When using `wic create mkefidisk -e core-image-minimal', the following
error message appeared.
Please bake it with 'bitbake parted-native' and try again.
However, following this command doesn't do any help. The same problem
still appeared.
The problem is that when we 'bitbake parted-native', it doesn't have
anything to do with core-image-minimal. And the required tool 'parted'
is not under core-image-minimal's recipe-sysroot-native directory.
Improve the error message so that following it could get things done.
(From OE-Core rev: f0425c0a0f1c98f65bf61fd9aa7e023ed41a35fa)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
FIEMAP API is not supported by tmpfs file system, but
SEEK_HOLE/SEEK_DATA is supported.
Returned back FilemapSeek class that implements support
of SEEK_HOLE/SEEK_DATA API to make sparse_copy API working
on tmpfs again.
This reverts commit 6b80c13f7a.
(From OE-Core rev: e75bd6a7dd5c1b4bad039c35cf4a2ffc2f77c60a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The javascript console log messages are used in scraping, when
converting an html test report to html email. Before this patch a
console message indicating that all charts have been drawn was not
correctly sent if the last test failed (or didn't have chart data for
some other reason) which, in turn, caused oe-build-perf-report-email.py
script to fail with a timeout.
(From OE-Core rev: 79b90ae02257002ea831a48f6798794b7711c1f8)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The initial signatures need to be collected -after- the dependency layers have
been added to the system. Otherwise changes that happen due to dependencies,
outside of the layer being scanned, will show up as signature problems.
The add_layer function was split into two pieces so that we can process
the dependencies first, and then add the layer itself for the comparison.
(From OE-Core rev: 4eb0932e755b7cb582a8db811aeed1397ecb92cc)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When processing a layer for dependencies, you have to process the layer
itself, it's dependencies, the dependencies dependencies and so forth until
all items have been processed.
i.e.: LayerA requires LayerB requires LayerC requires layerD
The end result should be LayerB, LayerC and LayerD are all dependencies of
LayerA.
(From OE-Core rev: 6e0a268b750fb6701604dd936cd2cf3b47a6e804)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
devtool/runqemu.py was relying on STAGING_BINDIR_NATIVE to find the host
tools it needed like qemu-system-<arch>. In the post RSS world, this no
longer exists. This patch points it to
{STAGING_DIR}/{BUILD_ARCH}/{bindir_native}.
[YOCTO #11223]
(From OE-Core rev: 1910f9e9336bfedc8278a3bc02e7e7f934a4fc86)
Signed-off-by: brian avery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Script for sending build perf test reports as an email. Mangles an html
report, generated by oe-build-perf-report, into a format suitable for
html emails. Supports multipart emails where a plaintext alternative can
be included in the same email.
Dependencies required to be installed on the host:
- phantomjs
- optipng
[YOCTO #10931]
(From OE-Core rev: 9e97ff174458f7245fc27a4c407f21a9d2e317ab)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A new tool for pretty-printing build perf test results stored in a Git
repository. The scripts is able to produce either simple plaintext
report showing the difference between two commits, or, an html report
that also displays trendcharts of the test results. The script uses
Jinja2 templates for generating HTML reports so it requires
python3-jinja2 to be installed on the system.
[YOCTO #10931]
(From OE-Core rev: 3b25404f0f99b72f222bdca815929be1cf1cee35)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we do not set the 64 bit flags, newer kernels seem to build 64bit
config files by default. This is due to a hard-coded uname -m check that
selects the KBUILD_DEFCONFIG based on the host, not the cross target.
Similar to e9ec769926b2378e63380bd7762ce7ce201af151 in the yocto-kernel-cache repo
(From meta-yocto rev: e35017cc67f6d3c5cc00488d3460de0dcec773b3)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These parameters are copied from the ext image class.
-D will let fsck perform further directory optimizations
-v might be helpful for debugging purpose
(From OE-Core rev: be93e378506a85772503005294503cfc348a552c)
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is not much sense in creation of empty squashfs
partition. It's also not possible to create empty squashfs
partition of specified size.
Even more, prepare_empty_partition_squashfs method is
absolutely broken. It raises exception when called and
even its signature differs from the rest of of similar
methods. It means that nobody uses it and it's safe
to remove it.
