The width of the combo boxes drop down should match the combo box
itself.
(Bitbake rev: 93e66f494730d0840dd1d4f3ed924d91e6489995)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dark text on a dark background is difficult to read. Further the design
document uses white text.
(Bitbake rev: a84304ccf06a012817a5e6495d53147efcbed960)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The custom HobNotebook widget was implemented to address perceived
deficiencies in the gtk.Notebook API.
Recent inspection reveals that the API is capable of all that Hob
requires of it and therefore maintaining a custom class to provide
similar functionality does not make sense.
Addresses [YOCTO #2276]
(Bitbake rev: e683caa9863bbb52480346669806f22173629a5e)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
'bitbake -u knotty2' never failed which was caused by main() not
propagating the exit code.
(Bitbake rev: 243e4ba405b88fd466bec7b4aa042d20aa6121ff)
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were some hardcoded behaviours in the system for which backends
support checksums verses which backends recommend them verses which
don't recommend them.
This moves the functionality into specific fetchers and then makes the
general code generic. This cleans up the codebase and fixes some corner
cases such as trying to checksum directories returned by the git fetcher.
(Bitbake rev: ef6d268f7b8527541a7fb044cf95a973be4097f4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, checksums are only checked for remote files. This changes
the check to apply to any file we have checksum data for. A mismatch
against a file is fatal but in the local case, no warnings are shown
about missing checksums.
(Bitbake rev: 80411b3acf2173a4a7d415102d16676eb98363e3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When fetching from mirrors, checksum errors would get buried in the
logs. This raises their profile so a warning is logged on the console
when fetcher checksum issues are encountered, even if other attempts
are made to get the file (which may or may not have the same issue).
(Bitbake rev: d43fafd7f01b5534499b45213197d8ccececdbc4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Under certain contitions such as local file:// mirrors of all files,
bitbake might not check checksums. This is not desirable and we should
always check the checksum where possible.
This only exception to this is the git mirror tarball case where the
checksum is unknown but we need to create the .done stamp for other
reasons. This patch preserves thta functionality but in a more specific
section of code where this doesn't interfere in normal checksums.
(Bitbake rev: 2592a43e422c06a6f6174ada562e9c8ba25e1ec1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Under certain circumstances, bitbake could remove files which were
outside its control since it unconditionally removes ud.localpath.
In the file:// case this can point at external paths.
This patch converts it to use the clean() method which will remove
files when its safe to do so but not in the file:// case since the
file:// handler has an empty clean method. This means bitbake no
longer removes files outside its control and is generally much safer.
(Bitbake rev: 9ad1cebe2220b41da2141cdb3f0a403abb46d77c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We anticipate signatures being shared amongst peers in a group so ensure
they have rw-rw-r-- permissions to facilitate this.
(Bitbake rev: e4716f316152cafabebcefec7b387edeb02ad3eb)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Python documentation states:
"When opening a file, it’s preferable to use open() instead of invoking
the file constructor directly." [1]
Further in Python 3 direct use of the file constructor is no longer
possible.
1. http://docs.python.org/library/functions.html#open
(Bitbake rev: 759f953e29a7131614e5b1f0312edf2b17523675)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With floating revisions and no specified branch, the fetcher could fail
with some obtuse errors. This was due to the branch name being set to None
which makes no sense. This patch reworks some conditions to avoid this.
(Bitbake rev: 740c58d43cfb1445dd126e4827bb70ce988ca107)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This function was used by old code such as packaged staging but is thankfully
obsolete now and replaced with better mechanisms. Its time to remove it and
the horrible internal only variables associated with it.
(Bitbake rev: 2995b8d551e0532eca20f8862730acd062c608ad)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was originally used to check the consistency of the stamps in one function
call. This turns out to be inefficient, unnecessary and if it were necessary,
check_stamp_task() could be called in a loop. The function has been unmodified
for a while and likely contains bugs. Its best simply removed.
(Bitbake rev: 728ffde1bd69b880d48fe8523b1616956d13616e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should fix issues where bitbake would seemingly lock up when checking
certain configurations of stampfiles.
The cache is kept within the runqueue since that feels like the right
place to associate this cache data.
(Bitbake rev: e95755c4931b26d9f8102ed3652dff969145cfc9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- for a normal exit, use WEXITSTATUS, rather than manually shifting
- for exit via signal, set the exit code to 128+N, per shell convention
- if a process was stopped, return and don't handle it, as the process can yet
be continued
This should fix the case where bitbake says a task failed with an exit code of
0 (we assumed failure based on the overall status, but didn't pass all the
information along to task_fail).
