Two patches that were being applied in 4.6.x are now applied for 4.7.3.
The functions of these two patches are:
* Add support for 2bpp (only affects qt4-embedded)
* Use correct infix on QtUiTools library (only affects qt4-embedded as
qt4-x11-free does not define an infix)
(From OE-Core rev: 1eb0207a7ae8cbc31ecde313a020ed4f12f70dd8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should only have one version of Qt4 supported in oe-core.
(From OE-Core rev: 95f348d81353ea105493d0cc360d63b6b7264ce5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
add DEFAULT_PREFERENCE = "-1" to disable git recipe
Added libx11 for GL support to DEPENDS
Use BROKEN to disable qemuarm and qemumips world build of qemu target
(From OE-Core rev: 1bedd7f3d73c2f9f179f4de4bfaea944a18e49b5)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add Upstream-Status tag to patches for the following recipes:
apmd
insserv
linuxdoc-tools
openjade
sgmlspl
at
sudo
(From OE-Core rev: 89ff546de3ce6b1c441f04d7a153c4f8d514a749)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a skeleton for init scripts, the original structure is from
/etc/init.d/skeleton of Ubuntu 10.10, it is in sysvinit_2.87dsf, so add
the COPYRIGHT(GPLv2) of sysvinit_2.87dsf. Modified the original skeleton
a lot to make it as easy as possible, just use posix shell command, and
have tested it with core-image-minimal.
* The skeleton implements the following actions:
- start, stop, restart, status, try-restart and force-reload.
# force-reload is a alias of try-restart.
- not implements reload, since only a few programs have it, just leave
it as placeholder.
* Add /usr/sbin/skeleton-test to test /etc/init.d/skeleton
* The /etc/init.d/skeleton can be run and output the example messages:
1) #./skeleton start (test start)
Starting skeleton ...
2) #./skeleton start (test start again when running)
skeleton already running (1078).
3) #./skeleton status (test status when running)
skeleton is running (1078).
4) #./skeleton stop (test stop)
Stopped skeleton (1078).
5) #./skeleton stop (test stop again)
skeleton is not running; none killed.
6) #./skeleton status (test status when stopped)
skeleton is not running.
7) #./skeleton restart (test restart when running)
Stopped skeleton (1128).
Starting skeleton ...
8) #./skeleton restart (test restart when stopped)
skeleton is not running; none killed.
Starting skeleton ...
9) try-restart (or force-reload) means restart the service if the
service is already running
#./skeleton try-restart (test try-restart when stopped)
skeleton is not running; none killed.
#./skeleton try-restart (test try-restart when running)
Stopped skeleton (1181).
Starting skeleton ...
* Have used syslogd to test it in a real world(with both
core-image-minimal and core-image-sato)
(From OE-Core rev: c1b6f840ad7c483e905f9a19eb2b5a8eac0b9973)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add pidofproc to ${sysconfdir}/init.d/functions, this is used for
getting the pid of the process. It uses pidof to implement currently, it
may also use the pidfile or ps to implement in the future.
(From OE-Core rev: 114a11628fb04c30cc96c9fd23db7a7fbc4fd02e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cleanup the whitespace in functions, replace the 4 whitespaces
indent with tab.
(From OE-Core rev: 60df57a54ebfe8fa1c1574bcd7900c58810aa2d2)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the layer meta-skeleton, it will be used to place the various
canonical examples.
(From OE-Core rev: 3ccbfdecd0cd6c6d1476600b868647a9af46742e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
clutter-1.4 is moved to meta-extras
clutter-box2d is migrated to latest 1.6 version
(From OE-Core rev: 5b9786fe10a630bfbb344a6a644171fd4457b657)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move to meta-extras
Also remove yaffs2 from image_types.bbclass
(From OE-Core rev: 6a97657ae834945ae26e5933d29bd94d0f7fea67)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also use the glibc override instead of target overrides and remove
distro overrides creating variables that can be overridden instead.
(From OE-Core rev: ab046b02adc523735ffd61b530130a8c967f9569)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The git repo layout is different from the cvs repo layout
(From OE-Core rev: b45d167562ca3dad9f1079a863789d3e294c2d03)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added more explanation about the base directory (meta-<bsp_name>) to the
Example Filesystem Layout section. These changes were suggested by
Tom Zanussi to help users understand better how to add BSP layers
to the build system.
(From yocto-docs rev: ced445910363b2f10b5b5ca72236f54ae4b7e050)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new entry for we do not support spaces in filenames.
This entry was suggested by Richard.
(From yocto-docs rev: 27d7f951056fb55bddcd7a71374359583c635073)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the 'BSP Click-Through Licensing Procedure' section there was an
old link to the BSP download page on the Yocto Project website. The
link was non-functional. I fixed the link so that it points to the
Yocto Project BSP Download page. I also re-wrote the paragraph to
read better.
(From yocto-docs rev: b87714fa54f71aa061126b7f29d80723a90818e8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the '1.1.3 Pre-built User Binaries' section it said that the
ADT and minimal images were kept in the optional
meta-<bsp_name>/binary directory. Jianjun Xu pointed out that
in fact it is just the minimal and sato images here. I also
confirmed with Tom as well. I re-wrote this sentence to be
clearer and more accurate.
