This file was replaced by a release-specific file named
"kernel-overview-3-denzil.
(From yocto-docs rev: 85220f16ce10086372f9d81c61cb4e3eb40d52e4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dev-manual/dev-manual-model.xml: The Bare Clone and Copy of the Bare
Clone figures are out of date for denzil. These needed to be
re-done so they use "linux-yocto-3.2.git" and "my-linux-yocto-3.0-work"
as the root names. This presents a Makefile issue when making the
denzil and pre-denzil versions of the manuals. Whenever you use a
different figure for a different release, you need to involve the
BRANCH variable in the Makefile. This is necessary because you are
using different figures in the generated tarballs. The set of figures
could be unique to the release. The outdated figure is
"kernel-overview-3.png" and will eventually be removed (later commit).
I created a new figure named "kernel-overview-3-denzil.png" and used
that in the dev-manual-model.xml file.
documentation/Makefile: I updated the Makefile to test for a
"denzil" release build and if so include the new file in the
generated tarball. This commit adds the new .PNG file as well.
Fixed the Makefile so that if you don't supply a BRANCH value, it
uses the latest figures (denzil).
(From yocto-docs rev: b3550d7640343cd5459efb04c591b81a1e41bc1b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the Note wording to work with the list and not be specific
to a number of supported kernels.
(From yocto-docs rev: 04b941264c001fc2f8e105637436b8d95a770357)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The list specifically named four kernels supported. I changed it so
it would say "several kernels".
(From yocto-docs rev: 8134eae4bce85e18a4402606e2cac6cb422cf0cf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several things out-of-date for step five of the BSP Creation overview.
(From yocto-docs rev: 6bf1c93315c2fe604dbe468a29d9e2159bf7aceb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The link and wording to the YP Downloads page on the website was
wrong. Fixed it up.
(From yocto-docs rev: 191856e4441bcea078868d22d019f4f1cdd62512)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added more detail to the pathname for the example
formfactor_0.0.bbappend file.
(From yocto-docs rev: 4bd9ac9f189689ddb8806c750545223e1e55cd4b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed a reference to Yocto Project Files and provided a link.
Put in an updated version of the meta/recipes-bsp/formfactor/
formfactor_0.0.bb file in the example.
(From yocto-docs rev: 031113db6d67beaee2e4f8225c7d4d2bc9380b05)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated various shell output examples created from cloning various
Git repositories, etc.
(From yocto-docs rev: 76024b2648c383bf19e6fee81d54c6a992e8d593)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the shell output example when user creates a bare clone
of kernel. We use linux-yocto-3.2 here.
(From yocto-docs rev: 69e3aa7a42d03cff23379432f5d1b496157d5c0d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example that creates a local branch based on a release tag
in the "Repositories, Tags, and Branches" section was not optimal.
Darren Hart informed me that naming a local branch the same name
as a tag confuses Git. Plus, the "-b" option was mis-placed.
Renamed the local branch to have "my-" in front of it and moved
the "-b" option earlier in the command.
(From yocto-docs rev: 29f4ea267ef687431e09eca4634fcb6cc48a6f81)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example in the "Repositories, Tags, and Branches" section that
creates a local branch that tracks the upstream branch is incorrect.
The syntax should be "git checkout -b &DISTRO_NAME; origin/&DISTRO_NAME;
Fixed it.
(From yocto-docs rev: ec80d43ad97370771c9cd7f7e6a4637db5f80e9b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added Hob and Build Appliance to the list of other stuff the user
might want to reference.
(From yocto-docs rev: 4c94654e53e422e5e0a54476e3ca88e682f177af)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Better wording for the role of BitBake. Updated shell output for
the clone of poky.
(From yocto-docs rev: eab184de2bd2b22def9dbe0c93b153ec9334402b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As suggested by Paul Eggleton and Richard Purdie, the example that
describes another method for creating a cusomt image was modified
so that it is based on an existing recipe instead of requiring a
new image.
