oe-core removed the prerequisite to have sh as bash. POSIX doesn't define
any options and furthermore allows 'echo -e' to be the default behavior.
This means that in dash 'echo -e' will actually print '-e' and interpret
backslashes by default. We use instead 'printf' builtin command with or
without '\n' to simulate 'echo -e' or 'echo -n'.
'printf' needs format while 'echo' can be used without any arguments. So
'echo >' was replaced by 'printf "" >'.
'echo' without '-n' flag adds a new line by default so to keep the same
behavior of two new lines while using 'echo "\n"', 'printf "\n\n"' is
used.
[YOCTO #3138]
(From OE-Core rev: a19880ad10ccb5d7d909dcf9de5c3dc58a0ebcd3)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When called with the complementary install option, the first step is to
backup the install manifest so that we can avoid installing items previously
installed. However, this backup process skipped the initial_install portion
of the manifest, causing early install items like libc6, bash, and base-files
to be installed a second time.
Fix this by cating the files to original_solution. This is done as an append to
allow multiple calls to package_install_internal_rpm to work.
(From OE-Core rev: af9fd7566a5de4716a202922f5eabb13a412f2fb)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Check ${target_rootfs}/etc/passwd rather than
${target_rootfs}${rpmlibdir} to make sure that it has been previously
installed.
* Remove the "--nodeps" when incremental image generation, it should
take care of the dependencies. Still use "--replacefiles --replacepkgs" in
case there are conflicts.
[YOCTO #3047]
(From OE-Core rev: 2b3df2ec7979a49842df172be442a8794fe68fff)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
rpm can't use the "-" as the arch, which causes problem, e.g., when
MACHINE = "beagleboard":
* The arch should be armv7a-vfp-neon, but rpm only takes the armv7a,
this is incorrect since it is mixed with real arch armv7a.
* The nativesdk's arch should be i686-nativesdk (or x86_64-nativesdk),
but rpm only takes the i686 (or x86_64), this in incorrect since it is
mixed with the arch i686 (or x86_64).
Replace "-" with "_" when rpm package and the rootfs generation would
fix the problem, I think this is fine since it doesn't change the tune's
arch, the package manager doesn't care about the arch's name, but it
needs a unify arch system to avoid confusing. This is similar to what we
have done on the deb which fixed the arch i486, i586 and so on to i386.
[YOCTO #2328]
(From OE-Core rev: fc985f511da86400e4fa7d17555216c12eb51666)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As discussed on the mailing lists, using a suffix to package names is
hard and has lead to many recipes having to do PKGSUFFIX games. Its
looking extremely hard to scale nativesdk much further without hacking
many recipes.
By comparison, using a prefix like multilib does works much better and
doesn't involve "hacking" as many recipes. This change converts nativesdk
to use a prefix using the existing multilib infrastructure.
(From OE-Core rev: 81813c0e322dc04ce4b069117188d8a54dfddb8c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* The "tar-package" is used for saving the "Source" list for rpmbuild,
there is no such a file when "ARCHIVER_MODE[type] ?= srpm", and there
would be errors, it hadn't happen before was becuase that the remove
function didn't work. Let the "rpmbuild --rmsource" to remove the
Sources, and the remove function will just remove the tar-package file.
* Remove several unwanted "try ... exception" sentences, let the error
raise rather than ignore them when the error happens.
* Remove several un-needed code.
[YOCTO #2619]
(From OE-Core rev: 6ac3e8be0307ecaea5e92f8bda94f1cd2193a47a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The configuration value from the conf file is lower case, e.g. srpm,
tar, so there is no reason to use the upper case which makes things
complicated.
[YOCTO #2619]
(From OE-Core rev: 036a2502689092bb278b929f6e8ef2a119c1cf35)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Fix the fakeroot issue
The archiver.bbclass is used for archiving sources, patches, and logs,
it uses the "rpmbuild -bs" from the package_rpm.bbclass to generate the
.src.rpm, but it didn't work (it's not easy to explain it clearly):
Reason:
- It directly used the "fakeroot" command, we don't have such a
command in native tools, so it would use the fakeroot from the host,
and it would fail when there is no fakeroot on the host.
