This commit makes assembly syntax compatible with x32 toolchain
to avoid these x32 gcc errors:
| pulsecore/svolume_mmx.c: Assembler messages:
| pulsecore/svolume_mmx.c:107: Error: `(%esi,%rdi,4)' is not a valid
base/index expression
| pulsecore/svolume_mmx.c:135: Error: `(%esi,%rdi,4)' is not a valid
base/index expression
| pulsecore/svolume_mmx.c:161: Error: `(%esi,%rdi,4)' is not a valid
base/index expression
| pulsecore/svolume_mmx.c:162: Error: `8(%esi,%rdi,4)' is not a valid
base/index expression
| pulsecore/svolume_mmx.c:180: Error: `(%esi,%rdi,4)' is not a valid
base/index expression
| pulsecore/svolume_mmx.c:210: Error: `(%esi,%rdi,4)' is not a valid
base/index expression
| pulsecore/svolume_mmx.c:244: Error: `(%esi,%rdi,4)' is not a valid
base/index expression
| pulsecore/svolume_mmx.c:245: Error: `8(%esi,%rdi,4)' is not a valid
base/index expression
| make[3]: *** [libpulsecore_1.1_la-svolume_mmx.lo] Error 1
Orignally these assembly lines are written for x86_64 ABI, now they are
also compatible with
X32 ABI.
(From OE-Core rev: ccf01c858218ae67d609ced3a05d9a93a6ffc5d4)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes bug: [YOCTO #1403]
the custom definition of CC was causing build isuses with x32 toolchain.
And also I found out that the hack is not neccessary anymore. the
affected gst-fluendo-mpegdemux recipe builds fine without the CC hack.
(From OE-Core rev: 81cbedaaddd589e03fe2f6cb789907b1e555a9d6)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a quick audit of only the most obviously wrong licenses
found within OECore. These fixes fall into four areas:
- LICENSE field had incorrect format so that the parser choked
- LICENSE field has a license with no version
- LICENSE field was actually incorrect
- LICENSE field has an imaginary license that didn't exist
This fixes most of the LICENSE warnings thrown, along with my prior
commit adding additional licenses to common-licenses and additional
SPDXLICENSEMAP entries.
HOWEVER..... there is much to be done on the license front.
For a list of recipes with licenses that need obvious fixing see:
https://wiki.yoctoproject.org/wiki/License_Audit
That said, I would suggest another license audit as I've found
enough inconsistencies. A good suggestion is when in doubt, look at
how openSuse or Gentoo or Debian license the package.
(From OE-Core rev: 3083dd70b3a9fa01fcc3cf00373b05502505996e)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This Fixes bug: [YOCTO #1418]
Remove the `q' suffix on x86-64 atomic instructions.
We don't need the `q' suffix on x86_64 atomic instructions for AO_t,
which is defined as "unsigned long". "unsigned long" is 32bit for x32
and 64bit for x86-64. The register operand in x86-64 atomic instructions
is sufficient to properly determine the register size.
(From OE-Core rev: daaaeb1bd1467a2bed75722ce3ff35be970402e0)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The only thing that got lost in the conversion is the "Pulse Audio daemon" description:
root@beagleboard:~# grep pulse /etc/passwd /etc/group
/etc/passwd:pulse:x:999:1000::/var/run/pulse:/bin/false
/etc/group:audio:x:29:pulse
/etc/group:pulse:x:1000:pulse
(From OE-Core rev: 2e5c7566a4b76bf3e783844cc69fd1313c6d97a4)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=270449
(From OE-Core rev: 9a2f49c97116dfd718a6a055b296fc68ad668d5f)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Volatiles are handled differently in a systemd world make the postinst fail:
//var/lib/opkg/info/pulseaudio-server.postinst: line 10: /etc/init.d/populate-volatile.sh: No such file or directory
Collected errors:
* pkg_run_script: package "pulseaudio-server" postinst script returned status 127.