Removed prepare_empty_partition_squashfs method and
testing of empty squashfs partition.
(From OE-Core rev: 9152960f250cb4df1e559d747fb09005675a0d75)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added vfat and msdos to the list of supported fstypes in
'wic help kickstart' output.
[YOCTO #11137]
(From OE-Core rev: ab7f2a77e124d8859002619e7ba3117e8a165df7)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Explicitly set system id 0x6(FAT16) for msdos partitions.
Removed old code that attempts to achieve the same result
using 'parted ... lba off'.
(From OE-Core rev: 230452faf151e277bfb2b49526923f8097755b35)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used '-F 16' parameter for mkdosfs to create FAT16 partitions for
'msdos' partition type.
[YOCTO #11137]
(From OE-Core rev: b6243a03ced9a719a5801afcee014b03313cc43c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added prepare_empty_partition_msdos and prepare_rootfs_msdos
methods to support 'msdos' filesystem type.
Created aliases prepare_empty_partition_vfat and prepare_rootfs_vfat
to continue supporting creation of vfat patitiions.
(From OE-Core rev: f06c507078da72f616f45effe5005cc01615a17c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed wic code that loops through hard-coded list of known fstypes
to find prepare_rootfs_<fstype> or prepare_empty_partition_<fstype>
methods and silently skipping unknown fstypes.
(From OE-Core rev: ebb8fb5f81f473156c9aa4bf1965e538492a851b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Restricted possible values of --fstype to the list of
supported types. This should catch incorrect values
when .wks file is being parsed.
Removed checks for empty fstype and mentioning of
unsupported fstype 'ontrackdm6aux3'.
(From OE-Core rev: 21af89a6d44ccea6aef975ffd2483a8fad1231de)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed unused APIs 'outs' and 'quiet'.
Removed 'catch' parameter from runner.runtool API as wic
uses only one value of it. Removed the code that handles
unused values of 'catch' parameter.
[YOCTO #10618]
(From OE-Core rev: 1e45a4f72b16c7ab64f46907d2d2ee9cd749dc23)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced runner.show call to exec_cmd call in bootimg-pcbios
plugin. Removed runner.show API as it's not used anywhere else.
[YOCTO #10618]
(From OE-Core rev: 9749336c37249af99c92478c3e4dc8821cb9a816)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If bootloader artifacts are not found in default bootimg_dir
use wic-tools sysroot for the same purpose. This should
prevent wic from failing if bootloader artifacts can't be
found in image native sysroot.
(From OE-Core rev: 9674bbd0585fc25ccd362f233b83d07ff8f6ff53)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed fsimage plugin and prepare_rootfs_from_fs_image API as
they duplicate functionality of rawcopy plugin. Fsimage plugin makes
wic to remove the image artifact from deployment directory, which
can cause problems too.
[YOCTO #10618]
(From OE-Core rev: 9a470752f5698f791f8f78e28d163a0b9c695186)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
FIEMAP API was added to Linux kernel 2.6.28 back in 2008
SEEK_HOLE and SEEK_DATA API was added much letter.
As FIEMAP is used by filemap module as a default API it's
safe to remove FileMpSeek class as it's never used.
[YOCTO #10618]
(From OE-Core rev: 44e9406ea6e3263d2fb95e9d534a21f74f318480)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you are using relative paths and change to other folder for
execution it will fail, so use realpaths always.
[YOCTO #11164]
(From OE-Core rev: 14283700f8ec9dcb29cbc00c92d76173f1601bf5)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some layers don't have dependencies so add a validation to avoid
exception when trying to None.split().
(From OE-Core rev: 39103285029a0bb7b64dc5a305c484988b4c651a)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, SRCREV is set to AUTOREV, causing mismatch between PV and the kernel
version shown in the makefile (see below to see the bitbake log). The solution
is to skip this check, suggesting to remove it once SRCREV is locked.
ERROR: linux-yocto-4.10+gitAUTOINC+01f18cba44_53be19cad6-r0.1 do_kernel_version_sanity_check: Package Version (4.10+gitAUTOINC+01f18cba44_53be19cad6) does not match of kernel being built (4.10.5). Please update the PV variable to match the kernel source or set KERNEL_VERSION_SANITY_SKIP="1" in your recipe.
