_bsddb module in python 2.7 could be built only with db version
between 4.1 and 4.7. A patch was added to avoid build warning
about this for [YOCTO #1937] but not actually fixed it.
This patch enable _bsddb module be built with db 5.3, and remove
--disable-statistics from the DB5_CONFIG to fix segmentation fault
when using _bsddb module in python.
[YOCTO #2749]
(From OE-Core rev: 11267f8a1ccf65142988b095351a84b0fa0fcbcf)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tclConfig.sh is changed in do_install for cross compile and
is installed to STAGING_BINDIR_CROSS, but if SSTATE_DIR is set
and tcl is from sstage, tclConfig.sh can't be found in
STAGING_BINDIR_CROSS, add ${bindir_crossscripts}/tclConfig.sh
to sysroot stage can fix it.
[YOCTO #2891]
(From OE-Core rev: 7a97abb3f1c2ff8fd2dc7c59f866430cf99ab82d)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we don't do this, a stale limits.h may be detected in STAGING_DIR_TARGET
which would result in a different limits.h getting generated by gcc-cross-initial
that references it. The referenced limits.h will then not get found by eglibc-initial
causing rather strange build failures.
The simplest solution is to create a temporary sysroot containing only the things
gcc-cross-initial should care about and this results in a correct limits.h file
regardless of what else may have been built.
(From OE-Core rev: 9c304eae0724474902fe2f3150adc6af115af9ba)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some patches (disable_goops_optimizations, fix_cross_compilation) don't
seem to be needed anymore. Others (change-install-data-hook, mark-unused-modules)
were updated to work on 2.0.6. Tested by building and running guile under
QEMU with core-image-sato-sdk and also builing guile on MIPS.
(From OE-Core rev: 310f169d3d89f3a4fc6a540974a30c7eb565db3a)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
--install-lib= is required to be passed via distutils install
otherwise the install location gets set to whatever the python-native
location is.
(From OE-Core rev: d8ca8b21c6959e772fa1b437ce498b7759fae0ab)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is needed so that all SDK binaries have the PT_INTERP section
size set to 4096 (max path size in Linux) in order to be able to parse
the binaries later and change the interpreter to the path we want.
(From OE-Core rev: 9bf657bbdfe7c1a9dff1cc121eab496e3e407197)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this set, in the case host=target (which it does for on-target
gcc), the native header directory is set to the target sysroot with
no prefix. This means it would look for sdt.h on the build system
instead of in the target headers and this can lead to build failures
and is host contamination of the build.
The correct fix is to explicitly set the native header directory to
the correct location and then the headers get detected correctly.
(From OE-Core rev: 404d2d490fc347203e89d274530c17fb5f0aa20f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In guile meta/Makefile, what install-data-hook do
must be run after install-binSCRIPTS.so it's a exec hook, not a data hook.
If keep these exec-hook in data-hook,when we run make with multi-jobbing ,
install-data-hook and install-binSCRIPTS will be separately
processed in different thread, no any dependence.
that will cause error sometimes.
[YOCTO #2796]
(From OE-Core rev: 018d5b87bdf00e85fe34e6276bd99e118843d704)
Signed-off-by: Song.Li <Song.Li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This update replaces the half-baked --arch logic with the use
of $CFLAGS to pick compiler flags, on the grounds that it makes
a lot more sense for the build system to pick flags than for
pseudo to try to guess what they should be; this should allow
pseudo to at least compile for targets, and possibly run on
them.
This doesn't solve the problem of guessing how to forcibly
build the 32-bit variant on hosts, because we really don't
have a general solution for that. There's no idiom for "given
this set of compiler flags and this architecture, what flags
would you use to request a 32-bit compile instead?" So we
basically ignore that for now. If someone comes along trying
to use the build system to build pseudo-native on a 64-bit
host that also supports 32-bit binaries and isn't x86, we
will revisit this.
(From OE-Core rev: 711fcb4f10e2cefd7ff6e1921d87d1cad840d0c8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reduce the number of calls to the packaging tool, especially in the case
of rpm, using helper utilities to gather the required information more
efficiently where possible.
(From OE-Core rev: d0b8a98c5b46c305afd389fc862b3bf0c6f1eaab)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Improve the performance of the RPM backend during do_rootfs by
performing most of the package name to file resolution in a separate
utility written in C, processing the entire list of packages at once
rather than running rpm on the command line which loads the RPM database
for every package.
(From OE-Core rev: 9135d351ba7cb21e50239d2b310565680bd4fdca)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
follow Richard's approach, modify bzip2-native recipe to install bzip2 package
binaries to STAGING_BINDIR_NATIVE/bzip2-native to avoid problems when other
package is doing upack to reference bzip2. libbz2.so* still installs to
STAGING_LIBDIR_NATIVE.
change python-native to depends on bzip2-replacement-native instead of
bzip2-full-native and add EXTRANATIVEPATH for bzip2-native.