Reported-by: Paul Eggleton <paul.eggleton@linux.intel.com>
(From yocto-docs rev: 65287ca135422a588d799143d93ccd4d058684ff)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After some discussion from Song and Richard, the dates in the
manual revision table has been updated to "April 2012" for the
1.2 release.
(From yocto-docs rev: b3fc2ec7c5aedb8ea0a2d502bdcd7e8f4092ed96)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I did a quick and dirty scrub over the manuals for the strings
"1.1" and "edison". I found some instances that were not properly
variablized. Also, discovered some references to the
linux-yocto-3.0-1.1.x. All but one instance of this needed changed
to linux-yocto-3.2.
(From yocto-docs rev: 620fb4b7626defcefc8a039de09ae4599ee7f454)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Five tables updated for the five manuals that have the tables.
Used "May 2012" as the date.
(From yocto-docs rev: 0d4d46ba300c07ff9c73186506be5b409bef9d1b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kernel26 is now obsolete so remove mention of it from the docs.
Removed from docs.
(From yocto-docs rev: 7b9da106d746192f802095584b04e3ee8347eabd)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A reference to meta/recipes-sato/tasks/task-poky.bb is made as a good
example of a task; however, this file / recipe doesn't exist. I
replaced it with meta/recipes-core/tasks/task-core-boot.bb, which I
think is a both useful and basic example to consider.
(From yocto-docs rev: 977877efa7781dd00c53cfa914dd710de7d934a1)
Signed-off-by: Robert Cochran <yocto@mindchasers.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1980].
Changed MULTILIB_IMAGE_INSTALL to IMAGE_INSTALL in the multilib
example. This variable is no longer used.
Reported-by: Matthew McClintock <msm@freescale.com>
(From yocto-docs rev: dfcbecf945b19e559b39b5824dc6b8bb37c18702)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Example corrected.
(From yocto-docs rev: 844ffad1e3b998d62ea7c10273785d710dc3541e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1888]
Per Darren Hart I swapped in the real example and added some text
explaining what the user needs to do if their source is from a
tarball.
Reported-by: Darren Hart <darren.hart@intel.com>
(From yocto-docs rev: a1991f0b6f32a0a296ae4d115a834ed61042720b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed title pre Richard.
Reported-by: Richard Purdie <richard.purdie@intel.com>
(From yocto-docs rev: 2ec1368c4bdf5d61e3a7d60d3293ba878939321d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some edits to the text of this moved section.
(From yocto-docs rev: 69ba05bbdc8a6fb74efdfbb3214a562e564f5a68)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Per Richard Purdie's suggestion, I moved the discussion on using
BBMASK out from the "Customizing Images" section and placed it into
a section of its own titled "Excluding Packages from the Build."
(From yocto-docs rev: edb01b30779117f92e710b8afefa9a5d8a3e78fa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Placed the "Customizing Images" section in front of the
"Adding a Package" section.
Reported-by: Rudolf Streif <rstreif@linuxfoundation.org>
(From yocto-docs rev: 68a7ef421b9b66cc7f0a2180c1ef17c8c4ec2ed4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There needed to be an entry in all the manual history tables
that indicated this version of the manual is for 1.2 but is
WIP.
Reported-by: Rudolf Streif <rudolf.streif@linux.com>
(From yocto-docs rev: 6792b88af4f0171cfc84e4d77bda871d4af3d36c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Old link to POKY_EXTRA_INSTALL. I changed to
CORE_IMAGE_EXTRA_INSTALL.
(From yocto-docs rev: 8c8308025443e2fd061faa03fe4f6245c58603a5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added information about Hob to the introduction part of this
chapter. The chapter is going to have a section that introduces
and speaks a bit about the Hob.
(From yocto-docs rev: dd98b3132ff4660397c37a223af8c4c2835a5276)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added more information to the YP Term "Append Files."
