Apparently, when opkg/dpkg and run-postinsts are installed in the same
time, opkg/dpkg postinstall overwrites the run-postinsts link in rcS.d.
This will make run-postinsts script useless and the delayed postinstalls
will not be run.
This issue happens only when 'package-management' is disabled and, in
the same time, dpkg/opkg ends up in the image: either pulled by some
dependency or manually installed.
With this patch, both opkg/dpkg and run-postinsts scripts will run but
the former will silently fail because the package metadata is removed from
the image since 'pacakge-management' is disabled.
[YOCTO #4484]
(From OE-Core rev: 882da38f226acc40c041155218549edad461b7d7)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The connman init.d script tried to ignore all the network interfaces
if NFS root is configured. We should only ignore the interface
that is used by NFS root.
[YOCTO #4587]
(From OE-Core rev: 1838671b832015ae28c8c101e8b20afbbf4b3c98)
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the code was refactored to address review comments, the wrong version
was sent to the community. Replace the $1 with ${target_rootfs}
Fix identified by: Yue Tao <yue.tao@windriver.com>
(From OE-Core rev: a04f4fe8db425f0ea87a67b5c72d61816b8d53e2)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If there is a package A (TUNE_PKGARCH) which is depended upon by B which
is MACHINE_ARCH and you build B for machine X, then Y, the user isn't
present in the sysroot for machine Y since the useradd code is never
triggered.
The change ensures the code does get triggered and the user is present.
[YOCTO 4739]
(From OE-Core rev: 5871337da49f8cd1eaf53f7cd0aacc026dc7bcdb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch aims to fix the following two cases for the INITRAMFS generation.
1) Allow an image recipe to specify a paired INITRAMFS recipe such
as core-image-minimal-initramfs. This allows building a base
image which always generates the needed initramfs image in one step
2) Allow building a single binary which contains a kernel and
the initramfs.
A key requirement of the initramfs is to be able to add kernel
modules. The current implementation of the INITRAMFS_IMAGE variable
has a circular dependency when using kernel modules in the initramfs
image.bb file that is caused by kernel.bbclass trying to build the
initramfs before the kernel's do_install rule.
The solution for this problem is to have the kernel's
do_bundle_initramfs_image task depend on the do_rootfs from the
INITRAMFS_IMAGE and not some intermediate point. The image.bbclass
will also sets up dependencies to make the initramfs creation task run
last.
The code to bundle the kernel and initramfs together has been added.
At a high level, all it is doing is invoking a second compilation of
the kernel but changing the value of CONFIG_INITRAMFS_SOURCE to point
to the generated initramfs from the image recipe.
[YOCTO #4072]
(From OE-Core rev: 609d5a9ab9e58bb1c2bcc2145399fbc8b701b85a)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add packaging for libgfortran and libquadmath as well as tweak the packaging
for libmudflap since it was broken.
(From OE-Core rev: 8a726d14a345ef35c6d8d8e369bf3691cee879bf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use a file object to generate a our test file instead of calling `dd`;
removes dd's output from testimage.log, keeps unittest output clean.
Also remove unused imports.
(From OE-Core rev: 6ac48ffbab29a37b0eada533191878aeae3c91f0)
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add ssh_options to be used, the same, by ssh and scp:
Decrease LogLevel to ERROR, to suppress warnings (e.g. ssh host
verifications, two warnings in case of having openssh with hpn patches);
We no longer presume that the first line is a warning.
(From OE-Core rev: 1f18d04eec03e586134b6d77ca1c6151c22353dd)
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set longMessage to True for all tests derived from oeRuntimeTest, in
order to have somewhat info on assertions with cryptic or no messages.
(From OE-Core rev: e5196ebd6c652431a3b80cdc9f60b752401314f4)
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These links were moved to the lsb package because lsbsetup was to be
removed. Subsequently an earlier patch that moved them to chkconfig was
also merged. This results in duplicate installations that generate a
warning when building core-image-lsb under DISTRO=poky-lsb which enables the
linuxstdbase feature.
(From OE-Core rev: 77a0b904e18688ecf81a35544f3a5d6ba0aa61a8)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since its initial commit from the classic OpenEmbedded repository
in 43e94412c4, serialization was
commented out, reportedly due to some issue with powerpc in the
boost version 1.36. In the classic OpenEmbedded repository,
serialization has been added again since version 1.4x.
