The class itself currently does nothing. The idea is to mark all recipes that
make use of the texinfo utilities. In the future, this class could be used to
suppress the generation/formatting of documentation for performance,
explicitly track dependencies on these utilities, and eliminate Yocto's
current dependency on the host system's texinfo utilities.
(From OE-Core rev: e6fb2f9afe2ba6b676c46d1eb297ca9cc532d405)
Signed-off-by: Max Eliaser <max.eliaser@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We're seeing similar failures that we saw from libtool-native and libtool-cross
where /bin/sh changed from bash to dash on different machines after sstate
reusage. This patch fixes nativesdk to avoid the same issue.
(From OE-Core rev: 7994b2870dac8fd5f6db6d47043378534b644515)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scenario:
a) libtool script is built on system with bash as /bin/sh
b) machine B installs sstate from build a)
c) machine B has dash as /bin/sh
In this scenario, the script fails to work properly since its expecting
/bin/sh to have bash like syntax and it no longer does have it.
This patch forces the configure process to use /bin/bash, not /bin/sh
and hence allows the scripts to work correctly when used from sstate.
(From OE-Core rev: 24d5b449e5f4d91119f0d8e13c457618811aadfc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We wipe out and regenerate all configure files so there is no point in
patching them.
(From OE-Core rev: 8d7036cdb71e66e619053c2545cfc1fbddf1895b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If sed-native is built before these programs, hardcoded paths to sed-native
can end up in scripts and other parts of the system which may cause issues
if they are later used from sstate and sed-native is not installed.
To avoid this, this patch changes the global site configuration to
specify that plain "sed" is fine to be used. We need to spell this
out for gcc since it doesn't see the site files since we don't autoreconf
it. We can remove the values from libtool. We tell perl to use "/bin/sed"
since it requires a path and the system sed should be just fine for it.
[YOCTO #4971]
(From OE-Core rev: 2ec171cb188601bf18c6c2895870907024b1c52a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch updates libtool.m4 (and its output) to resolve a problem
with variable 'lt_sysroot' not being properly updated if the option
'--with[-libtool]-sysroot' is not provided when running the 'configure'
script for a package.
According to the help text ouput from 'configure':
--with-libtool-sysroot=DIR Search for dependent libraries within DIR
(or the compiler's sysrooot if not specified).
Due to mixed up cases in a switch statement, when checking if the option
was specified or not, wrong actions were taken resulting in an incorrect
sysroot and failures to properly locate e.g. .la files when using the
populated SDK toolchain.
For current upstream status see:
http://lists.gnu.org/archive/html/bug-libtool/2013-09/msg00005.html
(From OE-Core rev: f5cf7e1a5c85fb320faa9cbeef24f491706b4c1d)
Signed-off-by: Hans Beckerus <hans.beckerus at gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rename nativesdk item to prefix vs suffix. Some minor changes for
getting it works after renamed:
* append patches dir 'libtool/' to FILESEXTRAPATHS
* update ${S}, append '${datadir}/libtool/*' to FILES_${PN}
(From OE-Core rev: cc7deb8b8dbc58975b8f55cd63f237aa0ded0887)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you never use sstate and always build everything from scratch you
will never see this problem. However, if you use sstate and build
directories that last a long time eventually you can end up with the
scenario where libtool gets a hard coded path in it for sed, and sed
may not exist. The reason you don't see this problem to often if you
generally build from scratch is that libtool builds before sed and
will pickup the host's /bin/sed.
The way to reproduce the issue is:
bitbake some_image
bitbake -c cleansstate libtool-native
bitbake sed-native
bitbake libtool-native
bitbake -c clean sed-native
bitbake ANY_PACKAGE_THAT_USES_LIBTOOL_NATIVE
In my case I used modphp, which doesn't exist in the oe-core. You will
end up with a strange looking error like:
| make[1]: *** [buckets/apr_buckets_alloc.lo] Error 1
| /opt/build/bitbake_build/tmp/sysroots/x86_64-linux/usr/bin/x86_64-linux-libtool: line 981: /opt/build/bitbake_build/tmp/sysroots/x86_64-linux//bin/sed: No such file or directory
The solution is to always use /bin/sed for libtool-native.