* opkg_configure: pulseaudio-server.postinst returned 127.
(From OE-Core rev: d911635bdcb84bb162b49bca32c7c7867e56a023)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Complete the bb.data.getVar/setVar replacements with accesses
directly to the data store object.
(From OE-Core rev: 2864ff6a4b3c3f9b3bbb6d2597243cc5d3715939)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* needed for libsdl-nativesdk when DISTRO_FEATURES have alsa
(From OE-Core rev: da8425174529f10e16cde21fbea7f804284c38ae)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* this is just work around, should be tested again after upgrade to
pulseaudio-1.1
* otherwise build for armv4t (om-gta02) fails with this:
| /bin/sh ../arm-oe-linux-gnueabi-libtool --tag=CC --mode=compile
arm-oe-linux-gnueabi-gcc -march=armv4t -mthumb -mthumb-interwork
-mtune=arm920t --sysroot=/OE/shr-core/tmp/sysroots/om-gta02 -std=gnu99
-DHAVE_CONFIG_H -I. -I.. -I../src -I../src -I../src/modules
-I../src/modules -I../src/modules/rtp -I../src/modules/rtp
-I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth
-I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss
-I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop
-I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11
-I../src/modules/jack -I../src/modules/jack -I../src/modules/echo-cancel
-I../src/modules/echo-cancel -pthread -D_POSIX_PTHREAD_SEMANTICS
-DPA_BUILDDIR=\"/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/pulseaudio-0.9.23/src\"
-DPA_DLSEARCHPATH=\"/usr/lib/pulse-0.9.23/modules\"
-DPA_DEFAULT_CONFIG_DIR=\"/etc/pulse\"
-DPA_BINARY=\"/usr/bin/pulseaudio\"
-DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\"
-DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\"
-DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS
-DPULSE_LOCALEDIR=\"/usr/share/locale\"
-DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\"
-DPA_ALSA_PATHS_DIR=\"/usr/share/pulseaudio/alsa-mixer/paths\"
-DPA_ALSA_PROFILE_SETS_DIR=\"/usr/share/pulseaudio/alsa-mixer/profile-sets\"
-O2 -pipe -g -feliminate-unused-debug-types -Wall -W -Wextra -pipe
-Wno-long-long -Winline -Wvla -Wno-overlength-strings
-Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op
-Wsign-compare -Wformat-security -Wmissing-include-dirs
-Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self
-Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes
-Wstrict-prototypes -Wredundant-decls -Wmissing-declarations
-Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align
-Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math
-Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -c -o
libbluetooth_sbc_la-sbc.lo `test -f 'modules/bluetooth/sbc.c' || echo
'./'`modules/bluetooth/sbc.ci
| arm-oe-linux-gnueabi-libtool: compile: arm-oe-linux-gnueabi-gcc
-march=armv4t -mthumb -mthumb-interwork -mtune=arm920t
--sysroot=/OE/shr-core/tmp/sysroots/om-gta02 -std=gnu99 -DHAVE_CONFIG_H
-I. -I.. -I../src -I../src -I../src/modules -I../src/modules
-I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf
-I../src/modules/gconf -I../src/modules/bluetooth
-I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss
-I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop
-I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11
-I../src/modules/jack -I../src/modules/jack -I../src/modules/echo-cancel
-I../src/modules/echo-cancel -pthread -D_POSIX_PTHREAD_SEMANTICS
-DPA_BUILDDIR=\"/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/pulseaudio-0.9.23/src\"
-DPA_DLSEARCHPATH=\"/usr/lib/pulse-0.9.23/modules\"
-DPA_DEFAULT_CONFIG_DIR=\"/etc/pulse\"
-DPA_BINARY=\"/usr/bin/pulseaudio\"
-DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\"
-DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\"
-DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS
-DPULSE_LOCALEDIR=\"/usr/share/locale\"
-DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\"
-DPA_ALSA_PATHS_DIR=\"/usr/share/pulseaudio/alsa-mixer/paths\"
-DPA_ALSA_PROFILE_SETS_DIR=\"/usr/share/pulseaudio/alsa-mixer/profile-sets\"
-O2 -pipe -g -feliminate-unused-debug-types -Wall -W -Wextra -pipe
-Wno-long-long -Winline -Wvla -Wno-overlength-strings
-Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op
-Wsign-compare -Wformat-security -Wmissing-include-dirs
-Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self
-Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes
-Wstrict-prototypes -Wredundant-decls -Wmissing-declarations
-Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align
-Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math
-Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -c
modules/bluetooth/sbc.c -fPIC -DPIC -o .libs/libbluetooth_sbc_la-sbc.oi
| modules/bluetooth/sbc.c: In function 'sbc_synthesize_four':
| modules/bluetooth/sbc.c:553:18: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c: In function 'sbc_synthesize_eight':
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| {standard input}: Assembler messages:
| {standard input}:6997: Error: selected processor does not support Thumb mode `mla r3,r0,ip,r3'
| {standard input}:7012: Error: selected processor does not support Thumb mode `mla r3,r1,ip,r3'
| {standard input}:7026: Error: selected processor does not support Thumb mode `mla r3,ip,r0,r3'
| {standard input}:7215: Error: selected processor does not support Thumb mode `mla r3,r7,r0,r3'
| {standard input}:7230: Error: selected processor does not support Thumb mode `mla r3,r7,r0,r3'
| {standard input}:7241: Error: selected processor does not support Thumb mode `mla r3,r0,r7,r3'
| {standard input}:7256: Error: selected processor does not support Thumb mode `mla r3,r0,r7,r3'
| {standard input}:7267: Error: selected processor does not support Thumb mode `mla r3,r7,r0,r3'
| {standard input}:7287: Error: selected processor does not support Thumb mode `mla r3,r7,r6,r3'
| {standard input}:7301: Error: selected processor does not support Thumb mode `mla r3,r6,r5,r3'
| {standard input}:7319: Error: selected processor does not support Thumb mode `mla r3,r0,r5,r3'
| {standard input}:7327: Error: selected processor does not support Thumb mode `mla r3,r1,r0,r3'
| {standard input}:7594: Error: selected processor does not support Thumb mode `mla r3,r5,r6,r3'
| {standard input}:7604: Error: selected processor does not support Thumb mode `mla r3,r5,r6,r3'
| {standard input}:7614: Error: selected processor does not support Thumb mode `mla r3,r5,r6,r3'
| {standard input}:7624: Error: selected processor does not support Thumb mode `mla r3,r5,r6,r3'
| {standard input}:7634: Error: selected processor does not support Thumb mode `mla r3,r5,r6,r3'
| {standard input}:7647: Error: selected processor does not support Thumb mode `mla r3,r2,r5,r3'
| {standard input}:7657: Error: selected processor does not support Thumb mode `mla r3,r2,r5,r3'
| {standard input}:7815: Error: selected processor does not support Thumb mode `mla r3,r9,r7,r3'
| {standard input}:7837: Error: selected processor does not support Thumb mode `mla r3,r9,r0,r3'
| {standard input}:7853: Error: selected processor does not support Thumb mode `mla r3,r9,r0,r3'
| {standard input}:7875: Error: selected processor does not support Thumb mode `mla r3,r9,r7,r3'
| {standard input}:7891: Error: selected processor does not support Thumb mode `mla r3,r9,r7,r3'
| {standard input}:7908: Error: selected processor does not support Thumb mode `mla r3,r0,r6,r3'
| {standard input}:7931: Error: selected processor does not support Thumb mode `mla r3,r6,r5,r3'