(Bitbake rev: 84ea614bc56d35a414eb5bf5658891b340bfc569)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
as ui design, add number of packages for each group, and make the
text font to 'bold' when row be selected
[YOCTO #2195]
(Bitbake rev: 5812176a679a39a4d096134c871c3d24a7e505ea)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When case about No browser, such as running in 'Build Appliance', user can't open
the hyper link, so add this work around for user. (Checking the browser is avaiable
or not is hard by different system and browser type)
[YOCTO #2340]
(Bitbake rev: 02cc701869bceb2d0e11fe3cf51fb0582cda01b0)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because the arrow icon refresh so fast as the go backward by illusion, so adjust it slow.
[YOCTO #2335]
(Bitbake rev: ac4a8885fafdc0d1e79831334ead9a8ddb6e2472)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We may meet certain command failure during build time, for example,
out of memory. In this case, we need to clear the "building" status.
This fixes [YOCTO #2371]
(Bitbake rev: 283dbbbf5d34adb4c9e3aa87e3925fdebe21ff42)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows some simplifications of the function and is slightly faster.
(Bitbake rev: 5999dc9985ad087c036611bfaa59b090a08781a6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds some basic unit testing for the codeparser and data store code. Many of
the actual test cases were taken from work by Chris Larson's OE-Signatures work but with
changes to adapt to the current bitbake APIs we need to test.
I also imported CoW tests written by Holger Freyther from the original bitbake-test
codebase: http://svn.berlios.de/wsvn/bitbake/trunk/bitbake-tests/tests/ and
some tests from the doctests that were removed in commit:
http://git.openembedded.org/bitbake/commit?id=3a11c2807972bbbddffde2fa67fc380d159da467
(Bitbake rev: ae4a95780e3e08cf73c854efa8cd93379e00c4e5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having two different version comparision algorithms in bitbake has never seemed
like a sensible idea. Worryingly, they also return different results to each other.
The vercmp_string API is relatively unused with no users in OE-Core or BitBake
itself for example. This patch converts it to use vercmp internalls, bringing
consitency to the comparisions which is easy now we have other recently added
functions. Yes, this changes behaviour but in this case I'd prefer we were
consistent than having two different comparisions.
(Bitbake rev: a569c816e016447d60624c59a750709d59a0f455)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: b766630ed7e099fffe817928a2811272677a1b26)
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't check for network access before grabbing the the current head,
cloning, or updating a clone when the protocol is 'file'.
(Bitbake rev: d5847bc5254b9d2f28a6b574f6157d1286add27c)
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In original scheme, sanity check is part of the parsing process. If a
sanity check fails, it means the parsing is failed and values in Hob
GUI may not correct.
With this commit, Hob will actively issue sanity_check() after the
parsing is completed.
This fixes [YOCTO #2361]
(Bitbake rev: 36968815dcc91759eeacb308bf4b294af416eee5)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If user changed the proxy setting, we will reparse configuration because
it may need sanity check.
(Bitbake rev: 0be54917cd88ea8f110027a7840ac69a411fd589)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To ensure the users configuration is sanity tested enable the sanity
checks after the GUI has started but before any parsing is done.
(Bitbake rev: 244ce2b900ae6cecbeeccfe2056e61c132476261)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are a number of DeprecationWarnings within BitBake code which
bitbake itself filters out; bitbake-layers was not doing this, resulting
in a stream of warnings printed out when used with Python < 2.7 (these
warnings default to disabled on version 2.7 and above.)
(Bitbake rev: 0a2378237f07eb1c812e2308e64b7d70781e2b39)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current description is empty. This adds a default
description for hob's dummy_image.
(Bitbake rev: 68a65e5eeeb01d78444f1e5b5d1bb7b21c9d0b2c)
Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If user stops a build, we need to firstly set the button insensitive and
then hide it. This ensures the button's init status is "insensitive" in
next build.
(Bitbake rev: ea37272ccc28d6e24b48286e5c4c3edbad1d57cd)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Originally the upper value for image size and extra size is 1024M, which
is relatively small. Enlarge it to 64GB.
Besides, fix tooltip for toolchain build.
(Bitbake rev: 99f01305b4c2253567a1a13a33339b1755a86e6d)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For config hash, we put the keys in structure of "set()", which is not
order sensitive. Therefore when calculating the md5 value for config
hash, we need to identify the order of the keys.
(Bitbake rev: 0f1b142a3f6b8125bf023c2e5ec269618869abf7)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In package selection page, treeview cell data callback function not cover the 'else' case, so parent item will render the pervious value.
(Bitbake rev: 98694c1dbc276cc151f393db67bfd43442da28ba)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'binb' popup window should be "set transient for" the main application
window which they were spawned from.
(Bitbake rev: a6f45b23851e22c7793d9a534fd197316bb5b9b8)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In those systems which had use gtk overlay-scrollbar feature,such as
Ubuntu 11.10, we have the issue with the multiple overlaped scrollbar in
'Recipe View' notebook or 'Package View' notebook, this patch is going to
fix it.
(Bitbake rev: f6be78d8a45dc501c2bbe1e1a399a342dabe11d5)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit fixes the contents in imagedetailsscreen, which lacks some
kind of image types, e.x., iso and hddimg.