(From OE-Core rev: 605e4484840e70c64acddb4aa1a3c9fec4078d9d)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this some software fails to build complaining it can't find these
utilities.
(From OE-Core rev: db84eaf851b22b262d9dc48eb55bd5224a00fdd2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove manpage creation. It wasn't working because of help2man
missing when libtool is being built. This attempt to create
manpages without help2man turns from no-op to hard error with
automake-1.13.
Removed prefix-manpage-fix.patch as only code it touched is being
removed by new dont-depend-on-help2man.patch
(From OE-Core rev: 51a97cfb96ee2e5eeef978678fe6acdd498b9555)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you:
bitbake sed-native
bitbake libtool-cross
then libtool-cross has SED="/path/to/sysroot/sed" which is incorrect. If that
is reused from sstate or sed-native is cleaned, the build will fail.
This patch simply sets sed to be "sed" since we're not on systems where
the sed from PATH is broken.
(From OE-Core rev: 86c6fa8175482283268dfa8782c6643a3510e0fd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the built-in normalization function instead of the sed hack.
(From OE-Core rev: ba8263e5dc520f5024fc76d8bd2e10fe0564b0e2)
Signed-off-by: Andy Ross <andy.ross@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Libtool may be passed link paths of the form "/usr/lib/../lib", which fool
its detection code into thinking it should be included as an RPATH in
the generated binary. Normalize before comparision.
(From OE-Core rev: e3b0925f4c861393e436deb6b1912f9f1f325d1e)
Signed-off-by: Andy Ross <andy.ross@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the new order scheme, ${PN} needs to be in the middle
for the .m4 files to be packaged, otherwise the move the
-dev package which is wrong in this case.
(From OE-Core rev: 57ad9075ea7521e8fa20d62aac31afb2e2130348)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
linker should add -lssp to linker cmdline when
-fstack-protector therefore add this knowledge to libtool
otherwise packages will fail to link
(From OE-Core rev: d1756ff379ab310bfa6323d8643b7e9d764f94bf)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While building libtool, the libtool script itself will be regenerated
because OE modifies a dependency[1]. With -jX, this operation (-->
removal, creation of non-x file, 'chmod a+x') can happen at a time when
the script is going to be executed. This can cause errors like:
| arm-linux-gnueabi-libtool: compile: ccache arm-linux-gnueabi-gcc ...
| ...
| /bin/sh ./config.status libtool
| ...
| arm-linux-gnueabi-libtool: compile: ccache arm-linux-gnueabi-gcc ...
| /bin/sh: ./arm-linux-gnueabi-libtool: Permission denied
| make[2]: *** [libltdl/libltdl_libltdl_la-lt__alloc.lo] Error 126
I am not sure whether the custom do_compile_prepend() is still needed.
For now only the issue above will be fixed by executing ./config.status
yet again.
[1] see 648290d5bf
(From OE-Core rev: e065c11b6066f8c1d37496b58dd853a684cd9136)
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes problems where hardcoded paths in the file were incorrect
during sstate reusage of the task output.
(From OE-Core rev: 69dfde005c7018b99a0397f4233841d76e383b4c)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no point in having "executable" binaries in the .libs
directory linked with different rpaths to the target which
could concivably be run on the build system when cross compiling.
This patch removes the extra rpaths ($compile_rpath) so that the
output from the "link" stage can be used on the target. We can then
avoid having to "relink" during the install stage.
This saves some build time (do_install is over 2 minutes faster for
pulseaudio).
This patch also removes an annoying "seems to be moved" warning
which is totally bogus in the sysroot case.
(From OE-Core rev: 0a1dedeb8eea4e230b47d1516b3e6e90495fe49d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should be using libtool-cross for cross compiling but
were not. This patch sets datadir so libtoolize ends up
containing correct paths. It then installs libtoolize.
The path ltmain.sh was installed to was incorrect and this is fixed.
We also now install all the libtool m4 macros and config files.
(From OE-Core rev: d52bdbee35bb6edc55eed613f869e46d0c0a2f31)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've had the check for dash as /bin/sh for a long time. Dash has been
around long enough now that most major issues have been identified and
fixed from build perspective.