- The "rpmbuild -bs" doesn't need to work under root, but it is in the
function do_package_write_rpm which is running under fakeroot, and
"rpmbuild" needs to know the source file's user/group name, the source
file is the tarball which is created by the postfuncs of do_unpack
or do_patch which doesn't use the fakeroot, so the created file's
owner would be the real user, e.g.: robert, but there is no such a
user under our native tools' fakeroot(pseudo), then the rpmbuild would
fail. It worked when use the host's fakeroot in the past was because
that the host's fakeroot knows the users on the host.
Fix:
- Remove the incorrect "fakeroot".
- Change the source file's owner to root.root under fakeroot will fix the
problem.
* Other fixes:
- The typo: "do_remove_taball -> do_remove_tarball" which will cause the
tarball is not removed.
- Add the _sourcedir defination to the rpmbuild command since the the
SOURCES would be added to the specfile when archiver.bbclass is
inherited, otherwise there would be errors when "rpmbuild -bb", though
the build is OK. It only added the defination to "rpmbuild -bs",
didn't add to "rpmbuild -bb".
[YOCTO #2619]
(From OE-Core rev: ac152f277fdff256def01af4268215a05685a0f7)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several fixes:
* It uses mixed tab and whitespace as the indent in one function,
Fix them to use "4 spaces" as the indent.
* Remove the unwanted blank, for example, more than one blank lines
appeared together.
* Remove the tail whitespace.
[YOCTO #2619]
(From OE-Core rev: 5eacbcdf306d9e743164a1563559cd24eb5fffe0)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The incremental rpm generation usually broke when package_rpm.bbclass
changed, change its implementation to make it more stable:
* It depended on the previous and current saved manifest files in
the past, it would break when the manifest changed. Now query the
previous and current installed pkgs from rootfs/var/lib and
rootfs/install/, this would be more reliable, the manifest's change
would not affect it any more.
* Add explanations before package_install_internal_rpm to explain what
does the function do.
* Remove an unwanted "awk '{print $1}'".
[YOCTO #2906]
(From OE-Core rev: 5d8ca498e09438bd91654fa8b8b2c970956d88e3)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was pointed out we have a number of weird indentations in the python functions.
This patch cleans up 3, 7 and other weird indentations for the core bbclass files.
It also fixes some wierd (odd) shell function indentation which my searches picked up.
(From OE-Core rev: 8385d6d74624000d68814f4e3266d47bc8885942)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During an attemptonly install, if you try to install two packages that
conflict with each other, a message is generated:
error: Failed dependencies:
dropbear conflicts with openssh-6.0p1-r4.ppc603e
dropbear conflicts with openssh-sshd-6.0p1-r4.ppc603e
This is placed onto stderr (vs stdout), which was not being redirected.
This allowed the log-check code to find the magic key of "Failed" causing
the package installation process to fail. Instead the proper behavior is to
simply ignore the error and proceed with the install.
(From OE-Core rev: 16d8d7fdda4ae7d108f5d50cde3f6104e231bd23)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rename rpmresolve's -d option to -t and make -d enable debug output;
add a -o option to specify the output file (so rpm debug output doesn't
go to the output file) and also add a little more detail to some of the
error messages.
(From OE-Core rev: 163dd734d79fd7040b48b10bca6fde28460ac20c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
we were assigning local variable to an array coming through
positional arguments. local is a non posix contruct thats
also supported by dash luckily but operates differently in this
case it exapnds the array before assignment. so
local pkgs="$@"
turns into pkgs=locale-base-en-us locale-base-en-gb
ant we see errors
run.do_rootfs.25593: 932: local: locale-base-en-gb: bad variable name
So lets not use defining and assigning local in one go
first define a local and then the assignment
(From OE-Core rev: 4029ce1a15e1dbd374444ee77ccf2a915e463b7b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use a similar mechanism that was previously used to install locales at
rootfs generation time to install other "complementary" packages (e.g.
