The linux-yocto recipes themselves always set S="${WORKDIR}/linux" and
arrange for the fetcher default of ${WORKDIR}/git to be renamed before
building.
Part of this rename involves an assumption that the directory used by
the fetcher can be removed as part of the renaming process, or in fact
that renaming is required.
If a derived recipe uses S="${WORKDIR}/git", the checkout phase fails
since the kernel source is removed as part of the processing.
To fix this the code now detects this situation and does not clean the
source directory before renaming the fetcher default (and in fact does
not rename it at all).
(From OE-Core rev: e4ab5efea1a41297f63c96de97270136535b5f0b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Although the setting of KBRANCH is the suggested/primary way to interact with
the yocto kern-tools and the fetcher, some users may be more comfortable
modifying the SRC_URI branch parameter directly.
If they do, the tools will not force their branch and build output will be
different then they expect, in non obvious ways.
It's easy enough to detect this scenario, but checking the SRC_URI in the
same way that the git fetcher checks for the branch (and SRCREV). If we take
the value from the SRC_URI and use it directly in the patch/validate/update
routines, we'll stay consistent with KBRANCH if it is used, and also
automatically adapt to a manually changed branch parameter on the SRC_URI.
For all other users, there are no visible or behavioural changes as a result
of this change
(From OE-Core rev: cfce8643ed166b51d7178be173677ea6f527d453)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To support configurations where active development is not being done within
the oe/bitbake build environment and restricted bandwidth situations, this
commit allows the SRC_URI to point to a kernel tgz instead of a full git
repository.
Outside of the upstream tgz instead of a kernel git repository, the
restrictions, config and patch process is the same as any linux-yocto-custom
recipe.
An example linux-yocto-custom based recipe would have a configuration like
this to build the 3.7 kernel, using an externally supplied config, from the
3.7 tgz:
SRC_URI = "http://kernel.org/pub/linux/kernel/v3.0/linux-3.7.tar.bz2"
PV = "3.7"
S = "${WORKDIR}/linux-3.7"
SRC_URI[md5sum] = "5323f3faadd051e83af605a63be5ea2e"
SRC_URI[sha256sum] = "dc08d87a579fe2918362e6666e503a95a76296419195cb499aa9dd4dbe171a9e"
[YOCTO #2686]
(From OE-Core rev: 08b3a282ce75a9972694f0c4379179505b9ec91f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To promote the reuse and sharing of configuration fragments this change
allows any kernel-yocto based recipe to have multiple alternate git repositories
which provide kernel feature directory trees listed on the SRC_URI.
These feature directories are in addition to any in-tree kernel meta data branches
that may be available (described via the KMETA variable in linux-yocto recipes).
Features found within these directories can be used from recipes via the
KERNEL_FEATURES variable. Features found within a feature directory are free
to include any other features that are available in any directories. In both
cases the path to a feature description (a .scc file) is relative to the
root of a given feature directory (which is how existing .scc files work)
The search order for features is determined by the order that repositories
appear on the SRC_URI.
Normal SRC_URI rules apply to any repository that is added as a kernel
feature container. A SRCREV must be supplied and it must be unpacked to
a unique directory, which is controlled via the "destsuffic" url parameter.
In addition to these standard requirements, any kernel feature repository
reference should identify itself via the "type=kmeta" url parameter. If
type=kmeta is not supplied, the repository will not be processed for
kernel features.
As an example, the following in a linux-yocto bbappend makes two additional
feature directories available to KERNEL_FEATURES and fragments.
SRC_URI += "git://git.yoctoproject.org/yocto-kernel-cache;protocol=git;branch=master;type=kmeta;name=feat1;destsuffix=kernel-cache/"
SRC_URI += "git://${KSRC_linux_yocto_3_4};protocol=file;branch=meta;name=feat2;type=kmeta;destsuffix=kernel-features-experimental/"
SRCREV_feat1 = "${AUTOREV}"
SRCREV_feat2 = "${AUTOREV}"
(From OE-Core rev: 02ad603a104b70ab74548c8018e738bfbb3c59db)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
SRC_URIs that contained git repositories or other constructs that resulted
in an extension of "." or a substring of "scc" or "cfg" were matching the
tests for patches and configs. This was due to a python tuple being used
instead of an array. Switching to an array makes the match exact and the
behaviour we want.