(From yocto-docs rev: e1a7e9b0a790d394e237a0972140107d11178408)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Put in a link to reference another example of using a .bbappend
file.
(From yocto-docs rev: b5a5433506adfe46276584e51dc19fc153ea098d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed text that described how a config file was referenced.
(From yocto-docs rev: 29846fcb4fd6f90452023e1f627ef76f1a056ac6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to better describe what a .bbappend file is.
(From yocto-docs rev: 81527358615c229a9161568a30785221c9f081ff)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided a clearer full name for .bbappend files.
(From yocto-docs rev: 4ee07af442c26aa06a6b295df758f41838b407df)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits to the BSP Guide, the Development Manual, and the
Kernel Manual to address [YOCTO #1717], which noted confusion
over the kernel manual when a user was trying to find kernel
configuration information.
The fix for this bug involved several areas. I had previously
created a new section called "Kernel Configuration" in the kernel
manual and "Configuring the Kernel" in the YP Development manual.
There were several rounds of feedback from Bruce Ashfield.
This commit represents the final touches on the three manuals to
address the bug.
Fixes [YOCTO #1717]
(From yocto-docs rev: de8f85753ad1d6dde66adb6bb4cb09e9528c7cd6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Layer section review comments from Paul Eggleton added.
(From yocto-docs rev: a536fe1635dbe9157e86995e7a78568e41a75957)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implemented Paul Eggleton's review comments for the "Understanding
and Using Layers" section.
(From yocto-docs rev: ec376754f63122a1bd31d47e153ee3e872aac0b5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I converted the hard links to use the variables as established
in the file poky.ent.
Also, Cleaned up some bad text in the term "Yocto Project Files."
Looks like a cut-and-paste problem.
(From yocto-docs rev: e2e20bf4895d80dae73595e93132f37fb31121d1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section describing how to set up meta-intel has been re-written
to provide more information about this Git repository and why
it is important. Also, added information explaining why user
should use the same set up method (tarball or Git repo) as used
to set up the YP files tree.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 53fbfc59f0183a6b8474ed643302faffef79356b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied the review comments from Paul Eggleton for the new section
on "Understanding and Using Layers."
(From yocto-docs rev: 6bf5854dd355afdbc01c4c4fb94a4062bd9eae20)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a bit more information to the wording where it talks about
creating a Git Repository if you are going to contribute back
into YP. This change was suggested by Robert P. J. Day and
was submitted to me in the form of a patch. For reasons unknown
to me the patch Hunk failed even though I believe I had things
saved and applied correctly. I had to resort to applying it by
hand. I ended up doing a bit of re-writing on the suggested
change to clean it up.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 94f90c91e6b1d13bebc7a434210452f222ef0317)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several topics in the "Common Tasks" chapter really fit better in
the "Newbie" chapter. I moved these sections out. I also combined
information from the section on submitting changes from the
"Common Tasks" and the "Newbie" chapter to live in the "Newbie"
chapter only.
(From yocto-docs rev: 90fa8c125e545c57a5a994dd59715b73c5c4882f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed redundant link to manual.
(From yocto-docs rev: 7e7bc327237cae2be3c67e5b711548a16c4d8648)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new section on managing layers. This is a sub-section that
completes the new layers section.
(From yocto-docs rev: 551f36a75485d0b3ecbd69d94fc359cfa42c875d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The change to the dev-manual-newbie.xml file was minor. I added
a link anchor for the term "metadata."
The change to the dev-manual-common-tasks.xml was extensive. I have
added an entirely new section on layers called "Understanding and
Using Layers." The new material has several sub-sections.
Information was based on emails from Paul Eggleton.
(From yocto-docs rev: 4fb34abd60180fc2482ddb9f62e476763cee7679)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I renamed the "BitBake Layers" section in the YP Development
Manual to "Understanding and Creating Layers." Renaming the
section broke three cross-references in the YP documentation
manual set. I applied fixes to the references.
