This is useful as it avoids pulling python into a build just to build
chkconfig. The python recipe uses the libnewt installed in the sysroot by the
main package, so there's little loss of build time, other than the additional
unpack/patch.
(From OE-Core rev: b255ebbf8283568d732827086bf0bd2b8db1d905)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tracing_enabled should not be used, it is heavy weight and does not
do much in helping lower the overhead. see commmit (Deprecate
tracing_enabled for tracing_on 6752ab4a9c30d5411b2dfdb251a3f1cb18aae48)
in kernel
(From OE-Core rev: ee95048cf0c79dc52857dbc0e5da9363f2ad8b9b)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Even if we define EXTRA_CFLAGS, but it never work, since the source codes
donot refer it, and CFLAGS is given a fixed value.
(From OE-Core rev: 4a7b5963a9d18924ae0564119f4edeefaca6b415)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using CORTEX_ID variable reference in the tuning overrides did not work.
This reverts those changes, and adds a tuning file for the cortex-a5.
Revert "tune-cortexa5.inc: Add tune file for cortex-a5"
Revert "tune-cortexa.inc: create a common include for cortex-a armv7a tuning"
(From OE-Core rev: 74158c2e99c6d8631800ae80025d1cc9f19336d2)
Signed-off-by: Andy Voltz <andy.voltz@timesys.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed for the unittest part of bitbake-selftest can work correctly.
(From OE-Core rev: fe744381e8844ad17dcc6e036650a442dbc9575d)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A non-zero status from the march test for gcc means that the "march" flag
is needed. Correct the logic to return True in this case.
(From OE-Core rev: 217fd857df78c66eae853f935e9cdafcbeb3bc31)
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the same file is installed twice there's a race which can lead to "make
install" failing. Remove the redundant installation of quotaon.service to
eliminate the race.
(From OE-Core rev: c6c5c2285e1b6cb3598ccba08aee3dfd090e7129)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, due to bitbake defaulting to ${B}, it's possible to get ${S}
inadvertantly created before do_unpack, breaking the unpack of git sources,
which expect the destination to not exist.
(From OE-Core rev: 694a15382fe9f3749ffdc0168a6dc2da8a29ae2d)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids unnecessary duplication of setup. The only visible change in
behavior will be the case if siginfo exists and the archive does not, in which
case it'll redownload both, but this doesn't seem unresasonable to me,
particularly since the archive is downloaded first, making this case
particularly unlikely.
(From OE-Core rev: aa4991c307d4bbdd06c3cbf8448240b74c5e01c4)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default FILESPATH isn't really of use, as we don't expect to find sstate
archives buried in layer recipe directories, and the default MIRRORS is
intended for use for fetching SRC_URI, not sstate.
(From OE-Core rev: 46402b2f5b69004751f6663d435bedae0ad9dab1)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without using our python classes and having appropriate dependencies, the
build is nondeterministic, and whether a python-avahi package is produced will
vary depending on the host environment, yet avahi-discover is always produced,
and it depends on python-avahi.
(From OE-Core rev: 4599ef630c13224506671bf84569bfc240cd3032)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we don't have a generic license file for the license in question, we can
warn, but we should still include it in the manifest, otherwise the manifest
doesn't reflect reality. Failing to include a license listed in the recipe in
the manifest can't be allowed.
(From OE-Core rev: e87232828b761d56f1ce6a27e4009d350d68209c)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that liburcu supports mips, this packagegroup can pull in lttng recipes
(lttng-ust, lttng-tools, lttng-modules, babeltrace) on that architecture as it
does for the others.
(From OE-Core rev: c0f435cde195e1d037af32c69aa1732797362cfa)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, if a package QA type from package.bbclass is not listed in
ERROR_QA, it gets shown, regardless of whether it's in WARN_QA. This differs
from the behavior of the rest of the QA handling (which doesn't call
package_qa_handle_error at all if it's in neither _QA variable), and is
nonintuitive. Change this to use bb.note() if it's listed neither in ERROR_QA
nor WARN_QA, so it ends up in the task logs, but doesn't clutter up the user's
output.
(From OE-Core rev: 8f5675e6d3eb8473f367de72d2d3d8a702011a47)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ext2 group includes e2fsprogs, so this is consistent and should be
appropriate, I think.
(From OE-Core rev: 4ec66dc5f38913056942e1288c0b01a00ea0551f)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
--disable-glut and --disable-glw are not recognized since Mesa 8.0.
