A number of the recipes did not properly label their pre and post
actions, causing the actions to occur in all split packages. This
was corrected by defaulting to _${PN} in most cases.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
A recent busybox change added a "second" initscript to the main busybox
package. This however is not supported by the update-rc.d.bbclass.
Instead we split the package so that each initscript gets it's own split.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Fixes [BUGID #693]
The init-live.sh script starts udevd in init-live.sh:early_setup(),
but doesn't account for the possibility that the root device may have
already been registered by the kernel before udevd starts up.
If the device is detected after udevd starts up, everything's fine -
udevd gets the 'add' uevent for the device, the root image shows up at
e.g. /media/sda/rootfs.img, and the boot continues.
If however the device is detected before udevd starts up, udevd misses
the 'add' uevent and the root image never shows up, causing it to stay
in the 'waiting for removable media' loop forever.
The 'udevadm trigger' command is meant to be used to avoid this
situation, but init-live.sh doesn't use it. Furthermore, since the
default was changed in udev 152 from 'add' to 'change', the command
needs to explicity name 'add' as the action.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Add the mount lock patch that moves the lock file from the potentially R/O
/etc, to the R/W /var/lock directory.
This resolves a problem when mounting when / (and /etc) is mounted R/O.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Add a number of bug fixes, mostly imported from Fedora and Wind River
Linux.
cp-i-u: fix unnecessary prompting
fix-install: Fix installing to a dangling symlink
i18n: li18nux/lsb compliance
ls-x: Fix incorrect output
overflow: Fix potential overflow in who command
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
When the kernel is started using ip=dhcp, we want a way to be able to run
the udhcp client within busybox and not reset the interface.
When using the '-D' option to udhcpc, the defconfig script will be skipped
allowing the refresh without changing the network settings.
Also provide an initscript that can be used to detect ip=dhcp on the
kernel command line, if detected it will refresh the lease and set the
proper resolve.conf and related files, but not reset the interface.
Original code in Wind River Linux by Greg Moffatt <greg.moffat@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Move the populate_sdk task out of meta-toolchain. Made it more generic
to support rpm/deb package format.
This commit is dependant on a series of commit:
2ea0406e4516fc59dff86cb4adc35c82cb774c2f
7ffa45b7cfea24dae1b51f40cfc807bf78b21b66
bf201a74c243942af3fcae6f174496bdd819dbc0
3d29933f2925efe8a84f10efdf50396031c33ae4
3d29933f2925efe8a84f10efdf50396031c33ae4
9c724dbf57e610a9e06bbdce38383dee3ac49281
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
BBCLASSEXTEND dbus to nativesdk for meta-toolchain-qte, and disable the
dependency on libsm when building in this context (thus avoiding a number of
sub-dependencies).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
these two are useful in the development environment, and also required
by two LTP test cases (ld and ldd).
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
now the PATH for root user defined in a problematic way
PATH=$PATH:/usr/local/sbin:/usr/sbin:/sbin:
from eglibc:
/* Two adjacent colons, or a colon at the beginning or the end
of `PATH' means to search the current directory. */
that means current directory is always searched as the last path,
which could generate undesired behavior.
One example is found in LTP cron_deny01 test, which always complains
"sh: cron_deny01 not found"
cron_deny01 is a shell script which setups the initial test preparation
and then invokes itself for real test under a different user:
su $TEST_USER1 -c "$0"
'su' doesn't inherit PATH into the sub-shell, and thus $0 has to
be an absolute path to have right script found.
ltp appends the path of cron_deny01 to $PATH before running the test:
export PATH="${PATH}:${LTPROOT}/testcases/bin"
In ideal way "${LTPROOT}/testcases/bin/cron_deny01" is found and becomes
$0, which works well.
However due to the ending colon in original PATH:
PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin::${LTPROOT}/testcases/bin
$0 becomes 'cron_deny01' w/o leading path which makes sub-shell under 'su'
failed to locate cron_deny01.
remove ending colon then fixes this problem.