Didn't add bzip2native.bbclass as python-native is the only user so far.
(From OE-Core rev: 5bf3541836457465aa76577bfb41cdf6316213c9)
Signed-off-by: Yao Zhao <yao.zhao@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #2812]
Since files installation dirs are DESTDIR/etc/, DESTDIR/sbin etc
in Makefile, not DESTDIR/${sysconfdir}/, DESTDIR/${sbindir}/, for
the native package, a prefix can not be inserted which is needed
when do the next step of install and do_populate_sysroot.
Now we define do_install_virtclass-native in which DESTDIR is
${D}/${STAGING_DIR_NATIVE}
(From OE-Core rev: bb80a5f6f383d874b314af4263695e5a6b2d84cb)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I caught this when running user mode qemu for ppc/e500 applications
which had SPE instructions in them will abort with illegal instruction
error all the time.
The patch is already applied upstream we needed a backport into 0.15.x
(From OE-Core rev: febec229b27279345b756d2fd83f3766915fcd67)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The pkg.m4 file should be packaged as part of the base package
instead of the -dev package, it had been in the base package, but
I seemed to have missed that it moved during my PACKAGES reorder,
and this caused the meta-toolchain to break
[YOCTO #1908]
(From OE-Core rev: d2dba9aebef323a57824b41d09991850c703be35)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was causing the x86_64-linux-guile script to not have all the
environment bits needed
V2: Forgot PR Bump!
[YOCTO #2835]
(From OE-Core rev: be89b81bdad0489d43d33342243b5d1da76ec3c4)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #2829]
mtools commands use cp850 as the "mtools_default_codepage", they would
use this to do some coverting tasks.
So, add glibc-gconv-ibm850 to RDEPENDS for mtools commands to run
correctly.
Also add other MSDOS/FAT codepages related packages to RRECOMMENDS.
Code Pages for MSDOS/FAT:
*http://msdn.microsoft.com/en-us/library/cc195051.aspx
(From OE-Core rev: 5333610bb4b5014372a11e283465ff0f819db49d)
Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update to 1.60
(From OE-Core rev: 987c57c9a19706067f1590e0f647557a870f769c)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
currently gcc installs a limits.h which references to another
limits.h which it expects from target sysroot and that header
in target sysroot will come from eglibc. So we need to break
this catch-22 and hence we install a self sufficient limits.h
which is then happy when referenced and doesnt complain about
missing limits.h from target sysroot.
This is mostly used when eglibc-initial configure is run
(From OE-Core rev: eeb445ecbc651ad614a4fc492039bdad0747d45d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
remake is a patched version of GNU Make that adds improved error
reporting, the ability to trace execution in a comprehensible way,
and a debugger.
[YOCTO #2402]
(From OE-Core rev: 823fab378bd46da6a296a67f981dffb31b1c8061)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_package writes out shlibs data and libgcc can depend on the values
there. We therefore need to express the depdency so that sstate can account
for it for example.
Without this a version change in eglibc can "psersist" in the sstate cache
and corrupt builds.
(From OE-Core rev: 4148bc80c008d25c8a536c7c7dfdeac1669a6662)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add pythonnative to the inherits list
(From OE-Core rev: 0751ba97969bf7ef21e0c9a0bbe52001052f02af)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add pythonnative to the inherits list
(From OE-Core rev: a043a7737da1123df5ff06ede3e9ed1fdcc163f1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add pythonnative to the inherits list
(From OE-Core rev: 7f3105d380370ae1f4fbc2e8295c80f22dfb16cc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add pythonnative onto the list of inherits and update the paths to the binaries
referenced in the recipe to the new paths.
(From OE-Core rev: 284a65d55f0ffad0f4f7f32d72da0f9410578643)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update python-native to install the binaries in the python-native directory,
add pythonnative.bbclass to let recipes that need python-native use the
binaries and update disutils access the new binaries. Update distutils-base
to inherit pythonnative.
(From OE-Core rev: a2e554f731437545e9483a7a73e6847c03f6f48a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These repos are not setup to serve through http protocol
(From OE-Core rev: add617cbeac9fcf4621cca45a0800c5ab6239c5a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
e.g. libfl from flex is needed for target
binutils to link otherwise it can fail to build
(From OE-Core rev: 627725700ee9e2ca39a19f19a77cd772cd8ecf9f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bb and os modules are always imported so having these extra import calls
are a waste of space/execution time. They also set a bad example for people
copy and pasting code so clean them up.
(From OE-Core rev: 7d674820958be3a7051ea619effe1a6061d9cbe2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
TCL_INCLUDE_SPEC -I/usr/include will cause problems cross configure/compile
TCL_LIB_SPEC -L${libdir} will cause problems too when link.
(From OE-Core rev: d454f8055b21c4d01dd1e2faf1625e2a1e5c25f2)
Signed-off-by: Yao Zhao <yao.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
nasm has a build dependency on groff-native
In one incident, there was a case where nasm-native compile phase failed
with the following:
+troff: can't find `DESC' file
+troff: fatal error: sorry, I can't continue
During this, groff-native was in the sysroot install phase.