--disable-glu is not recognized since Mesa 9.0.
(From OE-Core rev: dac1f95e03f897237e6551240c200370d5102807)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patching a generated file is prone to conflicts, and we'll be replacing this
file anyway when configuring, so drop the Makefile.in hunks.
(From OE-Core rev: a3fa323c4d24375be9b783281c3cf31c0707ecb7)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Trying to make a devshell using tmux can fail because "tmux new"
expects a single command, not a series of arguments. It does, however,
split strings in a suitable way. So you can quote the command.
The failure mode is particularly arcane, in that you end up
with a message like:
ERROR: Unable to spawn terminal auto: \
Execution of 'pseudo /bin/bash' failed with exit code 1:
usage: new-session [-d] [-n window-name] [-s session-name] \
[-t target-session] [command]
which is confusing because there's no "new-session" anywhere in
sight (that's actually "tmux new"), and because what failed to execute
wasn't either pseudo or bash.
(From OE-Core rev: f8ed7446755eeb88191e16749350efa1e7e6197c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Build failure was seen on the autobuilder, so add gdk-pixbuf-native to depends list
(From OE-Core rev: 6ea293a8696843779cb23d6176b54efcde0462ec)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
run-postinsts is generic and will handle rpm delayed postinsts just
fine. No need to use another recipe.
(From OE-Core rev: 1195a188f366fbbb04b9379d7ea3c7c02130cc98)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the scriptlet_wrapper is designed to handle only pre/post
install scriptlets. This patch will slightly change the wrapper script
to handle also pre/post remove scriptlets when we want to remove
packages from the final image.
(From OE-Core rev: aea47c77d69407b2e62f151cabba35293d179f0c)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since run-postinsts was made generic, use it for RPM too.
(From OE-Core rev: 1ba44302f522a42535c9ad7d2fcccc06ba4c20b3)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This recipe is used only when the package manager is not deployed on
target and there still are delayed postinstalls that need to be run on
target. At the moment, run-postinsts is targeted to dpkg/opkg. RPM uses another
recipe, called rpm-postinsts which, in turn, is used even when the rpm
package is deployed.
This patch intends to make run-postinsts generic and deprecate
rpm-postinsts. Here's why:
* when opkg/dpkg are not deplyed, the meta-data files are useless.
Hence, the awk script is not needed. The postinstall files are already
saved in /etc/(deb|ipk)-postinsts directory and we can use the same
procedure as in rpm's case;
Also, the recipe is moved out from meta/recipes-devel/dpkg to
meta/recipes-devel/run-postinsts.
(From OE-Core rev: 0222e6740ee4670bbf42d246ab3ecad415ffcdee)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the removal of PM's meta-data was moved in image.bbclass, after
rootfs_*_do_rootfs() runs, there's no need to remove the files in rootfs
postprocess stage. Also, if the meta-data is removed then there's no way
we can save the postinstalls to /etc/(deb|ipk)-postinsts later.
For RPM, it doesn't really matter since the postinstalls are saved to
/etc/rpm-postinsts as soon as the postinstall fails.
[YOCTO #4484]
(From OE-Core rev: aac8a59216819759d6b97bc30a7c717dbee7060a)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch creates a new function, rootfs_remove_unneeded(), that will
be called after rootfs_*_do_rootfs is called and which will handle
delayed postinstalls in a generic fashion, for all backends in the same
way.
(From OE-Core rev: d3d810faf8e93ce2d3faaa70da6deeb25b1cec26)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds the following helper functions:
* delayed_postinsts - outputs the list of delayed postinstalls;
* save_postinsts - this will save the delayed postinstalls for ipk/deb
in /etc/(ipk|deb)_postinsts;
* rootfs_remove_packages - removes packages from an image;
Additionaly, this patch will remove a piece of code in
rootfs_ipk_do_rootfs which will be moved to image.bbclass and used for
all backends;
[YOCTO #4484]
(From OE-Core rev: 928df79cd3964f775c4c6e4283ef84b8882f9328)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
QMAKE_QT_CONFIG is set by the linux-oe-g++ mkspec but it is overwritten
with an empty value read from .qmake.cache. Avoid this by first checking
if the value from .qmake.cache is not empty before assigning it to
QMAKE_QT_CONFIG.
