It is not possible to create a rootfs with only busybox + initscipts.
This is a result of a regression from commit
a4b53872a8a9a2743299acbff015f7f2750a69d6 (initscripts: add
/sbin/sushell for systemd service debug-shell).
The /sbin/sushell should just use /bin/sh else you end up with a
problem when creating the end image with a failed smart transaction
shown below:
ERROR: Unable to install packages. Command '/proj/bitbake_build/tmp/sysroots/x86_64-linux/usr/bin/smart --quiet --data-dir=/proj/bitbake_build/tmp/work/qemuarma9-wrs-linux-gnueabi/wrlinux-image-glibc-small/1.0-r1/rootfs/var/lib/smart install -y dropbear@armv7at2_vfp hac@armv7at2_vfp run-postinsts@all kernel-modules@qemuarma9 packagegroup-core-boot@qemuarma9' returned 1:
error: Can't install initscripts-1.0-r155.0@armv7at2_vfp: no package provides /bin/bash
(From OE-Core rev: 4917e36a77bd6821b45db52caa43939d344d92f6)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add file /sbin/sushell for systemd service debug-shell which starts with
/bin/sushell when SELinux is enabled. Copy and add sushell file from
Fedora 22.
Add runtime dependency bash as well when systemd is enabled to eliminate
QA warning:
WARNING: QA Issue: /sbin/sushell_initscripts contained in package initscripts
requires /bin/bash, but no providers found in its RDEPENDS [file-rdeps]
(From OE-Core rev: a4b53872a8a9a2743299acbff015f7f2750a69d6)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
/etc/volatile.cache is a cached copy of a script (which is
generated by /etc/init.d/populate-volatile.sh) that generates
the volatile filesystem directories. Since volatile.cache is
a generated file, it is not necessarily changed if
populate-volatile.sh is updated. As a result, the stale script
can add/remove the wrong directories on the next system boot.
If initscripts is being upgraded, make sure volatile.cache gets
deleted.
(From OE-Core rev: 317269b4a5c698e30b87bd597b436283512cbde9)
Signed-off-by: Bryan Evenson <bevenson@melinkcorp.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After removal of auto-creating S we must ensure that all recipes are
using a proper value for S.
Fix all recipes that only need to set S equals to WORKDIR.
[YOCTO #5627]
(From OE-Core rev: 9d220b1bfe4589736604dd5a7129e3699377d830)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use CONFFILES to mark editable files as such,
/etc/init.d/checkroot.sh
If there is no %config micro before the file name in the spec file,
this file will be overwritten after updating package.
This will make our settings lost.
(From OE-Core rev: a265af666a80298ccca0eb80d6f15ca3d4be8b57)
Signed-off-by: Jian Liu <jian.liu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We now support executing scripts under /etc/rcS.d. So we need to
mask several more init scripts here to prevent them from running
at boot time.
(From OE-Core rev: c8f9527f18e5dd813c0330ba409875d34c36f6ab)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the commit 'initscripts: save /etc/timestamp with seconds accuracy',
a bashism was introduced in the bootmisc.sh script in the code to set
the current date from the stored value in /etc/timestamp. This causes
that operation to fail with the following message when /bin/sh is not
bash:
/etc/init.d/rc: /etc/rcS.d/S55bootmisc.sh: line 73: syntax error: bad substitution
Fixed by using pattern matching removal rather than bash-specific
substring expansion.
[YOCTO #6566]
(From OE-Core rev: c8a451adc71e4ce9ab963f61d7830c2d75aaffca)
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Source /etc/default/urandom if present. This allows the rootfs to
remain read-only while enabling the user to override the location of the
random seed file.
(From OE-Core rev: 415e1a4ac8120b28118671698459b098c965a4f6)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
inetutils and busybox hostname utils support `hostname -F`; coreutils
hostname doesn't. So just use `cat` instead.
(From OE-Core rev: acb8674e498468088d867ffae9a458caa08d95d5)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the seed file is empty or does not exist, the date is an extremely
poor backup source of entropy, but it is better than nothing.
(From OE-Core rev: 0a41a7c20316c7d3330233a624d8cf20ea5a81ae)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, the random seed file location is hardcoded to
/var/lib/urandom/random-seed. Refactor it to a parameter
(RANDOM_SEED_FILE) so the file location is defined in only one place.