ERROR: linux-yocto-4.10+gitAUTOINC+01f18cba44_53be19cad6-r0.1 do_kernel_version_sanity_check: Function failed: do_kernel_version_sanity_check (log file is located at /home/lsandov1/poky2/build/tmp/work/myqemu-poky-linux/linux-yocto/4.10+gitAUTOINC+01f18cba44_53be19cad6-r0.1/temp/log.do_kernel_version_sanity_check.26904)
ERROR: Logfile of failure stored in: /home/lsandov1/poky2/build/tmp/work/myqemu-poky-linux/linux-yocto/4.10+gitAUTOINC+01f18cba44_53be19cad6-r0.1/temp/log.do_kernel_version_sanity_check.26904
ERROR: Task (/home/lsandov1/poky2/meta/recipes-kernel/linux/linux-yocto_4.10.bb:do_kernel_version_sanity_check) failed with exit code '1
[YOCTO #11064]
(From meta-yocto rev: 79bfd911f826c6c7e26827bb200dd69e6f567b17)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When devtool writes to the kconfig fragment, it writes the output of
the diff command returned from pipe.communicate(). This function
returns binary objects. We should open the kconfig fragment file in
binary mode if we expect to write binary objects to it.
[YOCTO #11171]
(From OE-Core rev: 72bec63ab0e78753fb6ed1794d11beef9485c014)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partition UUID for msdos partitioning is based on a 4 bytes long
system identifier. Wic uses random number to generate system
identifier. For the numbers starting with 0 partition uuid is
shorter, which makes wic images non-bootable as kernel expects
8 charactest in PARTUUID parameter.
Padded system identifier with '0' when generating partition UUID
to make it always 8 characters long. This should fix the boot
issue.
(From OE-Core rev: bdaba95af2b2c9174311374436f184d2a927f6f1)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New set of templates that target the 4.10 kernel version.
[YOCTO #11174]
(From meta-yocto rev: 8a11b0cc2a1bfaab25200c251b301c812141ba58)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed test failure caused by using bootimg_dir path
instead of kernel_dir to find systemd-efi bootloader:
FAIL: test_systemd_bootdisk (oeqa.selftest.wic.Wic)
...
FileNotFoundError: [Errno 2] No such file or directory:
'tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/recipe-sysroot/usr/share'
(From OE-Core rev: 552bd782d9ffe275b8fc7d7cb0b9aaceb51888c3)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used wic-tools STAGING_DATADIR if syslinux can't be found
in default bootimg_dir.
(From OE-Core rev: 79a935cfc86ffce6f4b4f328b90337de36ba6dbb)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed do_install_disk and do_configure_partition methods from
bootimage-partition, fsimage and rawcopy plugins as they're empy
and not used.
[YOCTO #10618]
(From OE-Core rev: d58c8ef2836418056f776a9586e0bb0d33afb788)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sparse_copy creates output file that is smaller than input
file when input file ends with unmapped blocks.
Used truncate(<input file size>) when output file is created
to ensure the size of output file will always be equal to
the size of input file.
(From OE-Core rev: 567186f995302a095a771baede4ff5034d1d1862)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bootimg_dir is usually set to the value of STAGING_DATADIR and
kernel_dir - to the value of DEPLOY_DIR_IMAGE, so usage of
kernel_dir is more logical in bootimg-efi, bootimg-partition and
rawcopy plugins.
Replaced usage of bootimg_dir to kernel_dir in 3 above mentioned
plugins that use DEPLOY_DIR_IMAGE as a default artifact location.
(From OE-Core rev: 48a5d67d7cafdeac821e6f35bea380521ef017d5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changing bootimg_dir in plugins is a dangerous hack as this
value comes from wic command line and can be used by multiple
plugins.
(From OE-Core rev: 2457ea5338f7309316b474562b4723e8cb09286d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If some layer depends on other tries to find layer dependency, if the
layer dependency isn't found avoid to test the layer and notice the
user.
(From OE-Core rev: 1e7cf9bb71521f1632dd2e6b01fe7fcc95732983)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes there is a need to only analyze the layer specified by the
command line, the new option -n will disable autodiscovery of layers
and only will try to test specified layers.