(Bitbake rev: 4505097f4f7834857a6086d5dabeedb24b49cf4c)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create a wrapper with exception handling to call self.server.runCommand() safely.
Again, add exception handling to load_template() and save_template()
(Bitbake rev: cb07a027d3366ed30b0f7e5e85d08c6fda4eb5b9)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit merges some functionalities together and avoid unnecessary
signal handling. This can help to speed up the Hob startup.
(Bitbake rev: e5a6eb4f007bf270f2fddc814eb856da46e20eee)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If NoProvider event is received, we will handle it in runningbuild
module and send notification to Hob instance, avoiding stepping into the
final page with no image built out.
This fixes [YOCTO #2249]
(Bitbake rev: 067bc46a0fbc542fef1fcaa406ad3737a4c5a55a)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reset user recipe list and package list after the user changes the settings and
triggers recipe reparsing.
This is to continue to fix the bug [Yocto #2255]
[Yocto #2255]
(Bitbake rev: 95f4e9dc351f67442844ff52f90fc154fa95ba95)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is to remember layers and settings between Hob sessions, which
includes:
- Put some variables for the build details screen from Configuration to
Parameters because they are not actually for build but for show
- We create a dummy Configuration instance and a dummy Parameters instance
in __init__ of builder
- The two instances will be assigned the real values by
update_configuration_parameters() after parsing (in the event callback)
- When it is the first time to launch Hob in a build directory, nothing is
remembered since everything is fresh.
- The feature is implemented with templates, and based on the hook for Hob.
- When the user changes the layers or the settings, a default template file
is saved into ".hob/".
- Later on, the layers and the settings are remembered by loading the default
template automatically.
(Bitbake rev: f7c874ab930b9e7f95e79d0e84e62eb9b967f566)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Originally we use hardcoded "build" as the default task. This commit
fixes it by using BB_DEFAULT_TASK.
This fixes [YOCTO #2283]
(Bitbake rev: 7540f8d446345559ea9b47f4ff71d203ffdfaf8d)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If user selected a base image and didn't customize it, Hob will still
build the selected image instead of hob-image.
This fixes [YOCTO #2253]
(Bitbake rev: a74a6a033e66a0ae7b47c84d842bdd54066c69a1)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously we use the template file name as the image name. This commit
changes to use the original selected image into template file.
(Bitbake rev: 14a9da66fe08d181f45853c52e0c9f14773070a8)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the requried packages task-core-standalone-sdk-target(-dbg) for
building toolchain.
Fixed bug [YOCTO #2274]
(Bitbake rev: 434fdb3913cc78e2e9cdeede4c4fa7f1c8ef8892)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The version compare function vercmp() was not exatcly conforming to
Debian rules, e.g. it reported 'r1' > 'r1.1' but the Debian rules says
'r1' < 'r1.1'; it didn't support the "~" either.
Modified the vercmp() to meet Debian rules, so that it's compatible to
the rules used in opkg.
This part of the buf fixing of [YOCTO #2233].
(Bitbake rev: 97b610c54c60b5a40fa7f6a09fa23ce17b38f93a)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When Hob is busy with generating data, exiting Hob is not allowed.
That should be reasonable because at that time the mouse cursor is not a pointer.
If users want to exit, they can click "Stop" first and then do exit.
That is also a walkaround for [Yocto #2142]
(Bitbake rev: ad7f6bf3c7c4c15d546781aaefdaf03f00193f7c)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To make Hob's specific variable settings take effect, we add a Hob
config hook at the end of parsing for each configuration file, and in
the hook function, Hob will set its own variables to the data store.
This fixes:
[YOCTO #2210]
[YOCTO #2254]
(Bitbake rev: 0ec7d1bbfd2e09ae60f99e6134b20ffd1d9145b1)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To make the UI settings take effect, we need to hook at the end of each
config file parsing and set UI specific values.
(Bitbake rev: f54e733c7863110896f43900d9e4e791602f9d65)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch is to correct 7e5d41ab22
(Bitbake rev: b6e68019494044305ab28492a517d1eafea851c3) to fix the
missing functions.
[Yocto #2281]
(Bitbake rev: 3c2808b67384e92601cbd66877c36ca40df7c7ba)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is just a copy of the same method from the recipeselectionpage so
that we can actually run hob again.
Fixes [YOCTO #2281]
(Bitbake rev: b6e68019494044305ab28492a517d1eafea851c3)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also adjusted the cmdline ordering to work correctly
with both xterm and vte.
(Bitbake rev: 4219e2ea033232d95117211947b751bdb5efafd4)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding this simple version of a terminal selector for use
hob since it's needed. Moving forward in the 1.3 release
the existing code in meta/lib/oe/termnial.py will be migrated
to core bitbake code and this will use that code.