The commit removes the outdated comment and adds serialization to
the BOOST_LIBS after testing `bitbake boost` and bitbaking some
applications using boost from the meta-ros layer for qemuppc.
(From OE-Core rev: a193d868a0c01a2998adb3e6eec9fc2748cca888)
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
eglinfo is a small utility for printing out information about EGL as well
as about its client APIs, OpenGL / OpenGLES 1.x / OpenGLES 2.x / OpenVG.
Recipe originally by Carlos Rafael Giani <dv@pseudoterminal.org>.
(From OE-Core rev: a8835cc014d761bf18a420b48c7c61cdfeded552)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new build system class for waf.
(From OE-Core rev: 2b148b9e73f05af33ed1437358fa5322cf364651)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sysklogd package hasn't got systemd support yet. So in case of
a systemd based system, the commands and corresponding configuration
files should have a lower priority than that of the busybox's syslogd
and klogd utilities. These two utilities from busybox have internal
systemd support if CONFIG_FEATURE_SYSTEMD is enabled. And that config
item is enabled by default.
[YOCTO #5066]
(From OE-Core rev: 45d18a1b6bcdc56d252b289d0d304b26799943b0)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default, busybox has CONFIG_FEATURE_SYSLOGD_CFG enabled, but it
doesn't ship a configuration file.
This patch adds a configuration file (/etc/syslog.conf) to the
busybox-syslog package. This configuration file mainly serves as a
placeholder now.
The advantages of this change are:
1. Make the users aware of the fact that the /etc/syslog.conf file
will actually be parsed by busybox's syslogd utility. And configuring
that file will change the logging behaviour.
2. In a systemd based system, this file will prevent the same configuration
file provided by the sysklogd package from messing things up.
[YOCTO #5066]
(From OE-Core rev: b7f6688f0700a1575037362af7a8ca94dccce471)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
acpid: print message if rule directory is inexist
If rule directory is inexist, the acpid initscript will exit with success,
but the daemon will be not running.
Print message in this case to tell user that the daemon is not running.
(From OE-Core rev: 66a5d15cecdf4bd267dbae5f771ebf3768232481)
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
acpid: install events directory at default.
If rule directory "${sysconfdir}/acpi/events" is inexist,
the acpid initscript will exit with success, but the daemon will be not running.
(From OE-Core rev: 8a1c6e465a562b4653f4fb4af3a3845775785485)
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemu.bbclass adds PSEUDO_UNLOAD=1 in qemu_run_binary to avoid reference to
pseudo functions that may not exist in the target environment. This patch
detects the addition of that variable within the environment to which the
call applies, even if not present in the parent environment.
As a side effect it fixes a memory leak.
[YOCTO #4843]
(From OE-Core rev: 9ea32ef507c914f906b3dcc0bb29813a4e0dacba)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemumips* (aka mti-malta32/64) still need to revert the following in
3.10:
"Input: i8042-io - fix up region handling on MIPS" (commit 197a1e96)
It was understood that this was no longer necessary, but X based boots
still suffer the issue.
(From OE-Core rev: 57483db524cdf7c42af48bbaee163f5396294ac0)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the BSP SRCREVs for the 3.10.10 korg -stable release.
(From OE-Core rev: 9171dc4bb56109d65eeb1d1a434b6e311c89b173)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 3.10 yaffs2 refresh caused several build errors. One due the single kernel
version support being incomplete, and two others due to core kernel changes
creating incompatbilies with the yaffs2 code.
The following three commits fix the issues.
b76f445 yaffs2: disable procfs support
ecfe5ed yaffs2: convert to kuid_t and kgid_t
fa8efc9 yaffs2: restore multi-kernel version functionality
bumping the SRCREVs for all BSPs to import the fix.
(From OE-Core rev: 5799df791043bd77c0f31e6068ab99e21d6ad25e)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We will see the following warning by accident:
$ bitbake nativesdk-glib-2.0
WARNING: QA Issue: nativesdk-glib-2.0-dbg: found library in wrong location:
/opt/poky/0.5.5/sysroots/x86_64-pokysdk-linux/usr/share/gdb/auto-load/opt/
poky/0.5.5/sysroots/x86_64-pokysdk-linux/usr/lib/libglib-2.0.so.0.3600.4-gdb.py
There are two '/opt/poky/0.5.5/sysroots' in the path when the warning
comes, this is what we need since glib-2.0 has done this intentionally
in its configure and Makefile.