To remedy this, adding groff-native in nasm's dependency list.
(From OE-Core rev: cd108a55ea58501e91923f348edca9ba736933c7)
Signed-off-by: Amy Fong <amy.fong@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove brute-force flattening and bump PR.
Refer to -ftree-switch-conversion emit_case_bit_tests(),
-ftree-if-to-switch-conversion et al in 4.8
(From OE-Core rev: 2eb0e56217137ece3d86a70676a3f3c8db525459)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Many recipes are now having to define PERLPATH and PYTHONPATH variables.
Creating USRBINPATH in bitbake.conf means we can remove all these lines
from the many recipes now needing this and simplify the code changes
needed in each case, reducing the chance of errors being introduced.
Also fixup glib python binary location issue and fix function indentation.
(From OE-Core rev: cf63d9068c3a8c635dfc240d30dfff278be9b0e2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemu.inc: on older kernel build hosts that have < 2.6.20 which
doesn't support kvm yet, build will fail. Add a check in do_configure
to make sure whether linux/kvm.h exists for nativesdk build.
(From OE-Core rev: 7d49af3a811472a2a47453bef0813b89c6331ae7)
Signed-off-by: Yao Zhao <yao.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This would fail in some firewall situations otherwise
(From OE-Core rev: 4c1a768238fe9a36b7ed714c9c40951b7357410a)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We require git version 1.7.5 or later for the git remote --mirror=xxx syntax.
If we have an older version of git, this patch ensure we build git-replacement-native.
We add an alternative PROVIDES in the same way as tar-native to allow this script
to trigger the build whilst still allowing git-native in ASSUME_PROVIDED.
(From OE-Core rev: 269f3b3cfacaf229d5e45177ee01b16561370ee3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using gold as default linker in final toolchain
gcc-cross-initial still needs to use BFD ld since it
will link eglibc-initial
(From OE-Core rev: f643f886b16f586426c744afde080a99d71a9d58)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch fixes building this tool in cross environment
It uses tools such as CC, HOST_CC, I386_CC etc.
and as long as you are building native it does not
matter since they all are same namely 'gcc' but
in cross compiling that wont work. So we make the
makefiles and configure scripts aware of that fact
Upstream hosts this program in a svn repo. So change
the SRC_URI to official svn repo. With git we were
checking out a lot more that just mkelfimage which
is not required.
There were unpackaged empty directories too so
we make sure they are removed as well.
Fixes Yocto bug# 2765
(From OE-Core rev: 0d828f19f7ef2d852bbe6da4510efea76a39b982)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds a fix where arm endianness is detected correctly
secondly it adds a missing dependency on libatomics-ops
which was found when build in clean tmpdir and populating
it from a valid sstate.
(From OE-Core rev: b537b035c9b9c9a1174dcafc0252c2b779b17902)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
svn has been giving troubles with svn 1.7 upgrade
Remove duplicate definition of S and B variables
from gcc-4.7.inc
Use 4.7.1.0 for PV to maintain the upgrade path
Its an interim solution once we upgrade to 4.7.2
we will drop it.
(From OE-Core rev: 3f3b74b3fd6ba813dd69804706edcea145876e09)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Default seems to be to enable GL accelaration so when
gl is not specified in PACKAGECONFIG then add the
--disable-gl-accel to really disable it.
(From OE-Core rev: 039a2f63712cbe87eb68a8c8c0cc365b74651f5a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These patches are backport from gcc mainline
they fix issues where eglibc was not compilable
for e5500+ due to missing vector intrinsics
It obsoletes the existing e5500 patch
(From OE-Core rev: b440aeeceb8c2e9f412d98793fb1dd55ff9d73f5)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This updates the E5500 and E6500 support patches
as they have been applied upstream binutils.
(From OE-Core rev: 202420871785cbdbbf57adbe26eb0f649e57512b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_headerfix task is essentially editing configuration
headers in sources which can well be maintained as a
patch which is easier to spot errors (if any) than
dynamically edited source tree
(From OE-Core rev: ddd344e9acef88d614473581266569ce14716ccc)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch fixes two build issues seen with strace
one in general with eglibc 2.16 and another with x32 abi
(From OE-Core rev: 2ed0011adc1642e0fbb6bfe1d7ae6b70ce7dfedb)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These recipes use gnulib which needs this change to use gets
when its defined and not otherwise. Until that change goes into
gnulib and then all these package upgrade gnulib in their sourcebase
we patch them
(From OE-Core rev: 3148460575b65cb681065e5850b8afb96056d712)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If EXTRA_OECONF_FPU is left set, certain ARM variables related to hard-float
can get pulled in and trigger rebuilds of the crosssdk code. The best solution
is to simply force the variable to a known correct value for the SDK targets
currently supported in the same way as TARGET_FPU.