(From yocto-docs rev: 93f4f5dfb61ed48047a40f5bbbc3f5e844c7c2f4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "BitBake Layers" section was grossly mis-positioned. It appeared
in the "Making and Maintaining Changes" section. I have moved the
layer section to the very front of this chapter. It is fundamental
to know about layers and how to create your own custom layers.
(From yocto-docs rev: 410154f6e0a1e1f3ebc05d3f45ed2ce6f71cc618)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new section on building from an external source tree.
This addition was driven by a need through two community members
whose feedback was picked up by Darren.
Reported-by: Inaky Perez-Gonzales <inaky.perez-gonzales@intel.com>
Reported-by: Mohamed Abbas <mohamed.abbas@intel.com>
(From yocto-docs rev: c9548803f58e5055d6686dbc16c94308296ccf2a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a reference anchor to the spot in the dev-manual for the
"Yocto Project Source Repositories".
Other changes were to the bsp guide and were general edits to the
"Linux Kernel Configuration" section.
(From yocto-docs rev: def35923199d48c879ff06a68f81b5cd28d55185)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated all the CSS style sheets so that the Note, Warning, Tips,
Caution, etc. boxes are not so prominant.
(From yocto-docs rev: 451568553e9620c1e247c2f67b0665b184c3300b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Throughout the manual there is a specific term to refer to the
YP build directory: "Yocto Project Build Directory." This term
was being loosely referred to and was not consisten in linking to
the actual term definition in the Terms chapter. All this is
fixed.
(From yocto-docs rev: 9229a512a62780a0e52089cc865d0903cbe7c92e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
changed bblayer.conf to conf/bblayer.conf and also correctly referred
to the Yocto Project Build Directory.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: 64dffc2a4e587f198d44b0ed0cea269bfa16d3be)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to back off a bit on the use of the term "working directory".
Paul clarified that it was okay to use the term "temporary source code
location" when talking about where the source code for a package was
located.
(From yocto-docs rev: 8d3f7613f32f1ce91c9d53e2db3c36448abb5a82)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implemented Paul Eggleton's latest set of review comments to the
"Modifying Temporary Source Code" section.
(From yocto-docs rev: cd43c642308ba7c049e6ba79befa471673c078e7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
More edits to the "Finding the Temporary Source Code" section as
pointed out by Paul Eggleton.
(From yocto-docs rev: 2987abe413687e216c4fe38d1db855409a595dab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied Paul Eggleton's review comments. Basically trying to clarify
what is the S variable and what is the WORKDIR variable when
determining where unpacked source files are.
(From yocto-docs rev: e139e441653fa00309de204b7ad9f5a7ad7bdcb8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Put in the real link to the YP Source repositories instead of a
click "here" thing. Put in a reference to the BSP Layer section
from the term layer. Fixed a grammar type.
(From yocto-docs rev: 6b3b63480f948dad2c5101deedb8deafad291728)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added some text to explain where the meta-intel repo can be
found within the YP source repositories. Also provided a link
back to the start of the BSP Guide.
(From yocto-docs rev: 79d513d010637e4a684da64b363ed8d957f06640)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added text so the user could locate the poky-extras Git Repository
within the YP Source Repositories.
(From yocto-docs rev: 3778a768ae30e323be0e84b55778040ebe89a3ad)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a reference into the YP Source Repositories so the user knows
where our supported Linux Yocto Kernels are. Also, corrected a
mistake in the working about copying the bare clone.
(From yocto-docs rev: 76f3d59dd9e0b30644415f33158d71ec6932fb4f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added some clarity on where the poky Git repository comes from
with regard to the YP source repositories.
(From yocto-docs rev: 29c0b095daa39256b69cd35f744136d97a239cc3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton's review comments on the "Modifying Temporary Source
Code" section have been applied.