| {standard input}:7952: Error: selected processor does not support Thumb mode `mla r3,r0,r5,r3'
| {standard input}:7960: Error: selected processor does not support Thumb mode `mla r3,r2,r0,r3'
| make[4]: *** [libbluetooth_sbc_la-sbc.lo] Error 1
| make[4]: Leaving directory `/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/pulseaudio-0.9.23/src'
| make[3]: *** [all-recursive] Error 1
| make[3]: Leaving directory `/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/pulseaudio-0.9.23/src'
| make[2]: *** [all] Error 2
| make[2]: Leaving directory `/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/pulseaudio-0.9.23/src'
| make[1]: *** [all-recursive] Error 1
| make[1]: Leaving directory `/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/pulseaudio-0.9.23'
| make: *** [all] Error 2
| + die 'oe_runmake failed'
| + bbfatal 'oe_runmake failed'
| + echo 'ERROR: oe_runmake failed'
| ERROR: oe_runmake failed
| + exit 1
| ERROR: Function 'do_compile' failed (see /OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/temp/log.do_compile.3404 for further information)
(From OE-Core rev: 31a20d50124344dc708ade282677b2c7dda171b0)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* otherwise ie spitz (armv5te) build fails with:
| make[3]: Entering directory `/OE/shr-core/tmp/work/armv5te-oe-linux-gnueabi/libatomics-ops-1.2-r5/libatomic_ops-1.2/src'
| arm-oe-linux-gnueabi-gcc -march=armv5te -mthumb -mthumb-interwork -mtune=xscale --sysroot=/OE/shr-core/tmp/sysroots/spitz -DHAVE_CONFIG_H -I. -fPIC -O
2 -pipe -g -feliminate-unused-debug-types -DNDEBUG -c atomic_ops.c
| arm-oe-linux-gnueabi-gcc -march=armv5te -mthumb -mthumb-interwork -mtune=xscale --sysroot=/OE/shr-core/tmp/sysroots/spitz -DHAVE_CONFIG_H -I. -fPIC -O
2 -pipe -g -feliminate-unused-debug-types -DNDEBUG -c atomic_ops_stack.c
| arm-oe-linux-gnueabi-gcc -march=armv5te -mthumb -mthumb-interwork -mtune=xscale --sysroot=/OE/shr-core/tmp/sysroots/spitz -DHAVE_CONFIG_H -I. -fPIC -O
2 -pipe -g -feliminate-unused-debug-types -DNDEBUG -c atomic_ops_malloc.c
| atomic_ops_malloc.c: In function 'msb':
| atomic_ops_malloc.c:223:2: warning: right shift count >= width of type [enabled by default]
| rm -f libatomic_ops_gpl.a
| ar cru libatomic_ops_gpl.a atomic_ops_stack.o atomic_ops_malloc.o
| arm-oe-linux-gnueabi-ranlib libatomic_ops_gpl.a
| {standard input}: Assembler messages:
| {standard input}:286: Error: selected processor does not support Thumb mode `swp r1,r2,[r3]'
| {standard input}:329: Error: selected processor does not support Thumb mode `swp r0,r1,[r3]'
* this is just work around, proper fix proposed by Henning Heinold
hm we should think of reworking this recipe now. Because since gcc 4.5
pulseaudio for arm can use the gcc internal atomicstuff and in oe-core
and meta-oe we have 4.5 or 4.6 only. The lib is
only needed for mips and it is still the old release, on cvs
is a much better version, which supports thumb too, if
remember correctly.
(From OE-Core rev: 2d34fc0ce21fe06ff97208c8ffb65a718b444de9)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the x11 distro feature to determine whether --with-x should be
passed. Further, if we're using X11 add gtk+ to DEPENDS (it's required
to build).
(From OE-Core rev: a37ed5b42717463cf1a836fd011132b16938765f)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create an extra package, libcanberra-gnome, for gdm and
gnome-settings-daemon files installed by libcanberra.
(From OE-Core rev: ec46e591636cf1d27587038989c6b917d19be130)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the shipped gconf schema to the gconfelements package and inherit the gconf
class so that schema processing is handled via post* scripts.