This patch fixes a bashism in the openjade-native recipe. It also
adjusts libtool so that the header at the script is used and not the
value of $SHELL. This is because many Makefiles change $SHELL so dash
can get used to execute what is otherwise configured as a bash shell
script. Since we don't need to execute scripts this way on any system I'm
aware of us building upon, the simplest fix is just to remove $SHELL.
With these two changes the dash check can be removed and we can allow
builds with dash as /bin/sh
(From OE-Core rev: 07ded02ffd37b4fe60a6210dbf56490ea306f0b6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Note: I know I need to add the description of the libtool change above
into the prefix.patch]
libtool was being to aggressive in adding rpath to binaries. This
change stops it adding them if that path the default search path.
(From OE-Core rev: 99d1e3ee56c326b3ab68913e68d133a63f334696)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python: update upstream-status for patches
binutils: update upstream-status for patches
gcc 4.5.1 4.6.0: update upstream-status for patches
autoconf: update upstream-status for patches
automake: update upstream-status for patches
bison: update upstream-status for patches
distcc: update upstream-status of patches
fstests: update upstream-status for patches
gdb: update upstream-status of patches
intltool: update upstream-status of patches
libtool: update upstream status of patches
linux-libc-headers: update upstream-status for patches
make: update upstream-status for patches
perl: update upstream-status for patches
python-pycurl: update upstream-status for patches
python-pygobject: update upstream status for patches
python-pyrex: update upstream-status for patches
quilt: update upstream-status of patches
tcl: update upstream-status for patches
gnu-config: update upstream-status for patches
gmp: update upstream-status for patches
(From OE-Core rev: a62fa9b213b09bf48c48499d2e3c66a9ee306deb)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
addded a new patch:
libtool/avoid_absolute_paths_for_general_utils.patch
This fixes [BUGID #154]
This fixes [BUGID #734]
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Original we used absolute path in sysroot-destdir for both native and
target recipes. This commit changes target recipes to use relative path
which is same as the image directory.
[sgw: merged with libtool sysroot work]
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Enabling sysroot support exposed a bug where the final library
had an RPATH encoded into it which still pointed to the sysroot.
This works around the issue until it gets sorted out upstream.
Fix suggested by Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
* Added OE patches by Khem Raj which enable sysroot support
and rename the command line option --with-sysroot to
--with-libtool-sysroot to avoid conflicts with binutils and
gcc
* Removed obsolete cross_compile.patch
* Changed SRC_URI_append to SRC_URI +=
* PR bump for all recipes
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
[BUGID #562] fixing:
1. Adjusted the content of various packages generated by libtool.
2. Added libtool-nativesdk into task-sdk-host.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Taking out of this code from patch as the newer upstream code has fix,
and this patch is not needed.
cross-compile.patch:
-Index: libtool-2.2.10/libltdl/config/ltmain.m4sh
+Index: libtool-2.4/libltdl/config/ltmain.m4sh
===================================================================
---- libtool-2.2.10.orig/libltdl/config/ltmain.m4sh
-+++ libtool-2.2.10/libltdl/config/ltmain.m4sh
-@@ -5147,8 +5147,14 @@ func_mode_link ()
- absdir="$abs_ladir"
- libdir="$abs_ladir"
- else
-- dir="$libdir"
-- absdir="$libdir"
-+ # Adding 'libdir' from the .la file to our library search
paths
-+ # breaks crosscompilation horribly. We cheat here and don't
add
-+ # it, instead adding the path where we found the .la. -CL
-+ dir="$abs_ladir"
-+ absdir="$abs_ladir"
-+ libdir="$abs_ladir"
-+ #dir="$libdir"
-+ #absdir="$libdir"
- fi
- test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
- else
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Having one monolithic packages directory makes it hard to find things
and is generally overwhelming. This commit splits it into several
logical sections roughly based on function, recipes.txt gives more
information about the classifications used.
The opportunity is also used to switch from "packages" to "recipes"
as used in OpenEmbedded as the term "packages" can be confusing to
people and has many different meanings.
Not all recipes have been classified yet, this is just a first pass
at separating things out. Some packages are moved to meta-extras as
they're no longer actively used or maintained.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>