With introduction of the 3.2 kernel repository, we can make the qemu
targets prefer this variant. Built and boot testing has been completed
on sato/minimal targets for all emulated targets.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Now that the 3.2 kernel has been introduced, we need a 3.2 bbappend for
the yocto hardware reference boards.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Updateing the meta-yocto SRCREVs to the new 3.0.18 kernel.
The -stable team released v3.0.18, so it becomes the new base for the
linux-yocto_3.0 recipe.
Along with the 3.0.18 update this kernel refresh brings in the following
changes:
59314a3 meta/beagleboard: Using CONFIG_PANEL_GENERIC_DPI=y
b168325 crownbay: use emgd-1.10
281b80f kver: bumping to v3.0.18
0d5d0dd common-pc*: add SMP and virtio
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Since the target doesn't have the related requirement
to use USB slave hardware supporting usb gadget, so
remove it from MACHINE_FEATURES.
Signed-off-by: Zumeng.chen@windriver.com>
Acked-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the config sample for incremental image generation to
meta-yocto/conf/local.conf.sample.extended
[YOCTO #1651]
(From OE-Core rev: 0df0399677a6677fc810e32e9275ee9e79021e9a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hob may dynamically sets BBLAYERS to bitbake server, thus we need a
flexible way to load BBLAYERS value.
(From OE-Core rev: 458d0f8b39e7d9dce544f53c65e2a6ffae21ad24)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than conditionally drop eglibc-utils based on wchar support, set
USE_NLS="no" in the distro config to avoid pulling in gettext.
Also addresses some confusion over the "All rights reserved." statement by
explicitly referencing the MIT license.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Poky-tiny is intended for building very small OS images. The distro
definition sets the providers for the kernel and the runtime services.
It also reduces the eglibc component list and other DISTRO_FEATURE
elements.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Poky-tiny is intended for building very small OS images. The distro
definition sets the providers for the kernel and the runtime services.
It also reduces the eglibc component list and other DISTRO_FEATURE
elements.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow the reuse of poky.conf by distro definitions wanting to remove
content by introducting POKY_DEFAULT_EXTRA_R*. These are appended
to the corresponding DISTRO_EXTRA_R* variables and can be overriden
by distro configs that "require poky.conf".
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1390]
Updated the meta-yocto support for the routerstationpro on the
preempt-rt kernel support.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the routerstationpro and beagleboard compatibility and SRCREV
to pickup v3.0.12 support.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Buildstats should be allowed to be optionally enabled. It's
recommended that it be enabled via the USER_CLASSES setting.
Alternatively it could be enabled via the INHERIT_DISTRO or
similar mechanism.
(From OE-Core rev: 09b1dc8bd886c8cd2a5d4085d8bb4b73ece1f5b0)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Machines shouldn't be poking around PREFERRED_PROVIDERS which aren't
machine specific or at least machine safe. Kernels are machine specific
and the xserver is selectable. libx11 and mesa are now really a distro choice
and machine configurations shouldn't be poking around them as it just leads
to corruption, conflicts and confusion.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1674]
local.conf.sample.extended: An image based on gtk+-directfb don't need x11 for DEFAULT_FEATURES
Remove "x11" from DEFAULT_FEATURES and add "directfb" to it because someone could don't need x11 in their project, perhaps
gtk over directfb will meet his reqirement.
(From OE-Core rev: 5def790bdecd2726692b40a57bc12c8bdfea9179)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allows us to import classes only for images and not to the global
namespace
(From OE-Core rev: 49dcb301ab39327554d86d23cf6f8d435d7a7351)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've a new Clutter version in meta so need to add our
atom-pc bbappend modifications.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: ddb825c87dd3e59d50841a993080a00d1459b1e7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Yes, this one is against meta-yocto, I'll fix it to apply the same
change to OE-Core's local.conf.sample in the final version]
Add alsa to the MACHINE_FEATURES - looks like this was an oversight.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With 1.1 release coming, it's time to increment the DISTRO_VERSION
and poky version.
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use RDEPENDS_${PN} instead of RDEPENDS.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Closes [YOCTO #1203]
Using the hard floating point abi is incompatible with some binary libaries and
3D support for the Beagleboard. While we do not provide these in poky and
meta-yocto, softfp should remain the default for compatibility reasons.
