SDKs are constructed in a similar manner to images, and the contents can
be influenced by a number of different factors, thus tracking the
contents of produced SDKs when buildhistory is enabled can help detect
the same kinds of issues as with images.
This required adding POPULATE_SDK_POST_HOST_COMMAND and
SDK_POSTPROCESS_COMMAND variables so that data collection functions can
be injected at the appropriate points in the SDK construction process,
as well as moving the list_installed_packages and
rootfs_list_installed_depends functions from the rootfs_{rpm,ipk,deb} to
the package_{rpm,ipk,deb} classes so they can also be called during
do_populate_sdk as well as do_rootfs.
Implements [YOCTO #3964].
(From OE-Core rev: c3736064483d4840e38cb1b8c13d2dd3a26b36aa)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The tclibc file for uclibc already empties IMAGE_LINGUAS, so there's no point
to this conditional as far as I can tell, and it can cause issues for certain
values of TARGET_OS.
(From OE-Core rev: 0fdda5840452c7715ed775d5d18d9f850396f483)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was removed from package_rpm and package_ipk years ago, and shouldn't be
needed, installing the packages from package_linguas should be sufficient.
(From OE-Core rev: e9485c7077e5a9508371bbbbebdaaf1e9685da61)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- the system should be using "armel" by default, not "arm"
[YOCTO #3741]
(From OE-Core rev: 74c671a609172a3801e53fe93e2853c4f0eb93b1)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When build meta-toolchain-sdk in a newly created environment, there is
an error:
...
packagegroup-core-standalone-gmae-sdk-target set to manually installed.
You might want to run `apt-get -f install' to correct these:
The following packages have unmet dependencies:
avahi-dev: Depends: avahi (= 0.6.31-r6.1) but it is not going to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a
solution).
...
In this case, avahi was installed and then removed by dpkg (the reason is
unknown, only with log `Noting disappearance of avahi, which has been
completely replaced'), the uninstall was done by dpkg rather than apt,
and apt detected the package dependency was broken, so apt-get install failed.
Use `apt-get install -f' to correct the upper broken dependencies in place.
The removed avahi will be reinstalled.
[YOCTO #3720]
(From OE-Core rev: a66ed54490305380c549838f9a580528d5b49275)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
when build deb image, such as building meta-toolchain-sdk in x86_64 host,
there is warning like that:
...
'x86_64' is not a valid architecture name: character `_' not allowed
(only letters, digits and characters `-')
...
The params in deb package control file don't allow character `_', only
letters, digits and characters `-' allowed. Change the arch's "_" to "-"
in the deb package's control file at the control file creation time. Such
as `x86_64'-->`x86-64'
[YOCTO #3721]
(From OE-Core rev: 8487b352cabd8c8ae8a7d9e7e66489e4e964bd50)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dpkg-deb verifies that conffiles exist, so verify that the specified files
actually exist before writing them to conffiles.
This mirrors the behaviour of FILES and package_rpm's CONFFILES handling.
(From OE-Core rev: 767a3d1c45f97add720174a7034df750bfb09a8e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The package_xxx_install functions date from a different era and are not used by
anything. In the rpm case, they're simply unimplemented, in the tar case they're
using broken whitespace and deprecated functions. We might as well clean
out the old broken unused code.
(From OE-Core rev: 3684036213c9b1c27389260b7a1e3441c6bd659d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If for whatever reason the package directory is empty of packages, it
makes sense to error early rather than later in what become much
more obtuse errors. This adds in a sanity check to each of the packaging
backends. It also removes the duplicate createrepo call since the
core index creation function now uses this directly after the switch
to smart.
(From OE-Core rev: 721ef058b37604e100021ec7a90ad2f745d83916)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we don't do this, stale files can build up, particularly with the PR
server.
(From OE-Core rev: c30ae39229b35d72e2205040d76754b5120fa878)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, do_rootfs has a dependency on all the do_package output being present
due to its usage of the pkgdata directories. This means that if you run:
bitbake xxxx-image -c rootfs
you end up having to fetch and unpack all the do_package data which is usually
large and inefficient. It also means rm_work has to leave all the do_package
data lying around so rootfs works.
This patch splits the actual creation of the pkgdata directory off into a separate
task, "packagedata" which happens immediately after do_package. We can then remap
the dependencies so this task is depended upon, not do_package. Sstate can then be
programmed not to require do_package at the appropriate times.
Whilst this patch doesn't do so, it opens the possibility of rm_work wiping
out the do_package output from WORKDIR as long as it also removed the do_package
stamp (both normal and setscene variants) and allowing more space savings
with rm_work which has been regularly requested.
