Clearly I didn't test this part of the code - lists don't have an "add"
method. Needless to say I have tested it now.
(From OE-Core rev: 063ed9058a14775f77e7875d4f6ef5719fa03f18)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a build-sdk command which is only available within the extensible
SDK that builds a derivative extensible SDK. The idea is recipes in the
workspace become a part of the new SDK - for example, this allows taking
a vendor provided SDK, adding a few libs and then producing a new SDK
with those included.
When normally building the extensible SDK, the workspace is excluded;
here we need to copy into the new SDK (renaming it in the process); the
recipes' task signatures become locked and thus the sources are no
longer needed, so they are removed along with the workspace bbappends
which would interfere with the locked signatures. Additionally we need
to just copy the configuration files (i.e. local.conf and auto.conf)
rather than filtering and appending to them since that work has already
been done when constructing the original SDK. The extra sstate artifacts
from workspace recipes are also determined and copied into the new SDK
in minimal mode (on the assumption that you won't set up a new sstate
mirror).
This reuses some code from build-image, so that needed to be
generalised to allow that.
Implements [YOCTO #8892].
(From OE-Core rev: 59e207ff6dd4b50a8905e14bc9292cf2794f4e7a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hyphens aren't allowed in python identifiers, so you shouldn't use them
in module names or they are more difficult to import.
(From OE-Core rev: e8f6db9436dfc923e236f2cbc08f357e3b24fd5d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"sdk_update" uses a variable newsdk_path, which was never declared.
This would cause the command:
devtool sdk-update <poky-sdk-latest>
to fail with an error:
NameError: global name 'newsdk_path' is not defined
The remedy is to declare newsdk_path as it was no doubt intended,
corresponding to the argument specifying <poky-sdk-latest>.
[YOCTO#9042]
(From OE-Core rev: 6ac589a4a9290665f8c5295e2e2a03a2b187b957)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add detection for npm modules and support for extracting the name and
version from package.json as is usually part of an npm module contents.
Note: this will likely only produce a buildable recipe if you use an
npm:// URL; simply pointing to a node.js source repository isn't going
to fetch the module's dependencies. It also doesn't set up the
shrinkwrap/lockdown automatically, so there is some room for improvement
later.
Implements [YOCTO #8690].
(From OE-Core rev: 41d0e4d75f13b53a6c1b6a8df9be4742be7534e0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for detecting a Linux kernel source tree and generating a
basic kernel recipe using meta-skeleton's linux-yocto-custom recipe as a
base.
Implements [YOCTO #8981].
(From OE-Core rev: 39cab544b80ca4450106c9ede3180929ba24703c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Detect kernel modules by looking for #include <linux/module.h>, and
handle the various styles of Makefile that appear to be used. I was able
to use this code to successfully build a number of external kernel
modules I found.
Implements [YOCTO #8982].
(From OE-Core rev: a85604f2eb2438b4caf0832c2ea15b5822f7e9a1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When importing the components during the "combo-layer init" with full
history and relocation into a destination directory, components with
empty commits were not handled because the "mv" command was invoked
with just one parameter.
Replacing that with a find/xargs pair avoids the problem and should
also fix the handling of filenames with special characters (in
particular spaces).
(From OE-Core rev: fd9d08b8ba512151615a03fda61a103760a0683c)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were creating the partition, mkswap'ing it, and then not dd'ing it into
place in the final image, as source_file wasn't being set for swap partitions.
This would result in a swap partition that couldn't be enabled on target until
mkswap was run.
(From OE-Core rev: 7580942a66f84c2120763c2d9665e2cec8e25138)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make this consistent with "devtool add" so that the user knows where to
find the new recipe.
(From OE-Core rev: 28fea4a104ba85aded2ecfe891e9bf997d72a103)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The PR value should be reset to the default when upgrading, so we need
to drop it from the newly created file.
(From OE-Core rev: 4acf8a6912106dd3da5ceee9e30ccce86211d04b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We aren't modifying the datastore copy here, so we don't need a copy at
all.
(From OE-Core rev: 9f05bf98d4dbcb991b684a2ab480c6638c6be292)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix several issues when extracting the new version source over the top
of the old one (when the recipe is not fetching from a git repo):
* Delete the old source first so we ensure files deleted in the new
version are deleted. This also has the side-effect of fixing any
issues where files aren't marked writeable in the old source and thus
overwriting them failed (harfbuzz 1.1.3 contains such files).
* Fix incorrect variable name in abspath statement that made it a no-op
(From OE-Core rev: 4f7595a514661f0e2418393286849a1cb6c46f0d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we do an upgrade from one tarball version to another we want to:
1) Check out the old version as a new branch
2) Record the changes between the old and new versions as a commit
3) Check out the old version with patches applied
4) Rebase that onto the new branch
Where we went wrong was step #1 where instead we checked out the old
version with patches applied as the new branch, which meant the rebase
didn't do anything and any changes made by the patches to files still in
the new version were wiped out.