Provide documentation and a commented assignment to DEFAULT_TUNE instructing
how to enable hardfp, but leave it disabled by default.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Jason Kridner <jkridner@beagleboard.org>
CC: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The emenlow BSP is now contained in the meta-intel layer.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the kernel SRCREVs to pickup the latest meta and BSP
changes.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add CONNECTIVITY_CHECK_URIS to run the network connectivity sanity test for
http, https and git sources.
The variable is soft-assigned so that it's easily overrideable.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since there aren't individual qemu*.conf files in meta-yocto the
qemu machines follow the default preference in poky.conf, which is
the 2.6.37 kernel. Rather than introducing new .conf files just for
this adding machine specific overrides is lower footprint.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Updating the SRCREVs to pickup the kernel.org -stable update for
3.0.3 and to pickup fixes done in standard for oe-core supported
machines.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Provide the necessary info in the linux-yocto-rt_3.0.bbappend to
support building the RT kernel for each of the meta-yocto example
BSPs.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Conditionally assign the PREFERRED_PROVIDER_virtual/kernel in the meta-yocto
machine configs to allow the user or other layers to override it. This is
required to use the linux-yocto-rt kernel, for example.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
libsdl will check if opengl is set in DISTRO_FEATURES, then enable
openGL option during do_configure. It is required for 3D game testing.
Fix [YOCTO #883]
Signed-off-by: Jiajun Xu <jiajun.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
local.conf is the first thing anyone new to the project sees. Over time it
has built up a ton cruft and isn't even accurate in places.
This patch:
* Moves things to local.conf.sample.extended if a new user is unlikely
to need to immediately care about the options
* Reorders the file to be more intuitive to a new user
* Moves certain default values to default-distrovars.inc in cases where
most users wouldn't want to change the value
* Adds large blocks of text to explain what an option does. There have
been too many cases of a user not realising what some of these
settings do and how they can use them to their advantage (like DL_DIR
for example).
(From OE-Core rev: a0ccb33ac5a2231c979c3369159f763dff1e0a2e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This means we can set defaults in layers or other configurations without
the default user config masking it out.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change will cause the live image to be built by default
No longer is it necessary to build a -live image type.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As the staging of linux-yocto-3.0 showed, we should explicitly
state our preferred version of linux-yocto. This prevents unvalidated
changes from being forced into machines. Layers and machines are free
to override this as they are updated.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
A previous patch changed the default TERM to use xterm. This updates
local.conf.sample to match the change
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds the core multilib class which can be used along with a
parameter specifying the mutlilib to use in BBCLASSEXTEND.
The MLPREFIX variable is added and can be used in cases where its too
difficult to dynmaically work out where a mutltilib prefix is needed
to be added to a variable.
This includes:
* SHLIBSDIR and PACKAGE_ARCH fixes from Lianhao Lu.
* PACKAGE_DYNAMIC mapping from Yu Ke
* PACKAGE_INSTALL mapping from Yu Ke
* RPROVIDES mapping from Yu Ke
* TARGET_VENDOR fix from Mark Hatle
* Ignorning *-native-runtime dependnecies as well as *-native from Yu Ke
* Map PKG and ALLOW_EMPTY from Dongxiao Xu
* Ensure RCONFLICTS and PKG field dependencies are remapped (from Dongxiao Xu)
* Ensure PN and MLPREFIX are set at the same time to ensure consistent BPN values (Yu Ke)
(From OE-Core rev: 5d9453049915db48ec4b5972e12287417ebb61a2)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Xu Dongxiao <dongxiao.xu@intel.com>
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Creating a 3.0 bbappend to enable work on the hardware yocto targets.
The SRCREV updates in this file are accurate, but compatibility
has been commented out until support can be verified.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Default to XTERM_TERM* instead of KONSOLE_TERM* since Konsole support
only works for KDE 3.x, and note this in the comments (see Yocto bug 1294
for further details.) Also add a comment about PATCHRESOLVE = "noop".
(From OE-Core rev: 4c88733f8bace5bb6503ebfe5238e96fe424e6d0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some additions and grammar fixes to the comments, as well as moving
the locale options to the same place.