(From OE-Core rev: 4c5064b3dc22eba610231819347bc029e1cf5af4)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
manpage generatition uses xmltoman utility
which inturn uses xml-parser. So we add
libxml-parser-perl-native to DEPENDS and also
inherit perlnative so it does not use the one
from build host
(From OE-Core rev: 51f6a683ec1d740adf09d808671c7098dc3f83e2)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This explicitly enables the pulseaudio plugin rather than it being built
if pulseaudio happens to have been built first.
(From OE-Core rev: b869f4ab157f120282f518df7e0c6fddace9821c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If "bluetooth" is in DISTRO_FEATURES then enable bluetooth and depend on
bluez4, otherwise disable it.
(From OE-Core rev: f53d70bdeed989e031e06b8851a9706ff7ab9855)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This core does not have altivec, so we disable it in the build,
also reestablish the config option to enable/disable building
with altivec
If SPE is not detected we always build with altivec which is wrong. This
will check to make sure altivec is enabled and pass build options
through accordingly
(From OE-Core rev: 96241de59fdf548ae0f80cc9e4668f9ba11924ef)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
alsa-lib: Don't use versioned symbols on uclibc builds as it causes strange hangs. Taken from oe-classic.
(From OE-Core rev: b354eb957ce08ac7814ce46c13ca3a8449b4063a)
Signed-off-by: Daniel Lazzari Jr <dlazzari@leapfrog.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As for libpng recipe, the libpng.pc is a symbol link to libpng12.pc,
if packaging them into two different packages, we will get a dangling
link for libpng.pc, and when calculating rpm dependency with that file,
we will get nothing.
Only keep one version of dev package to fix the issue.
(From OE-Core rev: 50232671951e0b69d52a685b82a10be335458292)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make alsa-utils main package depend on all of the more specific alsa-utils packages (such as alsa-utils-alsamixer).
(From OE-Core rev: 181063d0ae52b6c5ec203ea7c4fee629761cafdf)
Signed-off-by: Daniel Lazzari Jr <dlazzari@leapfrog.com>
PR Bump
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some place pnum=1 is used which is removed as well since
striplevel=1 is default
(From OE-Core rev: 4e108857e0d40105f7ecbc55e99bd6c367bb7386)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update license and other informations, then bump up PR.
Update distro tracking fields.
(From OE-Core rev: b989bb90919eb28cb92e842e989aa5b1fd7f068c)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Gst-plugins get 2 extra packages:
${PN}-apps: helper apps in ${bindir}
${PN}-meta: meta package that will drag in all plugins, libs and apps ${PN} generates
And all libs are split out and run through debian style renaming if enabled.
The packaging include was split out to be reused by external plugins (e.g. gst-plugin-gl, gst-fluendo-*).
The new package list looks like:
libgstapp-0.10-0_0.10.32-r1_armv7a.ipk
libgstfft-0.10-0_0.10.32-r1_armv7a.ipk
[..]
gst-plugins-base-videorate_0.10.32-r1_armv7a.ipk
gst-plugins-base-videoscale_0.10.32-r1_armv7a.ipk
[..]
gst-plugins-base-meta_0.10.32-r1_armv7a.ipk
[..]
gst-plugins-base-apps_0.10.32-r1_armv7a.ipk
(From OE-Core rev: 4bfd595934c1f6839ae848b09ecca439d92bf014)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Pass $libdir through when we configure to support a location
other than /lib. We also have to tweak the cmake files to allow $libdir
to even be set.
(From OE-Core rev: a91c417aff129623c49549394810e1a018f92011)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
in multilibcase, PN has multilib prefix, so it is not
correct to use PN in SRC_URI and S. instead, we've
dedicately pruned multilib prefix in BPN, so BPN is
the right alternative for PN.
(From OE-Core rev: d6dca85028640034b1a5356920aad3268bd4f1c2)
Signed-off-by: Yu Ke <ke.y@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For a PPC target flac will try to build with altivec optimizations.
