For the purposes BB_SETSCENE_ENFORCE is designed for (in OE, it is used
by the installation process for the extensible SDK), we don't actually
need the whitelisted real tasks to execute - we just need to have them
in the dependency tree so that we get all of the setscene tasks they
depend on to run. Therefore we can actually dry-run those real tasks
i.e. they won't be run (and thus we won't waste a significant amount of
time doing so) and won't be stamped as having run either. We do already
have a dry-run mode in BitBake (activated by the -n or --dry-run command
line option), but it dry-runs the setscene tasks as well which we don't
want here.
Note that this has no effect on the checking we are doing with
BB_SETSCENE_ENFORCE to ensure that only whitelisted real tasks are
scheduled to run - that's handled separately.
Fixes [YOCTO #10369].
(Bitbake rev: 58f084291beb3a87d8d9fdb36dfe7eff911fa36b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow the client to set variables with the setVariable command and have
those changes take effect when running tasks. This is accomplished by
collecting changes made by setVariable separately and pass these to the
worker so it can be applied on top of the datastore it creates.
(Bitbake rev: 69a3cd790da35c3898a8f50c284ad1a4677682a4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that we use python3, we should refer to pip3, not pip.
[YOCTO #10774]
(Bitbake rev: 99136f5f591deef0c96d9aea2dbea1c216f38121)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Looking further at the CPU loads on systems running large numbers of tasks,
the following things helps performance:
* Loop on waitpid until there are no processes still waiting
* Using select to wait for the cooker pipe to be writable before writing
avoiding pointless 100% cpu usage
* Only reading from worker pipes that select highlights are readable
(Bitbake rev: 9375349e27b08b4d1cfe4825c042d4c82120e00b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Write the pid file out in the start up of this management command. This
ensures this has happened instead of relying on the shell command having
been run which may or may not be the case. This also makes it simpler for
testing.
Couple of clean ups of runbuilds as identified by pyflake
(Bitbake rev: 999e980ee1a58d16f33ef6c0e41aecdcd0206f39)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
getVarFlag() now defaults to expanding by default, thus remove the
True option from getVarFlag() calls with a regex search and
replace.
Search made with the following regex:
getVarFlag ?\(( ?[^,()]*, ?[^,()]*), True\)
(Bitbake rev: c19baa8c19ea8ab9b9b64fd30298d8764c6fd2cd)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
(Bitbake rev: 3b45c479de8640f92dd1d9f147b02e1eecfaadc8)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I noiced builds where tasks seemed to be taking a surprisingly long time.
When I looked at the output of top/pstree, these tasks were no longer
running despite being listed in knotty. Some were in D/Z state waiting for
their exit code to be collected, others were simply not present at all.
strace showed communication problems between the worker and cooker, each
was trying to write to the other and nearly deadlocking. Eventually, timeouts
would allow them to echange 64kb of data but this was only happening every
few seconds.
Whilst this particularly affected builds on machines with large numbers
of cores (and hence highly parallal task execution) and in cases where
I had a lot of debug enabled, this situation is clearly bad in general.
This patch introduces a thread to the worker which is used to write data
back to cooker. This means that the deadlock can't occur and data flows
much more freely and effectively.
(Bitbake rev: 3cb0d1c78b4c2e4f251a59b86c8da583828ad08b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Print full traceback instead of just the exception message in the
child() function inside fork_off_task(). This makes debugging a lot
easier as the function catches a generic "Exception" and the exception
message alone might not give much information.
[YOCTO #10393]
(Bitbake rev: 9c7cc981408c9b4bbbff98ae93ff22199f6a8219)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Setting OEROOT in toaster script makes oe-init-build-env to
break with error:
bash: ../bitbake/bin/../../scripts/oe-buildenv-internal: No such file or directory
This happens because OEROOT contains path relative to build
directory.
Renamed OEROOT to OE_ROOT and unset it after it's used.
(Bitbake rev: 3b0967b160dc6123ef75e6f378221347bd923f1b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Toaster script kills runserver process 2 ways:
- sending signal to pid from .toastermain.pid.
- sending signal to pids found by grepping ps output:
ps fux | grep "python.*manage.py runserver"
Second approach is redundant and harmfull as it kills all django
development server running on the machine.
[YOCTO #7973]
(Bitbake rev: 0f47b17fe88dc660648d94b2d8d8286d87ae6295)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This file is not created anywhere, but handled in toaster
script code.
(Bitbake rev: 16f3cd3535c9eec71ea7594c1e3a83db00dba7ca)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no point of trying to kill django development server
when toaster starts because 'manage.py checksocket' command is already
used in the script code to check if development server port is occupied.
Even if Toaster is listening on another port, killing previous instance
looks quite implicit and doesn't solve anything as there are other
processes that might be still running.
