Add 3.19 kernel support and remove 3.10 and 3.17 support.
'Fixes' [YOCTO #7391].
(From meta-yocto rev: fe9b3c567230e815f528431f1098626669a9568f)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a license file matched more than one of the specifications (e.g.
COPYING.GPL) then it was being added to LIC_FILES_CHKSUM more than once.
(From OE-Core rev: 58316a2890782d206e9b9472ba483367f7560109)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a dry-run option to the deploy-target and undeploy-target
subcommands so you can see the list of files to be deployed or
un-deployed before actually carrying out the operation.
(From OE-Core rev: b9625581f3fe72fc402632be2d87cf889301c6a2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The -q option to scp does stop the progress being shown, which is mostly
superfluous, however it also stops errors from ssh being shown - if
there's a problem, you'll just get "lost connection" which really isn't
that helpful. As a compromise, add a -s/--show-status option and
advertise this when the command fails.
(From OE-Core rev: 5cbb026212b4c8f5206a07d70b94f57edeee0839)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you haven't built the recipe yet or if the output directory (${D}) is
empty, then we should tell the user rather than have scp error out.
(From OE-Core rev: 3fd9ac277393bef5c646f16b9d8f30c277881d70)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you're testing with multiple images/devices that have the same IP
address / hostname then it can be annoying to deal with host key
mismatches all of the time. As a MITM attack is unlikely in the local
test environment, provide a command line option to pass the appropriate
options to scp/ssh to disable the host key checking.
Note: if you wish to apply this permanently, the best way is to do it
through your ssh configuration e.g. by adding the following to your
~/.ssh/config:
Host 192.168.7.2
UserKnownHostsFile=/dev/null
StrictHostKeyChecking no
(From OE-Core rev: 81dd1319112a99bc38b7a7ced0663918ac5b09a4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Consolidate code for checking compatible recipes and consider meta and
packagegroup recipes as well as package-index and gcc-source to be
incompatible.
(From OE-Core rev: 4be9bf637583b341a89af1b9924752abc7d49c94)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you point devtool modify to a source tree previously created by
devtool modify or devtool extract, then we need to try to pick up the
correct initial revision so that devtool update-recipe knows where to
start looking for commits that match up with patches in the recipe.
(From OE-Core rev: c20e10543e268ebb43074a3f8d6e7ed991e54ec8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a -a/--all option to allow you to quickly reset all recipes in your
workspace.
(From OE-Core rev: 0c83788b111a761f6f500b86780cc51aed255402)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No functional changes, just use a unique name for each parser.
(From OE-Core rev: 5fabc59d6221c3fe7137b70e31ec2761a4276a6c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Pass correct arguments to undeploy() function
* If an error occurs during undeploy(), exit instead of continuing
(From OE-Core rev: c938dee4b28af7e6296c86347dfa533f85605033)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used default values of PSEUDO_* environment variables only
if variables are not set.
This allows to set custom PSEUDO_PREFIX and other pseudo
variables in order to use pseudo database from non-standard
locations.
Change-Id: I0bc1af5e521121d1f96d590cb6edb23cf0cb0b83
(From OE-Core rev: cd121c06e9de8951d507998be443f95f0edc246a)
Signed-off-by: Ed Bartosh <eduard.bartosh@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for skipping the beginning of a file with the rawcopy
plugin.
(From OE-Core rev: 89db37c85ac0d0035dbeb9643d7802ca28681e76)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The fsimage plugin allows to add an already existing filesystem image in
the partition layout.
(From OE-Core rev: b49e5af8c6ef0abaabce36e5e7d8ddc399e02f53)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 0a6668f6e60b4195ff4163c00fc972bacdb27b4b still included some
debug and is not working properly as the new fstab is generated too
late.
(From OE-Core rev: eea80d25c0902bb16ed3425888857d3cc5486376)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because we move the workdir when extracting source, then move the source
and delete the temporary workdir, you lose the indirection symlink
pointed to by the alternates file (which is created when the fetcher
clones it from DL_DIR with -s) and the resulting repository is broken.
In any case, for a source repo that the user may put their own changes
into, we can't really rely on a clone made with -s in case the
original goes away - because of cleanall, DL_DIR disappearing, etc. So
repack the repository so that it is a complete, non-shared clone after
unpacking.
(While I'm at it, add a test for devtool modify with a git recipe which
verifies that this works.)
(From OE-Core rev: dccdde4321c48a571677995a4e1dfc583e899cbe)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable source extraction used by devtool extract / devtool modify -x for
recipes that use a shared workdir (e.g. the kernel and gcc).