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Change the name from toolchain-sdk to toolchain-gmae,
which is more accurate to what meta-toolchain-sdk generates
Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Apply a couple of best practices to the recipe:
1) use the gettext class to ensure the right versions of gettext are
used for the recipe variants (target, native, etc).
2) use layout variables rather than absolute paths in the package FILES_
definitions.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
It is not needed to have dependency on each do_compile of its recursive
depend tasks.
This problem is triggered by building meta-toolchain-sdk from prebuilt
result. Some packages like quilt-native, which is already been populated
and packaged by do_populate_sysroot_setscene and
do_package_write_xxx_setscene, however this recursive dependency of
do_compile triggers the tasks flow of "do_setscene --> do_fetch -->
do_unpack --> ..." again and do_setscene removes all the quilt-native
files, making the other recipes failed while do_patch.
Thanks for Kevin's help in root causing this issue.
CC: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Enable "debug" option of glib-2.0 and make "glib_mem_profiler_table" and "g_mem_profile" enabled for LSB test.
Signed-off-by: Jingdong Lu<jingdong.lu@windriver.com>
[BUGID #562] fixing:
1. Adjusted the content of various packages generated by libtool.
2. Added libtool-nativesdk into task-sdk-host.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Add systemtap, a general-purpose script-directed dynamic tracing and
performance analysis tool for Linux.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
SRCPV is intended being used by PV, some recipes still use
SRCREV for PV, which is not correct. This patch fix all the
misusage.
Signed-off-by: Yu Ke <ke.yu@intel.com>
from 5.4
Largely based on the recipe from OpenEmbedded project
ncurses: fix LIC_FILES_CHKSUM
Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
For these recipes the dependencies listed in RDEPENDS and RRECOMMENDS only apply to ${PN}
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
The commit for BUGID #581 fixes the blktrace build errors - it should
now be safe to re-enable the blktrace recipe.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
environment files.
[BUGID #565] Fixing bug #565, added package of
meta-environment-${TARGET_ARCH} for environment files used by
cross-canadian toolchain.
Also corrected the situation of empty config site file for target.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Integrate patch from david.barksdale@adcedosolutions.com to ensure
/dev/fb exists which is required by the igep00200 platform to start X
[BUGID #541]
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
An investigation into undocumented variables uncovered a few mispellings
of the variable DESCRIPTION.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
If this recipe doesn't reflect TARGET_ARCH in its name, only
one flavour of cross toolchain can be installed at once.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Using TRANSLATED_TARGET_ARCH instead of TARGET_ARCH for
cross-canadian packages. This is due to the TARGET_ARCH of x86_64
would results incorrect packaging in cross-canadian packages.
The pacakge name appendix of x86_64 target in cross-canadian
packages is x86-64.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
This commit fixes Bug #528.
1. Added the target arch name to the pkg name of gcc-cross-canadian,
gdb-cross-candian and bintuils-cross-candian.
2. Move the cross-canadian pkgs out of task-sdk-host into a new task
task-cross-canadian.
3. Added the RDEPENDS of task-cross-canadian into meta-toolchain.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
mesa 7.9 build script es_generator.py use libxml2 API xmlLsCountNode,
which only available in debug module, so remove the --without-debug
option for mesa 7.9
Signed-off-by: Yu Ke <ke.yu@intel.com>
Add COPYING file checksum to bb file
[sgw@linux.intel.com: changed to use ${POKYBASE} instead of L
Signed-off-by: Mei Lei <lei.mei@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Mark Hatle
Richard Purdie
Tom Zanussi
Saul Wold
Jingdong Lu
Lianhao Lu
Paul Eggleton
Kevin Tian
Joshua Lock
Jessica Zhang
Dexuan Cui
Qing He
Dongxiao Xu
Mei Lei
Otavio Salvador
Koen Kooi
Yu Ke
Scott Garman
Darren Hart
Richard Purdie
Nitin A Kamble
Saul Wold