(From OE-Core rev: f3cd4845d27fb5cecd173cb60c947bb36888d2e5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oprofileui-nativesdk would be a better way to handle these kinds of
requirements with the modern system, and it is not something that most
users will need to configure anyway (nor was it supported.)
(From OE-Core rev: 87443c874f03b2220290f13908da58a414d3a3a9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that we have a pristine copy of the variables available at launch time
we can use them when looking to inherit the OS's environment.
(Bitbake rev: 21c21fcc5871e81d8d497b6baed605cdd74c4571)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The MPC8315E has a e300c3 core in it with 'classic' or normal PPC
floating point.
'SPE' floating point is what exists on the e500v2 core.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Fixes [YOCTO #1227]
Updating the fsl-mpc8315erdb SRCREV to include the following commit:
[
mpc8315erdb: fix ethernet at boot time
Set the default MAC addresses for the two ethernet ports on the
MPC8315E-RDB to the factory default values, allowing ethernet to come up
correctly during boot without upgrading U-Boot.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Fixes bug [YOCTO #1161]
Fixes bug [YOCTO #773]
This streamlines the routerstation pro configuration to remove options
that are either unecessary or that are causing bugs.
Also added to all branches is:
commit ffd73d6b2a9bfa0de5710b90a2237f4be66ae9a7
Author: Yinghai Lu <yinghai@kernel.org>
Date: Thu Jul 14 15:27:44 2011 -0700
mm: use alloc_bootmem_node_nopanic() on really needed path
commit 8f389a99b652aab5b42297280bd94d95933ad12f upstream.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Library "libQtOpenGL" is needed by an lsb image. So I add it to task-core-lsb.bb
Fix Bug [YOCTO #1020]
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
[YOCTO #1205 ]
The commit ab1171b(busybox: backport distro-features handling from oe
master) actully makes busybox's largefile support disabled. So busybox's
mkswap complains "lseek: Value too large for defined data type" when we
install BSP image into the target device.
So we have to enable largefile support, and bump PR of busybox(in a later
commit).
Note: poky-lsb.conf enables "largefile" and includes poky.conf, so we can
move "largefile" from poky-lsb.conf into poky.conf.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
The default variable DISTRO_FEATHURE was set in poky.conf before \
moving to defaultsetup.conf. Defaultsetup.conf is included after poky-lsb.conf \
So poky-lsb.conf sets the variable using += but since its empty, \
it might as well be an = and then the later ?= doesn't do anything since the \
variable is already set.
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
As part of sync'ing the in-tree beagleboard support, the
following commit has been pushed to all branches, and hence
the SRCREV update:
bb8e31f USB: ehci: remove structure packing from ehci_def
The beagleboard SRCREV update captures the 69 new patches
merged from meta-ti and other upstream sources.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Try to get closer to the meta-texasinstruments layer which uses
xserver-xorg. Provide a default xorg.conf that matches the one
from meta-texasinstruments.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
We need a generic alsa based mechanism that we can use a bbappend to save
default mixer controls per bsp. Until that is ready, this ensures the Audio Out
on the Beagleboard is enabled out of the box.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Using FILESEXTRAPATHS is cleaner than the old FILESPATH-based method, and
as meta-intel layers are using FILESEXTRAPATHS their formfactor bbappends
will now work. In addition I have used FILESEXTRAPATHS_prepend which is
not absolutely necessary, but provides a good working example in case it
is copied by other layers that are intended to be used on top of it.
Fixes [YOCTO #1156]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The linux-yocto recipes have been renamed to include explicit
version numbers. The meta-yocto bbappends must be updated to
follow the new naming convention.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Add a new configuration file local.conf.sample.extended, and more advanced
settings what user can configure could put in this file.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
The default list of EXTRA_IMAGE_FEATURES adds alot to the generic non-dev and non-sdk image
so ensure that the sato-sdk and lsb-sdk includes this list by default.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
During work on 1.1 BSPs, some driver options changed. The
result was that the upstream fix b1d670f10e8078485884f0cf7e384d890909aeaa
needs to be available for all BSPs.