This allows variables from qconfig.pri such as QT_ARCH, QT_CONFIG,
QT_VERSION, etc. to be queried by qmake projects.
(From OE-Core rev: 5330905749828ea8befdee559c180754ac506b75)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qmake2 was being built with paths different to the target Qt.
The incorrect paths can be seen by running qmake2 -query:
QT_INSTALL_DOCS:${STAGING_DIR_NATIVE}/usr/doc
should be /usr/share/doc/qt4
QT_INSTALL_PLUGINS:${STAGING_DIR_NATIVE}/usr/plugins
should be /usr/lib/qt4/plugins
QT_INSTALL_IMPORTS:${STAGING_DIR_NATIVE}/usr/imports
should be /usr/lib/qt4/imports
QT_INSTALL_TRANSLATIONS:${STAGING_DIR_NATIVE}/usr/translations
should be /usr/share/qt4/translations
QT_INSTALL_EXAMPLES:${STAGING_DIR_NATIVE}/usr/examples
should be /usr/bin/qt4/examples
QT_INSTALL_DEMOS:${STAGING_DIR_NATIVE}/usr/demos
should be /usr/bin/qt4/demos
QMAKE_MKSPECS:${STAGING_DIR_NATIVE}/usr/mkspecs
should be /usr/share/qt4/mkspecs
Use the same paths as target Qt for consistency. As the mkspecs are
installed to /usr/share/qt4/mkspecs not /usr/mkspecs, qmake2 was
unable to detect and load the webkit module (it is detected by loading
modules/qt_*.pri inside the mkspecs directory) so webkit was missing
from QT_CONFIG if a qmake project reads the QT_CONFIG variable.
(From OE-Core rev: 37b57b44ff83c718021da4f717fc66a28204c96c)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds support for lconvert and xmlpatterns tools and tweaks the
sed expressions to handle more complex assignments in .pro files like:
LRELEASE = $$targetPath($$[QT_INSTALL_BINS]/lrelease)
(From OE-Core rev: 542fefa61f0ac1dcdacac2630fd44950ac11cdd9)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These will be used by qmake_base.bbclass.
(From OE-Core rev: 405d1325ebbd31676d88a3e157f55d40d04cc3f4)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These tools are needed by some Qt projects (e.g. Qt Creator).
(From OE-Core rev: e2f3232fdc2836685549e59dc5c71363d3bbab5f)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is necessary since libxml2 has python dependency.
This patch will fix this error:
...
/path/to/build/system/4.7.2/ld: cannot find -lpython2.7
...
ERROR: Task 4152 (virtual:nativesdk:meta/recipes-core/libxml/libxml2_2.9.0.bb, do_compile) failed with exit code '1'
(From OE-Core rev: 4f2b3e3831bdc5707eacdab571ab207d8b09953e)
Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Data from SDKs produced from different images or different
meta-toolchain style recipes should go into separate directories,
since SDK_NAME doesn't include anything to differentiate these by
default (only pieces for the distro name and architectures).
Note you should delete or move existing data under the buildhistory/sdk/
directory manually after this change.
Fixes [YOCTO #4622].
(From OE-Core rev: 74658b66530184b0287152397341fbe411e90c71)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
upgrade from 1.8.6p7 -> 1.8.6p8
- removed crypt.patch because it was contained upstream
(From OE-Core rev: 198e0db0e840dd3ac719d0c2ea980e08bf1f3442)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If enable test 'unsafe-references-in-binaries', build libpam will get
following warnings:
WARNING: QA Issue: libpam: /lib/security/pam_cracklib.so, installed in \
the base_prefix, requires a shared library under exec_prefix (/usr): \
libcrack.so.2 => /usr/lib/libcrack.so.2
(From OE-Core rev: 7ffe63c4a4f6b3adfea97eed4c0452c287784663)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Add three ppp configuration files, make "/etc/init.d/ppp start"
be able to work with little change. provider and pap are adopted from
Ubuntu. ppp_on_boot is adopted from http://www.wlug.org.nz.
2. Use build system CFLAGS when compiling
(From OE-Core rev: 6ab8adf980f90040d3a24dd9c0f12dc04d7aadeb)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This test is disabled in oe-core by default, but if we enable it, we'll
get following warnings:
+ WARN_QA = "unsafe-references-in-binaries unsafe-references-in-scripts"
WARNING: QA Issue: chkconfig: /sbin/chkconfig, installed in the \
base_prefix, requires a shared library under exec_prefix (/usr): \
libpopt.so.0 => /usr/lib64/libpopt.so.0
(From OE-Core rev: 18f5e6b80e1465e00242a2513a4bd90e0a2f3ff7)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1, This issue happens to BSP only.
