[
NUC6 (Skylake) graphics firmware fails to load without this patch.
From: Mat Martineau <mathew.j.martineau@linux.intel.com>
commit a41c8882592fb80458959b10e37632ce030b68ca upstream.
The driver does not load firmware for unknown steppings, so these new
steppings must be added to the list.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1454023163-25469-1-git-send-email-mathew.j.martineau@linux.intel.com
]
(From OE-Core rev: 754350eb937c38e1cbd2dd3de26cc93d61d01328)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following mainline changes:
afaf425e796c pwm: Add the pwm_is_enabled() helper
023721c3d067 pwm: atmel: Fix incorrect CDTY value after disabling
cd9fe8adb313 pwm: atmel: Fix incorrect CDTY value after enabling
3f445ca6df1f pwm: lpss: Rework the sequence of programming PWM_SW_UPDATE
9a51f622bdc9 pwm: lpss: Select core part automatically
8ee11b6f80ba pwm: lpss: Update PWM setting for Broxton
148228a52c2d pwm: lpss: Remove ->free() callback
e20d95bcd0b3 pwm: lpss: Add support for runtime PM
b2248acf6f8b pwm: lpss: Add more Intel Broxton IDs
85e8566bd241 pwm: lpss: Support all four PWMs on Intel Broxton
1bcdcb6275bf pwm: lpss: Add support for multiple PWMs
(From OE-Core rev: e721858657b8641fda94f84866c37668580bd7a9)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting the following commits:
2b0cc0f0ca23 mmc: It is not an error for the card to be removed while suspended
67903c1f4c77 mmc: sdhci: 64-bit DMA actually has 4-byte alignment
4e434f483381 mmc: sdhci: Do not BUG on invalid vdd
05be442eb234 mmc: mmc: Fix incorrect use of driver strength switching HS200 and HS400
97a5f396dca6 mmc: core: Make runtime resume default behavior for MMC/SD
b6ee1ac07f14 mmc: mmc: Improve reliability of mmc_select_hs400()
45de48ce0b3c mmc: mmc: Move mmc_switch_status()
9d6aaaa0f6b7 mmc: mmc: Fix HS setting in mmc_select_hs400()
d7795de930c5 mmc: mmc: Improve reliability of mmc_select_hs200()
ac98e33a088d mmc: sdhci-acpi: Add more ACPI HIDs for Intel controllers
87f52cce8123 mmc: sdhci-pci: Add more PCI IDs for Intel controllers
cf3a4d2d4c7d mmc: sdhci-pci: Add another PCI ID for an Intel eMMC host controller
b3ef45585504 mmc: sdhci-pci: Build o2micro support in the same module
b32a4e71f49d mmc: sdhci: enable tuning for DDR50
f8e213bee1e1 mmc: sdhci: call sdhci_init() before request irq
ece0925eb94e mmc: sdhci-pci: Enable HS400 for some Intel host controllers
1c01bcdceaf6 mmc: sdhci-pci: Add support for drive strength selection for SPT
c1d6e92915a9 mmc: sdhci: Add a callback to select drive strength
40deb3ac3331 mmc: mmc: Add driver strength selection
e7d602f5992f mmc: mmc: Read card's valid driver strength mask
bc193a886571 mmc: core: Record card drive strength
a548d3993cc8 mmc: core: Factor out common code in drive strength selection
6713f5cf3164 mmc: core: Add 'card' to drive strength selection callback
852e6bd69b77 mmc: core: Simplify card drive strength mask
0bb40266bbb9 mmc: core: Allow card drive strength to be different to host
940d30f1a212 mmc: core: Reset driver type to default
efbc6ba8cd27 mmc: cast u8 to unsigned long long to avoid unexpected error
bafe0e5beba9 mmc: core: Don't print reset warning if reset is not supported
5b2789151852 mmc: block: Retry errored data requests when re-tuning is needed
d14211a4b2fe mmc: block: Check re-tuning in the recovery path
1ff15c648159 mmc: core: Flag re-tuning is needed on CRC errors
12544ee1cdbb mmc: sdhci: Change to new way of doing re-tuning
995073b182f7 mmc: core: Add support for HS400 re-tuning
53a0d731e824 mmc: core: Separate out the mmc_switch status check so it can be re-used
d3f59f108bf7 mmc: mmc: Hold re-tuning in mmc_sleep()
465db9504a27 mmc: core: Hold re-tuning while bkops ongoing
60cacf85ee10 mmc: core: Hold re-tuning during erase commands
5bd43535f4c1 mmc: core: Hold re-tuning during switch commands
4baa45ff8d15 mmc: core: Add support for re-tuning before each request
cd2ca27f9282 mmc: core: Enable / disable re-tuning
65723236b746 mmc: host: Add facility to support re-tuning
(From OE-Core rev: 934fd9d7310ffc72e206f48590a0f10ba0a78e1b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To enable Apollo Lake/Broxton, we backport the following changes:
da451824f75f i2c: designware: Convert to use unified device property API
58b1b5365f4a i2c: designware: Do not require clock when SSCN and FFCN are provided
8995091cfa0f i2c: designware: retry transfer on transient failure
1fc62907f84e i2c: designware: Move common probe code into i2c_dw_probe()
678110c0f2b8 i2c: designware: Rename platform driver probe and PM functions
c51c2e104d40 i2c: designware: Make dw_readl() and dw_writel() static
98d2b6e244ad i2c: designware: Remove unused functions
3d04c6e99652 i2c: designware: Disable interrupts before requesting PCI device interrupt
fb5b7be0fbe7 i2c: designware: Remove interrupt clearing from i2c_dw_pci_probe()
d48fd08b11c8 i2c: designware: Make debug print in i2c_dw_isr() shorter
28f94bc07450 i2c: designware-pci: use IRQF_COND_SUSPEND flag 95f494846fc1 i2c: designware: Avoid unnecessary resuming during system suspend
fb2ae3705a3a i2c: dw: Add APM X-Gene ACPI I2C device support
516a0fc91e00 i2c: designware: Add support for AMD Seattle I2C
874d63b3c95c i2c: designware: fix IO timeout issue for AMD controller
47543e80c6dd i2c: designware: reverts "i2c: designware: Add support for AMD I2C controller"
076fe383c4b5 i2c: designware: use to_pci_dev()
(From OE-Core rev: 7b4b8a2481ce256e35fb86ebdeb944ee29ad5231)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following 4.4 backports:
630b726098c9 mfd: make mfd_remove_devices() iterate in reverse order
aab24907568b driver core: Do not overwrite secondary fwnode with NULL if it is set
89775462ef50 device property: return -EINVAL when property isn't found in ACPI
a9eebae4a2c0 device property: check fwnode type in to_of_node()
(From OE-Core rev: 4dd3bd968042d943f279d91d220abc61ebd574a5)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was requested that CONFIG_COMPAT be enabled for qemuarm64 so that
32bit applications could be tested. This is simple enough to do, so
there is now a 32bit compat feature, and it is included only in
qemuarm64 to avoid impacting any other ARM targets (but the feature
is available for others to use).
[YOCTO #8646]
(From OE-Core rev: 26488894a2fdea0e0b003ff060b5a88ec6625a5f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the modern license handling code, gnutls and libtasn1 are both
buildable in distros which blacklist GPL-3.0 without needing to be
explicitly whitelisted (since they both provide at least one non
GPLv3 package).
(From OE-Core rev: 0a42e49bdcbc2f1f63b9d3fda9d4bc0f87a8eb01)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the sanity code encounters a version change is doesn't understand, the current
output is unreadable and confusing for the user, particularly due to the presence
of the backtrace.
Use improved functionality in bitbake to improve this and correctly pass python
exceptions around.
[YOCTO #9291]
(From OE-Core rev: a0860e308645f17dbf4b9005b2fc0e9869d730bf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is for the improved exec_func functionality.
(From OE-Core rev: aedef9d6a585db9c1289f6117e72bdb576a1a304)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are various concerns about md5 so use sha256 instead.
(From OE-Core rev: a88603cb2ffd4f995e16349a389902eb884252e5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's very possible that we added layer as:
BBLAYERS += "/path/to/meta/"
then there would be warning:
WARNING: No bb files matched BBFILE_PATTERN_core '^/path/to/meta//'
This patch can fix the problem.
(Bitbake rev: 2b1cb21d18fb18399e682021b866babeced9a4aa)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the code as it stands today it not possible to execute a python function
and get "normal" python exception handling behaviour. If a python function
raises an exception, it forces a traceback to be printed and the exception
becomes a FuncFailed exception.
This adds in a parameter 'pythonexception' which allows standard python
exceptions to be passed unchanged with no traceback. Ultimately we may want
to change to this convention in various places but at least it means we can
start to add sane functions now.