*-dev packages) - i.e. install all of the explicitly requested packages
and their dependencies, then get a list of the packages that were
installed, and use that list to install the complementary packages. This
has been implemented by using a list of globs which should make it
easier to extend in future.
The previous locale package installation code assumed that the locale
packages did not have any dependencies that were not already installed;
now that we are installing non-locale packages this is no longer
correct. In practice only the rpm backend actually made use of this
assumption, so it needed to be changed to call into the existing package
backend code to do the complementary package installation rather than
calling rpm directly.
This fixes the doc-pkgs IMAGE_FEATURES feature to work correctly, and
also ensures that all dev/dbg packages get installed for
dev-pkgs/dbg-pkgs respectively even if the dependency chains between
those packages was not ensuring that already.
The code has also been adapted to work correctly with the new
SDK-from-image functionality. To that end, an SDKIMAGE_FEATURES variable
has been added to allow specifying what extra image features should go
into the SDK (extra, because by virtue of installing all of the packages
in the image into the target part of the SDK, we already include all of
IMAGE_FEATURES) with a default value of "dev-pkgs dbg-pkgs".
Fixes [YOCTO #2614].
(From OE-Core rev: 72d1048a8381fa4a8c4c0d082047536727b4be47)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Improve the performance of the RPM backend during do_rootfs by
performing most of the package name to file resolution in a separate
utility written in C, processing the entire list of packages at once
rather than running rpm on the command line which loads the RPM database
for every package.
(From OE-Core rev: 9135d351ba7cb21e50239d2b310565680bd4fdca)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a package-index.bb which will update the index, but the
DEPLOY_DIR_RPM may not exist, for example, when "bitbake package-index"
in a fresh build.
Only the package_rpm.bbclass needs this, the package_ipk.bbclass and
package_deb.bbclass doesn't need.
[YOCTO #2753]
(From OE-Core rev: 72e18bb4171698a386b277b12d973e3d0fd7c4cc)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bb and os modules are always imported so having these extra import calls
are a waste of space/execution time. They also set a bad example for people
copy and pasting code so clean them up.
(From OE-Core rev: 7d674820958be3a7051ea619effe1a6061d9cbe2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When constructing a multilib based image, it's possible to end up with
the same package listed in multiple steps of the install. During resolution
we use the --replacepkgs option to avoid errors, as the resulting install
solution will be as expected. (We do not enable the replacepkgs option
for the final install step, only the generation of the install solution.)
(From OE-Core rev: 68ea7d827710ae7c5cf402887d4c12319038e064)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a recent change, the path to log files may be contained within an
arbitrary directory. To generate the manual log files in the correct path
we should be using the ${BB_LOGFILE}'s path instead of always assuming the
logs go into ${WORKDIR}/temp.
(From OE-Core rev: 779db325d407f0bade84572ef99fdad4d0c88011)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes:
* Remove the "echo '# Remove manifest padding....' > remove.manifest,
The remove.manifest would be used via "rpm -e `remove.manifest`",
there would be error since there is no pkg called: Remove, manifest or
padding
* The incremental.manifest can't be null when used by rpm, so check it
before use.
* The rpm needs:
--root "${target_rootfs}/install"
when use:
-D "_dbpath ${target_rootfs}/install"
Otherwise it would use the ${target_rootfs} as the root, and use the
${target_rootfs}/var/lib/rpm as the dbpath, this is OK in a fresh
installation, but there would be errors when increment rpm generation.
[YOCTO #2617]
(From OE-Core rev: 7d702c637b84c028c9763246b3ac355d10083ea3)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
An empty manifest will cause a failure condition. We ensure that any install
actions occur only with a manifest larger then size 0. Also ensure that padding
is added to the end of the manifest, instead of the beginning to enable this
size check. (Padding is required for very small manifest files..)
