this init script fails when the default shell is busybox sh. This
is because busybox sh doesn't set the UID. No other init scripts
in oecore feel the need to check the UID so just remove the check.
(From OE-Core master rev: dd6a45536043af34c05a699e468cef4845f7affd)
(From OE-Core rev: 11385321982411d3d1c2aa663b2b2d195c74f353)
Signed-off-by: Jack Mitchell <jmitchell@cbnl.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PPC64 uses long long for u64 in the kernel, but powerpc's asm/types.h
prevents 64-bit userland from seeing this definition, instead defaulting
to u64 == long in userspace.
Perf want LL64, flag __SANE_USERSPACE_TYPES__ to get int-ll64.h.
Fix the below issue:
| tests/attr.c:71:4: error: format '%llu' expects argument of type 'long
long unsigned int', but argument 6 has type '__u64' [-Werror=format=]
| tests/attr.c:80:7: error: format '%llu' expects argument of type 'long
long unsigned int', but argument 4 has type '__u64' [-Werror=format=]
| attr->type, attr->config, fd) < 0) {
| ^
(From OE-Core master rev: e0b56f7ed84da4f71f448548e15d5a75e8eada6e)
(From OE-Core rev: 7d55375ddc1a928e77d5687a8e7b36eecb91c594)
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If bootlogd was configured to write to a log file on the root file system,
the checkroot.sh was not able to change the rootfs to read-only because
bootlogd was started earlier and had a file descriptor open. Lowering
the order of checkroot.sh ensures that the volatile filesystem is set
up before anything writes to it.
(From OE-Core master rev: 13c9bc143f6861517970dafdc7e7a45740d0933d)
(From OE-Core rev: e54864e6db9fddb8ec98e323fe6da88e02ff070a)
Signed-off-by: Jeffrey C Honig <jeffrey.honig@windriver.com>
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In normal use this is pulled in through libpng, but it's exposed in the headers
of cairo-pdf and cairo-ps and a build from sstate can end up without zlib being
present.
(From OE-Core master rev: 8413bf1ce95802bff032b4592ca1aa4728d62cbf)
(From OE-Core rev: 252896140bb107315e58bbd82b9a73528da9b860)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Both nativesdk and multilib use MLPREFIX for their partciular purposes. When
we have both set, cross-canadian can confuse SHLIBSDIR. This forces the
variable to the correct value for cross-canadian, fixing toolchains in
multilib builds.
[YOCTO #5333]
(From OE-Core master rev: 0633b93086a7de7226f4dc6ca403ee116bc58669)
(From OE-Core rev: 003ddbccb260cdbfc6c1ff9e576a0584b0f25378)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are missing brackets in the check meaning MLPREFIX doesn't
get set for nativesdk-qemu-helper when it should be.
(From OE-Core master rev: 5011f4bc8a418d0616d2936b60ecb7ca156632a3)
(From OE-Core rev: 48b4bb2f98a1b7b97688071af4c2d3ee390b6ab3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will allow packages that update kernel modules to run correctly
(From OE-Core master rev: 72c23255cc88b5e2cd6f783231e6f42bf5190df7)
(From OE-Core rev: bce32a41c7e700f49aaa0aacbeb6c83d91a8b255)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
--without-x was removed in 1.32.0, so the correct option is now --without-xft.
Also remove --disable-glibtest, as configure.ac doesn't invoke that test.
(From OE-Core master rev: e806f4ff404515f38318b6fed7d2b614c2138da6)
(From OE-Core rev: 147eac9794bd815f7f10002beacbe47302352ca4)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core master rev: a5afc67cbfc32beb3be10392bf9788cfc3610ab1)
(From OE-Core rev: 18e49ebf8d5cc43eca417cd51cabae175f6b5ea4)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Xorg libraries that use Xmalloc need to know if malloc(0) returns NULL or not,
and as this is a runtime test it can't be checked for. Previously
xorg-lib-common declared that malloc(0) did return NULL, but this isn't true for
eglibc (only uclibc).
Instead, use libc-specific overrides to pass the relevant option.
(ideally the check would use the autoconf cache so this can be stored in the site files)
(From OE-Core master rev: e628c8aba0189de30de2833882b9999ff3b6547a)
(From OE-Core rev: 93e084ae8bcae8e7bde5a7e52a274a39dc9ba509)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the part after "tty" in the device name go into label along with
everything after that part. For example if SERIAL_CONSOLES="115200;vt100;ttyS0"
than label=S0 but if SERIAL_CONSOLES="115200;ttyS0;vt100" than label=S0;vt100.