After a BSP board is booted with Yocto linux from USB drive, "cat /proc/mounts" shows:
...
/dev/sda3 /media/sda3 ext3 rw,relatime,errors=continue,user_xattr,acl,barrier=1,data=ordered 0 0
/dev/sda1 /media/sda1 ext3 rw,relatime,errors=continue,barrier=1,data=ordered 0 0
/dev/sda2 /media/sda2 ext3 rw,relatime,errors=continue,user_xattr,acl,barrier=1,data=ordered 0 0
...
but actually the directory /media/sda1 doesn't exist at all, "df" shows:
...
df: /media/sda3: No such file or directory
df: /media/sda1: No such file or directory
df: /media/sda2: No such file or directory
...
2, This is because the mount data comes from proc setup during early boot
before the change root, which then uses a different root filesystem, the
media is not in the new root filesystem.
3, During early boot before switch_root, use `mount --move' to move all
medias to the new root filesystem could also fix this issue.
[YOCTO #2064]
[YOCTO #3705]
(From OE-Core rev: 79bd773cc5e8b8e873cabeb2b9a91f460501dad7)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use new variable GNOMEBN, defaulting to value of BPN, instead of
BPN directly when determining URL for source archive.
(From OE-Core rev: fe297a70c7d6b36a6595534589c71d32209d6a53)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Originally from the https://github.com/dv1/meta-gstreamer1.0 repository,
the patches were copied with only one change:
gstreamer1.0-plugins-package.inc was removed, since gst-plugins-package.inc
is identical except for the LIBV variable.
(From OE-Core rev: e200e61529fa5a78354cde67442e90ace4b3857c)
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We move tar into /bin for target but it can stay in /usr/bin for nativesdk
this will also mean the paths are correct for the buildtools-tarball environment
(From OE-Core rev: b4f208f418d18f2a4e78a56bebacef481061d917)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need unittest so bitbake-selftest can work, tarfile from the compression module
for opkg-utils and json for webkit builds.
(From OE-Core rev: bbcb7329ca4340dbd3d529567dc6b605347e3368)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The do_package_setscene task needs to depend on fakeroot in order to correctly
install its files.
We can whitelist the dependency in the sstate handling code for some
performance improvements since we only need this if we're installing the
package from sstate.
Also use an append operator in base.bbclass for clarity.
(From OE-Core rev: 0810ea2a72bdea67a3d8002c4e12fb20f45cf1d5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Improve the DESCRIPTION for the recipe and add a SUMMMARY.
(From OE-Core rev: ecdccd0c19c1d27aee43a3cca8e4467f270d7f9c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Back in 2010, I added these in commit: http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=36f1ae42fe13dae174b7fb5eb85dc49d7d7b516b
however the package_write tasks sstate only consists of package files and no
fakeroot privileges are needed to write these out, only originally create them.
We can therefore drop these for some small performance gains and a less
convoluted depenency chain.
(From OE-Core rev: 3c760ce4dc15d85be07aafbfea896e7276e0c2c4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The external-python-tarball was intended to provide python for those users who
didn't have python 2.6. It has been unloved for a while so this refreshes
it a bit. Specifically:
* Include git and tar since these can have version issues on some systems
* Rename to buildtools-tarball to better reflect its purpose
* Remove the site-config file from the tarball, its pointless
* Prune down the environment file to just cover PATH and OECORE_NATIVE
(which is needed to correctly install the tarball)
* Add missing grp module (used by do_package) from the unixadmin package
(From OE-Core rev: c8de009e96930709efe8f6aa4e65dd04a48081f2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to be able to generate a standalone tarball containing tar/git so
add nativesdk versions of the appropriate recipes to allow this to be possible.
Tweak the git perl paths to avoid warnings when building the nativesdk version,
ensure the binaries are wrapped correctly and avoid update-alternatives in
nativesdk-tar.
(From OE-Core rev: c91bb8c76e3bd45690e66f3de79cd3adfe45f600)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A clean build found libxi missing this dependency, possible build order
issue.