(From OE-Core rev: 9b115181a8b10ec1eb8eac355405695f63e2e011)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move the creation of the database configuration files to just before we
perform the install actions. This ensures they will exist even in SDK or
other non-target filesystem images.
(From OE-Core rev: 113e015afd46e46c9ba0413ca15f0316fa2eec24)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add functionality to RPM to directly query the packageorigin (path) from
the resolver database, instead of having to do this via an indirect method.
This results in a minor performance improvement.
(From OE-Core rev: a8ff3141fd78442bf328c9d3a489db88ad27486b)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Refactor in order to:
* Deprecate the old interfaces, but keep them for compatibility
* Provide a new, interface -- capable of working with split packages
* Each update-alternative will now set proper "per-file" provides
Note: this adds a warning message when the older deprecated behavior is
used. The older behavior has been fully tested using oe-core.
(From OE-Core rev: 309117d26de6a87b16406a44a0cefcbaaf7b5d7a)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the incremental rpm image generation, it didn't work since the code
has been changed.
The btmanifest should have a ".manifest" suffix, so that it can be moved
to ${T} by rootfs_rpm.bbclass:
mv ${IMAGE_ROOTFS}/install/*.manifest ${T}/
Note: The locale pkgs would always be re-installed.
[YOCTO #2440]
(From OE-Core rev: 5149630746626c6d416f26ab9dd1c7213fcd8c50)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The usage of this function renaming and it being called using
bb.build.exec_func() causes needless indirection loops, confusing log
files and seems generally pointless.
This simplification makes the process much simpler and faster. I can't
come up with a good reason why the export_functions functionality is
needed for this function.
(From OE-Core rev: 74daad03ca29a03b0005f7d2b90a0347d5b583a5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change farms the solvedb creation out to a separate script which
handles creation of the index, only if mtime of any of the packages
has changed.
For a core-image-minimal set of rpm's this saves ~20s of a 45s rootfs
build. For core-image-sato it saves 1 minute of a 5 minute rootfs build.
The more packages in the system, the bigger the saving will be.
(From OE-Core rev: 3021136e7b42ab64ca16f30c88467c4b00d51ee0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing shell script is a fork bomb and forks off hundreds of
grep/cur/wc calls as it reads from its input stream and iterates over
the file data table for each line of input. This patch replaces the
shell code with python code which doesn't exec anything and hence runs
much faster without the exec() overhead. This speeds up rpm packaging
considerably, as can be measured simply by timing it, or watching the
processor utilisation.
(From OE-Core rev: 2fb5f72b47840ed7f540df181595878e3f5ba4c6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the rootfs has a specific layout in mind for /var/tmp, it should be
free to create this. Preinst scripts trigger rpm to create its tmppath
directory which could potentially conflict with this.
We're seeing issues if the provider of the /var/tmp wants to use a symlink
and a preinst script executes before it has been installed. This change
places tmppath as used by rpm somewhere safe which is already automatically
cleaned up too.
(From OE-Core rev: 71e95c744eaa4dda1b3237db2e13f666f121c92b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were already having occasional ordering issues with package_rpm.
Fixing the ldconfig postinstall issue pushed rpm over the cliff and
totally broke rpm builds with the packages getting installed in
effectively a random order and the useradd preinstalls getting executed
out of order and breaking.
The only explanation I can find for this is that rpm is special. It will
happily run a preinst for a package without any of that package's
dependencies being present regardless of whether there are any circular
dependency issues or not. I attempted various ways of solving this such
as ordering the total_solution.manifest in creative ways but the bottom
line is RPM ignores this. It takes little account of any request to
ignore /bin/sh dependencies for the purposes of constructing the final
image.
The end result is we're having to install the base-passwd, base-files
and shadow packages first (if there is a request to install them), then
install any other packages.
It this wasn't in the middle of a release I'd be rewriting this bbclass
file, its horrible.