(From OE-Core rev: 22aa5d040604b37ba984bae9e800e56ba6e4956d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The details of the kernel configuration audit are typically a
debug action, so should be moved to bb.debug(). But in order
to maintain visibility of the results, a reference to the log
file is provided in the standard message.
(From OE-Core rev: 9ab80ad88d34622a81670cdc45cc3275fc3ebabe)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since linux-yocto based recipes have a split build and source directory,
we should export KBUILD=${B} to the devshell. This allows the kernel to
be incrementally build within the shell and not dirty the source
directory (which breaks subsequent full builds).
(From OE-Core rev: 88f88a22dfa730161168b0f228e3954178b74c6a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the past working from a non-bare clone would cause problems,
due to branches not existing in the WORKDIR clone. This hasn't
been true for some time, since the routines which convert remotes
into local branches have been functioning without problems.
So we no longer need the warning and it can be removed.
(From OE-Core rev: 42d42c24a37af0ea8896087c7cc8215eb19f633d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should always leave the tree on a BSP branch or master when
do_validate_branches completes to avoid modifying version tracked
files are part of the build process. Modifying these files will lead
to errors when changing branches, since the contents would be lost.
This is evident in the case that a the meta branch is reset to a
known SRCREV and the tree was left on the meta branch. This branch
tracks the meta/meta-series, and other artifacts of the original
tree construction. When the build process runs, it updates these same
files, which creates a conflict when switching branches.
This has been fixed in the tree construction scripts to not track
these files, but a secondary fix is also required of not leaving
the build on these branches, to allow arbitrary trees to be built.
[YOCTO #3413]
(From OE-Core rev: 57397592ff8ec16922604d398c18d53a589be41f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having a meta branch is not strictly required by the tools (and
recipes like linux-yocto-custom do not have meta branches), but the
comments in the kernel-yocto.bbclass could lead someone to think that
it was required.
This commit clearifies the comment to the following:
# We can fix up the kernel repository even if it wasn't a bare clone.
# If KMETA is defined, the branch must exist, but a machine branch
# can be missing since it may be created later by the tools.
[YOCTO #3422]
(From OE-Core rev: 421a2e2523a8f2c461479a1c0d44908cc1eaca6b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was reported that the kernel configuration checks for custom yocto
kernels had the following output:
NOTE: validating kernel configuration
grep: /meta-series: No such file or directory
grep: /meta-series: No such file or directory
WARNING: Can't find any BSP hardware or required configuration fragments.
WARNING: Looked at //cfg///hdw_frags.txt and //cfg///required_frags.txt in directory: //cfg//
NOTE: Tasks Summary: Attempted 375 tasks of which 367 didn't need to be rerun and all succeeded.
which is not inspire confidence in the output of the process.
Completely inhibiting the check is one option to remove the messages,
but that removes the ability see output, which can help move users to
a better or more fully configured linux-yocto based kernel.
To fix this, we have to ensure that the path to the meta-series is
always valid, and that the tools can deal with not all files existing
in the audit directory.
Since custom yocto kernels do not set KMETA (they don't have a meta branch),
we ensure that a default of 'meta' is passed to the audit ('meta' is always
valid), and that kconf_check itself can deal with an incomplete set of
input audit files.
The net result is output like this (using a defconfig with invalid options
for the kernel being built):
NOTE: validating kernel configuration
This BSP sets 19 invalid/obsolete kernel options.
These config options are not offered anywhere within this kernel.
The full list can be found in your kernel src dir at:
meta/cfg/standard/qemux86/invalid.cfg
There were 1 instances of config fragment errors.
The full list can be found in your kernel src dir at:
meta/cfg/standard/qemux86/fragment_errors.txt
The full list can be found in your kernel src dir at:
meta/cfg/standard/qemux86/missing_required.cfg
(From OE-Core rev: 4d1b7dae063ee4c35c426306d0e22f11ce112c72)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_validate_branches ensures that the desired SRCREV is at
the tip of every branch that contains the revision. To do this,
it looks for containing branches and processes them.