(From OE-Core rev: 7f5a0f98b3449d0a95fd6c12f1d6fa61b835fc2b)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These libraries are needed to ensure when the -fstack-protector flags
are used the compile will complete and not fail due to missing libraries
[YOCTO #4586]
(From OE-Core rev: 543ede707a268ca17f972be54860e455b4de9e0b)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Only version number and release year changed in license text.
(From OE-Core rev: 776fa3e49db312bcfd71c6b0637c989ad36fc84b)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The tuning files for the cortex-a* processors are mostly identical for
the A7,A8,A9,A15 processors. Rework these files to use a CORTEX_ID
variable to setup the tuning for each specific processor.
(From OE-Core rev: 3e4f4a1cf07ff7cf4c71566492385f8fbf581789)
Signed-off-by: Andy Voltz <andy.voltz@timesys.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The modules-${MACHINE}.tgz should link to ${MODULE_TARBALL_BASE_NAME}.
But now it links to an invalid file ${MODULE_TARBALL_BASE_NAME}.bin.
Remove the extra .bin suffix.
[YOCTO #4595]
(From OE-Core rev: ef9fad8fff1c413bc0eab15625f051d4e2d0a201)
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* the IMAGE_TYPES variable is used exclusively by hob
* IMAGE_CMD_ubifs is already present in the class
* ubifs images can be flashed on existing ubi volumes with 'ubiupdatevol'
(From OE-Core rev: 0dc5a90b2d95ad21025769b0300390a4ff0052ac)
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Base this on DISTRO_FEATURES, because we don't want it
unconditionally enabled.
(From OE-Core rev: 6956fb01e0c7332e4d8b59cbcb1cd997c54191fc)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The PACKAGEFUNCS_append = "do_package_qa_multilib" lacks a "space",
which would cause unexpected errors.
[YOCTO #3190]
[YOCTO #4396]
(From OE-Core rev: acd5fc716bc3095d568bd1474b79f3a0fd616eea)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Refactor packaging sanity tests from package.bbclass to insane.bbclass
so that the message can respect WARN_QA (print the warning message and
go on the task) and ERROR_QA (print the error message and fail the
task).
- For the bb.warn(), give it a message name and add it to WARN_QA, then
use package_qa_handle_error() to handle it.
- For the bb.error(), give it a message name and add it to ERROR_QA,
then use package_qa_handle_error() to handle it.
- All the bb.warn() and bb.error() have been replaced in
package.bbclass.
- A few bb.warn() and bb.error() in insane.bbclass have been kept since
they can not be replaced or doesn't have to, for example the
bb.error() in package_qa_check_license(), it will print the error
message and then invoke bb.fatal() to fail the task, I think that we
don't have to replace it with package_qa_handle_error().
- Put all the WARN_QA and ERROR_QA in one line, so that they can be
redefined by the user easily.
[YOCTO #3190]
[YOCTO #4396]
(From OE-Core rev: 2f117ee615b703db07d3274ac592e2bd653743dd)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The insane has been inherited by package.bbclass and becomes a
requirement, so we can remove it from defaultsetup.conf.
Note:
You can decide whether to take this patch or not.
[YOCTO #3190]
[YOCTO #4396]
(From OE-Core rev: 875f31facd02b47afb867aed76fef6b89a7b17cf)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
RP's comment:
"What we're trying to do is move everything to use a standard mechanism
for reporting issues of this type (do_package). With insane.bbclass, you
can elect whether a given type of error is a warning or error and fails
the task."
* The package.bbclass had used package_qa_handle_error() which is from
insane.bbclass, and we will use it for handling other warnings and
errors, so let package.bbclass inherit insane.bbclass, this change will
make the insane as a requirement (always included).
* Change the "PACKAGEFUNCS ?=" to "+=", otherwise there would be an
error like:
Exception: variable SUMMARY references itself!
This is because we let package.bbclass inherit insane.bbclass, and
PACKAGEFUNCS has been set in insane.bbclass, so the "PACKAGEFUNCS ?="
will set nothing, then the "emit_pkgdata" doesn't run which will
cause this error.
* Add a QA_SANE variable in insane.bbclass, once the error type
is ERROR_QA, it will fail the task and stop the build.
[YOCTO #3190]
[YOCTO #4396]
(From OE-Core rev: 852dead71387c66ec0cba7c71e3814a74e409560)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade to 1.1.0, and disable the RaspberryPi and RDP compositors. Hopefully
the RPi community can send a patch to add a PACKAGECONFIG for them.