Altivec and SPE are mutually exclusive options. Between flac's
configure choices and the ppce500v2 tune file options we'd end up with
a compile invocation with the following arguments:
-mabi=spe -mspe -mabi=altivec -maltivec
Which would cause the compile to fail due to the mutual exclusion.
Pulled in a patch from the debian SPE port that addresses this issue:
http://lists.alioth.debian.org/pipermail/pkg-multimedia-maintainers/2010-June/010212.html
(From OE-Core rev: 0cb68387f9aca914c603a26e85a2ea405f721f53)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This addresses the following security advisories:
* CVE-2011-2690
* CVE-2011-2692
This fixes bug [YOCTO #1255]
The LICENSE and png.h checksum changes were due to trivial changes
in the files.
(From OE-Core rev: e912fc9d20298140ad0b69899e20a1494f21b37e)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove some elements in alsa-tools to avoid build error and further
dependency on new recipes.
[YOCTO #1038]
(From OE-Core rev: 81e92e8eab7f0f3d4ca72d4c7d1b872ebdc82fc8)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* reuse 'audio' group as access group
The current failure is:
root@usrp-e1xx:/etc/pulse# pulseaudio --system
[..]
W: protocol-native.c: Failed to get GID of group 'pulse-access'
W: protocol-native.c: Failed to check group membership.
W: protocol-native.c: Denied access to client with invalid authorization data.
* add more required modules
(From OE-Core rev: 756e5fb08ee65cf459d88f97ae51adc86af75a70)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This disables linking against (lib)hal but enables the udev-hal compat layer so the hal-detect plugin keeps working. The hal-detect plugin is removed from the default dependencies to discourage its usage, but can be installed manually if needed.
(From OE-Core rev: e9fedfac0d8ff8213a142a7cfab9b83c840aef4f)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Older version have been retained to allow more testing of this release
(From OE-Core rev: f1fc6d084b079dea21ff1a30b815496452042490)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
HAL is deprecated and udev should be used with pulseaudio 0.9.22. THe .23 release from 2 weeks ago already removed HAL support.
(From OE-Core rev: 8579edc2f3f06cbe27ebfae52f8daff4ac6972f4)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As discussed on the mailing list, this variable isn't useful and if wanted
would be better implemented by distros using pn-X overrides.
This patch executes:
find . -regex ".*\.\(bb\|inc\)$" | xargs sed -i '/^PRIORITY = ".*"$/d'
against the tree removing the referenced. Thanks to Phil Blundell for
the command.
(From OE-Core rev: d122343362669c683acc4af295971a62cbc823fc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove unnecessary dependency via configure option and make oprofileui use GIO
(From OE-Core rev: ad5481f6348d1bc504729efd4321bf1fcac4083b)
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Put the rules and scripts associated with alsactl in the alsactl subpackage
(From OE-Core rev: 0b0a46483f151118c76acf2d60f117b10d4aa343)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I've cleaned up some odd license fields, fixed some license
names and corrected some incorrect licenses. LICENSE really needs
a pass through by the maintainers as some of the licensing is
incorrect.
Also, every license with Artistic should be gone through and noted as
which version of Artistic.
(From OE-Core rev: 4786ecdf7cd427089464dcb62579110d494e7cd7)
Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gst-plugins-base requires the libvorbisidec library which is part of tremor
(From OE-Core rev: 358ffed8f61d30b5b434b3745a13930906bcfefe)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gypsy: Add upstream status information for gypsy's patch
alsa-utils: fix upstream status typo
pulseaudio: add upstream status for pulseaudio-0.9.15's patches
hostap: add upstream status for hostap's patch
glibc: add upstream status for glibc's patch
glib-2.0: add upstream status for glib-2.0's patch
mtd-utils: add upstream status for mtd-utils patches
add upstream status for opkg's patches
mark add_vercmp.patch as inappropriate since the added function is not
used.