(Bitbake rev: 359a9ea4c8d61247064db3eaefb816ef116d332a)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because some variables not be updated when building started, so add them
to the updating function of configuration class, and add reset function of
configurate treeview of building detail page
[YOCTO #2244]
(Bitbake rev: 06ce753fd4680a204ccc63949ace637dc1c115e2)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't use "grayed out" but use "show/hide" for those appliable buttons
in the image details page.
[Yocto #2143]
(Bitbake rev: df1564d78d081ceab51d628d227e57b7a197259b)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch is to fix [Yocto #2255]. Now the logic is:
- If users change the machine, the image combo is empty for users to select.
- If users load the template, the image combo should set the value of
selected_image specified in the template.
- After loading a template, if users change the machine, the selected_image
specified in the template should be removed from the image combo because
it is probably invalid for a new machine.
- If users customize the recipe/package list, and change the settings which
causes reparsing, selected_recipes and selected_packages should be remembered.
- If users add more layers, selected_recipes and selected_packages should be
remembered.
(Bitbake rev: e549b11f4f31863393f62a253ee96bead4594523)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the steps in IMAGE_GENERATING, the patch consolidates them into
generate_image_async() to call.
(Bitbake rev: d4f2335e40d4d667847d3faed79bcee74baeea37)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the steps in PACKAGE_GENERATING, the patch consolidates them into
generate_packages_async() to call.
For the steps in FAST_IMAGE_GENERATING, the patch also consolidates them
into fast_generate_image_async() to call.
(Bitbake rev: 1ec53d41774528ab01e835d1cf4166f0202a7c38)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the steps in RCPPKGINFO_POPULATING, This patch consolidates them into
populate_recipe_package_info_async() to call.
(Bitbake rev: ed2aa6f235e1b789af8a33729302a4269674c6b4)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the steps in CONFIG_UPDATE, the patch consolidates them into
update_config_async() to call.
consequently remove CONFIG_UPDATE since MACHINE_SELECTION covers it.
(Bitbake rev: f583d43e87c049bdee88890e289f14520c7c31a1)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
initiate_new_build() (changed the function name into initiate_new_build_async()
to indicate it is an async function) or the similar sub-functions are called at
different places.
This patch is unify to call initiate_new_build_async().
(Bitbake rev: ec42be626a5d6362a09f12f4f4025ad92d70c89b)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As UI request, in recipes selection page, if user exclude a item,
the related depends recipes will be excluded together,so the view
clearly to add it.
[YOCTO #2100]
(Bitbake rev: c9eed04c6275ef2c694f89e047f85c7de76f89b6)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If zypper is selected, RPM packaging will add extra 50M free space to
the final image. We need to reflect it in package selection page.
(Bitbake rev: 22344f13d5e201be0d6381c6542d05c6fde7eec3)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes, users may open an image that is not built by Hob, therefore
its image name is not started with "hob-image-". This commit sets a
looser rule for runnable image matching.
This fixes [YOCTO #2240]
(Bitbake rev: 7b81389566cb27451557ca11ec8ed40ef2630543)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Once user did customization to his base image, we change the base image
to be "Create your own image" to avoid some issues caused by the
relationship between base image and its default recipes and packages.
This fixes [YOCTO #2211]
(Bitbake rev: 8edad8d282b69896237e956a00c66cd4d10ef494)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Requiring a double click to show the tooltips isn't very intuitive, add
a callback to show the persistent tooltips on button release.
(Bitbake rev: 80af7e72a9404044910fca7f9265e66354f747a6)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set the expand property on all columns other than the 'Included' column
so that the included column remains at the max size set.
(Bitbake rev: e1406d75c0643a2e65bb61649958e05e730fb332)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'Included' tab of the notebook should show the 'Group' a recipe
belongs to, per the design.
(Bitbake rev: 4f45d791644e383b11cbcfd4fb02866518cb9c04)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The design calls for a single 'Brought in by' item to be shown in the
tree views with any extra items to be shown in the tooltip.
(Bitbake rev: 6866271da738237d3a119e291ac8f9d2c517e124)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the previous two changes we now work on Gtk+ 2.18 and PyGtk 2.16
(Bitbake rev: 5ccbcdf8c47f2f20655a3ea0f60e5870cdba6f83)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gtk.Widget.get_sensitive() convenience method is only available
in Gtk+ 2.22 or later, instead use the sensitive property of the
gobject to determine whether the widget is sensitive or not.
(Bitbake rev: 82ea0619e9ecf9107b75692385bcf1434ea8a307)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
CentOS 6.x doesn't ship with new enough pygtk for this API.
(Bitbake rev: 2b6ce54cdc23c5fc1325e42634287134f55aacbf)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Assign a default value to the other one when either disk space interval
or amount of inodes interval value is set for example:
BB_DISKMON_WARNINTERVAL = "50M,"
or
BB_DISKMON_WARNINTERVAL = ",5K"
The diskspace monitor would not enable in the past, that seemed
unreasonable, assign a default value to the other one currently, so the
monitor will be enabled, and will warn both of diskspace and free
amount of inode if they have been set in BB_DISKMON_DIRS.