(From OE-Core rev: a4f3e6d5f4c549e36cce1e18801a565a3a3c9b0a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the actual value of PV isn't in the name of the recipe (for example,
a git or svn recipe) there's no point trying to rename it. Additionally,
we already have the original filename, there's no need to guess it -
just pass it in.
(From OE-Core rev: e144db3650b4a7c0a59066621905f34a5400303e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were trying to move this from the current directory instead of the
path. Let's just use shutil.move() instead of shelling out to mv.
(From OE-Core rev: 60454a0ba154d6c777e0c2b05b887b4e4fcde986)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For recipes that specify SRCREV, the code here wasn't quite doing the
right thing. If the recipe has a SRCREV then that needs changing on
upgrade, so ensure that the user specifies it. If it doesn't, then it'll
be "INVALID" not None since the former is the actual default, so handle
that properly as well. Additionally an unset variable was being
erroneously passed when raising the error about the version being the
same leading to a traceback, so fix that as well.
(From OE-Core rev: 1d0f821371d1cb93e30fad86f0c20e38cb93b54b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recipename argument to devtool upgrade specifies an existing recipe,
so by definition the name will be valid (or it won't exist) - we don't
need to validate it ourselves, that's only needed for situations like in
devtool add where we're creating a new recipe.
(From OE-Core rev: 1e2bc7d861555a04350a87f19047efdc717046be)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make devtool upgrade consistent with devtool add/modify in defaulting to
sources/<recipename> under the workspace if no source tree path is
specified.
(From OE-Core rev: 8a952407b192313515e91570632446b6dff01665)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you for example ran devtool modify virtual/libusb0 without specifying
a source tree path, the default was <workspace>/sources/virtual/libusb0
which isn't correct - it should be using the mapped name i.e.
libusb-compat (in the default OE-Core configuration). Reorder some of
the code to ensure that the mapped name is used.
(From OE-Core rev: c51736df17da8e6e561dd5b7ce59cb08254da870)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As suggested by Khem Raj.
(From OE-Core rev: 36cc6b81d0281348a0f241a80ddd427745a6a678)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds functionality to allow creating subdirectories inside
lib/oeqa/selftest for all layers present in BBLAYERS. Like this, test
cases can be grouped into organized directories.
Addresses [YOCTO #7865]
(From OE-Core rev: 445b84456659ebb355149f6b0dca543b0bb2679c)
Signed-off-by: Costin Constantin <costin.c.constantin@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create config fragment if the user makes modifications to kernel config.
User may change .config e.g. by directly editing it or by running the
'do_menuconfig' bitbake task. Devtool generates one monolithic fragment
by simply doing a diff between .config and .config.baseline files in the
source directory. If either of these files is missing, the config
fragment is not gerenrated or updated. The output is a file,
'devtool-fragment.cfg' that gets added to SRC_URI in the recipe (as well
as copied into the 'oe-local-files' directory if that is present in the
source tree).
${S}/.config will be a symlink to ${B}/.config. We need to do this as
devtool is not able to access ${B} because ${B} is set in a .bbappend in
the workspace layer which is not parsed by devtool itself.
[YOCTO #8999]
(From OE-Core rev: 524da136e5b837a60682516ac08f3092c635e934)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Copy kernel config is copied to the source directory at a later phase in
_extract_source() so that it gets copied when devtool sync is done, too.
(From OE-Core rev: ff895be7a46c4b3b1b791e5387490d90bb34fce2)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Coverage in oe-selftest currently requires to create or modify
a sitecustomize.py file according the coverage tool setup instructions
(http://coverage.readthedocs.org/). This file has to be located in
the system's python folder, which is not a good solution since this
folder is not accesible to non-privileged users.
The best solution so far is to create this file in the home directory.
This is implemented by creating the temporal file in the user site
default folder.
[Yocto #8930]
(From OE-Core rev: 3f9b1658d745b536eff1017b2c74a9dff46b6f4a)
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When --coverage is used, oe-selftest gathers coverage data from the testcases
executed. The command lacks a way of filtering which files to gather coverage
data from.
This patch adds three options to specify which files should be considered.
The --coverage-source option specifies folders, while --coverage-include and
--coverage-omit specify patterns to have an extra level of filtering.