(From OE-Core rev: f2f6f0c938226802163698ef14a8a9103da362a0)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The layers isn't required to have a dirctory name start with meta-
so remove the validation.
(From OE-Core rev: 576c6486f547b1d7422cdd12f688aef74ee632ae)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The meta-world-pkgdata recipe can be modified when a layer is added
may be can add recipes to world target, so exclude by default.
[YOCTO #11162]
(From OE-Core rev: cde30d70b04eb66bff66a351ddf733022e98ddab)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is a good idea to let the script to choose what stream wants
to dump the logging output.
[YOCTO #11160]
(From OE-Core rev: 60c9b06f4085f6bddb6aa397a38bfc2ceb10f964)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch avoids the creation of a corrupt EXT file system.
Since there are no checks if a EXT file system was successfully created,
this should add to prevent possible system failures.
(From OE-Core rev: 95ac3d0637cad7e12f246b8bd64ab64348df0483)
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the tinfoil2 refactoring, if an error occurred during parsing, we
were showing a traceback and not correctly exiting (since we weren't
calling shutdown()). Fix both of these issues.
(From OE-Core rev: 18304036e1b513fd12c049dbf549ba75c503ed84)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't need the gap that the extended partition occupies if we
already know that we have less than five partitions. Saves up to one
full alignment of space.
(From OE-Core rev: 485315dc170e29962a8848db38db73abafd0586e)
Signed-off-by: Kristian Amlie <kristian.amlie@mender.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Web applications built using e.g. angular2, usually requires that the
packages in devDependencies are available.
Thus, add an option '--fetch-dev' to both devtool add and recipetool, to
add npm packages in devDependencies to DEPENDS.
(From OE-Core rev: f246f820d53b459596fde6758a09f7a0d7db7c4c)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When "bitbake -k -S none world" failed, the error printed by
yocto-compat-layer.py contained the stack trace multiple times and did not
contain the stderr output from bitbake, making the error hard to understand
and debug:
INFO: ======================================================================
INFO: ERROR: test_signatures (common.CommonCompatLayer)
INFO: ----------------------------------------------------------------------
INFO: Traceback (most recent call last):
File "/fast/work/poky/scripts/lib/compatlayer/__init__.py", line 144, in get_signatures
stderr=subprocess.PIPE)
File "/usr/lib/python3.4/subprocess.py", line 620, in check_output
raise CalledProcessError(retcode, process.args, output=output)
subprocess.CalledProcessError: Command 'bitbake -k -S none world' returned non-zero exit status 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/fast/work/poky/scripts/lib/compatlayer/cases/common.py", line 51, in test_signatures
curr_sigs = get_signatures(self.td['builddir'], failsafe=True)
File "/fast/work/poky/scripts/lib/compatlayer/__init__.py", line 149, in get_signatures
raise RuntimeError(msg)
RuntimeError: Traceback (most recent call last):
File "/fast/work/poky/scripts/lib/compatlayer/__init__.py", line 144, in get_signatures
stderr=subprocess.PIPE)
File "/usr/lib/python3.4/subprocess.py", line 620, in check_output
raise CalledProcessError(retcode, process.args, output=output)
subprocess.CalledProcessError: Command 'bitbake -k -S none world' returned non-zero exit status 1
Loading cache...done.
Loaded 1328 entries from dependency cache.
NOTE: Resolving any missing task queue dependencies
NOTE: Runtime target 'zlib-qat' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['zlib-qat']
...
Summary: There were 5 ERROR messages shown, returning a non-zero exit code.
The yocto-compat-layer.log was incomplete, it only had the first part
without the command output.
stderr was missing due to stderr=subprocess.PIPE.
Instead of the complicated try/except construct it's better to check
the return code ourselves and raise just a single exception. The
output (both on stderr and in the yocto-compat-layer.log) now is:
INFO: ======================================================================
INFO: ERROR: test_signatures (common.CommonCompatLayer)
INFO: ----------------------------------------------------------------------
INFO: Traceback (most recent call last):
File "/fast/work/poky/scripts/lib/compatlayer/cases/common.py", line 51, in test_signatures
curr_sigs = get_signatures(self.td['builddir'], failsafe=True)
File "/fast/work/poky/scripts/lib/compatlayer/__init__.py", line 147, in get_signatures
raise RuntimeError(msg)
RuntimeError: Generating signatures failed. This might be due to some parse error and/or general layer incompatibilities.