There is some slight rearrangement of the gcc code to ensure the variable is
always used to call the fpu function.
(From OE-Core rev: 410990445ada8cdcfaec4e6fa5791cee9a5b8983)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, python-nativesdk-crypt can depend on openssl which is incorrect.
(From OE-Core rev: 5740696c81a9143504c1cb93e94c54add27896e4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
| dbconvert.o: In function `rpmdb_convert':
| /local/jenkins/jobs/yocto-upstream/workspace/label/master/machine/p4080ds/poky/master/tmp/work/x86_64-linux/rpm-native-5.4.9-r45/rpm-5.4.9/tools/dbconvert.c:126: warning: the use of `tempnam' is dangerous, better use `mkstemp'
| dbconvert.o: In function `main':
| dbconvert.c:(.text+0x923): undefined reference to `htobe32'
| dbconvert.c:(.text+0xaa4): undefined reference to `htole32'
| dbconvert.c:(.text+0xac9): undefined reference to `htole32'
(From OE-Core rev: add2c772cd404e8bea4828959fcb5ee33c35c048)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Address QA issue: Files/directories were installed but not shipped.
New revision contains patch to mkelfimage removing
/usr/share/mkelfImage/elf32-i386 directory from Makefile install target.
http://review.coreboot.org/#/c/1195/
(From OE-Core rev: 7dd161816ccbb03db4f86902f96d3e86e09ccb64)
Signed-off-by: Raymond Danks <ray.danks@se-eng.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes the issue where gcc invokes the linker with an incorrect -L
library location and gives up because it can't find libraries. It was
looking in a /lib folder instead of /lib64
(From OE-Core rev: 1b428f0151a5b86332b501871bf4a925b43580a5)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When run valgrind, following error appears:
==2254== FATAL: can't open suppressions file "/usr/lib/valgrind/default.supp"
(From OE-Core rev: 0b3261d513cdad80174a9b9e804981c50bcb7ca2)
Signed-off-by: Zhenhua Luo <b19537@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
install-neon-lib needs libsvn_delta-1.la which will be regenerated
during libsvn_delta-1.la's installation, if libsvn_delta-1.la is
in regenerating and at the same time install-neon-lib links it, the
error willl happen.
The error message is:
/bin/ld: cannot find -lsvn_delta-1
collect2: error: ld returned 1 exit status
This is a parallel issue, so it doesn't happen often.
Note:
The autoreconf doesn't generate build-outputs.mk, it would be generated
by autogen.sh (use build.conf as the input), but autogen.sh isn't
suitable for cross compiling, so both modified build-outputs.mk and
build.conf.
[YOCTO #2727]
(From OE-Core rev: ce37c45abb4cf43e5009867f695982de2eb33450)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE-Core revision ffe93e2a099e4cadb1829dc12a58a6d7bef9a5a7 moved opkg's
configuration file into /etc/opkg, and opkg always reads all files under
this directory even if -f is specified (as it is during do_rootfs in
order to specify our own generated config file), and this means that
after opkg-collateral is installed into the rootfs, this version of the
config is used, resulting in opkg ignoring the list of packages it has
already downloaded (since it now sees list_dir as /var/lib/opkg instead
of the default /var/lib/opkg/lists) and thus it fails to install any of
the "attemptonly" packages (including *-dev, *-dbg, etc.).
If we change the -f option to ignore configuration files in /etc/opkg
then we no longer have this problem.
Fixes [YOCTO #2595].
(From OE-Core rev: 37df134557802ba116f001597b7cd5e9bc39e188)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
MakeMaker has a bug where it does not propagate CC/LD/etc information
down to subproject it generates Makefiles for... this recipe has has an
Expat subproject which has issues building if we are using sstate-cache
and it will reference the old sysroots and be unable to build properly.
There is an upstream MakeMaker bug for this issue but we can work around
it by fixing up the Makefiles for now
See:
https://rt.cpan.org/Public/Bug/Display.html?id=28632
(From OE-Core rev: 2c3629a698e537c69c71039bc6172b3c0e617ff1)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yocto bug #2639. If a chroot path was long, expanding absolute
paths within the chroot path could overrun a buffer.
(From OE-Core rev: 282cbf7002112f6b58ca1ee070c0b1285b838db7)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the length of the tmpdir is longer than 400, there is an error
when run "apt-get update":
Method file has died unexpectedly!
This is because the "char S[1024]" is not enough for long URI, S[2048]
would be enough.
[YOCTO #2689]
(From OE-Core rev: 3ed08bd24cef39a85c528159a494e8f0dd001739)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
when the tmpdir dir is longer than 220, there is no files saved in
tmp/sysroots/x86_64-linux/var/lib/apt/lists/ after run apt-get update,
this is because apt-get uses the path as the file name, but the file
name can't be longer than 255 according to /usr/include/linux/limits.h.