(Bitbake rev: 85cf22fd0ed26bb7dc7738ef2a10441891f38ae2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are some codepaths where the file checksum is verified and can
be found to mismatch but the 'rename' logic doesn't kick in. If code
relies on the presence of a file for the checksum having been checked
(e.g. uninative.bbclass) then it can be used when the checksum hasn't
matched.
Therefore rename the file whenever an invalid checksum is encountered.
(Bitbake rev: 69ef6c8a9db02bfa0e3fac72481ec26586a29a01)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Prevent a hang when shutdown() is called during parsing (e.g. after
SIGINT). We must not append 'None' to the jobs queue. Otherwise the
worker loop inside Parser.realrun() may break out at the wrong point,
causing the results queue thread blocking bitbake indefinitely.
[YOCTO #9319]
(Bitbake rev: 7ebea3e9a60232222efa8a546a0ff28a53029949)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now we have mips64 port of musl and there is
a name for ldso, backport the fix from upstream
gcc master
(From OE-Core rev: fd37da3a559e0c494c7481849746ec12d492a7b2)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a do_deploy_archives_setscene, but no addtask.
(From OE-Core rev: 81db27c208468dc460e9d8f0063ad24b2b37dc97)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently bbappend files in a layer are applied in the order they're
found on disk (as reported by glob) which means things are not
deterministic.
By sorting the glob results, the order becomes deterministic, the parsing
order for .bb files also should be deterministic as a result of this change.
[YOCTO #9138]
(Bitbake rev: 3f8febc4212fbd3485ac9bdd4ac71b8fb0a05693)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before this patch, directory symlinks mathcing filename pattern (either
a file name or a glob pattern) were followed. However, directory
symlinks deeper in the search chain were omitted by os.walk(). Now
directory traversal behaves consistently, ignoring syminks on all
levels.
One reason for choosing not to "walk into" directory symlinks is that
dir symlinks in externalsrc.bbclass in oe-core are causing problems in
source tree checksumming.
[YOCTO #8853]
(Bitbake rev: 66dff37ebcd1dd14ebd6933d727df9cf0a641866)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For relative path in DWARF, -fdebug-prefix-map could not remap it,
so translate to real path before mapping.
[YOCTO #9305]
(From OE-Core rev: e50d23c30cd8259941b25e336b11cd96e4f6cd31)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since ptest-runner is a Yocto Project tool is better to have hosted
into git.yoctoproject.org.
(From OE-Core rev: 2fa1e9b3ebf3abb2b0b49ba1404e4f18483695d9)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Makefile for man has a rule to create two generated targets with
a program run from the shell. Because the rule was run twice, with
parallel make, the generated files were being overwritten at the same
time they were being compiled. This patch forces the rule to be run
only once.
[YOCTO #9333]
(From OE-Core rev: 61f3ef6a209805577c0e731a73c4f0eab1ace748)
Signed-off-by: Bill Randle <william.c.randle@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BitBake should append to recipe in a predictable order.
fix for [YOCTO #9145]
test for [YOCTO #9138]
(From OE-Core rev: 51bef86ce52fdc2455cd1879e3e19d5ccc5c1c9c)
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If local.conf contains an invalid line, e.g.:
APPEND += " igor"
(note the leading space) then nasty tracebacks are shown which confuse the
user. Change so the parse error is simply shown without a traceback, improving
the user experience.
[YOCTO #9332]
(Bitbake rev: 148aa1fb45dcb37a756a08301a7daf270e753180)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were trying to inject cached configure variables via
EXTRA_OECONF, but that was not working due to the fact
that gcc configure is called recursively via makefiles
and hence these were getting lost.
These backports from master fixes the problem by
defining the options in configure itself
dl_iterate_phdr is provided by musl as well, so lets
not depend on glibc defines like inhibit_libc alone
(From OE-Core rev: b3f80743cd1b9a15a8ee4d20c2a54c2f6cbcd13c)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found that ssize_t was being wrongly computed for mips64 musl
because it was using wrong cache files.
alias them to glibc versions, musl doesn't _yet_ have target
incompatibilities to note in siteinfo thankfully.