If SERIAL_CONSOLES="..;ttyX;..", part after 'X' should also be trimmed.
(From OE-Core master rev: b00b9ae5693e04cacd0843c12a529e7f3dc501ed)
(From OE-Core rev: e807747f28798b080bf13a65293ab04c8d83834c)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can't use htobe* and be*toh functions because they are not
available on older versions of glibc, For example, shipped on Centos 5.5.
Change to directly calling bswap_* as defined in byteswap.h.
(From OE-Core master rev: 63edb6b9a8bdf2f5541edd618f2f598185e37223)
(From OE-Core rev: 2e791639625746037626e348cfac4ad1109bb9ae)
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The group for /dev/hda should be disk instead of root.
The group ID for /dev/hda was 6, but it was modified to be root by
accident in the following commit.
commit c5ef0294a9b8d178896a47c9f5d6e3dd6797e343
device_table-minimal.txt: use user/group names instead of uid/gid
This patch changes it back.
(From OE-Core master rev: 5c5db302400894c2bb1f4052d0f120738589c128)
(From OE-Core rev: aaaba8d087bd4186cd2e309b962d62f240f96b98)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 0bd63125c3.
As discussed on the mailing list, this change changes layer layout
in a stable branch which is unaccetable. The was accidentally
backported and should not have been, this reverts it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When user runs devshell in kernel recipe and compiles kernel,
this will fail by unrecognized option of LD.
----
$ make
...
arm-poky-linux-gnueabi-ld: unrecognized option '-Wl,-O1'
arm-poky-linux-gnueabi-ld: use the --help option for usage information
----
This set to empty LDFLAGS when user runs the devshell, and solve this problem.
(From OE-Core rev: e36ac3ab3a7fe02c7eeb3998ff33c001ab795841)
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When passing the wrong value for UBOOT_CONFIG it ought to raise an
error otherwise it is quite difficult for user to notice it didn't
behave as expected.
Reported-by: Lauren Post <lauren.post@freescale.com>
(From OE-Core rev: 5110dc988e3b8a1ce8b2309e4ddf17abb3f1cb0c)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta branch SRCREV to incorporate the two following
configuration changes:
452f067 lxc: Add lxc kernel config
a249eba x86_32: Enable X86_32 and disable 64BIT explicitly
(From OE-Core rev: 64d4c508652bc5d8a0b4c01f0d0813e58d6b39a6)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta branch SRCREV with the following commit:
[
The oe-core live class now fully support compressed ISO images this is
the corresponding kernel change.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
]
(From OE-Core rev: af2ef5085e92ca6291dabb134a7a3fb194a21d7a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta branch SRCREV with the following commit:
[
meta-haswell-wc: update bsp scc to use linux-yocto-3.8 standard/common-pc-64/base branch
Remove "branch haswell-wc" from haswell-wc-standard.scc
so that "haswell-wc" BSP uses standard/common-pc-64/base branch
on linux-yocto-3.8 repo.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
]
(From OE-Core rev: 978c77cae12f69e05ad97c6edd03d292098fff88)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the overrides are being applied backwards. This means something which is
platform specific is overriding something which is machine specific which
is clearly not intended.
This patch corrects the ordering to match the normal expected behaviour of
OVERRIDES.
Secondly, all overrides are being searched for each path in turn. What should
really happen is that we should look for the highest priority override (e.g. distro
or machine) in each layer, then move on to platform/tune (e.g. armv7a) and
then to arch (e.g. arm). This patch therefore also reverses the for loops
to achieve this behaviour and give the result the user would expect.
(From OE-Core rev: 92cbf7eeea553bfa24c7081473fa8bc4ebc1f552)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having a SRC_URI called ${PN} is asking for trouble. When extending FILESPATH,
alsa-state can be treated as a directory and copied over the contents of ${WORKDIR}
which is invariably not what the user wants.
Avoid this by renaming the SRC_URI to something else and only call
it alsa-state at install time.
(From OE-Core rev: 04c73333e4b539de96f096ca2954b2313175edc4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before checking if the image is a valid value, we need to check if the
list of items is big enough or we will raise an exception.