[YOCTO #2688]
(From OE-Core rev: 9a0c0393871eda4bbcecfdd4b595f0c1b8e42edf)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed because the equality check was failing here even though upon
printing the LHS and RHS were the same.
As per http://stackoverflow.com/a/2987975/64537, using "is" compares the
memory addresses of the two objects which is not what we want here. We
just want to compare the values.
(From OE-Core rev: 7fd82cc90a48302ed42b6bfa962bb0de2c652b45)
Signed-off-by: Kartik Mohta <kartikmohta@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
neon requires expat to be built first
lua similarly requires expat if enabled
selinux package name should be "libselinux" (from meta-selinux).
(From OE-Core rev: 6b3c9802b659ca1d3b7638ff80e6492cc0e16d6f)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When use PACKAGE_CLASSES = "package_deb", and the length of tmpdir is
longer than 177, the error occurs during the image generation:
/very/long/path/totmp/sysroots/x86_64-linux/usr/bin/dpkg-scanpackages:
bad interpreter: No such file or directory
The interpreter is perl, and it does exist, this is because the first
line:
#!/very/long/path/to/perl
in the script can't be very long.
Create a wrapper for it would fix the problem.
[YOCTO #2640]
(From OE-Core rev: 7d3281be18567207de8ce2cabce03957bf2cbca8)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We added the autoconf cache line a while back to ensure that configure doesn't
poke into some hardcoded host paths looking for things it shouldn't. Applying
it as part of do_configure wasn't getting it to the do_compile tasks
where much of the configure scripts are run by gcc. This changes it to a simple
export to ensure it reaches the places it needs to and truly gets rid of
the cross compile badness messages from the logs.
(From OE-Core rev: af58d5c3a5c5e632aa20b1d007d47dbbfb4ed6e6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
archlibexp in the snapshotted config.sh needs to be relative to
staging dir - it gets generated into Config_heavy.pl as one of the
settings and is used by ExtUtils::Embed during the target build.
The substituted setting doesn't make it into the target package
because it's removed by perl_package_preprocess() before packaging.
(From OE-Core rev: b647d2ab84ff0eb94f4b6a1b731d74aaf8c60b9d)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For some config.sh substitions, we'd like to be able to use
STAGING_DIR_HOST; add @STAGINGDIR@ to allow for that.
(From OE-Core rev: cc594be0877b2a6616453c402db0a58ef265bc8d)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Things like ExtTools expect to find libperl at the original
(${libdir}/perl/${PV}/CORE/libperl.so) location, so keep it there but
symlink to it for the original (?) reason.
(From OE-Core rev: deb5d5ededfc404f4c54b18f3dcf8192e1c835e0)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This enables a switch to subversion 1.7 now bitbake is able to cope with
upgrading existing working copies. The impact of this change should be
minimal since we don't have many subversion recipes now.
(From OE-Core rev: ac0aa35ba6d7a21636bdd23d45ae0bf8112bdaa8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using Gentoo Linux as the build host, it fails without this patch
Use Getopt::Std in place of getopts.pl.
https://bugs.gentoo.org/show_bug.cgi?id=420083
which following error:
/usr/bin/perl -w ./../msggen.pl -l jstyleModule InterpreterMessages.msg
/usr/bin/perl -w ./../msggen.pl -l jstyleModule DssslAppMessages.msg
Undefined subroutine &main::Getopts called at ./../msggen.pl line 22.
make[2]: *** [InterpreterMessages.h] Error 2
make[2]: *** Waiting for unfinished jobs....
Undefined subroutine &main::Getopts called at ./../msggen.pl line 22.
make[2]: *** [DssslAppMessages.h] Error 2
(From OE-Core rev: 169a89b10817b742c063fcd76721e4dbbcca6199)
Signed-off-by: Dennis Lan <dennis.yxun@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kconfig-frontends provides the kconfig infrastructure
thats used for linux kernel as a standalone package. Its
not intended to be used for kernel itself but can be
used by packages who are based on kconfig e.g. busybox
uclibc or new packages who wants to use kconfig infra
for the package build
kconfig-frontends names it's shared library as -3.4.0.so instead of .so.3.4.0,
this causes the -dev package to grab it since it matches on *.so. This error
would also have shown up with the old PACKAGE order.
(From OE-Core rev: 705baf06d151eb4f9dcae7b23c7f3e57c0c09a74)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
include-unistd.h-for-gcc47.patch is no longer needed, since it was fixed upstream.
(From OE-Core rev: 54429dfcca0e35a3aeaa78e509240b87d6a8f4ac)
Signed-off-by: Jonathan Santos <jrsantos@jonathanrsantos.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
uclibc has some functions in librt that are needed
by bison build.