This is because the configure script uses the:
ABS_GLIB_RUNTIME_LIBDIR = "readlink -f $libdir/$with_runtime_libdir`"
to figure out the abs dir, so if
/opt/poky/0.5.5/sysroots/x86_64-pokysdk-linux/usr/lib/ exists , there
would be warning, otherwise no warning.
We can change the "readlink -f" to "readlink -m" to fix the host
contamination issue.
Another fix could be:
ABS_GLIB_RUNTIME_LIBDIR =""
But this is much more like a workaround.
[YOCTO #5099]
(From OE-Core rev: 3e660ec01cc62c57b379b151e43c7952e97a1c2b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gcc recipes reference this however we account for it in the work
directory paths and we don't want recipes depending on the value changing.
This avoids unecessary rebuilds when switching SDKs.
(From OE-Core rev: 6cdcc543ce8f532a4f66246114241b43821a111e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
shlibs dependency calculations on darwin we not functioning correctly, we
need to process the filename without the complete path. If we don't,
"." characters in the path cause problems.
(From OE-Core rev: 07e697d651178a84007123181fca38e4d98ae0e9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The create_wrapper functions of utils.bbclass cause implicit
dependencies on bash, which may not be suitable for deployment on
target. Besides, the wrapper doesn't seem to be necessary on target.
(From OE-Core rev: 2ca72d35e839a0fa24d33bf75343f187792f4e2c)
Signed-off-by: Olof Johansson <olofjn@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't start the http server on 0.0.0.0, listen on host ip (end of tap interface) only.
Also use the timeout option (default is 300s for ssh commands) for all the commands
run in this module (mostly because smart update timeouts on mips).
(From OE-Core rev: 8c272641ef3e8410f331ca4133d28dea8f36e4f4)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PulseAudio's GTK+ support is limited to a test case and automatic icon name
population for applications. This is too limited to enforce GTK+ 3 on all
builds, so disable it by default.
(From OE-Core rev: 619e63946fef32995363981aab288fc669e8ac04)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The do-autoreconf patches only change generated files. We run autoreconf ourselves
so we don't need these patches. Worse, they cause failures since the do_patch
task can't rerun after configure since the files change and the patch is no longer
clean.
Drop the patches since we don't need them.
(From OE-Core rev: 37e9a01d38892e8a6fd225854e5b8cc332a5f2ea)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using the recently fixed out of build directory bitbake invocations, I was
puzzled why bitbake seemed to be pausing. The reason was due to running the sanity
tests each and every time. This was due to current working directory assumptions
within the sanity test code. Fix this to use TOPDIR.
(From OE-Core rev: 1cdc1b37b840bda961258cf2bfb2f75331bdb310)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These have been deprecated for a long time, convert the remaining
references to the correct modules and prepare for removal of the
compatibility support from bitbake.
(From OE-Core rev: 6a39835af2b2b3c7797fe05479341d71a3f3aaf6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We run the ping test as soon as we reach the login prompt.
But sometimes (seen in sato systemd) we end up with link down/link up stuff like:
qemux86-64 login: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
The logic behind ping -w 30 -c 1 was to wait at most 30 seconds
for at least one reply, but there is a catch: reply doesn't seems
to be echo reply but any reply (non-reply means loss not network error)
ping's man page:
-w deadline
Specify a timeout, in seconds, before ping exits regardless of
how many packets have been sent or received. In this case ping
does not stop after count packet are sent, it waits either for
deadline expire or until count probes are answered or for some
error notification from network.
Just when the link up/link down happens ping returns:
From 192.168.7.1 icmp_seq=1 Destination Host Unreachable
--- 192.168.7.2 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
and exits sooner than the 30 seconds timeout.
This patch should do what was originally intended (wait at most
30 seconds for at least one reply).