Some examples:
1. oe-selftest --run-all-tests --coverage
Gathers coverage data from the default poky folders
2. oe-selftest --run-all-tests --coverage --coverage-include /home/me/poky/scripts/*
Gathers coverage data only for the files located under '/home/me/poky/scripts'
3. oe-selftest --run-all-tests -coverage --coverage-omit /home/me/poky/meta*
Gathers coverage data. Files inside all the folders starting with 'meta' under
'/home/me/poky' are omited
4. oe-selftest --run-all-tests --coverage --coverage-source /home/me/poky/bitbake
Gathers coverage data only from files inside the folder: '/home/me/poky/bitbake'
[Yocto #8920]
(From OE-Core rev: 923481c7d8c09ed9b03109cf4debcc6b07845c59)
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"poky" is the reference distribution for the Yocto Project. This renames
the layer within the meta-yocto repository to meta-poky, better matching
what that layer contains.
A layer.conf file is left behind as this is the only way which allows
existing builds to migrate safely to the new name. It will be removed
at some future point.
This change requires the corresponding OE-Core change to handle the
migration and the changes to the infrastructure to support this.
(From meta-yocto rev: d0c88df2e14672fca4ebbde93c5efbcd0e4fa9b6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Package names are actually case sensitive near as I can tell, so we
shouldn't be lowercasing them everywhere.
* Look for CMake packages in pkgdata and map those back to recipes,
so we aren't dependent on the hardcoded mappings (though those are
still preserved).
* Avoid duplicates in the unmapped package list
(From OE-Core rev: 2ddad52ccca07245eea43d9b844c6c7d4b667ca3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a means of extending the dependency extraction for autotools and
cmake.
Note: in order to have this work, you need to have an __init__.py in the
lib/recipetool directory within your layer along with the module
implementing the handlers, and the __init__.py needs to contain:
# Enable other layers to have modules in the same named directory
from pkgutil import extend_path
__path__ = extend_path(__path__, __name__)
(From OE-Core rev: 915dea9f89cd737e5ba167c384e8d314c5c23c49)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I should have adjusted this in OE-Core commit
80a44e52609a89d9ffe816181ae193af491c06ac where the behaviour changed.
(From OE-Core rev: 13409a2b899bb74b8060c840b8c7ef8759d099cb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If files would be overwritten by the deployment, preserve them in a
separate location on the target so that they can be restored if you
later run devtool undeploy-target.
At the same time, also check for sufficient space before starting the
operation so that we avoid potentially failing part way through.
Fixes [YOCTO #8978].
(From OE-Core rev: a2da55712691bcf1066c53d813107d75213d6b10)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you want to put the target device back to exactly how it was before
devtool deploy-target started poking things into it, then it would make
things easier if you didn't have to figure out which recipes were
deployed. Now that we have the list stored on the target we can
determine this reliably, so add a -a/--all option to undeploy-target to
undeploy everything that has been deployed.
One of the side-effects of this is that the dry-run functionality for
undeploy-target had to be reimplemented to actually run the script on
the target, since we have no way of knowing what's been deployed from
the host side. We don't need to do the same for deploy-target though
since we know exactly which files will be deployed without referring to
the target.
(From OE-Core rev: 41fed83060f0041e14e455d1446397bda277d953)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When running devtool deploy-target, we save a list of deployed files,
and this list is used by devtool undeploy-target (or the next time
deploy-target is run if the list is present, in case any files have been
renamed or deleted since the first time). We were writing this file to
the host, but it makes more sense to write the list to the target
instead, so that if we for example swap in a different board, or switch
hosts, things will work as expected.
In order to do this properly we have to construct a shell script and
ship it over to the target so we can run it. The manifest is written out
to a hidden directory in the root (/.devtool).
Fixes [YOCTO #7908].
(From OE-Core rev: a16a0c9334b785e2df896266c8911a2c7a1806b8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Get the default value for updateserver from the configuration file and
show it in the help; also only make the parameter optional if it's
specified. This means we can also drop the check in the function as
argparse will then ensure it's specified if there's no config setting.
(From OE-Core rev: 82497bde58fc8bdae8d8acfbf025a1a90b14cc3e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a long description used when running --help on the specific command.
(From OE-Core rev: eb7787d1652fd84a149fd394969f4f1099406051)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Naming these as "optional arguments" is perhaps slightly confusing since
some of the positional arguments might also be optional; in addition
it's rare (though possible) for options to be mandatory - up until
recently we had a recipetool option (-o) that was mandatory. It's not
perfect, but change it to "options" so it's at least a bit more
appropriate.
(From OE-Core rev: 55e675de6191bf7eccd26df29189f2a6faa40a20)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The listing of subcommands in the --help output for devtool was starting
to get difficult to follow, with commands appearing in no particular
order (due to some being in separate modules and the order of those
modules being parsed). Logically grouping the subcommands as well as
being able to exercise some control over the order of the subcommands
and groups would help, if we do so without losing the dynamic nature of
the list (i.e. that it comes from the plugins). Argparse provides no
built-in way to handle this and really, really makes it a pain to add,
but with some subclassing and hacking it's now possible, and can be
extended by any plugin as desired.