(From OE-Core rev: 987bc3ff3e1a619132434c5d939c7035d3d19fcb)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was needed because on eglibc based builds we did not
define USE_NLS but now we define it in default config to have
a valid value so we do not need this here. Moreover it was
wrong and was not covering all cases of uclibc triplets
(From OE-Core rev: fc9492654aab2a6e3f46977193b5a5f388e4ee85)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes build warnings like below
WARNING: For recipe libgcc, the following files/directories were installed but not shipped in any package:
WARNING: /usr/lib/arm-oe-linux-gnueabi/4.7.2/include
WARNING: /usr/lib/arm-oe-linux-gnueabi/4.7.2/include/unwind.h
(From OE-Core rev: f7ec6ea2b32207993e7fc92ed67c08f542007953)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Headers are included in the package for compatibility
* but have not yet been synched with linux 3.0
* The actual issue was that ubi-user.h in sysroot
* was overwritten by the older version.
* Unfortunately one ioctl was renamed:
* http://lists.infradead.org/pipermail/linux-mtd/
* 2011-March/034419.html
* Note: the recipe will still use its own older header,
* following upstream.
(From OE-Core rev: 2a4ab6fc2ef10202d13568aba5d7633e88aa71e5)
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change license file to LICENSE, which now contails both
Artistic-1.0 and GPL-1.0 License text
(From OE-Core rev: b92478f8067e1b69bbe7338e3c0a3b082c6df46d)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
--{en|dis}able-gl-accel is spcefic to gl
patches in 0.15.1 which may not be available
for other qemu's so if someone chooses to remove
gl from PACKAGECONFIG then we dont explicitly
use the --disable-gl-accel option since this
wont be recognised by configure.
(From OE-Core rev: 68a170c9b69fc70b22167f344e6f72f028938066)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sourcery toolchain is available as external pluggable toolchain
if needed.
(From OE-Core rev: 7d0c7a759c29669b2b5828fd75837926506acd87)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If anyone wants it add toolchain-layer from meta-openembedded
repo to your setup
(From OE-Core rev: a78260d8d041e606ce4d10c0bb52f196dd27832e)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit fixes the guile compilation segfault on MIPS/PPC.
Tested by compiling guile with MACHINE=qemumips.
[Yocto #2478]
(From OE-Core rev: e2cc4a44d510e0d473d15f207c1c886db6a5ccf7)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
when using --with-sysroot=/ and --with-gxx-headers=/usr/include/c++
configure eats up one leading / from gxx include dir
fixed thusly
(From OE-Core rev: 51064de5fb92c53c99b21487c0ebcafeaf3cc3ad)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Plugins work well in 2.22+ so lets enable them
helps with lto
(From OE-Core rev: 81ecc9d468c36b36c4b2ccc4ab5f366611a8fa46)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also rearrange the recipes to have common bits
in inc files and not include the target bb file
everywhere. This lets us add specific options
to specific recipes particularly target recipe in
this case
(From OE-Core rev: f4ed063e32f064e996a4c29760fa4ac49f1ed73c)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* there are 2 small fixes
python-2.6 compatibility
missing C option for opkg-build
(From OE-Core rev: f7caea892cf66236bae854dcbaffec9d4a2d09a2)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the new order scheme, ${PN} needs to be in the middle
for the .m4 files to be packaged, otherwise the move the
-dev package which is wrong in this case.
(From OE-Core rev: 57ad9075ea7521e8fa20d62aac31afb2e2130348)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If any directory in leading up to your tmp directory has the name "t"
perl will fail to build with a very cryptic error shown below:
pod/buildtoc: no pods at pod/buildtoc line 305.
make[1]: *** [pod/perltoc.pod] Error 255
This is a result of the perl file checking making an assumption
that it is only looking at files and directories with in the perl
source directory. This assumption fails with the way bitbake
sets up perl to properly cross compile.
(From OE-Core rev: f8a054aca9962ebfd4c74fc1d34cd684de6b3568)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These need to appear in DT_NEEDED for librpmio.so
for uclibc somehow it does not get added to link
cmdline so we do it explicitly.
(From OE-Core rev: e5d141fff4a96fbdac63586638fb286f263af216)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-fstack-protector needs libssp to link with
so when checking for this option support we
need to find if libssp is staged in root file
system
(From OE-Core rev: 492297fce0b80547d3dac9f611f463c6cc95160b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
rpmatch is not there in uclibc therefore add logic to configure
to detect it.
x* wrappers need to be defined for uclibc as well.
(From OE-Core rev: 0cd3a4f3cfd0eb70915e3b59be8d04ee2d92749e)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There would be an "Argument list too long" error when the length of
tmpdir is longer than 190, this is caused by:
headers=`echo $(PLUGIN_HEADERS) | tr ' ' '\012' | sort -u`
The PLUGIN_HEADERS is too long before sort, so the "echo" can't handle
it, use the $(sort list) of GNU make which can handle the too long list
would fix the problem, the header would be short enough after sorted.
The "tr ' ' '\012'" was used for translating the space to "\n", the
$(sort list) doesn't need this.
This doesn't impact the output, so it doesn't need the PR bump.