Add musl aliases for aarch64 and ppc64 targets
(From OE-Core rev: d3867743e7028046454dc135efeefadfa382f463)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rich Felker (2):
fix padding string formats to width in wide printf variants
fix outdated pathnames in COPYRIGHT file
Szabolcs Nagy (7):
deduplicate bits/mman.h
mips64: add recent linux syscall numbers
add copy_file_range syscall numbers from linux v4.5
add IPV6_HDRINCL socket option from linux v4.5
add SO_ATTACH_REUSEPORT_[CE]BPF socket options from linux v4.5
add EPOLLEXCLUSIVE epoll flag from linux v4.5
add MADV_FREE madvise command from linux v4.5
Timo Teräs (1):
fix gethostbyaddr_r to fill struct hostent.h_length as appropriate
updated paths in copyright text
see http://git.musl-libc.org/cgit/musl/commit/?id=dc4520d9c0b79bc5944f509e4e9061e5081e38ca
(From OE-Core rev: 2fe87b495c0529b87dd46905e048549235f543e0)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
buildhistory_get_imageinfo() assumed that the buildhistory directory
for the image had already been created earlier. That assumption is not
true for special images (like the virtual swupd images from
meta-swupd) where the entire traditional do_rootfs/do_image is
skipped.
Creating files-in-image.txt still makes sense for such images, so
support them by creating the directory also in
buildhistory_get_imageinfo().
(From OE-Core rev: 723328319ee53235969ec9cce7ff5d7729dcf8d7)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It should be the similar type as hddimg, rather than ext234 or btrfs.
(From OE-Core rev: d5ddc5ec1628c94bd5edc45bc821da1ce616e80f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* The name changes from overlayfs to overlayo
* The workdir is a must when mount
* The updir must be a subdir of rootfs.rw
This patch plus with another one which has been sent to linux-yocto can
fix the error when boot iso:
EXT4-fs (loop0): re-mounted. Opts: data=ordered
Populating dev cache
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
/etc/rcS.d/S36udev-cache: line 73: can't create /etc/udev-cache.tar.gz:
Read-only file system
udev-cache: update failed!
rm: can't remove '/etc/udev/cache.data': Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
rm: can't remove '/tmp': Read-only file system
ln: /tmp/tmp: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
ln: /etc/resolv.conf: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
(From OE-Core rev: ba918e0e36418ec6e14aef537ff4fdf45af6d8d4)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The '/' in the end is not needed, which caused '//' in the path.
(From OE-Core rev: 6b0fc87ced857763ae7e9d1012fb9f5c952c2cc8)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, do_package_write_rpm doesn't depend on rpm-native which
it really should since that is needed to build rpms.
[YOCTO #8047]
(From OE-Core rev: 3fab4f9920d004fe13fb01434d4c7f3b8bbd7895)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Most of wic functionality doesn't depend on .wicenv file,
so it's better to generate it only in test_image_env
test case where it's used.
(From OE-Core rev: caf9b41e1db7b565ef977200195d57b385127de9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Explicitly set all permissions.
This fixes various problems such as:
Unable to create '/home/builder/poky/bitbake/lib/bb/pysh/pyshtables.py'
[Errno 22] invalid mode ('w') or filename '/home/builder/poky/bitbake/lib/bb/pysh/pyshtables.py'
and failure to create sub-directories in the directory 'poky':
mkdir: cannot create directory '<dir>': Invalid argument
While in there, added a few non-functional changes:
Added sample proxy settings into .bashrc
Added environmental variable with SRCREV actually used to populate the Build
Appliance into .bashrc (BA_SRCREV)
[YOCTO#9314]
(From OE-Core rev: fcc558874d1ea533fb6ca488d2ab2223c1e21881)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When prefix is part of the version directory it need to ensure that
only version directory is used so remove previous directories if exists.
Example: pfx = '/dir1/dir2/v' and version = '2.5' the expected result
is 'v2.5' instead of '/dir1/dir2/v2.5'.
[YOCTO #8778]
(Bitbake rev: c760531c6dbf88135ab9f8e6f0784ccbf2cce1e4)
Signed-off-by: Aníbal Limón <limon.anibal@gmail.com>
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Little improvement for reference tokens by names instead of index.
(Bitbake rev: e8ea15eeb1857ed4bb6337836bd2fb1f5dbb1bdf)
Signed-off-by: Aníbal Limón <limon.anibal@gmail.com>
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tweak DEBUG_FLAGS to use "/usr/src/debug/${PN}/${EXTENDPE}${PV}-${PR}"
as source target path in DWARF. While use gdb to debug binary, it could
work with sources in dbg package.