(From OE-Core rev: 6107ee294afde395e39d084c33e8e94013c625a9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace ( or ) with __. This allows RPM style dependencies to be satisfied
in deb style packages.
(From OE-Core rev: 12acb6bb00ba665571fcfbdb0ef4668ca0a98d5b)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bb.utils.explode_dep_versions function has issues where dependency information
can be lost. The API doesn't support maintaining the correct information so this
changes to use a new function which correctly handles the data.
This patch also fixes various points in the code to ensure that we do not have any
duplicates in things that use explode_dep_versions.
A new sanity test to test the contents of the R* variables is also added.
[Some changes from Mark Hatle <mark.hatle@windriver.com>]
(From OE-Core rev: 16a892431d0c0d03f8b561b92909cf2f11af4918)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In deb and ipk, < means <=, while > means >=... there is a different
operator << and >> that means < and >, so we map them when constructing
the packages.
(From OE-Core rev: bbcc78d8ff03725ce5b3b65ce24025c3da45f2ab)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oe-core removed the prerequisite to have sh as bash. POSIX doesn't define
any options and furthermore allows 'echo -e' to be the default behavior.
This means that in dash 'echo -e' will actually print '-e' and interpret
backslashes by default. We use instead 'printf' builtin command with or
without '\n' to simulate 'echo -e' or 'echo -n'.
'printf' needs format while 'echo' can be used without any arguments. So
'echo >' was replaced by 'printf "" >'.
'echo' without '-n' flag adds a new line by default so to keep the same
behavior of two new lines while using 'echo "\n"', 'printf "\n\n"' is
used.
[YOCTO #3138]
(From OE-Core rev: a19880ad10ccb5d7d909dcf9de5c3dc58a0ebcd3)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we want to query the PACKAGE_ARCH from the installed package (as we
do in order to be able to do a pkgdata lookup for example) then we need
to have this stored in its own field as this is not always the same as
the Architecture field for deb packages.
(From OE-Core rev: 3f4f6726646e18ae21919e2f361b669332796aef)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a recent change, the path to log files may be contained within an
arbitrary directory. To generate the manual log files in the correct path
we should be using the ${BB_LOGFILE}'s path instead of always assuming the
logs go into ${WORKDIR}/temp.
(From OE-Core rev: 779db325d407f0bade84572ef99fdad4d0c88011)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we don't do this it will match on expressions like "NOTE:" which
are not fatal errors.
(From OE-Core rev: 8f4e160ce0b0c755545d62b06db14decd45b9f1e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace os.system with subprocess.call since the older function would
fail (more or less) silently if the executed program cannot be found
More info:
http://docs.python.org/library/subprocess.html#subprocess-replacements
[YOCTO #2454]
(From OE-Core rev: a07d03cc6f67c88feb9813ae7deb6e4a93552dfe)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The usage of this function renaming and it being called using
bb.build.exec_func() causes needless indirection loops, confusing log
files and seems generally pointless.
This simplification makes the process much simpler and faster. I can't
come up with a good reason why the export_functions functionality is
needed for this function.
(From OE-Core rev: 74daad03ca29a03b0005f7d2b90a0347d5b583a5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
apt is looking for Packages.gz files instead of the .bz2 files we are
currently creating and failing when they cannot be found. It is not
immediately obvious how to make the current version use the .bz2
indexes; thus create .gz indexes for now which allows us to
successfully create images.
Tested on both a Fedora 14 and an Ubuntu 11.10 host machine.
Fixes [YOCTO #1858].
(From OE-Core rev: 518f4af617f91b209086acb51454393147aa92dd)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Explicitly set umask to 022. Otherwise the build system's
umask may leak into the image.
(From OE-Core rev: d2a54427481856238bdfec9723cf575088320512)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Complete the bb.data.getVar/setVar replacements with accesses
directly to the data store object.
(From OE-Core rev: 2864ff6a4b3c3f9b3bbb6d2597243cc5d3715939)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1070]
Currently with deb packaging, we have 2 issues when running
"bitbake meta-toolchain-gmae".
1) when MACHINE="qemux86", SDKMACHINE="i686", INSTALL_BASEARCH_DEB is "i686",
too. This causes the following ERROR:
| E: Couldn't find package task-sdk-host-nativesdk
NOTE: package meta-toolchain-gmae-1.0-r6: task do_populate_sdk: Failed
This is becasue: due to the DPKG_ARCH mapping, we create such a deb package
tmp/deploy/deb/i686-nativesdk/task-sdk-host-nativesdk_1.0-r10_i386.deb; dpkg
can't recoginze the package. We need to map INSTALL_BASEARCH_DEB in the same
way.