(From OE-Core rev: 56d144fd22d37189e49cdf3032afb00f0be469c6)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are back ports of 2 patches from upstream to address
CVE-2011-4944
CVE-2013-4238
(From OE-Core rev: 4606eab53e8eff57d6369ea20a5ea63916ea3ea7)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These patches are backported from upstream since it might be risky to update right now
They address the following CVEs
CVE-2012-6329
CVE-2013-1667
(From OE-Core rev: b6c286c447e50fe499f03b64c6be80ac18504265)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add dependency on lzo acl e2fsprogs to fix the below building failure
1. commit b268a417259b9[add lzo compression support to restore] needs lzo
cmds-restore.c:30:25: fatal error: lzo/lzoconf.h: No such file or directory
2. btrfs-tools includes <sys/acl.h> which is provided by acl
btrfs-convert.c:32:21: fatal error: sys/acl.h: No such file or directory
3. btrfs-tools always needs e2fsprogs
btrfs-convert.c:44:28: fatal error: ext2fs/ext2_fs.h: No such file or directory
(From OE-Core rev: 51bb56a19f03e341a0b46199dddbbc3e9b209904)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* http://gcc.gnu.org/bugzilla//show_bug.cgi?id=57717#c7
* fix the segfault issue of dd on e500v2 targets
Since double-float is disabled for e500v2 targets build due to ICE of gcc-4.8.1,
accordingly %Ld format of sprintf is disabled.
Address Bug 4910 - [p1022ds]urandom: segmentation fault
(From OE-Core rev: a4fefac26d91bc56d5d28e1c9973a189d2509d45)
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fftw is autodetected from sysroot, add PACKAGECONFIG to make it deterministic
(From OE-Core rev: 5e00319ea942764ed2e7d6bc8c74e5d48166231b)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes the following configure error:
configure:23490: error: radeonsi and r600g require libelf when using LLVM
(From OE-Core rev: 43e7f168c84128b5d48bbfde9d6c07f2fb656b00)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The incorrect validation prevents connection to the NAP service on another
device.
(From OE-Core rev: 895a0840e82ddfd05c4441b7f8f358e27e6cb38a)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was never a particularly useful browser and is a dead codebase, retire
it and suggest midori instead.
[YOCTO #2318]
(From OE-Core rev: 3883d2cb03fb79fa39a7d85505c79784a996f178)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recently syslog behaviour changed for systemd images (log
it's in a buffer not in /var/log/messages), account
for the new stuff.
(From OE-Core rev: 32576c4cc1621fa3013eac66c7caaa1e1fd14995)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, it tries to run ./libtool, not the sys-prefixed libtool, which
fails, resulting in dynamic modules being disabled, which in turn results in
compiling the immodules directly into the gtk+3 library.
I tried switching it to using $LIBTOOL rather than hardcoding the path, as
LT_INIT sets LIBTOOL, but it didn't work, I didn't have time to dig further,
and this gets the job done for now.
(From OE-Core rev: f74e456772fc80c2333fbdf57c629a18412375e8)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When qemu doesn't start or runqemu errors out
(some wrong option passed or sudo needs a password for setting tap) we
want to display the output but oe-core commit 9de7fe11967576f4a8b24e653c6b9a02e5f6d85b/
poky commit 51588936d4
changed the kill method and broke this code, so let's fix it.
(From OE-Core rev: 923d4bd548911caa0b419c10905895af1e8e7026)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update lttng-ust to version 2.2.1 to correspond to the LTTng 2.2
"Cuda" - Tracer toolchain stable release.
This also removes all the local lttng-ust patches, which are now
upstream.
(From OE-Core rev: 3f856556972617560b24cc86bfab027bed83bd49)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update lttng-tools to version 2.2.3 to correspond to the LTTng 2.2
"Cuda" - Tracer toolchain stable release.
(From OE-Core rev: 303abf7f2d8e79e8d14ce5b9aff287347aae43be)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recipe builds the two utils which are unpackaged.
(From OE-Core rev: a8212a5170940b9ba9ca7a594b65939b06aac86c)
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Laurentiu Palcu
Jukka Rissanen
Mark Hatle
Thomas Fitzsimmons
Jason Wessel
Richard Purdie
Mihai Lindner
Peter A. Bigot
Lukas Bulwahn
Ross Burton
Chen Qi
Bian Naimeng
Roy.Li
Bruce Ashfield
Robert Yang
Olof Johansson
Stefan Stanacar
Saul Wold
Jonathan Liu
Chunrong Guo
Jackie Huang
Christopher Larson
Tom Zanussi
Andrea Adami