While -fdebug-prefix-map is used for compiling, we do not need invoking
debugedit to edit DWARF at do_package time, but list where sources files
are.
The copydebugsources uses the list to copy sources to dbg package. It
works whether -fdebug-prefix-map used or not.
[YOCTO #9305]
(From OE-Core rev: ecb56a6ae0c870af680da03db9d39703b525fc98)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Extend the srctree_hash_files() function in externalsrc.bbclass to
handle non-Git source trees. If the source tree is not a git
repository, srctree_hash_files() now simply adds the whole source tree
as a dependency, causing bitbake to basically hash every file in it.
Hidden files and directories in the source tree root are ignored by the
glob currently used. This has the advantage of automatically ignoring
.git directory, for example.
During the first bitbake run preparing of the task runqueue may take
much longer if the source tree is not a git repository. The reason is
that all the files in the source tree are hashed. Subsequent builds are
not significantly slower because (most) file hashes are found from the
cache.
[YOCTO #8853]
(From OE-Core rev: a797abe08bfe4144e120c984d1718c2cc3d87c0a)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Be a bit more intelligent than mindlessly re-compiling every time.
Instead of always using 'nostamp' flag for do_compile run a python
function to get a list of files to add as 'file-checksums' flag. The
intention is to only re-run do_compile if something in the source tree
content changes.
This python function, srctree_hash_files(), works differently, depending
if the source tree is a git repository clone or not. If the source tree
is a git repository, the function runs 'git add .' and 'git write tree'
to get a hash of the working tree and writes this hash into a file under
the .git directory. This file containing the hash is then returned as
the file for the task to depend on. Hash is changed if any changes are
made in the source tree causing the task to be re-run. A trick is used
to parse the recipe every time so that the hash file gets updated.
If the source tree is not a git repository behaviour remains the same.
In this case srctree_hash_files() currently sets the 'nostamp' flag for
do_compile causing it to be re-run every time.
This method of tracking changes source tree changes to determine if
re-build is needed does not work perofectly, though. Many packages are
built under ${S} which effectively changes the source tree causing some
unwanted re-compilations. However, if do_compile of the recipe does not
produce new/different artefacts on every run (as commonly is and should
be the case) the re-compilation loop stops. Thus, you should usually see
only one re-compilation (if any) after which the source tree is
"stabilized" and no more re-compilations happen.
[YOCTO #8853]
(From OE-Core rev: a26becdf981b35d7ef8524f9e65c25a74b842f1d)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is pointless to archive several times the gcc source.
This change will archive gcc source once, for the gcc-source-{PV}
recipe.
[YOCTO #9327]
(From OE-Core rev: 2f53fb2ae561e2eb599682ba95ce83ad1b4b7ada)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The algorithm was sub-optimal so replace it with something more elegant.
(From OE-Core rev: 6119a90173f9222efa6df25aacf873af85d64bcd)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes the problem by changing the name to the coverage data file,
using the timestamp as an identifier.
The name for the coverage data file is constructed based on the tests
ran; this has created a couple of issues so far, affecting coverage report.
If --run-tests-by option is given, the data file name won't have any
identifier, causing following runs to overwrite themselves. On the
other hand, if too many tests are given, the file name exceeds linux
limits and fails to store the coverage data all together.
[Yocto #9253]
(From OE-Core rev: 7c0c9d1411e04935675f4c4be8768723c1d09b50)
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Incorporates the patches we were carrying, and adds some icon names that were
not handled.
(From OE-Core rev: 8ec6e1f57cb4d0594b96d317e89851630c984087)
(From OE-Core rev: 43d8006c51b09ce4b158965a73433101186929f4)
(From OE-Core rev: ae81abb3f5ec247114f7ba904d0b31fad5b16599)
Signed-off-by: Johannes Pointner <johannes.pointner@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Define _ABIO32 if not already defined
heps in fixing gdb for mips64
(From OE-Core rev: 512d976585086028f22ea88218a2bbf900062588)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield
Andre McCurdy
Richard Purdie
Robert Yang
Markus Lehtonen
Khem Raj
Hongxu Jia
Aníbal Limón
Bill Randle
Daniel Istrate
Patrick Ohly
Martin Jansa
Ed Bartosh
Juro Bystricky
Aníbal Limón
Mariano Lopez
Ross Burton
Humberto Ibarra
Johannes Pointner