This processing was mistakenly placed before the check for an
invalid SRCREV, hence a git error message is seen in the log
if a bad SRCREV is used, rather than a clear message.
reordering the checks, and fixing a check for master, ensures
that clear messages are generated in all cases.
(From OE-Core rev: 7e4518bf88af53b09536a3bafcd4c392a094023f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When patches fail to apply, the status of all pending patches should
be exported to the logs and to the user. Currently, a missing export
of GUILT_BASE makes it look more like an internal error, than a 'normal'
patch failure:
| [ERROR] unable to complete push
| pending patches are:
| Patches directory doesn't exist, try guilt-init
With this variable exported, we have this:
| [INFO] validating against known patches (qemux86-standard-meta)
| error: patch failed: Makefile:2
| error: Makefile: patch does not apply
| To force apply this patch, use 'guilt push -f'
| [ERROR] unable to complete push
| pending patches are:
| links/files/0002-makefile-patch.patch
(From OE-Core rev: b2b2512cbc4196fa0f814be3677517dab30e5b52)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The commit a9f11849 [linux-yocto: explicitly export KMETA to scripts]
allows the meta branch name to be changed by exporting it to all
phases of the build.
But if a custom kernel without a meta branch is built, we end up
passing an empty string to the creation scripts, which breaks the
build since input is expected.
Inhibiting the export of KMETA to the creation scripts when empty
fixes the problem.
(From OE-Core rev: 61162fbe01993659301fe2e821bf9c3e801206d8)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To support custom repositories that set a SRCREV and that only have
a single master branch, do_validate_branches needs a special case
for 'master'. We can't delete and recreate the branch, since you
cannot delete the current branch, instead we must reset the branch
to the proper SRCREV.
(From OE-Core rev: de5bb5879fa3282c46dc1ede36af34eaab8f647f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kern-tools scripts can support a meta branch and directory of a name that
isn't "meta", but they need the name passed through the environment variable
KMETA. ensuring that KMETA is exported in the shell environment sets the stage
to support flexible meta branch name.
(From OE-Core rev: 9b90c8ace04c88ac6105f0bf686f9abc70fe8074)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel branch is no longer required by the yocto-kern-tools
to locate BSP feature descriptions (it is the MACHINE:KTYPE
descriptor), so we no longer require that the BSP branch be
explicitly set.
If a kernel branch is explicitly set, it is now used to trigger
a checks to ensure that the branch really is being built.
Otherwise the branch that the machine description creates will
be built (just as it always was).
This further simplies the use and configuration of a linux-yocto
based kernel recipe.
(From OE-Core rev: 3cac3ce65abae9dc253641a2004440a2b38fd44d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In do_kernel_checkout(), replace the creation of ${S}/.git with just
the creation of ${S} since the .git subdirectory is created only a few
lines later using a "mv". Here's the original code:
rm -rf ${S}
mkdir -p ${S}/.git
echo "WARNING. ${WORKDIR}/git is not a bare clone."
echo "Ensure that the SRC_URI includes the 'bareclone=1' option."
# we can fix up the kernel repository, but at the least the meta
# branch must be present. The machine branch may be created later.
mv ${WORKDIR}/git/.git ${S} <-- See? There it is.
There's no functional change here, it's just less confusing.
(From OE-Core rev: f0d318177096a7a1c7406642663ae4ce28010d12)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 072476bb6468d984ae3246f478fd5b3a21f7c8d6)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bb and os modules are always imported so having these extra import calls
are a waste of space/execution time. They also set a bad example for people
copy and pasting code so clean them up.
(From OE-Core rev: 7d674820958be3a7051ea619effe1a6061d9cbe2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the kern-tools SRCREV to pickup the following functionality:
- buildall: provides the ability to build all kernel branches
without a build system, only a cross compiler and configme
are required.
- robustness/cleanups: obselete/unused code removal and general robustness
fixes from Paul Gortmaker and Bruce Ashfield
The following kern-tools commits are part of this series:
b8dfd3d buildall: add whitelist/blacklist support
0ef039c configme: catch errors found during fragment sanitization
5b6498c buildall: remove all instances of it using/reading scc files
2e57550 buildall: support semi seamless restarts
4b5dd4d kconf_check: simplify cmdline args, dont store data per branch
58fbb6e configme: relieve it of all knowledge of scc files
a03e291 configme: strip out alternative meta series logic.