[YOCTO #2591]
(From OE-Core rev: b9b75e6cf31991c046713194f75bc61027558464)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the x32 specific patches, since they seem to be fully
integrated into 4.7. Also removed the sigmask patch, since the
new version doesn't seem to use sigmask anymore.
(From OE-Core rev: fec92fb65a0135b17fea49a239bd9a73c96bba51)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On Fedora 17, bash has moved to /usr/bin/bash and the configure process finds it
on the host machine there, this ensures that it is set correctly for the target.
[YOCTO #2363]
(From OE-Core rev: 958934049e4b3b84e5eaa9c6b0d672cf2c4a693e)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* We use meta/recipes-devtools/opkg/opkg_svn.bb by default, the
opkg_0.1.8.bb failed since no checksum specified.
* The add_vercmp.patch in both opkg/ and opkg-0.1.8/, remove the one
in opkg-0.1.8/
This patch doesn't impact the output, so I think that we don't have to
increment the PR.
[YOCTO #2498]
(From OE-Core rev: 316fac638646a50149f36ec4687b5a2a6d2e83b1)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise it assumes / as sysroot on build host and starts
searching for directories in there.
[RP: Tweak to add missing = for consistent syntax]
(From OE-Core rev: d132bcc41d9956f8cc171e34232d991e2b444689)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently since configure.in in is in a subdirectory, we don't reautoconf the
recipe. We really need to do this, to update things like the libtool script used
and fix various issues such as those that could creep in if a reautoconf is
triggered for some reason. Since this source only calls AM_INIT_AUTOMAKE to gain the
PACKAGE and VERSION definitions and that macro now errors if Makefile.am doesn't
exist, we need to add these definitions manually.
These changes avoid failures like:
----
| ...
| DssslApp.cxx:117:36: error: 'PACKAGE' was not declared in this scope
| DssslApp.cxx:118:36: error: 'VERSION' was not declared in this scope
| make[2]: *** [DssslApp.lo] Error 1
----
(From OE-Core rev: 6f0d830ed047f700702645d454054dfd6fea6f25)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Force pkg-config to only look in the install directory, and not be
able to fall back to system pkg-config directories for resolution.
(From OE-Core rev: 7afcfeb1db00c800485b2f3a89dad1ed84083979)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add functionality to RPM to directly query the packageorigin (path) from
the resolver database, instead of having to do this via an indirect method.
This results in a minor performance improvement.
(From OE-Core rev: a8ff3141fd78442bf328c9d3a489db88ad27486b)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
RPM 5.4.9 now strongly encourages you to have the ossp-uuid library available.
Add this recipe, and change RPM to use the uuid functionality.
(From OE-Core rev: 8a2b55c5b7c544ec15113bc21e5c62276449c9c3)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Beside upreving RPM, add necessary integration patches to libzypp.
Also change the configuration of RPM to support PACKAGECONFIG flags.
RPM is highly configurable, the default configuration is good for
minimal OE-Core use.
(From OE-Core rev: bf94103d4c532ffdfdcdcc6d27c9f65f7824f8f8)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
RPM 5.4.8 requires db 5.3.x, so both are upgraded together.
(From OE-Core rev: c5898ef3fc3820ff9c44bc5b1b16e5def64aa877)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
TARGET_ARCH is poured into TRANSLATED_TARGET_ARCH
for gcc-cross family or gcc-crosssdk family
of recipes we have to check for TRANSLATED_TARGET_ARCH
(From OE-Core rev: 03f7322b1f4e1b1cf465a46cba3b82573384ab9e)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to check target to be arm before enabling hard-float
ABI. There are crossdk targets or candian-cross targets built
for arm and we should not enable it for those class of recipes.
(From OE-Core rev: f48bb903218e14ba15dab452e8bb43ba25b9ea44)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
linker should add -lssp to linker cmdline when
-fstack-protector therefore add this knowledge to libtool
otherwise packages will fail to link
(From OE-Core rev: d1756ff379ab310bfa6323d8643b7e9d764f94bf)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is reported by prelinker which does not
go well with textrels.
(From OE-Core rev: 7b1caeca8e5c0dd066bb940fe6d2dff4d22bf816)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
apt do_compile failed with gcc 4.7:
deb/deblistparser.cc: In member function 'virtual short unsigned int debListParser::VersionHash()':
deb/deblistparser.cc:212:13: error: redeclaration of 'char* I'
deb/deblistparser.cc:202:22: error: 'const char** I' previously declared here
Backport the patch from the upstream would fix the problem, both target and
native apt need it.
[YOCTO #2488]
(From OE-Core rev: fae7fc49052720f037bac128084851c09d420381)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch had a little problem, it made a infinite loop:
for (K = CmdL.FileList + 1; *K != 0; J++)
But the value of "K" will nerver change, so the apt-get hangs, revert
this patch first, and will fix the problem in another patch.