(Bitbake rev: 09592c119550550edcc59c871f754536d5b7bf65)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: dd15a92a0932d3e177c0ca7b2923da1d72046e51)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
params["pmake"] should be in the format "-j int".
When loading/saving "PARALLEL_MAKE" into templates, configuration.pmake will be
converted into "-j int", as "PACKAGE_CLASSES" and "BBLAYERS" do.
For "PACKAGE_CLASSES" and "BBLAYERS", params["pclass"] and params["layer"] are
also strings rather than the types of configuration.curr_package_format and
configuration.layers.
(Bitbake rev: d49db15badb77855cef855ee73430fcbc16b6916)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
image_fstypes in the configuration has been changed into a string rather than
a list. Here we correct it in __init__() of class Configuration. At other places,
image_fstypes are all strings.
(Bitbake rev: 59dd7e91c11e0348f967578f32e13f5984c6a452)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoid the empty white space appearing on top of the machine selection combo
box and the image selection combo box in the "Image configuration" screen
[Yocto #2166]
(Bitbake rev: 9d30ad56803c67d2dc7ebddd7c339038438f02ba)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We call intsize_to_string (and string_to_intsize) in 3 different places.
We unify the implementations into one place.
(Bitbake rev: 578ce86a9ac2110f5b128aae582c6e0b3e739cec)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Handle exceptions during type conversion to integers.
(Bitbake rev: bb3a4e2d40486a347c13563d73e4df6d015a3c6c)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Handle exceptions during type conversion into integers.
(Bitbake rev: e03da8876045af545303db2b8044a17657337140)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We also need to check if the selected image is "Create your own image"
and set it as active.
Besides, to avoid the impact of set_active(), we need to move the
connect signal in the end of the update_image_combo() function.
(Bitbake rev: 54ae7ddac450b4717e5ccae3bfe9acb479449451)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We will not display multilib recipes and tasks in separate tabs,
therefore remove the specific types.
(Bitbake rev: da69e665196714b0f2039c11f9f232db7b58bce3)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hob uses API from pygtk 2.22, therefore check to see whether this
version is available and exit cleanly if not.
(Bitbake rev: 192d5fdf9ea27cdc8b043204857ae5b21173a011)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the deploy button is disabled since there is no deployable image,
the console will show the warning message:
WARNING: /home/yocto-build5/poky-contrib/bitbake/lib/bb/ui/crumbs/imagedetailspage.py:333:
GtkWarning: /build/buildd/gtk+2.0-2.22.0/gtk/gtkwidget.c:5684: widget not within a GtkWindow
self.deploy_button.grab_default()
This patch is to remove the warning message.
(Bitbake rev: 51a9a5557bb798b559874a4e6dc9924380b5d9a4)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously we reused the info display file which is for indication of tooltips.
But it is too small, when it is shown on the dialog as the dialog indication icon,
it becomes unclear after being stretched out. So, we replace it with a larger
icon.
(Bitbake rev: 87282847f1ba56420b0c6dbf04bea6e518962398)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If save every selected package into IMAGE_INSTALL field, and then build
the saved bb file by bitbake command line, it will report errors since
some packages could not be found since they are dynamically generated.
With this commit, Hob will only save those packages into the
IMAGE_INSTALL variable which are brought in by user.
(Bitbake rev: 6c970d07422bb9a8fcf339315587cfc9b207a44e)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Originally we added -dev and -dbg postfixes to our selected packages as
toolchain packages. However, some package names are modified in recipes,
so we could not rely on its base name. The new approach is to detect if
a package is selected, then include those packages under the same recipe
endswith "-dev" and "-dbg".
This fixes [YOCTO #2185]
(Bitbake rev: f99c66071bce63780301e1639d74316503ca934c)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes, certain variables have duplicated values inside, for example,
IMAGE_FSTYPES = "tar.bz2 ext3 tar.bz2 ext3"
We need to remove the redundancy for those values.
(Bitbake rev: 98849cf9201239b23bbbe9247db4d6901f0ed905)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
initiate_new_build() function is in async mode and could not be called
before another async function.
Also we could not initialize the build if user simply change a setting,
therefore remove this function.
(Bitbake rev: c184cefe90115623e2312ad2bbe34ea95788c129)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If values in advanced is changed, we also need to reparse the cache to
get the latest value.
(Bitbake rev: 7b2f6744201511060f26cd2761e9556efec4b9a2)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Define the empty curr_mach to be "" instead of None.
Fix the judgement for ' if self.curr_mach == "" ' to be
' if self.curr_mach '.
Also set machine to bitbake server when "MACHINE" is not empty.