(From OE-Core rev: 558ba23cfdd60bf64b9214460a2772be70079796)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, /etc/timestamp is saved with minutes accuracy. To increase
the accuracy, modify the save-rtc.sh and bootmisc.sh scripts to save and
read /etc/timestamp respectively with seconds accuracy.
(From OE-Core rev: 8fed53e4e72230c61f23cb36eda36c228aede1e0)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
busybox sysctl may lack the "-q" setting, so simulate it with redirects.
(From OE-Core rev: 5672b5188557b940340bdc3e6a3ac30835b829fb)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a partition such as /tmp mounted on a volatile directory which create
by script populate-volatile.sh from initscripts, it will show errors.
In /var/log/boot, error message:
Thu Jun 19 05:39:09 2014: bootlogd.
Thu Jun 19 05:39:10 2014: rm: cannot remove '/tmp': Device or resource busy
Check volatile directories and if it is be mounted then don't force make
it as a link.
(From OE-Core rev: cc4b0936c7a6a1563dc88d62d8c9020791eaa446)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The base_contains is kept as a compatibility method and we ought to
not use it in OE-Core so we can remove it from base metadata in
future.
(From OE-Core rev: d83b16dbf0862be387f84228710cb165c6d2b03b)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Resolves warnings of this kind in the OpenPLi layer:
WARNING: Use of PRINC * was detected in the recipe *
(From OE-Core rev: 5ffb38d6ace7faae839c8cac7327b5b1c2daae1a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* resolves following warnings:
WARNING: Use of PRINC 17 was detected in the recipe meta-openembedded/meta-systemd/recipes-core/systemd/systemd-machine-units_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-gpe/recipes-support/fbreader/fbreader_0.12.10.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-gpe/recipes-support/fbreader/fbreader_git.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-multimedia/recipes-multimedia/sox/sox_14.4.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-oe/recipes-multimedia/mplayer/mplayer-common.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-smartphone/meta-android/recipes-bsp/chroot-script/chroot-script_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-connectivity/avahi/avahi-ui_0.6.31.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-connectivity/bind/bind_9.8.1.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-core/systemd/systemd-serialgetty.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-core/sysvinit/sysvinit-inittab_2.88dsf.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/screen/screen_4.0.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/shadow/shadow-securetty_4.1.4.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/shadow/shadow_4.1.4.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-graphics/libsdl/libsdl_1.2.15.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-graphics/packagegroups/packagegroup-core-x11-xserver.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-kernel/modutils-initscripts/modutils-initscripts.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-multimedia/libsndfile/libsndfile1_1.0.25.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-support/libcap/libcap_2.22.bb (or one of its .bbappends)
WARNING: Use of PRINC 11 was detected in the recipe openembedded-core/meta/recipes-bsp/keymaps/keymaps_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 11 was detected in the recipe openembedded-core/meta/recipes-core/systemd/systemd-compat-units.bb (or one of its .bbappends)
WARNING: Use of PRINC 12 was detected in the recipe openembedded-core/meta/recipes-core/initscripts/initscripts_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 13 was detected in the recipe openembedded-core/meta/recipes-core/base-files/base-files_3.0.14.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe meta-openembedded/meta-oe/recipes-navigation/navit/navit_svn.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe meta-openembedded/meta-oe/recipes-support/lvm2/lvm2_2.02.97.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-connectivity/portmap/portmap_6.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-extended/pam/libpam_1.1.6.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-graphics/packagegroups/packagegroup-core-x11.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe meta-openembedded/meta-efl/recipes-efl/efl/entrance_svn.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe meta-openembedded/meta-oe/recipes-multimedia/mplayer/mplayer2_git.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-bsp/formfactor/formfactor_0.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-connectivity/avahi/avahi_0.6.31.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-connectivity/dhcp/dhcp_4.2.5-P1.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-core/init-ifupdown/init-ifupdown_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 5 was detected in the recipe meta-openembedded/meta-oe/recipes-core/meta/distro-feed-configs.bb (or one of its .bbappends)
WARNING: Use of PRINC 5 was detected in the recipe openembedded-core/meta/recipes-connectivity/bluez/bluez4_4.101.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-core/packagegroups/packagegroup-base.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-core/packagegroups/packagegroup-core-boot.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bb (or one of its .bbappends)
WARNING: Use of PRINC 7 was detected in the recipe meta-openembedded/meta-oe/recipes-navigation/gpsd/gpsd_3.7.bb (or one of its .bbappends)
WARNING: Use of PRINC 7 was detected in the recipe openembedded-core/meta/recipes-core/udev/udev-extraconf_1.0.bb (or one of its .bbappends)
(From OE-Core rev: c6825ec6e92e20bb64a051d1576f363c16e98d68)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Many of the init scripts in here will do nasty things if systemd decides to run
them. Mask the obviously bad ones so that systemd won't attempt to invoke them
if initscripts is installed with systemd.
