up by the u-boot Makefile
and will be appended to the u-boot version. This is done to
make it easier to identify what revision of the u-boot sources
are being run. For example you can use a setting like the
following to add the short commit id to the u-boot version
string:
UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"
(From OE-Core rev: 566298409408c6103f7a9871bb13ae5449c4fd64)
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
O irony: the grub2/gnulib nag macro that says "don't use gets, use fgets" breaks the build if you're using a recent (e)glibc release that has gets removed.
Fedora already #if 0's the check in grub, so I stole their patch.
(From OE-Core rev: 261e377b08388a288ee521a3629877b89e18e42b)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This changes definition of PCMCIAUTILS_VERSION to string from a multichacter constant to avoid segmentation fault of pccardctl command.
(From OE-Core rev: aee67a229304827a12b7776a82fb1c320da9a3c4)
Signed-off-by: Takeshi Hamasaki <hmatrjp@users.sourceforge.jp>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to recent change in the oecore layer grub-efi recipe uses separate
builddir and the paths used in the do_deply need to change accordingly.
This change avoids this build issue:
install: cannot stat `/build-fri2/tmp/work/x86_64-linux/grub-efi-i586-native/2.00-r1/grub-2.00/bootia32.efi': No such file or directory
ERROR: Function failed: do_deploy (see /build-fri2/tmp/work/x86_64-linux/grub-efi-i586-native/2.00-r1/temp/log.do_deploy.5875 for further information)
(From OE-Core rev: 11ba0231244b8a27939969353e3aa668ce78f7c6)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change to the correct directory to execute gnu-configize.
(From OE-Core rev: 6972e82b33af69cfef2d05b3637ecfd79a5125da)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Makefile fix (patch) was merged upsream
Out of tree builds were also fixed
(From OE-Core rev: 8d8fb11d68fbeebf1c070277e137d3dc1dee6ad6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
v86d was building directly against the staged kernel in the target
sysroot. This has been fine in the past, but with recent (3.7) changes
to user headers into the "uapi" include structure, there are no longer
Without the preprocesor protection, v86d fails to build against any
kernel with uapi header files.
v86d doesn't actually need the whole kernel tree, the exported headers
are enough to build a working binary. This change sets the v86d variable
to ${STAGING_DIR_HOST}/usr, and once the v86d build adds "include" to the
end of KDIR, we have a valid include path to the target sysroot headers.
This also works for pre-uapi kernel headers, so the change is safe for
most (if not all) kernel's with properly exported headers.
(From OE-Core rev: 8d4256b2c9f782368a16c1458e04ed61fa82691a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
P is expanded to it's multi and other prefix / suffix name,
so use BP instead which is the BaseName and Version.
(From OE-Core rev: 4e475a66c23cd2e4e109ff1fcfa2975d595537c5)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>