(From yocto-docs rev: 8f17f9e556e7027d8aba1fe69d614d17cdbcc054)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Complete re-write to the "Modifying Temporary Source Code" section,
Section 4.4. This strategy now comprises telling the user where
this temporary source code is, how to change it within a Quilt
workflow, and how to change it within a Git workflow.
I consulted with Paul Eggleton quite a bit to come to this conclusion
that the section needed more attention.
(From yocto-docs rev: 8c6c80121c1eeb1ec6f79e1efb6aa27aa9fd111f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some edits of Paul Eggleton's.
(From yocto-docs rev: ef5a82d429480c3820db93f0b7207d7e470454af)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I combined the section on changing package source code and
the section on changing package source code with quilt into one
over-arching section named "Modifying Package Source Code."
The section on Quilt was sort of a stand-alone section but Paul
Eggleton suggested that it is a natural follow-on. So I put the
two sections in as sub-sections.
(From yocto-docs rev: ae4d3cf99e27f74b151939d2f5a2b440b91ac6d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied the review comments from both Paul Eggleton and Joshua
Lock for the "Modifying Package Source Code" section.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
Reported-by: Joshua Lock <joshual.lock@intel.com>
(From yocto-docs rev: 276c13517c7edda8407fdf82c36d14029c5fcee4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created a new section called "Configuring the Kernel." This is the
how-to counterpart for the concepts part created in the kernel
manual. The section consists of three sub-sections:
"Using menuconfig", "Creating Config Fragments", and
"Fine-tuning the Kernel Configuration File." Primary source for
information on this section was Bruce Ashfield. He has this section
for review.
(From yocto-docs rev: 3ac718bc69b4914c41a0bb94134c085964ee71a7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I beefed up the definition for the term "Yocto Project Build
Directory." I included the TOPDIR role and also expanded the
discussion on how it is created and the control the user has
over it.
(From yocto-docs rev: d00f30708ccd5fb9e1fc3c8e5240e0ab7a892fe0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-write of the section describing how to update package source
code. I added some rationale to the process and provided more
detail regarding where to find the source files and the naming
scheme behind it. The new section is on review so changes could
occur.
(From yocto-docs rev: 2a1d37a87abb82c66a0ad3fc39d5da9f2f5b1b7e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Last edits to the "Git" section and the bulleted item that defines
the term "Yocto Project Files." These edits were from a review of
Joshua Lock.
Reported-by: Joshua Lock <joshua.lock@intel.com>
(From yocto-docs rev: 57cbb06aac566e02bb2e2a1ad05c3ff6dbb0359c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added "tasks" to the bullet item that says the manual describes
common development models. Now with the "Common Tasks" chapter
in here the intro needed tweaked.
(From yocto-docs rev: 8faa6308dbee2138f404d18c6d384b9af7bad5cb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Broken link fixed.
(From yocto-docs rev: 6c9102ed8651ab93de46781dede05b2312d102d7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made another pass through the document and cleaned up some
mistakes and also removed redundant links to manuals where I had
already provided a link to the specific section.
(From yocto-docs rev: 5da8ffe100127f5fe4bfd2b478f177d6bef3a968)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moving the "Common Tasks" section from the YP Reference Manual into
the YP Development Manual upset a bunch of links. I have corrected
these links.
(From yocto-docs rev: 69ee73c59958aaab6f6370231c65300d1d8c92f8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated dev-manual.xml to include the new common tasks file
'dev-manual-common-tasks.xml' and updated poky-ref-manual.xml
to not have the file 'extended.xml'. This reflects the new
chapter swap between the YP reference manual and the YP
development manual.
(From yocto-docs rev: 978e3be4f20b0a95cf124ce1a9136016a3e71da1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I am moving the "extended.xml" file from the YP Reference Manual
to the YP Development Manual. This will be the basis for a common
tasks chapter that talks about common things developers do.
(From yocto-docs rev: 874b3a399c69e5eabf5001a5df5a3064a6d1f0ec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