(From OE-Core rev: 2c136255a7db8c57ab595a9c2ee1f32aebefc480)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Explicitly set umask to 022. Otherwise the build system's
umask may leak into the image.
(From OE-Core rev: d2a54427481856238bdfec9723cf575088320512)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new function to archive source, patches and logs to a source rpm
package. Every source rpm package will be deployed to
${DEPLOY_DIR}/sources/deploy-srpm
[YOCTO #1977]
(From OE-Core rev: be2db850fbe516b92a3991a5eaf646c4a2b8a1b9)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When generating images, we need to make sure that base-passwd and
shadow get installed before other packages, which might need to create
custom user accounts.
Thanks to Richard Purdie for the initial version of this fix.
This fixes [YOCTO #2127]
(From OE-Core rev: 3d2d3cb379608301b17ce57787d324c2f06bf4f9)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using "1" with getVar is bad coding style and "True" is preferred.
This patch is a sed over the meta directory of the form:
sed \
-e 's:\(\.getVar([^,()]*, \)1 *):\1True):g' \
-e 's:\(\.getVarFlag([^,()]*, [^,()]*, \)1 *):\1True):g' \
-i `grep -ril getVar *`
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Files with spaces must be fully quoted in an RPM spec file. It was
easier to quote all file paths, then to do it selectively.
(From OE-Core rev: a0f5dd25a37fe3b8664c2133e80b6214559f93f6)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Incremental rpm image generation, the rootfs would be totally removed and
re-created in the second generation by default, but with
INC_RPM_IMAGE_GEN = "1", the rpm based rootfs would be kept, and will do
update(remove/add some pkgs) on it.
NOTE: This is not suggested when you want to create a productive rootfs
For example:
1) Add the follow config option to a conf file:
INC_RPM_IMAGE_GEN = "1"
2) bitbake core-image-sato
modify a package
bitbake core-image-sato
The rootfs would not be totally removed and re-created in the second
generation, it would be simply updated based on the "package".
Implatation:
1) Figure out the pkg which need to be removed or re-installed, then use
'rpm -e to remove the old one. Use the rpm's BUILDTIME to determine
which pkg has been rebuilt.
2) Figure out the pkg which is newly added, and use 'rpm -U' to install
it.
This only for the rpm based rootfs, the deb and ipk based rootfs would
be done later.
[YOCTO #1651]
(From OE-Core rev: 575ba3c9e153a1d8ac228a99a03ca2df5fbca151)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a way to add arbitrary text to the top of a spec file. This
can be useful for adding specific tags to the produced binaries for
tracking purposes.
(From OE-Core rev: c01a92408d267bcc5365bf8495035f6021a49ced)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The magic file could be installed somewhere else if the system native prefix
settings are changed. Adjust the packaging files to compensate for this.
(From OE-Core rev: 93c0e9915b5c9bf8b0877c76f89de721adfbfd66)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Complete the bb.data.getVar/setVar replacements with accesses
directly to the data store object.
(From OE-Core rev: 2864ff6a4b3c3f9b3bbb6d2597243cc5d3715939)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Occasionally we keep seeing "unable to open temp file" messages during
do_package_write_rpm tasks. This appears to happen when multiple
processes are writing rpm files and is likely due to using the
shared system temp directory. This patch changes the tmp path
to the package work directory meaning conflicts should become
a non-issue.
(From OE-Core rev: b2ef543284c8c8d0d3badb2e1bcadad1106982d2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1755]
We change the want the RPM rootfs install works to install pre and post install
scripts. The new method uses a script helper that is invoked by RPM outside
of the normal chroot.
The wrapper is dynamically generated prior to the install starting. It will
check the return code of the script. If the script fails, it will store a copy
to be executed on the first system boot. This is similar to the previous
mechanism.
In addition, a line of debug was added to the scripts as written by package_rpm
to list which package and which script for later debugging, if necessary.
(From OE-Core rev: 3e7120d6a9fd5e46214673d0a6e1085a7314ff42)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