96d2bcf kgit-init: check for valid branchpoint
5598db6 buildall: allow a max cap on the number of builds done
b46abec buildall: add support for randomizing build order
68a04e9 buildall: dont copy failed build logs into main build dir
5575d85 buildall: script to independently build all board kernels
86d6200 configme: delete unused variable
8d4e29d configme: delete unused KPROFILE setting
7e15436 configme: ensure we have a valid machine type set
152b9cb scc: remove depreciated/unused commands
bb4e96a scc: allow includes within conditional statements
7da7951 configme: derive path to tools from $0
152dc45 configme: test for BUILD_DIR != ""
129f7b0 kgit-scc: add warnings about bad input args.
e977662 kgit-scc: add text for no arg and invalid arg case.
[YOCTO #843]
(From OE-Core rev: be3cff86d55db6255e036d68e943e527802b4f4c)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, ccache is used if it is present. When building from scratch it gives
no performance improvement and creates a ton of empty directories even when its
not in use.
This change moves ccache support to a bbclass file which the user can choose to
enable. This should make builds more determinstic and make it easier/clearer
to the end user when its being used and when it is not.
(From OE-Core rev: 2acf8da4f13c175ea818b9514677b7059de1e3e2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
One of the patch backends to linux-yocto is guilt, which normally
tracks patches under .git. But .git isn't something that can be
checked into a SCM and repeated. So it has been moved under meta/patches
and committed to the meta branch.
If devshell is used, GUILT_BASE isn't set, so patch manipulations will
fail. We export GUILT_BASE and point it at the meta directory when
devshell is invoked for linux-yocto.
(From OE-Core rev: 10546e42a0db6a9585488536e29759239ef6e73b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to support repositories of various types (with or without
meta data, branched, pristine, custom, etc) information about the
type of processing that is required was passed to the processing
phases via variables.
The combination of variables involved in coordinating the processing
creates a learning curve and overly complicates recipe extensions.
With minor tweaks to the kern-tools, adding flexibility and keying
off the existence of the meta branch it is possible to remove all
of the variables that were added to support different repository
types.
(From OE-Core rev: 06e5f45c8f38925cd5902a3a3f436f5e9451dd16)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In fixing an existing patch migration bug, the list of valid extensions
got out of sync from the core patch class. As a result, valid patches
were not being applied to the tree.
Updating the tools to migrate .diff files fixes the issue.
Also in this fix is the removal of .patch in the find_sccs() routine, since
it will never be returned by patch.bbclass when all non-patches are
requested, it is simply confusing.
(From OE-Core rev: 0ade3f26f40b67d7296725b1e956c46be9a86089)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During testing/extension of the linux-yocto-tiny kernel it was found that
defconfigs were not always properly applied. This was due to two issues:
- not being able to fully control the order of objects applied to the
git tree on the SRC_URI
- defconfigs triggering --allnoconfig before being applied
To fix this, the recipe space code that previously detected and generated
automatic features moves back to the kernel tools (where it was before) and
is updated to also process .cfg and defconfigs. Moving this back to the
tools allow other recipes to automatically benefit from the additional
support.
The second issue is addressed by allowing configme to take --alldefconfig
when a recipe wishes to pass a defconfig and override the default
behaviour.
Fixes [YOCTO: 2250]
(From OE-Core rev: 08c368b9980716e459d846dd7183940a5bf8bea4)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are a few extra task that modify the source tree that should
be removed when externalsrc is inherited by a recipe that uses a
linux-yocto tree.
Adding those tasks to SRCTREECOVEREDTASKS means that they are skipped
and externalsrc works as intended.
(From OE-Core rev: e3117fb15498c899282f25a195f3dd3dc889168c)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During the work to enhance the ability to specify out of tree kernel
features, an assumption was made about PN being part of a patch
path. This assumption is incorrect, since patches can be anywhere in
the valid FILESPATH.
To make locating the patches in WORKDIR simple, we can just query
patch.bbclass and return both the absolute directory of the patch
and the subdirectory as it was specified on the src_uri.