To put a subcommand into a group, all you need to do is specify a group=
parameter in the call to subparsers.add_parser(). you can also specify
an order= parameter to make the subcommand sort higher or lower in the
list (higher order numbers appear first, so use negative numbers to
force items to the end if that's what you want). To add a new group, use
subparsers.add_subparser_group(), supplying the name, description and
optionally an order number for the group itself (again, higher numbers
appear first).
(From OE-Core rev: e1b9d31e6ea3c254ecfe940fe795af44761e0e69)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we didn't make any changes to the file then there's no point warning
the user that we have done.
(From OE-Core rev: 391b9ba30d802ac420ddf382588e03e718861c01)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If files had been created next to the recipe (for example devtool add,
edit the source and commit and then devtool update-recipe), running
devtool reset failed to preserve those files and gave an error due
to trying to rmdir the directory containing them which wasn't empty.
Fix the preservation of files in the "attic" directory properly so
we catch anything under the directory for the recipe, and replicate
the same structure in the attic directory rather than slightly
flattening it as we were before.
(From OE-Core rev: bbe63eb97ae7f78959f117d6066ef821c4da1c77)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Looking at Chris Larson's code for starting the user's editor for
"recipetool newappend" it was slightly better than what I wrote for
"devtool edit-recipe" in that it checks VISUAL as well as EDITOR and
defaults to vi if neither are set, so break this out to its own function
and call it from both places. The broken out version passes shell=True
however in case it's a more complicated command rather than just a name
of an executable.
(From OE-Core rev: 184a256931e8cdc7bea97a905c4e67a435964de0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no -N/--name option for devtool, that's a recipetool option -
with devtool you just specify the name as a positional argument.
(From OE-Core rev: d2bc0cba5ca8a7220ffe1ef96acf856fe972ce7c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user specifies --basepath on the commandline, only the directory
specified should be searched for .devtoolbase. Otherwise when --basepath
is a child of the sdk directory, .devtoolbase will always be found and
devtool will only show options meant to be used within an sdk.
(From OE-Core rev: 3bb07c61220b89384a76c745e33be37aad5095c0)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have an issue with PAT handling on older processes with limited PAT bits,
see the patch description for the full problem. This replaces the runqemu
workaround with a kernel patch until we can get the kernel trees sorted
out and discuss a proper fix with upstream. It should be safe everywhere
so is applied unconditionally.
(From OE-Core rev: e00f0794a535c8e68ae1c87c8b01dd65645d570b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Processing of this option was lost during recent change of
wks parsting. It was discovered during the work on booting
wic images under qemu. Now, when -use-uuid is fixed it's
possible to specify root partition by partition uuid.
This will be done in the following commit.
(From OE-Core rev: b4882e0b84d7fd4c85ee95386e94722485eafc2b)
(From OE-Core rev: 73e9e3f150bf2de9b27c2ccc73e3dee334ee73fe)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wic images should be boot as is, without pointing qemu to the kernel
binary. Current code doesn't use kernel, but sets KERNEL variable and
shows kernel path in the console output. This can confuse users.
Changed runqemu and runqemu-internal code to avoid setting KERNEL
variable and show kernel path.
(From OE-Core rev: 474caa7ed5ff05caa5d49d270b283882fa616ed1)
(From OE-Core rev: 35e776e00cce25f2c9c45500612fb66022ec4739)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Quemu should be able to run wic images this way:
runqemu <machine> <image recipe> wic
Tested with 'runqemu qemux86-64 wic-image-minimal wic'
(From OE-Core rev: 8716be799949cb8bde7fa49cbea61312a3a93bb7)
(From OE-Core rev: dd42931bf99b8bbd4ad452b3941d957f41b81796)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use "out of" rather than "from" in the output.
(From OE-Core rev: c712529030c71b45bb8ae647c17319c2647aedff)
Signed-off-by: Jan Sarenik <jajomojo@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the upgrade of qemux86 to 4.4.1 we're seeing PAT issues when
starting the X server. We need to fix the problem but the failing
sanity tests mask out other issues and we need a workaround.
Merge this for now until we can figure out the full issue. This is
better than changing the kernel defconfig or reverting to old
kernel versions.
(From OE-Core rev: 2749ba318bf322cb5014689532372473004e92b9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you specify a local directory which happens to be a git repository
with an origin remote (and it is in fact remote), we can use that for
SRC_URI as implemented by OE-Core revision
b143d414846854dc8b3e0a47358daf5646eded38, however we also need to set S
if the recipe is going to be of any use fetching from that SRC_URI
later.
(From OE-Core rev: 8bbbd2d63f1bc752f9a30054a089dc2caf5fd84c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton
Juro Bystricky
Patrick Ohly
Christopher Larson
Costin Constantin
Markus Lehtonen
Humberto Ibarra
Richard Purdie
Randy Witt
Ed Bartosh
Jan Sarenik