(From OE-Core rev: 844f897710dfee9c59599d09b5c8c906e0d70ac0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
define failure/success/warning/pass functions, some packages' initscript
need them, and /etc/core-lsb/lsb_log_message from lsb needs them too.
(From OE-Core rev: b78154c4a52b5a198e90bca8f83990fe9251fb72)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Many SysV init scripts need the /etc/init.d/functions script. But
this script is part of the initscripts package. As a result, the
initscripts package should always be installed into the system to
avoid errors when starting daemons. However, it makes no sense to
install the initscripts package into a systemd based image, because
what the init scripts provide has already been provided by the systemd.
On the other hand, the functions script might be still needed in a
systemd based image because other init scripts such as distcc might need
it.
The above situation leads to a natural separation of the functions script
from the initscripts package. And this patch does so. It separates the
functions script into initscripts-functions packages.
(From OE-Core rev: 736dd8380f41d6ff1d3d0e4fe33cc01e2e873ef6)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This doesn't exist when using systemd as it's part of the sysvinit package, and
this script doesn't need it.
(From OE-Core rev: 426a22bb67c7823ee733f8c2bd85421b785c3631)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In commit faa8cc6c2a582a32c695f3f2b0d45b6892c769fd dmesg.sh was
added to the set of init.d scripts. But the script was never put
in any run-level. This patch will add dmesg.sh to run-level S.
(From OE-Core rev: 7d2767d4e27c6d0eaa56f3e126df56e65a5364c9)
Signed-off-by: Hans Beckerus <hans.beckerus AT gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, if we switch to runlevel 1 and then switch back to runlevel
5, the network interface will be brought down and the NFS service will
not be restarted correctly.
The problem is that the networking and rpcbind services are brought down
in runlevel 1 but not brought up in runlevel 5.
This patch fixes the above problem. It's based on the assumption that
in sysvinit-based system, runlevel 1 does not have networking support.
This patch adjusts some init script parameters used by update-rc.d. It
makes sure that networking starts before rpcbind which in turn starts
before mountnfs.sh. When switching to runlevel 0, 1 and 6, the umountnfs.sh
is run first before stopping rpcbind service, and the network is brought
down afterwards.
[YOCTO #5513]
(From OE-Core rev: f12e1291b51ba6692b6809570d6a9b73c70a7fe9)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adjust the boot sequence in sysvinit based systems.
The mountall.sh (mounting the local file system) needs to be started
before udev and bootlogd.
This patch makes mountall.sh start before udev and removes the hack of
mounting tmpfs in the udev init script.
This patch also adds some comments to the udev init script to make it
clear why we create the '/var/volatile/tmp' directory.
[YOCTO #5273]
(From OE-Core rev: f6a9df6b7cd411b52e71022b8f7bf8bda6395649)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If bootlogd was configured to write to a log file on the root file system,
the checkroot.sh was not able to change the rootfs to read-only because
bootlogd was started earlier and had a file descriptor open. Lowering
the order of checkroot.sh ensures that the volatile filesystem is set
up before anything writes to it.
(From OE-Core rev: 13c9bc143f6861517970dafdc7e7a45740d0933d)
Signed-off-by: Jeffrey C Honig <jeffrey.honig@windriver.com>
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
So far the rules of check_requirements() is too strict to lead mismatch
when empty lines exist in volatiles.
(From OE-Core rev: 71ab9ee58b0ba5e3f5cbf403d1b8fb79fc7f5ed1)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's possible that /var/lib is on a separate writable partition. In such
situation, we should not bind mount /var/lib with tmpfs, becasue it's
already writable.