2) when MACHINE="qemux86", SDKMACHINE="x86_64", INSTALL_BASEARCH_DEB is
"x86_64", too.
We get such an ERROR:
| E: Couldn't find package task-cross-canadian-i586
NOTE: package meta-toolchain-gmae-1.0-r6: task do_populate_sdk: Failed
This is because: dpkg can't recognize the generated package
tmp/deploy/deb/x86_64-nativesdk/task-cross-canadian-i586_1.0-r0_i386.deb
Here the "i386" suffix is incorrect and should be "x86_64" -- the i386
comes from the line
DPKG_ARCH_i586 ?= "i386" in package_deb.bbclass.
However, for canadian package, actually here the overriding of DPKG (from
"x86-64" to "i386") should not happen -- it accidently happens just because
TARGET_ARCH exists in OVERRIDES. We can move the overriding logic to the
anonymous python function to work this around.
(From OE-Core rev: 63010b9ee89643c8e83656783231f0a7848d9e45)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the stderr msgs go into log.do_rootfs and can cause a fatal failure
in "log_check rootfs".
However, the err msg could be spurious since we *only attempt* to install the
the packages, which may not exist actually. E.g., without this patch, we can
get a fatal ERROR due to
E: Couldn't find package task-core-tools-dev.
(From OE-Core rev: 5f00bda874ccaebdb00714b5cb5227462d43f8fb)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add SDK_PACKAGE_ARCHS to avoid the sed operations we were previously doing
inside of the variouns populate_sdk functions and related items.
Also add documentation to populate_sdk to explain when the various functions
are expected to be doing.
Finally fix a bug in populate_sdk_rpm where the wrong value was being set,
noticed while working on this change.
(From OE-Core rev: 587c1d5bac71fa6faa65ee3a271391cbf931e8f7)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use PKGE/PKGV/PKGR to build various package feed in tasks of pacakge_write_xxx.
(From OE-Core rev: c2872315905fcdf6e4bf11fe96e5ca62af3475f8)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1024]
Currently package-index.bb only supports ipk. This commit adds the support
for rpm and deb, too.
------------------------------
How to generate and use repos:
1) run "bitbake package-index" after building some target,
e.g., core-image-sato-sdk;
2) export ${DEPLOY_DIR_RPM}, ${DEPLOY_DIR_IPK} and ${DEPLOY_DIR_DEB} by a
webserver on the host, assuming the host IP is 192.168.7.1, at
http://192.168.7.1/rpmhttp://192.168.7.1/ipkhttp://192.168.7.1/deb
3) inside the target, according to the packaging system (rpm, ipk or deb) used
when we generate the target image, we can use different ways to manage
packages:
3.1) RPM
run "zypper addrepo http://192.168.7.1/rpm main; zypper refresh"
to retrieve info about the repo; next, we can use "zypper install/remove"
to manage packages.
3.2) IPK
add the repo info into opkg config file, i.e., in
/etc/opkg/arch.conf, we can add something like
"src i586 http://192.168.7.1/ipk/i586", and next, we run "opkg update" to
make opkg update the list of available packages. And later, we can use
"opkg install/remove" to manage packages.
3.3) DEB
Currently in target, some important config files, like
/var/lib/dpkg/status and /etc/apt/sources.list, for deb/apt are missing. So
we can't install/remove package in target at present.
(From OE-Core rev: 01e34bdb43e0cc27c1cfffd6730c384f40c404c1)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we don't do this, the ipk/rpm backends can create temporary files and then
when the deb package creates new files, those inodes can be reused and permission
confusion results.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
package_deb.bbclass:
1. Added new function package_update_index_deb() to generate package
index files.
2. Added new function package_install_internal_deb() to install a list
deb packages to a specified root directory, with the specified package
architecutre information.
rootfs_deb.bbclass:
Used the above new functions to install the rootfs.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Move function rootfs_xx_log_check() from rootfs_xx.bbclass to relevant
package_xx.bbclass. (Where xx is rpm/ipk/deb).
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
If sstate was used to accelerate a build, the pseudo directory might not have
been created leading to subsequent task failures.
Also, sstate packages were not being installed under pseudo context meaning
file permissions could have been lost.
Fix these problems by creating a FAKEROOTDIRS variable which bitbake ensures
exists before running tasks and running the appropriate setscene tasks under
fakeroot context.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
[BUGID #281]
Add the ability for the deb, ipk and rpm classes to use the new summary
and description fields. The Description is wrapped around 75 characters
to ensure a reasonably nice, presentable description.
(Summary defaults to the description if Summary is not defined.)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>