(Bitbake rev: 662fa1b126d5b9b3a80193205c22b2fe29305185)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the issue about the building log scrollbar can not auto scroll to page end sometimes
[YOCTO #2098]
(Bitbake rev: 035e146ff92236a3eda71ad71e8389737f91753b)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When "Force stop" is performed during the build stage, after os.kill() kills the build sub-processes, there are many <defunct> python processes in the system. In Hob, when the user initiates a new build, os.waitpid() in runqueue_process_waitpid() will be called, and the pids of those <defunct> processes will be returned as result[0], then self.build_pids[result[0]] will throw KeyError exception because now for the new build self.build_pids is empty.
This patch is to address the above issue to collect the results and handle the sub-processes as soon as they are killed.
[Yocto #2186]
(Bitbake rev: e9f4ca467e795bbc520d12b0e7a5985b6ff0a20e)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sort in ascending order on the recipe name (A-Z) and unset the default sort
function so that there's no third (unsorted) state.
(Bitbake rev: c6ab6c7caf16c04e2a0c0f2aefd3377f781206c7)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Switch to proportional font sizes and tweak padding and layout based on
feedback from design team.
(Bitbake rev: 356f190bb3f0ee9a15df900714edcb85593d6989)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For make icongraphy consistently to change the original gtk-icon to hob-icon
[YOCTO #2108]
(Bitbake rev: 8c3401bc11c6f3708b8ee9c0175f389399fdff5a)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The error source picture is not right, so fixed it and adjusted its size.
[YOCTO #2097]
(Bitbake rev: ce680f10037b42831179a4598a69fb39688fb238)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The change includes:
- remove the colors which are not used
- change the background of indicators to deep red
- change the color style of the texts on HobTabBar, i.e., the tab text and the indicator background are gray when the tab is the current tab; the tab text is white and the indicator background is deep red when the tab is not the current tab.
(Bitbake rev: 95acecbf50cee906dca4abd5ce758701e5761668)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes even setting are not changed, the hash values differs due to
variable order issue. This commit fixes the issue.
(Bitbake rev: 1fe0996f89952af72cbdc46ca7c6495868d27a56)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use string format to store image_fstype instead of a list.
(Bitbake rev: c91fe7f9d21939fd437dbd79a923499f90fc95c6)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When config reparse is issued (e.x, adding a layer), we will firstly
remember the past user settings by setting them to bitbake server,
and then do the reparse.
(Bitbake rev: 8a1f6953a082d8002585bfd9e8a67d2a7f69d6aa)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to update the parameters stored in Hob side after
configuration is parsed.
(Bitbake rev: 9560e4ccef497e878f2cb8624136ab8f193c061a)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After a successful build, user can initiate a new build by clicking
"Build a new image" button. The previous solution is simply switch to
the first screen and unset MACHINE. This commit will try to re-init
everything for the new build.
(Bitbake rev: df63e15c41d129fe0cff6b8ab3c97434c4809c83)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The parameters in triggerEvent function is an event object, and it may
cost some time to pass this object through pipe, causing the pipe's
poll() function timeout. Change it to async mode.
(Bitbake rev: 3b5909ebc86a12dedfb30e5446aa81eb58921760)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While adding meta-hob layer, we need to detect whether it already
exists in current layers.
(Bitbake rev: b195823d19bcb71bd5eef19acfe22b2dd670d90a)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because we sort the treeview to list specific layers at the top, and
therefore implicitly change the sorting of the underlying model, we can't
be certain that the original layer list will equal the new layer list
despite the included layers being the same.
To ensure we can do a simple equality test to determine whether the layers
have been modified first sort the lists to ensure we're comparing based on
contents alone.
(Bitbake rev: ae86cd8b4ef1e43b79230326ccba69e2900d074f)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user explicitly stops the build telling them the build failed is a
misnomer.
(Bitbake rev: 722f4f0e31f9debf5ad20a91da759a8c25151567)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because layer changes may take some time allow the user to cancel out of
the dialogue and prevent Hob from applying any of the changes made.
(Bitbake rev: a2d1c035a5dd3d112a887e4386dfaf9b0c37c104)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add space between the target machine combo and the 'Layers' button.
(Bitbake rev: bdd50d92e90f96bf7ff433bb539cdde4b0d21cdb)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add more padding between the icon and the text
(Bitbake rev: a81f6a33cf1fa9fe869ac617f2d14d66e07009ff)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is to change some words of variables to make them consistent with the GUI.
(Bitbake rev: 4af7ab24ff3b170dfa74159c057e7110a615a8d3)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is to add Templates and Settings tool buttons on the image
details screen, which makes things easier and simplier.
In order to fulfill that, the code splits the functions
show_load_template_dialog() and show_adv_settings_dialog() in builder.py
because they will possibly be called from different screens later.
[Yocto #2163]
(Bitbake rev: 29bea7b7076a7b74d36237da86a4eff6605d17ec)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With this patch, even though there are a lot of images built out, a default image
which is either deployable or runnable is toggled by default. So, for users, one
more action to select an image before running qemu or deploying is not needed any more.