Command: bitbake -k -S none world
Output:
Loading cache...done.
Loaded 1328 entries from dependency cache.
NOTE: Resolving any missing task queue dependencies
ERROR: Nothing PROVIDES 'qat16' (but /fast/work/meta-intel/common/recipes-extended/openssl-qat/openssl-qat_0.4.9-009.bb DEPENDS on or otherwise requires it)
ERROR: qat16 was skipped: incompatible with machine qemux86 (not in COMPATIBLE_MACHINE)
...
Missing or unbuildable dependency chain was: ['openssl-qat-dev']
...
Summary: There were 5 ERROR messages shown, returning a non-zero exit code.
(From OE-Core rev: 5b9ac62ab535d2791b9713857e1016f49f53dd8d)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we are both having a bootloader and a U-Boot environment file, we
can end up with two entries using "--source rawcopy" and "--no-table",
and since they reuse the same file [1], their cleanup handlers will
try to delete the same file twice. So make sure we only do it once.
[1] Although they reuse the same file, the resulting output is
correct, so it appears the file is accessed in properly sequential
order.
(From OE-Core rev: f1a3eac376c4600cdb128d870ad9b7e9d51ed9c0)
Signed-off-by: Kristian Amlie <kristian.amlie@mender.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patches removes the empty space in front of the copied file which
was skipped. Without this reduction it's not possible to place a
partition with rawcopy and skip parameter on a desired alignment.
(From OE-Core rev: 5c024d71f9413b81ee1707dbc41f0721f8f27bdb)
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without the int() function this variable will be a string. This will led
to a error in Filemap on line 545 due wrong types.
> [...]
> File
> ".../poky/scripts/lib/wic/filemap.py", line 545, in sparse_copy
> if start < skip < end:
> TypeError: unorderable types: int() < str()
(From OE-Core rev: 46b5814bcdc0e7e3cb293e877e2aa949baf5fef8)
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The yocto-compat-layer script serves as a tool to validate the alignament
of a layer with YP Compatible Layers Programme [1], is based on an RFC
sent to the ML to enable automatic testing of layers [2] that wants to
be YP Compatible.
The tool takes an layer (or set of layers) via command line option -l
and detects what kind of layer is distro, machine or software and then
executes a set of tests against the layer in order to validate the
compatibility.
The tests currently implemented are:
common.test_readme: Test if a README file exists in the layer and isn't
empty.
common.test_parse: Test for execute bitbake -p without errors.
common.test_show_environment: Test for execute bitbake -e without errors.
common.test_signatures: Test executed in BSP and DISTRO layers to review
doesn't comes with recipes that changes the signatures.
bsp.test_bsp_defines_machines: Test if a BSP layers has machines
configurations.
bsp.test_bsp_no_set_machine: Test the BSP layer to doesn't set
machine at adding layer.
distro.test_distro_defines_distros: Test if a DISTRO layers has distro
configurations.
distro.test_distro_no_set_distro: Test the DISTRO layer to doesn't set
distro at adding layer.
Example of usage:
$ source oe-init-build-env
$ yocto-compat-layer.py LAYER_DIR
[YOCTO #10596]
[1] https://www.yoctoproject.org/webform/yocto-project-compatible-registration
[2] https://lists.yoctoproject.org/pipermail/yocto-ab/2016-October/001801.html
(From OE-Core rev: e14596ac33329bc61fe38a6582fa91f76ff5b147)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rewrite Public Domain as PD, as that's what the place holder in
meta/files/common_licenses is called.
(From OE-Core rev: d7f0af5aa90a9ef7714c842fb4cb762017820768)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi
Ed Bartosh
Markus Lehtonen
Mark Hatle
brian avery
Saul Wold
Daniel Schultz
Aníbal Limón
Leonardo Sandoval
Stephano Cetola
Paul Eggleton
Kristian Amlie
Anders Darander
Patrick Ohly