This patch fixes this problem by checking whether /var/lib is already
on a writable partition.
[YOCTO #4888]
(From OE-Core rev: 86ac10995fd08226f82d87e23fda5d4898c3190f)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In our current boot scripts, two ways are used to determine whether
the rootfs is read-only or not. One by checking the READ_ONLY_ROOTFS
value in /etc/default/rcS, the other by checking the /etc/fstab entry.
>From a normal Linux user's point of view, the way of checking the
/etc/fstab entry is preferred. However, as there are several boot scripts
that need to know whether rootfs is read-only or not, checking /etc/fstab
in each script brings too much overhead. Thus, these boot scripts
use the READ_ONLY_ROOTFS value in /etc/default/rcS.
In normal use cases, there would be no problem, as both /etc/default/rcS and
the /etc/fstab are modified at rootfs time. However, if the user changes
the mount option for rootfs in /etc/fstab to read-write, and he/she forgets
to change the value in /etc/default/rcS, there would be unexpected results.
For example, the udev-cache would still be disabled.
So at a minimal, a check for conflicting configurations between /etc/fstab
and /etc/default/rcS should be added in checkroot.sh so that there would be
reasonable warnings if users have configured the system in a non-consistent
way.
[YOCTO #4880]
(From OE-Core rev: 1565a0c5a3f245703e280ca90cf11d3f9374788a)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
device_table.txt was once used by an init script named 'devices' to
create the basic files under /dev. However, it's no longer used now.
The devices init script has been removed, and makedevs command has been
disabled by default in busybox.
Besides, considering the device managers and devtmpfs filesystem, this
file is not likely to be used again. So we remove it.
(From OE-Core rev: cc3842255ade0ad6fb312f06f5e5e1edd9767c94)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, dead links in target directory will not be copied.
This is incorrect as dead links are not uncommon in our rootfs.
So we use '-a' option instead.
(From OE-Core rev: 742440441222e0627abbdd3eb2ee16401e8f4adf)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we're building a read-only rootfs, we'll get the following error now
and then.
tar: .: file changed as we read it
The root cause is that we spawn background process at rootfs time.
When the tar command is running, it's possible that files under rootfs
are changed by background processes, thus this error.
[YOCTO #4937]
(From OE-Core rev: 4bd419f95868d5b8707a45cee5f6c5c6a840a65b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's possible that a 'No such directory' error occurs when doing
check_requirement in populate-volatile.sh at rootfs time. This is
because the $ROOT_DIR/var/tmp might be a dead link.
Use $ROOT_DIR/var/volatile/tmp as the TMPDIR instead to avoid this
error.
[YOCTO #4883]
[YOCTO #4103]
(From OE-Core rev: 7c2c36a97bab46c73a3a1fb743ad3ec67a4c072e)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, fsck is always disabled because the value of rootcheck in
the checkroot.sh script is always set to 'no'.
We should respect the value of ENABLE_ROOTFS_FSCK in /etc/default/rcS
to allow for filesystem check.
(From OE-Core rev: 5c11cf4db8f43003fb7132b92a78659f70f07ce0)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should create the /var/log/dmesg.log file as a default.
If we don't then a later kernel error can flush the dmesg
ring buffer, losing valuable debug information.
(From OE-Core rev: faa8cc6c2a582a32c695f3f2b0d45b6892c769fd)
Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
/etc/init.d/hostname.sh does not have a graceful fallback if the
/etc/hostname file doesn't exist. Other systems such as Ubuntu and RH
will either leave the hostname in place, if a proper hostname is
already set, otherwise it will set the hostname to 'localhost' when
the /etc/hostname files doesn't exist.
As you can see we have to add some additional handling to provide this
behavior when the system's hostname command doesn't take the '-b'
option.
(From OE-Core rev: 09e59f1dad9fb52adb1717840837e42a36a6c7a1)
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure that the status returns 0 instead of the last shell command result,
otherwise the calling script can not properly detect the status of pid.