Note: Increment the PR from 11 to 12
Revert "apt: Fix a latent bug exposed by gcc 4.7"
This reverts commit 9d526462fe.
[YOCTO #2488]
(From OE-Core rev: 1e381c83396a65c6c93b8fc1f4e35564c52bd042)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add an PACKAGECONFIG in qemu to disable GL acceleration:
* By default configure try best to enable GL acceleration and fail when missing
host dependency(libSDL and libGL).
* End user can also choose to turn off GL capability, thus remove the host
dependence in building.
[YOCTO #2407] got fixed.
(From OE-Core rev: cfa93553e17057a1ea9d81e3a415fc8260c54067)
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patches this recipe refers to don't exist so nobody can have
been using this so lets just remove it.
(From OE-Core rev: 29916bfbbea3bb785e8e4d332848b19ebc0a3ea9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was no explicit path in FILESPATH for this recipe to allow it to
find files referred to in SRC_URI (files shared with the standard opkg
recipe). This problem may have been masked by the fetcher behaviour of
looking for files last in DL_DIR, thus if opkg has been fetched
beforehand there would have been no error.
(From OE-Core rev: 0ddf7861d36452c0fe40b4ce439a2954de507965)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is disabled by default to ensure a deterministic build, qemu
configure would sometimes detect the libjpeg and then enable this.
Since mostly qemu is used locally disable by default.
(From OE-Core rev: 0f795f81fe5ad3ef78c21a177eca90fbc8810f81)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Valgrind supports the armv7 architecture, this patch allows armv7 users to build and use Valgrind
This patch was run-tested on a Gumstix Overo (armv7a cortex-a8)
* The test consisted of running valgrinds memcheck (memory leakage detection),
* and callgrind (profiling) on a Qt 4 application
(From OE-Core rev: 211ac8b39023d4998fb7d5a577b63a4960b08172)
Signed-off-by: Samuel Stirtzel <s.stirtzel@googlemail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Bump every recipe inheriting distutils or setuptools and
not overriding do_install without calling distutils_do_install.
(From OE-Core rev: 61487342764684cacef765e221609fe16ffc2740)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While building libtool, the libtool script itself will be regenerated
because OE modifies a dependency[1]. With -jX, this operation (-->
removal, creation of non-x file, 'chmod a+x') can happen at a time when
the script is going to be executed. This can cause errors like:
| arm-linux-gnueabi-libtool: compile: ccache arm-linux-gnueabi-gcc ...
| ...
| /bin/sh ./config.status libtool
| ...
| arm-linux-gnueabi-libtool: compile: ccache arm-linux-gnueabi-gcc ...
| /bin/sh: ./arm-linux-gnueabi-libtool: Permission denied
| make[2]: *** [libltdl/libltdl_libltdl_la-lt__alloc.lo] Error 126
I am not sure whether the custom do_compile_prepend() is still needed.
For now only the issue above will be fixed by executing ./config.status
yet again.
[1] see 648290d5bf
(From OE-Core rev: e065c11b6066f8c1d37496b58dd853a684cd9136)
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a bug if we:
1) bitbake diffutils with MACHINE=crownbay
2) bitbake diffutils with MACHINE=qemux86
3) bitbake core-image-sato with MACHINE=crownbay
Then the diffutils.i586 would be installed to the crownbay's image, this
is because diffutils.i586 is newer than diffutils.core2, and rpm doesn't
respect to the arch priorities:
We have put the archs in order in _solve_dbpath:
crownbay/solvedb:core2/solvedb:i586/solvedb:all/solvedb
Fix rpm to respect to the order, for example, if it finds a pkg in both
core2/ and i586/, and the core2/ comes first, it should not use the one
in i586/ even if it's build time is newer.
Note: Don't worry about the _free(*ptr), it can check whether ptr is
NULL or not.
This is for the denzil branch, and the master branch also needs it.
[YOCTO #2360]
(From OE-Core rev: d76067ae100623dd6dd4858568b98522d1daf474)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If callconvention-hard is set then we build gcc defaulting
to hard-float ABI
(From OE-Core rev: 88dee5cf5265d3ea26fc9d471fc6155e48935dc7)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jackie Huang
Richard Purdie
Bogdan Marinescu
Mark Hatle
Laurentiu Palcu
Song.Li
Martin Jansa
Peter Seebach
Paul Eggleton
Yao Zhao
Roy.Li
Florin Sarbu
Khem Raj
Khem Raj
Saul Wold
Xin Ouyang
Kang Kai
Wenzong Fan
Morgan Little
Amy Fong
Bernhard Reutner-Fischer
Matthew McClintock
Nitin A Kamble
Raymond Danks
Zhenhua Luo
Robert Yang
Kartik Mohta
Tom Zanussi
Dennis Lan
Jonathan Santos
Andrea Adami
Jason Wessel
Zhai Edwin
Radu Moisan
Samuel Stirtzel
Andreas Oberritter
Enrico Scholz