Note: If there are more than one runnable or deployable images (such as ext2, ext3,
jffs2 and btrfs), only the first image is toggled by default for run-qemu or
deployment. If the user wants to run or deploy others, he/she needs to toggle them
manually.
[Yocto #2155]
(Bitbake rev: 4568dfbd5e693cce0e6e947f323eaf08a3176744)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On terminals which support it, add summary information to the end of the
build output about the number of tasks currently running and how many tasks
we've run so far.
This provides a summary at a glace of what the current state of the build is
and what the build is currently doing which is lacking in the current UI.
Also disable echo of characters on stdin since this corrupts the disable,
particularly Crtl+C.
The "waiting for X tasks" code can be merged into this code too since
that is only useful on interactive terminals and this improves the
readability of that output too.
Improvements since v0:
* The tasks are ordered in execution order.
* The display is only updated when the list of tasks changes or there
is output above the footer.
* Running task x oy y and package messages are supressed from the console
This UI can be accessed with "bitbake -u knotty2".
(From Poky rev: e38b4569648f2916c4370871c79e6a6090eb8bc1)
(Bitbake rev: 156189c799d2bb1f69bdaa04b5cd718fe7881425)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using symlinks to absolute paths isn't gaining us anything, and can cause
problems in situations such as automated build systems when they try to
resolve the link, depending on the mechanism used to pull the build artifacts
(e.g. nfs).
(Bitbake rev: f9cf2671c0ecad153db11bca1aebe151213bfb42)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is to read the proxy variables such as all_proxy, http_proxy, https_proxy, ftp_proxy, GIT_PROXY_HOST, GIT_PROXY_PORT, CVS_PROXY_HOST, and CVS_PROXY_PORT from the bitbake server, show them on the Settings dialog for users to change and set proxies for the build.
(From Poky rev: bbef66e4005def54d70d3720ec131fa7edc22e2a)
(Bitbake rev: 66c63167cd139706100bfa35eb4ca66c98407615)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The runningbuild.py has been shared by different applications, not only hob, so fixed the some not compatibled codes
(From Poky rev: 99fa7388500fa97fe4629456daa50bb5637e51e6)
(Bitbake rev: 23c13560fa76442c798058700863bd91491ca826)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make the building log config information to get from the bitbake parameters directly, and then cancel the old way of filting the building log on running
[YOCTO #2144]
(From Poky rev: b52025a0fe2ca65e4d8549b1b90f5813b0c2e39f)
(Bitbake rev: 983f8848da0be02dadb1bb6530ff736325d014ba)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because we have hob icon, so need to make some gtk icon to transfer to hob icon. so use hob icon checker to fixed the gtk icon
[YOCTO #2108]
(From Poky rev: d1d84e5529e0d0752fdcd8d3458ed7595d373115)
(Bitbake rev: 65bbc07a3557ac760c6b900880ea6ae2937afde3)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fixed the bug of 'error' and 'warning' icon is not constaintly with hob ui design
[YOCTO #2097]
(From Poky rev: 5b4f379b5341222e2678043f078b3d33c0556a86)
(Bitbake rev: 3807a95cd48a01486b3ecd5360a59ddfc3a3b6d6)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
add a refresh icon to indicator the running task, for avoid add more heavy to bitbake building process, increased the timer interval counter, and decreased the refresh icon render size.
(From Poky rev: cf76d2cef0905a442e61769560173b2e6a58fb62)
(Bitbake rev: d5923a484f80bc1577f78035152c2d0728e4a1f3)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use HobAltButton, rather than gtk.LinkButton, for the 'View files'
button.
Use xdg-open to display the folders contents.
(From Poky rev: 22955b47ac485e0d069ddd8301a11658d76bcfee)
(Bitbake rev: 9647c188c0d06ec045c15281eae785e935c25d2b)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tweak the table layout and insert some dummy widgets when the buttons
aren't drawn such that when the buttons do get drawn the existing widgets
don't all jump up.
(From Poky rev: 9edd833e7e36aea6a7350a36a5aad0ef300959c4)
(Bitbake rev: c09f71414d459eb926aa567d90a63407407d173e)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use two lines to display the active task and recipe, per visual design.
(From Poky rev: ea61503fc439e033b341bb7a50bac77c5e88834e)
(Bitbake rev: ab508907308e8b1bc1b097df1f583dffd7ef25af)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The design calls for primary buttons which are orange and large and
secondary buttons which are subtle with pale blue text. This is so that the
user is drawn towards the primary action and their use of the application
is more guided.
This patch uses HobButton and HobAltButton classes to style all dialogue
buttons accordingly.
Fixes [YOCTO #2125]
(From Poky rev: 1a52fe9f9e79f33686bd92613fc93eb97daacab8)
(Bitbake rev: 723ad434d427398b202b70f27762878315ffb22c)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is to add build status (incl. "Running task XX of XX: XXXXXX") in the build details screen,
in order to provide clear information about task in progress and make the GUI close to the visual design.