Reported-by: Lauren Post <lauren.post@freescale.com>
(From OE-Core rev: b833837cac377e7c1c3ff18531b152340b669329)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tar version 1.27 returns:
tar: --same-order option cannot be used with -c
with the commandlines we have been using. We can remove the -s option (which
is --same-order) to remove the error.
(From OE-Core rev: 69c26e795c117aabfaf313abbfd10e70ede633d9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tar version 1.27 returns:
tar: --same-order option cannot be used with -c
with the commandlines we have been using. We can remove the -s option (which
is --same-order) to remove the error.
(From OE-Core rev: 3d5a6d0a480a0fa98260a3b3ffc71b8d9e3e58af)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a fix missing from a previous commit:
http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=20a86e16bc54b74fbdb2a3a407d54210ea262925
since there was another section of toolchain-scripts needing updating.
This patch fixes the missing reference and unbreaks the ADT toolchain.
[YOCTO #5340]
(From OE-Core rev: e1b8b4859f00b40fb941a07a394ed35e06541663)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
when x11 is not defined in DISTRO_FEATURES, there are no x11 headers
so True is not defined leading to :
| ui/sdl.c:62:8: warning: type defaults to 'int' in declaration of 'doing_grabs' [-Wimplicit-int]
| static doing_grabs = True;
| ^
| ui/sdl.c:62:22: error: 'True' undeclared here (not in a function)
| static doing_grabs = True;
| ^
(From OE-Core rev: d3d5ccd3275196fb9e4cb8f49d3c087b97c20ed6)
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it's autodetected and configure doesn't allow to explicitly disable it
(From OE-Core rev: 983446c4f4274b9fd482b2d6b711428f4483c02f)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* dbus-glib was missing in DEPENDS in order to enable dbus backend
but because dbus was in DEPENDS lets enable this PACKAGECONFIG by
default
(From OE-Core rev: c832c457ff40f0f65ab28c17b78b88cb79823db1)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
At the start of install, python swizzles the makefiles around, leading
to chunks of do_compile running again. These race against the install
target, leading to errors if pieces are being recompiled whilst others
are being installed.
For now, workaround this by running the compile target with the new
makefile, then running install ensuring a parallel make race doesn't
happen.
(From OE-Core rev: 72938a8631cfe5be5ac88ad67f2db595e2487e86)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The postinst files were being generated using purely the name of the package,
this unfortunately meant the run order would be based on the name of the
package and not the order in which it was installed on the filesystem.
If package A requires package Z to be fully installed, this causes a problem.
Note:
rpm - as the rpm based install proceeds the order is defined and captured.
so the problem is resolved there.
ipk - this unfortunately does not appear to solve the problem for ipk, as
the status file is not ordered in any appreciable way. This does not
cause any regressions however and sets the stage for a proper fix.
deb - this -may- fix the deb install. Early testing indicates at least some
ordering to the status file. But it's unclear if it completely resolves
the issue.
(From OE-Core rev: b5bafccb89f45d7cdd515b4ba45e0152ca7922de)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #5313]
When performing an attemptonly install, we should skip an errors and
continue to install everything else. However, there is a case where two
packages can conflict, and cause a hard failure.
This workaround, ignores this and allows the image to be constructed.
Note: Some items in the failed transaction may not get installed.
To fix this properly we need to find the issue in smart, and make it ignore
or at least attempt to resolve these kinds of conflicts.
(From OE-Core rev: 4228005689e31ebcafcf0969e80fcc021d1ae063)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In case of QEMU machines, a global public DNS is provisioned,
as the network is not configured via DHCP.
Google's public global DNS server 8.8.8.8 is used.
Partial fix for [YOCTO #4587] (qemu machines case).
(From OE-Core rev: 05ebf5bbacc58315f1b33ffb80148d568f88855d)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When these functions change, the package should rebuild but currently it
does not. We need to add the dependencies manually as the dependency
code can't track dynamically created variables.
(From OE-Core rev: 4003218f774c38bb5de0d95a43153f8b8d7fc4ce)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jack Mitchell
Ting Liu
Jeffrey C Honig
Ross Burton
Saul Wold
Richard Purdie
Jonathan Liu
Muhammad Shakeel
Chen Qi
Nobuhiro Iwamatsu
Martin Jansa
Otavio Salvador
Bruce Ashfield
Peter Kjellerstedt
Eric Bénard
Mark Hatle
Cristian Iorga