(From OE-Core rev: d9d4fdc769dfe6bf9838f5c5f3189a80f0e3cf90)
Signed-off-by: Jesse Zhang <sen.zhang@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds the /run directory from the Filesystem Hierarchy Standard 3.0
Draft [1] and refactors the filesystem as follows:
- Remove creation of /var/volatile/run
- Remove creation of /var/volatile/lock
- Remove symbolic link from /var/run to /var/volatile/run
- Remove symbolic link from /var/lock to /var/volatile/lock
- Add symbolic link from /var/run to /run
- Add symbolic link from /var/lock -> /run/lock
- Add /run to /etc/fstab for sysvinit compatibility
[1] http://www.linuxbase.org/betaspecs/fhs/fhs.html#runRuntimeVariableData
(From OE-Core rev: 0e326280a15b0f2c4ef2ef4ec441f63f55b75873)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids triple slashes in the generated /etc/volatile.cache to
reduce disk usage and in the output when verbose mode is enabled.
As all the paths for volatiles start with a slash, we can change
TNAME=${ROOT_DIR}/${TNAME} to TNAME=${ROOT_DIR}${TNAME}. To avoid
a double slash when ROOT_DIR is /, we strip the extra slash from
ROOT_DIR.
(From OE-Core rev: af56670f656ec0989aa7fd6cf6037cbc9cd88185)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mount /var/volatile ourselves so that we can set up the writable area
first. This fixes the urandom service not starting properly when
read-only-rootfs is enabled.
(From OE-Core rev: 44c7d8a27a84a04251408e9a7d9550629bc17704)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Unionfs isn't available everywhere, and we can get similar results (if
not quite as neatly) by using bind mounts + tmpfs and copying the data
over.
(From OE-Core rev: 5a8ba93efa554c3b4d3b48ca8d668419a8c77f42)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
initscripts is generally installed on systemd-using images, but because it
specifies that /run is a symlink to /var/run managed by volatiles it totally
breaks systemd by copying/deleting /run from underneath systemd. Deleting
sockets mid-boot doesn't leave systemd in a happy place.
As this volatile reference of /run was introduced by udev 182, move it's
reference to the udev recipe. This way it will never be present on systemd
images, as systemd manages /run as a tmpfs itself.
(From OE-Core rev: 5b0257e318340c2d6c8d3b0c3fa32272d6e9526b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, if there's a link config item in the config file like
l root root 1777 /tmp /var/tmp
and /tmp has existed, the symlink will not be created correctly.
Another example is the /run directory. If /run directory has been
created by some recipe or script before populate-volatile.sh runs,
the symlink of /run to /var/run will not be created correctly.
This patch ensures that the system creates symlinks exactly as the
config file tells it.
[YOCTO #3404]
[YOCTO #3406]
(From OE-Core rev: a54287d8e3d75a727c8ed5654a822bda256b0849)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For populate-volatile.sh script to run correctly both at rootfs time and
at system boot time, it needs to be aware of which situation it is now in.
We use the ROOT_DIR variable to indicate whether it is run at rootfs time or
not. ROOT_DIR being "/" indicates that this script is run at system boot time,
otherwise, it is run at rootfs time.
Also, we ignore failures when running this script at rootfs time.
For example, if ${ROOT_DIR}/var/dir1 is symlink to /var/volatile/dir1, it's
possible that the link is a dead link. So if we're going to create some file
under ${ROOT_DIR}/var/dir1, it will fail. But the failure does no harm,
because this script will always run at system boot time to set up the correct
files and directories.
[YOCTO #3406]
(From OE-Core rev: 45396e3edcce4a33fcbef6456f31811f30c26c63)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[ CQID: WIND00388860 ]
Many initscripts want a simple way to display status information.
Add the 'status' function to the functions file.
(From OE-Core rev: adcb39845b6d3af9472fa5051a1d918344eb6bda)
Signed-off-by: Jesse Zhang <sen.zhang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jason Wessel
André Draszik
Kai Kang
Bryan Evenson
Petter Mabäcker
Jian Liu
Chen Qi
Ben Shelton
Richard Tollerton
Ken Sharp
Blair Elliott
Matthieu Crapet
Richard Purdie
Otavio Salvador
Mike Looijmans
Martin Jansa
Ross Burton
Roy Li
Hans Beckerus
Jeffrey C Honig
Ming Liu
Jackie Huang
Jesse Zhang
Jonathan Liu
Paul Eggleton