[Yocto #2098]
(Bitbake rev: 02d3451b2e0744204a1280f9effe9fd862bb4faf)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The persistent tooltip looks a little weird when it's too small, request
that the toolkit and WM give it a reasonable minimum size.
(Bitbake rev: 637ea3671dda9c5a1065f992fd9ee87d63043cf4)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The design documents have the close button vertically aligned with the
tooltip contents - reorganise the interal widget layout to achieve this.
(Bitbake rev: 4f8c36226867291c7b6c413ee2570d61a326ec47)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The design calls for all buttons to match the style of either the HobButton
or HobAltButton classes, therefore implement the styling logic as static
methods of the implementing classes so that we can more easily set styles
for the buttons created by a gtk.Dialog (or subclass) without having to
modify too much of the dialog instantiation code.
(Bitbake rev: ccb8f5cd52ee7833129583b9201c65d93cb87d56)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The buttons taking the user back to image configuration should be prefixed
with '<<'.
(Bitbake rev: e0d598b454c01303a0ea9503feef3ce6f1ed1d69)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use an alternative, grey, colour when the button is insensitive so that
the insensitivity is easily noticed.
(Bitbake rev: 53af6a962aa2f6b4d68d59792be9c7f33cf887b4)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The two layers which cannot be removed, meta and meta-hob, should be the
first two items in the tree view.
(Bitbake rev: 6e51643325611f6cfc9090dcbbff20755d09c92d)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Correct some apparent misspellings of BB_NUMBER_THREADS.
(Bitbake rev: 175e55db8f0762a2f2f0aaf3ca48169016b9ef6b)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should get TMPDIR from bitbake server instead of hardcode.
(Bitbake rev: 91bdd43468448385e07a57ac54ce25db9a8edf03)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In Hob advanced setting, if "defaultsetup" is selected, we need to
leave DISTRO variable not set in bitbake server.
Otherwise, defaultsetup.conf will be parsed twice, causing TMPDIR and
its related variables mess up.
(Bitbake rev: 863b14ebf2c7443ce6df362f24af6395e520edbc)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implement the filter for runqemu and deployment functionality.
runqemu
1) suffix should be in the list of RUNNABLE_IMAGE_TYPES.
2) machine should match the pattern of RUNNABLE_MACHINE_PATTERNS.
deployment:
1) suffix should be in the list of DEPLOYMENT_IMAGE_TYPES.
(Bitbake rev: de4d09a8d100b81622300db5f46627c649812abd)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change allows adding extra inherits before getting all the
parameters.
(Bitbake rev: eb993c0bad03718f9d3e133667cd0fefca23611a)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When creating label in recipeselectionpage.py, the builder's
configuration may not be ready yet, so create an empty label in
initialization.
(Bitbake rev: e4f22f6242f489afcadac67cc8dd282936b78586)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ASYNC commands can automatically detect if BB file parsing is needed.
Therefore remove this explicit parsing command.
(Bitbake rev: 73692cb55d7d5aaedfbcf6b8a24ab435a1d25a9e)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change the text of view_recipe_button to 'Add/remove recipes and tasks'
Change the text of view_packages_button to 'Add/remove previously built packages'
[Yocto #2146]
(Bitbake rev: 0348ef08db9ac425d83126d2e6eb465adc28b110)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For make the building screen to provide clear information about task in progress by request, so add this function.
At the beginning of building, the vertical scroll bar will go to the active area automatically.
Once the user moves the scroll bar in the middle, the automatic move of the bar is disabled.
However, once the user moves it to the bottom again, it will be kept to the bottom even though more logs come.
[Yocto #2098]
(Bitbake rev: cf43be6685d45c66e6508bbce653f8a67db66a9b)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is not to show the horizontal scroll bar for building log, and add CellRendererText class to wrap the text.
[Yocto #2091]
(Bitbake rev: 7c5e1297c1af2edd46315e3dec4516f850d5e222)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace all gtk.Button instances that have the orange style applied with
HobButton.
(Bitbake rev: f4dfdc23a6498fdaa164a1bfccf616ff8fcbd251)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The design uses a big, bold labelled, orange button for the primary action
on each dialogue. The HobButton implements this design as a reusable widget.
HobButton makes use of Pango Markup to use a relative size, x-large, for
the button text to ensure it's relative to the system configured font
sizes.
(Bitbake rev: 9aa477f7bd16d3e360bf9b51c1f9d5032a6c5288)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joshua Lock
Liming An
Enrico Scholz
Richard Purdie
Christopher Larson
Dongxiao Xu
Jeff Polk
Paul Eggleton
Beth Flanagan
Shane Wang
Lianhao Lu
Saul Wold
Robert Yang
Robert P. J. Day