(From OE-Core rev: 2e8e31a6812368688138b53c0aa92982354f832f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's not bleeding edge but it's better than the previous pre-9.1 commit.
(From OE-Core rev: a8b8e21afce050b677e9168e08b3f318aee72e1f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Merge mesa-PV.bb and mesa-PV.inc as the is no point to the split now we're only
building one variant of Mesa.
Drop 0002-cross-compile.patch isn't needed as libtool is used instead of mklib.
However, as libtool is used instead of mklib add fix-glsl-cross.patch to work
around build failures caused by the cross libtool being used to build host
binaries.
Add EGL-Mutate-NativeDisplayType-depending-on-config.patch to build correctly in
a non-X11 environment.
Drop dont-fail-if-libX11-isnt-installed.patch and
fix-egl-compilation-without-x11-headers.patch as they were backports.
license.html had some formatting and typo fixes, update the checksum.
(From OE-Core rev: d7033f4441183e53bf7fc8aa2293a9ec156a28dd)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Only thing changed in license.html is addition of 2013 to
(c) years.
(From OE-Core rev: f994c58e21bc400a98d532095633fba810251300)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of reporting an error when bb cannot be imported, skip the test
instead. This makes it a lot easier to iterate a test suite when we don't care
about this particular test.
(From OE-Core rev: c4a5bd810ca92d57c334113c528bd1d233b3eac4)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Get patch from ubuntu to fix this:
error: GRUB requires a working absolute objcopy; upgrade your binutils
(From OE-Core rev: 18bb555268ecc11d0fb7d4f404a38f1b453f2928)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bdwgc has version names that may or may not contain a revision
(for example 7.2d or simply 7.2). The current recipe specifies
the revision as a separate variable, which confuses the automatic
version checker. This patch enables using the full version name
as part of the recipe name.
(From OE-Core rev: 662b485e155257695ac7cc47f4cd26ddf94720ba)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
upgrade from 1.6.1 -> 1.6.2
- removed patch contained upstream
- minor changes in png.h and LICENSE file ( changes
regarding the date )
(From OE-Core rev: c71a175add6493a2a419e46ab0ef96cbd3fcb70a)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Something along the lines of pngversion.patch was merged upstream, so drop that
patch.
Also use the new trim_version() function for a future-proof SRC_URI.
(From OE-Core rev: 30b32addd189e7acce73965c9176227d5f392ab9)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For weston-launch to be used by a non-root user, the user either needs to be a
member of the weston-launch group or own an active systemd user session. Create
this group so users can be members of it.
(From OE-Core rev: 02e486ec9321fd3d7769c70979207335847a8f92)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds an image that boots directly to Weston on KMS/DRM, and includes the
Weston terminal and gtk+3-demo for incredibly basic testing.
(From OE-Core rev: 18d88072f1392bbd98036f877c46c213af5b9722)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
weston-init is a very basic init script to start Weston as root on KMS/DRM.
To re-iterate, this runs Weston as root. This will be fixed to use
weston-launch shortly.
(From OE-Core rev: eba825e4698f6923c32c347eb306abe9d7f3519d)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since gst-plugins-package.inc is going to be used by the following
GStreamer 1.0 recipes as well, LIBV has to be set outside of the .inc file.
(From OE-Core rev: 3cda3f1e3081ce51d8e964feff29e44558076522)
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The -meta packages were depending on non-existing packages,
like -glib and -apps. The fix checks if packages in the PACKAGES list
are empty. If so, they are omitted from the rdepends list.
(From OE-Core rev: 7c556a1f437c0a5b472727f89ff6c3d5f835b63d)
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The license didn't modify, just the license years (2012->2013).
(From OE-Core rev: 8085ccf585b7d7f70f47362308ddacf9aa577649)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Laurentiu Palcu
Christopher Larson
Roy.Li
Jonathan Liu
Andy Voltz
Saul Wold
Randy MacLeod
Ross Burton
Peter Seebach
Felipe F. Tonello
Paul Eggleton
Andrei Dinu
Wenzong Fan
Hongxu Jia
Marko Lindqvist
Carlos Rafael Giani
Richard Purdie
Cristian Iorga
Yi Zhao
Andrea Adami
Dan McGregor
Robert Yang
Jack Mitchell
Ionut Radu
Jackie Huang
Bogdan Marinescu