These SRCREV updates are the result of making that commit common.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Fixes bug [YOCTO #802]
This SRCREV update picks up the following changes from the
2.6.37 kernel tree:
- fishriver: creates and uses a dedicated BSP branch
- fishriver: usbnet fixes
- linux-omap: merge to match the 2.6.34 upstream merge content
- beagleboard: adds VFAT config
- fsl-mpc8315rdb: enables the eprom
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Setting PRSERV_HOST and PRSERV_PORT would trigger the poky to use remote
PR network service. Leaving them unset allow the user to build image
without the PR network service
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes gcc 4.6.0 compliation issues by importing the upstream change:
Author: Michal Marek <mmarek@suse.cz>
Date: Mon May 2 12:13:01 2011 +0000
kbuild: Fix passing -Wno-* options to gcc 4.4+
Starting with 4.4, gcc will happily accept -Wno-<anything> in the
cc-option test and complain later when compiling a file that has some
other warning. This rather unexpected behavior is intentional as per
http://gcc.gnu.org/PR28322, so work around it by testing for support of
the opposite option (without the no-). Introduce a new Makefile function
cc-disable-warning that does this and update two uses of cc-option in
the toplevel Makefile.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Integrated-by: Bruce Ashfield <bruce.ashfield@windriver.com>
:100644 100644 0ef00bd... 1d8e7e9... M Documentation/kbuild/makefiles.txt
:100644 100644 7bd863e0.. 74bac80... M Makefile
:100644 100644 ed2773e... ba25c44... M scripts/Kbuild.include
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
LSB Test Suite need library libQtOpenGL.*, so I add them to yocto. It is a part of the solution for bug [YOCTO #1020]
After Intel enable this configuration for x86-64 hardware, [YOCTO #1020] can be closed.
[sgw: updated version based on update from oe-core]
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
The intent is to allow distros to share common core config but still allow
customisations. The core should work with no distro set but users
can still customise in any ways needed.
(From OE-Core rev: c0a148077ae27a1ef57c55ac22953c68d001af57)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are the minimal defaults to allow OE-Core to function standalone with
no distro set and are constucted such that the distro can either override values,
or totally replace the include file entirely as needed.
(From OE-Core rev: b34d5e93fab4274e1a56f446e2ba4756d614cc47)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tested boot, network, sato desktop, amixer, and audio playback on a Toshiba
NB305 netbook.
Depends on "linux-yocto: move non-core machines to meta-yocto" from
Bruce Ashfield to the yocto list:
Message-Id: <a258388e5b8d134009bb37cfc9f6b1c1dd8ba94e.1304707341.git.bruce.ashfield@windriver.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The non-qemu compatibility references have been removed from
the main linux-yocto recipe. This change restores them in the
meta-yocto layer.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Avoids manual configuration of the BeagleBoard xM's ethernet port
(which shows up as usb0).
Fixes [YOCTO #930]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Enable toolchain automation tests in qemuimagetest framework. 3 C/C++ test
projects are added to test toolchain - cvs, iptables and sudoku-savant. User
needs to set TEST_SCEN to "toolchain" in local.conf to enable tests. Test case
will check if toolchain tarball exists under "${DEPLOY_DIR}/sdk". And it will
extract toolchain tarball into /opt. It requires user to chown /opt to non-root
user, who will run qemuimagetest.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The boolean BBDEBUG described in local.conf.sample is no longer
referenced by any other sources. It also conflicts with the OS
environment variable of the same name which maps to the debug
log level also specified by the -D[D[D]] argument.
Remove the boolean BBDEBUG from local.conf.sample.
(From OE-Core rev: 513aa1dc61c26476f10a643f8dafc3d025f408c4)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Chris Larson <clarson@kergoth.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was due to task-poky-extended pulling in qemu-config for
non-GPLv3 poky-image-basic
(From OE-Core rev: 5abe730df009931f5745aadf613d64fe964f94b2)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ligcc and gcc-runtime both are LGPLv2 libraries although they
are part of the large GCC GPLv3 code. There is clearly called out
exceptions for these libraries.
(From OE-Core rev: 63c68ba8a546bd7f05fb048fb2abaa5cfb5eb16c)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>