(From OE-Core rev: ecade4c986e5045879ea204e31457c9b53a15e33)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The steps in do_kernel_checkout modify the source tree in WORKDIR.
If it is called multiple times, or interrupted, the tree is left
in an inconsistent state.
This change adds protections around branch names, and around the
manipulations of directories to ensure that it is safe to call
at any point.
(From OE-Core rev: f937977f241e786c5a7438449ed4c9da4c55829b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Not all users of the checkout phase of linux-yocto have all
branches present. This is normal, and should be supported. By
checking for an empty KBRANCH we can avoid validating a branch
that isn't supposed to exist.
[YOCTO #2032]
(From OE-Core rev: fb2b3c7c10df1b44679a20e7dffd37f07fd01aba)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The typical workflow for linux-yocto simply uses a remote
upstream repository (Whether it is mirrored or not), and in this
case there are no issues with consistency in the format of the
resository that is unpacked into the WORKDIR.
When working with a local linux-yocto repository for kernel
development the remote vs local branches is not always consistent
between repositories.
The suggested/documented workflow has always been to use a
bare clone of linux-yocto, and use a second working tree repository
for development. Changes flow from the working tree to the bare
clone and then into the working directory for build. A common
mistake that happens with this workflow is that the non-bare,
working repository is used instead of the bare clone version.
If a non-bare repository is reference by the SRC_URI, then the
branches that are fetched into WORKDIR are not consitent. If the
MACHINE and META branches are not present, cryptic build errors
will result.
To solve this problem, the checkout code has been changed in
several ways:
- works with a newly proposed 'bareclone' option to bitbake
- detects if a bareclone is present in WORKDIR or not and
adjustst the checkout accordingly.
- if a non-bare clone is detected, machine and meta branches
are checked. If they are not present, or can't be created
a clear error message is produced
- instead of manipulating the refs directly in the git tree,
local tracking branches are (quietly) created for remote
branches. Enabling a better workflow in the WORKDIR kernel
repository.
This has been tested with linux-yocto remote upstreams, local
bare and non-bare respositories. All builds succeed or fail
with clear error messages.
(From OE-Core rev: e3b6537cc7931636ab11ae6ed2c8fbaad9da91bc)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In a similar manner to calling the patch.bbclass to locate patches that
were listed on the SRC_URI, it is also useful to query about 'other' items
that are on the SRC_URI. In the case of linux-yocto, it allows us to
know about kernel features that were specific on the URI and then apply
them to the current tree.
(From OE-Core rev: 3e2ce87566124db8c78472f9a4f00ab26410f213)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the switch to using src_patches and using patches in their
source directory, the scanning of WORKDIR migrated items like
config fragments was dropped. Adding WORKDIR back as a patch
directory restores the old functionality.
(From OE-Core rev: fd46d2ec75a53a02464ab2f0bc69eb1971432c9a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To support larger out of tree kernel features and enhanced patching schemes,
this changeset modifies the linux-yocto patching routines to call the
recently factored out 'src_patches' routine. Using the returned list of local
URIs for all valid patches, the logic can then determine whether or not
patches can be used in place, or need to be migrated and have re-usable
kernel features created. The results are then fed to the existing
infrastructure to be applied and commited to the tree.
(From OE-Core rev: dca97bbdbfc88c91287e74eb6a3974277f1028b7)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The changes made to prefer in-tree kernel tools forced the location
of kconf_check prematurely. For maximum flexibility, locating it
on the PATH is ideal, since the transition to in-tree tools will be
completely transparent.
(From OE-Core rev: 68684b4903261cc5d3f48355f7cc6671484bb546)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When creating a minimal config or creating a hard baseline for
incremental changes, it is often desired to disable all kernel
options and then begin building and enabling only what is required.
To support this workflow, a new variable KCONFIG_MODE is introduced
to contain a hint to the kernel configuration about how the kernel
config should be produced. This variable is passed directly to lkc
when it is invoked during configuration, so the contents of the
variable must be a valid option for the kernel config build.
Additionally, when a defconfig is detected, allnoconfig is enabled
as the default operation, unless otherwise specified by KCONFIG_MODE.