(From yocto-docs rev: 6757abff52841b5d1e1991ab22314fa7a243a87d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the '1.1.4 Layer Configuration File' section there was a BBFILES
statment that used the '\' character to indicate a continuation of the
command on the following line. However, the example did not use
a new line. I added the hard-return to correct that in the example.
(From yocto-docs rev: 185352ae2f5879a8418715053f3791b167bd6d7e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the example BSP name 'meta-intel_n450' to 'meta-n450' in
the section 'Example Filesystem Layout.' Error found by Jiajun Xu.
(From yocto-docs rev: 0dd6f97dcc51cec4bae96ca0430af9300619749f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a newer version of the yocto-environment.png file that has
OE-branding. This is the figure used now.
(From yocto-docs rev: 094c0c9661ec1c00da2a1fd0ab4818c0075a8b52)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the hello_2.2.bb example to hello_2.3.bb
(From yocto-docs rev: b1d07533b82a37aa5e52ebdbb3e9629e2b8ba549)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The command used in the example to build an image was using
'bitbake core-image-sato', which is only available in master and
not Bernard. So, I changed the command to be 'bitbake poky-image-sato'
at Dave Stewart's request. He located and pointed out the error.
(From yocto-docs rev: 3fa83550aaec5a3549825814a77fa7a823a2daea)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gypsy: Add upstream status information for gypsy's patch
alsa-utils: fix upstream status typo
pulseaudio: add upstream status for pulseaudio-0.9.15's patches
hostap: add upstream status for hostap's patch
glibc: add upstream status for glibc's patch
glib-2.0: add upstream status for glib-2.0's patch
mtd-utils: add upstream status for mtd-utils patches
add upstream status for opkg's patches
mark add_vercmp.patch as inappropriate since the added function is not
used.
(From OE-Core rev: b0052e9467608cdc2e3b85f5b718e6b9c03d44ca)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Pass -N option to prelink so that no cache file is generated (obviates need for deleting it afterwards).
Use symbolic names, ${sysconfdir} et al., rather than hardcoded paths.
Pass explicit -c option to prelink in case ${sysconfdir} and ${sysconfdir_native} are different.
(From OE-Core rev: 78a3cc9e8588e37badcd2ea02d2cf3b5a25ee5b8)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The library libQtOpenGL.so* is needed by LSB Test Suite.
So I add them to lsb-image for platform emenlow and mpc8315e.
(From OE-Core rev: a43f1278dc0561b70041a956ff65d89110cece03)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Link /usr/lib/sendmail to /usr/sbin/sendmail
(From OE-Core rev: efd143684b31e8079bec6ac9cf02b14e0f76d56c)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The script init-functions can't be built into rpm package of lsb.
I modify lsb_1.4.bb to add this script to rpm package of lsb.
(From OE-Core rev: 8181b1b8923ffa5ddc993a08ed8b870c8328d473)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some upstream git repo may rebase in the future, which means current
revision may disappear from the upstream repo after the rebase.
current git fetcher can not handle this case, because the git mirror
tar ball is per repo, and may also change in the rebase and lost the
current revision info.
To fix this issue, this patch
- add rebaseable tag in the SRC_URI
- for rebaseable repo, make git mirror tar ball per revision, in this
case, even upstream rebase, the git mirror still has the current
revision info.
- for rebaseable repo, generate mirror tar ball by default, since the
repo may change in the future.
(Bitbake rev: 92701d4c5372db48847c70da4ebd0736d79fd54b)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* -oecore was changed to -oe to be more consistent with SDK_VENDOR as we had -oesdk as SDK_VENDOR and not -oecoresdk
(From OE-Core rev: 7b3e1e0f8e31a1a20ba600bdc66fe4455e98c8f6)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a backport of the corresponding package.bbclass functionality
(which is needed by micro) from the openembedded tree.
(From OE-Core rev: 600dbb7cb384c2290af38b993a9bea3a4dfc4494)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
for the following recipes:
pcmciautils openssl udev apt gdm
(From OE-Core rev: 552c9fa44c2a2bb94bcf83bff802773265a35a27)
Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For some reason guilt-native seems to have gone out of its way to refer explicitly to /usr, which breaks on micro.
Let's use ${prefix} instead.
(From OE-Core rev: e3ada06e13820539425a4780cd749bf974b96b6f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows distros that don't want ldconfig to turn it off.
(From OE-Core rev: cd9662ff326de05332afabea3ec35bbbd861687c)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes a build failure when ${prefix}="".
(From OE-Core rev: d82ed45d390f48b950cc490a055daa746f4a716a)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
handhelds.org cvs is down and doesn't seem to be coming back.
update-rc.d now has a new upstream home, point SRC_URI to that.
(From OE-Core rev: 1510fb829eff897efb888ae853d2ede90351c9a1)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
perl${PV} becomes hostperl when building for the target so we need a wrapper
on that too.
This is 1e255fbd296e95ff178d66c4a1fe4875a988d7e1 in OE.
(From OE-Core rev: 8e601cfb307bc9064a2478a87ad3097e21871ff7)
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie
Paul Eggleton
Saul Wold
Nitin A Kamble
Jessica Zhang
Scott Garman
Robert Yang
Koen Kooi
Scott Rifenbark
Dongxiao Xu
Phil Blundell
Xiaofeng Yan
Yu Ke
Martin Jansa
Qing He
Zhai Edwin
Bruce Ashfield
Tom Rini