(From OE-Core rev: b0052e9467608cdc2e3b85f5b718e6b9c03d44ca)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
hostap: add upstream status for hostap-fw-load.patch
lrzsz: add upstream status for lrzsz's patches
bluez: add upstream status for bluez's patches
bluez-dtl1-workaround: add upstream status for COPYING.patch
libgsmd: add upstream status for gsm's patches.
gypsy: add upstream status for gypsy's patch
libpcap: add upstream status for libpcap's patches
ppp: add upstream status for ppp's patches
libtelepathy: add upstream status for libtelepathy's patches
telepathy-python: add upstream status for telepahty-python's patches
wireless-tools: add upstream status for wireless-tools's patches
wpa-supplicant: add upstream status for wpa-supplicant
zeroconf: add upstream status for zeroconf's patch
glibc: add upstream status for glibc's patches
dpkg: add upstream status for dpkg's patches
makedevs: add upstream status for makedevs's patch
opkg: add upstream status for opkg's patches
opkg-utils: add upstream status for opkg-utils's patch
minicom: add upstream status for minicom patches
rpcbind: add upstream status for rpcbind's patch
which: add upstream status for which's patch
clutter-gst: add upstream status for clutter-gst's patches
flac: add upstream status for flac's patches
gst-ffmpeg: add upstream status for gst-ffmpeg's patch
liba52: add upstream status for liba52's patch
libid3tag: add upstream status for libid3tag
libmusicbrainz: add upstream status for libmusicbrainz's patch
pulseaudio: add upstream status for pulseaudio patches
db: add upstream status for db's patch
neon: add upstream status for neon's patch
taglib: add upstream status for taglib's patches
libetpan: add upstream status for libetpan's patch
libopensync: add upstream status for libopensync's patches
libopensync-plugin-evolution2: add upstream status for its patch
libopensync-plugin-syncml: add upstream status for its patch
libsyncml: add upstream status for libsyncml's patch
empathy: add upstream status for empathy's patch
wv: add upstream status for wv's patch
xournal: add upstream status for xournal's patch
(From OE-Core rev: 0f9f0518ac46c2f2beb0224e881ff136f1603d33)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
uclibc does not have exp10() implemented so we obtain
same behaviour using pow()
(From OE-Core rev: 199e76cd3d3bafef189d5a82e65796fb4a0c6536)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use libc-uclibc override to cover all uclibc cases
inherit gettext class instead of adding gettext to DEPENDS directly
(From OE-Core rev: d33570f43cd9f0ff3182c5ed28ce721928074b8a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When souphttpsrc was added to gst-meta-base, the corresponding
dependency on libsoup was not added to gst-plugins-good, this
resolves that.
(From OE-Core rev: 7105e626bc77c6678a7dada381d20ad2676c8443)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add libgstsouphttpsrc library to support remote stream playing via
http/https protocols.
This solves the mp4 playing issue by regel from mediatomb file server.
(From OE-Core rev: f779c4d0960aff41fe9340b116a829f9be15e1ac)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Qemu-needed is needed for the qemu* machines to build, but needs alsa-lib
(From OE-Core rev: 31177e0d187c06c30dfb9abe3f2344da3afd643d)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable hal usage at configure time to avoid dependency on hal (which is
deprecated). Only affects "halelements" which is of no use without hal.
Fixes [YOCTO #810] and reverts changes from c6b0c5720fa.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Defaultly gst-plugins-bad will configured with option --enable-rsvg.
Besides, it will check if librsvg really exists by certain configure
code.
Therefore there will be a certain race condition that, during
librsvg's populate_sysroot, gst-plugins-bad's do_compile will find
some header files are still not exists though its configure says the
library is supported.
Explicitly add librsvg as gst-plugins-bad's dependency could solve
this issue.
This fixes [YOCTO #831]
(From OE-Core rev: 5b675f91b17eb9d01a4552506518cc0f7de4eba4)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When append "audio" to poky-qemu, emulated sound card like es1370 is
exported to guest. This patch install the kernel driver in the
poky-image-qemux86/x86_64 to use them.