(Bitbake rev: 0dab45e9815e8939219900264e86f569c714b7c6)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should always shut down tinfoil when we're finished with it, either
by explicitly calling the shutdown() method or by using it as a
context manager ("with ...").
(Bitbake rev: 131e6dc4bbd197774d35d2b266bfb0816f6e6b1e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now you get the bb logger output for failed tests. This helps debugging
problems. Also, all stdout/stderr data for successful tests is silenced
which makes for less cluttered console output.
(Bitbake rev: ea19972a16f7639f944823d1d8a7728105460136)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set this env variable to 'yes' to preserve temporary directories used by
the fetcher tests. Useful for debugging tests.
(Bitbake rev: 04132b261df9def3a0cff14c93c29b26ff906e8b)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This simplifies the script, and, gives new features. It is now possible
to run single test functions, for example. This is nice when writing new
test cases.
(Bitbake rev: 8c513580b9406b031674f799117eae7410f8e01c)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds the notion of supporting multiple configurations within
a single build. To enable it, set a line in local.conf like:
BBMULTICONFIG = "configA configB configC"
This would tell bitbake that before it parses the base configuration,
it should load conf/configA.conf and so on for each different
configuration. These would contain lines like:
MACHINE = "A"
or other variables which can be set which can be built in the same
build directory (or change TMPDIR not to conflict).
One downside I've already discovered is that if we want to inherit this
file right at the start of parsing, the only place you can put the
configurations is in "cwd", since BBPATH isn't constructed until the
layers are parsed and therefore using it as a preconf file isn't
possible unless its located there.
Execution of these targets takes the form "bitbake
multiconfig:configA:core-image-minimal core-image-sato" so similar to
our virtclass approach for native/nativesdk/multilib using BBCLASSEXTEND.
Implementation wise, the implication is that instead of tasks being
uniquely referenced with "recipename/fn:task" it now needs to be
"configuration:recipename:task".
We already started using "virtual" filenames for recipes when we
implemented BBCLASSEXTEND and this patch adds a new prefix to
these, "multiconfig:<configname>:" and hence avoid changes to a large
part of the codebase thanks to this. databuilder has an internal array
of data stores and uses the right one depending on the supplied virtual
filename.
That trick allows us to use the existing parsing code including the
multithreading mostly unchanged as well as most of the cache code.
For recipecache, we end up with a dict of these accessed by
multiconfig (mc). taskdata and runqueue can only cope with one recipecache
so for taskdata, we pass in each recipecache and have it compute the result
and end up with an array of taskdatas. We can only have one runqueue so there
extensive changes there.
This initial implementation has some drawbacks:
a) There are no inter-multi-configuration dependencies as yet
b) There are no sstate optimisations. This means if the build uses the
same object twice in say two different TMPDIRs, it will either load from
an existing sstate cache at the start or build it twice. We can then in
due course look at ways in which it would only build it once and then
reuse it. This will likely need significant changes to the way sstate
currently works to make that possible.
(Bitbake rev: 5287991691578825c847bac2368e9b51c0ede3f0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than passing in a datastore to build on top of, use the data builder
object in the cache and base the parsed recipe from this. This turns
things into proper objects building from one another rather than messy
mixes of static and class functions.
This sets things up so we can support parsing and building multiple
configurations.
(Bitbake rev: fef18b445c0cb6b266cd939b9c78d7cbce38663f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This has been replaced using django's inbuilt loaddata.
Django command documented at:
https://docs.djangoproject.com/en/1.8/ref/django-admin/#django-admin-loaddata
(Bitbake rev: 3edd33aff2b9eef82090dc4f9b5461f901aec8be)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Call django's inbuilt loaddata command to load the appropriate fixtures.
We also attempt to load a fixture called "custom" and fail silently if
we don't have one. This is where initial customisations can be done to
load particular settings or data into Toaster (for example layers or
default values for variables)
Make sure the value for TEMPLATECONF is available to checksettings so
that we can have a go a working out which default data to load.
(Bitbake rev: 7d14ca8cbabbb893e507a66e4cc6e3e77c1e8c84)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user explicitly passes in "--help" then it should return 0. This
is the convention follow by the typical application. This allows the
user to check for options without triggering an error.
(Bitbake rev: 1d5102fe6c932dad1c2b975385e10a33a91ba1a4)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rewritten toaster-eventreplay to make code working as expected,
more compact and readable.
[YOCTO #9585]
(Bitbake rev: 45370a860b24a761d1b6e08ba752079cc45f54da)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
class MockConfigParameters has only one attribute and only __init__
method. Replacing it with namedtuple makes code less nested and more
readable.
[YOCTO #9585]
(Bitbake rev: 5d4df14b0d38f6c89ca16de6dada58b4bb015d71)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Event objects are represented by base64-encoded strings in
the event file and can't be loaded by existing eventreplay code.