(From OE-Core rev: 644f2e525b910b9ff8d9aaa33f11eba3fefa7c85)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kernel configuration validation takes place between two files. An
unprocessed configuration file (which is all the options found in
the various configuration fragments) and the final .config produced
by the lkc.
The unprocessed configuration file's name historically is based on
the name of the branch that was used to build the BSP. But with the
ability to map machine names to arbitrary branches, this is no longer
always true.
Searching for the pattern *-config-* in the meta subdirectory will
only match the config file, and frees the config validation phase
from being concerned with what branch was used to build the BSP.
(From OE-Core rev: 92e0d61f5bf15ca4eb262dfa3c533f9209a87915)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After constructing a kernel configuration file it then needs
to be located in the tree so it can be audited against the
final .config. The previous string that was used for the search
pattern contains the kernel version. If the recipe space kernel
version and internal tree version are out of sync, this will
cause the constructed config to not be found. By removing the
version from the search string, we can still find out config and
gracefully adapt to minor version skew.
(From OE-Core rev: f072ddc43828ebe8df4dd7433726775dd547580b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1350]
Since do_kernel_configme is added before the standard do_configure task
we needed to add CCACHE_DIR so when the kernel builds it's host configure
tools the CCACHE_DIR exists.
(From OE-Core rev: 564d5fd5a289be0ca47d53608e43f9b78d5c6ee0)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building an external tree or bootstrapping a BSP the
external branch may not have been checked out. The tools now ensure
that the tree is ready for configuration, so we no longer need to
force the checkout of the external branch.
This change is coupled with some kern tools tweaks as follows:
40d9bab updateme: allow the location of board descriptions based on defines
59859ca createme: use branch name when creating meta data
91b4275 configme: determine meta branch based on directories, not branch naming
f5a915c kgit-meta: make branch creation and renaming more robust
(From OE-Core rev: 02c82bf5255b09bb27a0a4509861a3d2bd84b09f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To support the mapping of any oe/yocto MACHINE to a kernel
branch that may not share that naming structure we have
KMACHINE and KBRANCH. To allow the mapping to work, we
actually have to pass KMACHINE into updateme and not MACHINE.
(From OE-Core rev: 658f2cc721b121c0a9a9e7aa8b41463952314c0b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For kernel's that use a split source/object build the copy
of defconfig to {S} in the base kernel class is problematic.
The previous solution for this was to override the do_configure
of the base kernel class in a subclass. While this is still
a viable/valid option, it does mean that changes to the base
do_configure will be missed.
The solution to this is to copy a defconfig to {B} which is
typically the same as {S}, so most kernel recipes won't see or
care about this change.
With this change in place, linux-yocto.bbclass can drop its
override of do_configure.
Tested with linux-yocto and oe linux recipes.
(From OE-Core rev: 4f03d922ce32f602a5a407cf422d82a0d036e4a0)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you include a bitbake variable as a comment in a shell function
then it gets expanded by the bitbake signature handling code.
This could be classed as a bug or a feature depending on your viewpoint
(e.g. a multiline variable included in a comment could actually contain
executable code).
Since we don't always want kernel-yocto to reparse this changes the
syntax of the comment so it doesn't trigger the problem.
(From OE-Core rev: 512be74ee0d7ad7e76c1be62d1e0f499aa51d174)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a BSP or layer specifies an AUTOREV for SRCREV, the logic
that matches expected vs real branch heads doesn't apply. We
always want the latest.
To solve the issues with invalid git revs causing validation
failures, we detect the AUTOINC value and do a early return,
skipping validation.
(From OE-Core rev: b4f1845f7cf42059984112e3f41a323b4c9d6dfd)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are valid reasons to build repositories without meta
data present and there are times when this is an error. This
change adds sanity tests to the build process to detect missing
meta data and throw an informative error message.
Sanity checking is only triggered from recipes (linux-yocto)
that always require meta data to be present. Other recipes
are not impacted and can auto-generate meta data as required.
Without this change the build process suceeds, but incorrect
meta data will be used (with no user knowledge), which is not
the desired behaviour.
(From OE-Core rev: adf9f92e2f8f6cc3deba72a194ded85e160ad9e3)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>