[BUGID #751]
(From OE-Core rev: 95e7b7b280d8f7e699a949fa775a6846a256266c)
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libowl-av tries to use playbin2 defaultly, which needs uridecodebin
support from gst-plugins-base.
This fixes both [BUGID #615] and [BUGID #616]
CC: Edwin Zhai <edwin.zhai@intel.com>
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
gst-plugins-base requires libuuid, so add util-linux to DEPENDS.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Qing He <qing.he@intel.com>
The newer binutils recipe of version 2.21 has a fix for ld which avoids an
issue where weak symbols like pthread_cancel were causing linking to fail when
--no-add-as-needed parameter was passed to ld.
See more information here: http://bugs.debian.org/591405
This makes some of the fixes for breakage after gcc dso linking change
unnecessary and this is one of them.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
The libraries for linking are not determined automatically now. All
the needed libraries must be specified explicitly.
This patch fixes the issue for missing libpthread library in the linker
script.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Remove nofallbackfix.patch it as already in upstream. Remove
autoconf_version.patch as already have new version of autoconf and no inbuild
libltdl now.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
For these recipes the dependencies listed in RDEPENDS and RRECOMMENDS only apply to ${PN}
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
This reverts commit 06570b84e4.
These versions of gst-plugins-* already have been fixed upstream
for the make 3.82 problems, so this patch detects already applied
and bails
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Derived the recipe from openembedded.
For poky, we use the ffmpeg lib contained in the package, while
openembedded use the system ffmpeg library.
Removed the PATH_prepend since the latest version of gst-ffmpeg
install program will be called with "-s" unless expilcitly with
"make install-strip".
Update recipe metadata.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
There is a bug in pulseaudio uptream which uses new instructions on old
arm platform. So we keep arm version of pulseaudio unchanged.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Remove configure_fix.patch since the original logic is not exist in
upstream code.
Fix recipe metadata.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
* Added another patch from Gentoo/OE to allow package to build for
mips arches
* Added SUMMARY, HOMEPAGE, and SECTION fields
* Added source checksums
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
This is the next stage of recipe reorganization, in this stage
many recipes where moved to a new meta-demoapps layer since this
is more appropriate for demo usage then the core. Additional some
recipes were moved to meta-extras to indicate they may be depercated
at a future time.
A number of recipes were modified since dependencies need to be
corrected.
Signed-off-by: Saul Wold <Saul.Wold@intel.com>
The latest tremor has dropped its internal libogg2, which
gst-plugins-base is depend on.
Remove the "-DTREMOR" in gst-plugins-base Makefile.am to
fix the build issue.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
This is used to fix the following build failure:
checking for oggpackB_read... no
| configure: error: newer libogg version (1.1 or later) required
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Fixes [BUGID #501]
While building the poky-image-sato target, gst-ffmpeg failed when
it attempted to run altivec tests on the host. We can live without
this optimization, so the easiest fix is to simply disable it.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Modified DEPENDS and RDEPENDS in these recipes and tasks to make packages
which have potential license implications opt in through options in
poky/local.conf.
Signed-off-by: Saul Wold <Saul.Wold@intel.com>
Fix one parameter order issue for base_contains function,
which impacts glibc build under new gcc.
Add new judge code to determine whether <altivec.h> is needed.
This fixes the mpeg2dec build failure under new gcc.
Use O2 as the optimization flag to tinylogin as it will meet
segfault if compiled by gcc-4.5.0 when enable both frename-registers
and Os options. Use O2 instead.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Having one monolithic packages directory makes it hard to find things
and is generally overwhelming. This commit splits it into several
logical sections roughly based on function, recipes.txt gives more
information about the classifications used.
The opportunity is also used to switch from "packages" to "recipes"
as used in OpenEmbedded as the term "packages" can be confusing to
people and has many different meanings.
Not all recipes have been classified yet, this is just a first pass
at separating things out. Some packages are moved to meta-extras as
they're no longer actively used or maintained.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>