Fixed the code of loading events from file by decoding base64 strings
into the binary form and loading them with pickle.load.
[YOCTO #9585]
(Bitbake rev: a55c280c167f84caed6518119246e5a55f56cfd4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stored event mask list as self.eventmask for future use.
Fixed Exception: Command setEventMask not implemented.
[YOCTO #9585]
(Bitbake rev: 2e09074c70e89402de8f883dd402cd729118fc7e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed AttributeError: 'MockConnection' object has no attribute
'getEventHandle'
[YOCTO #9585]
(Bitbake rev: 6deae30480a4288da0c8b3529e61f3495f260f24)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Worker needs input stream in binary mode as it reads binary content
from it. Current code does it by detaching a buffer from sys.stdin
and assigning it back to sys.stdin.
Detached buffer is io.BufferedReader in binary mode. This operation
is implicit as its purpose is not easily understandable from the code.
Replacing it with fdopen(sys.stdin.fileno(), 'rb') should make the
code more understandable.
Assigning the buffer to sys.stdin is not needed as worker doesn't
use sys.stdin. Moreover, it leads to difficult to debug issues down
the stack. For example, devpyshell doesn't work without reopening
sys.stdin in text mode. This is not needed anymore after this fix as
sys.stdin is not changed in worker code and remains in text mode.
(Bitbake rev: b26bcff4c4d72775f1def7e769015464953b955c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Explicitly use python3 so that the modules for python3 are checked.
(Bitbake rev: e7951541c34c5561187110ba0ec69b9c45022747)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Explicitly used python3 as default python for oe builds
will continue to be python2.
[YOCTO #9584]
(Bitbake rev: fde5c962cb69a11b072d1f238c2371a5137d030d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The upgrade to python3 is the final nail in the coffin for image-writer
and the goggle UI. Neither seem used or recieve patches and are based
on old versions of GTK+ so drop them, and the remaining crumbs support
pieces.
(Bitbake rev: ee7df1ca00c76f755057c157c093294efb9078d8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable the problematic gtk usage for use with pygtkcompat. The following
commit removes these tools/UIs entirely but we may as well leave this
piece in the history in case anyone does want a starting point for reusing
them.
(Bitbake rev: c53c7418d392452450352ca2175667dbdbd92401)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Various misc changes to convert bitbake to python3 which don't warrant
separation into separate commits.
(Bitbake rev: d0f904d407f57998419bd9c305ce53e5eaa36b24)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't need to pass the DATABASE_URL around and read it back if we
setup the django framework in the correct way.
We make the default sqlite database path a full path so that the
database isn't being assumed to be in CWD.
Also add some more useful comments on the database settings.
This is preparation work to migrate the build tests and be able to
trigger builds on differently configured databases.
(Bitbake rev: 973c740404ca6a09feea250d3433075995067fe0)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This uses bb.utils.load_plugins, based on the plugin handling in recipetool
and devtool in oe-core.
(Bitbake rev: 5e542df9b966a99b5a5b8aa7cf6100174aff54b2)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used print() function instead of print statement
to make toaster script to work with both python 2 and python 3
[YOCTO #9584]
(Bitbake rev: 09d37ee51219edcd0be6fd24c82fce392533b39b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The logging domain specified to bb.msg.fatal was invalid. Replace with
a logger.critical() call instead.
(Bitbake rev: 1ffd8737e065a3cd634c74cd67e634d785ea93a5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This updates the print "" syntax to print() and fixes some exception
handling syntax such that its compatible with python v2 and v3.
(Bitbake rev: 58304fcce9727fd89564436771356c033ecd22a3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python deprecated logger.warn() in favour of logger.warning(). This is only
used in bitbake code so we may as well just translate everything to avoid
warnings under python 3. Its safe for python 2.7.
(Bitbake rev: 676a5f592e8507e81b8f748d58acfea7572f8796)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the noweb command we don't need to check if a socket is in use or
not as we're not starting the django development server. We're just
setting up the environment and running the runbuilds scheduler.
(Bitbake rev: f62d9a3e86e384f928fc8ad077d7cf3a75d1591e)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow binding to a specified address and port to start the django
development server on.
Remove the assumption that you want to bind to 0.0.0.0 and set the
default to localhost.
Add some additional help text after Toaster webserver has started
(Bitbake rev: ef3c88a57313947feb5ef08c4fea6fd110cde1e7)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add help text for unrecognised or missing command for toaster script
Remove assumption that no command is 'start' as the default.
(Bitbake rev: 4c0b1b9c2af70838dbcf5a676ec679f9f0c488a5)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton
Richard Purdie
Michael Wood
Joshua Lock
Markus Lehtonen
Ed Bartosh
Randy Witt
Christopher Larson