(From OE-Core rev: 73a5bdc7921791b954ca717293e76c7e3091a19e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If S is outside of WORKDIR then we shouldn't try to get the relative
path in order to work out where the source subdirectory is as we do by
default.
(From OE-Core rev: 7392ecd559ef71241405c704a65da171ee216ca1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There wouldn't be any point to using these with an image recipe, so
disallow it.
(From OE-Core rev: 611c27182a6e52e159a1ce1b5bac054405c611d2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When updating git-based recipes, in a lot of cases what you want is to
push the changes to the repository and update SRCREV rather than to
apply patches within the recipe. Updating SRCREV is now the default
behaviour for recipes that fetch from git, but this can be overridden
in both directions using a new -m/--mode option.
(From OE-Core rev: 654792bb87610ee3569d02a85fa9ec071bf8ab6d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you want to be able to make use of libraries in conjunction with
devtool then we need to install them into the sysroot for other recipes
to use. Make it a configuration option in case it needs to be changed at
runtime.
(From OE-Core rev: 94f517ad8e55edfbe6f06afd963bcfeb849626ff)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you've added a new recipe, you want the output cleaned when you do
devtool reset, otherwise cruft from building the recipe may remain which
could interfere with future builds.
(From OE-Core rev: 664d1a7fe8f8288fabc582d00f6e36ab29496ec5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default behaviour is to build in a separate directory to the source,
however some projects can't be built this way, so add an option to do
that (or override the automatic behaviour in the case of modify).
(From OE-Core rev: cf094ed2f616a581eb07d78db4366c83a441fde5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Option was renamed in the setup code but not in the code that used it.
(From OE-Core rev: 4b4f2d4f2869d6d5d564cc1b2d733f41ab5a3b9b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the recent kernel staging changes, STAGING_KERNEL_DIR no longer
points to the kernel image, which can be found however in
DEPLOY_DIR_IMAGE. This updates find_artifacts() to look there
instead.
Fixes [YOCTO #7307].
(From OE-Core rev: 453d0a9823665870e273a37657d6e27fb788d72e)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the partition label option, when available, to label the filesystem.
(From OE-Core rev: 93e2de4f4b71775d70ac2ccb7e2d26ca95b96186)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
btrfs emtpy partition creation is currently not working because of the
usage of the non existant variables rootfs ans extra_imagecmd. It also
as an incorrect size.
(From OE-Core rev: 2624f30dd2d2a8f7fd97117c77a4d6aa2ba6f1f9)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
__write_fstab() is already iterating over parts. There is now need to
call it fort each parts.
(From OE-Core rev: 0a6668f6e60b4195ff4163c00fc972bacdb27b4b)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Introduce a new option --overhead-factor to replace
IMAGE_OVERHEAD_FACTOR.
(From OE-Core rev: 20fe0c7202724187dbe80eb2101d8ef69e86b94e)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Introduce a new option --extra-space instead of using IMAGE_EXTRA_SPACE.
This is useful for boot partitions where the extra space is often
useless or for huge partition where 10MiB may not be enough.
(From OE-Core rev: 9f7fe71a10bcdd1864d2f838f3510e96810ef42e)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For some architectures it is necessary to reserve space on disk without
it being present in the partition table.
For example, u-boot on i.mx is placed at an offset of 1kB on the sdcard.
While it would be possible to create a partition at that offset and
place u-boot there, it would then be necessary to update the default
u-boot environment to use partition 2 on the mmc instead of partition 1.
(From OE-Core rev: 233b631ece5ee14d057932c146327065064b5196)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Based on feedback from Scott Rifenbark <scott.m.rifenbark@intel.com>
(From OE-Core rev: 2c59b2b20c32577085645056e4cbf4f9c259e4d7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Based on feedback from Scott Rifenbark <scott.m.rifenbark@intel.com>
(From OE-Core rev: ec3378f3a7013e289daa0f5c52329488b861f99c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stop removing the whole working directory as this is also removing
eventual previously created partition images, leading to image creation
failures.
(From OE-Core rev: 2d3c9f89852bd009fc7accee495ede2fbcadc3bb)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When printing a partition, the --align parameter was shown when present
but not its value.
(From OE-Core rev: 26280cf0199abb3266d620c8dee1194504a5a829)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use kB instead of MB for the partition size to get a better granularity.
This is needed on some SoC (i.mx, omap) where it is necessary to create
partitions as small as 64kB.
Keep the backward compatibility by assuming MB when no unit is provided.
(From OE-Core rev: 3d4da9186016d54b76ad2fa710646de253f0f063)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Tested-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kickstart file errors are not emitted by the parser. In case errors, the
current code will continue to execute possibly creating a faulty or
incomplete image. The patch enables the parser to emit all encountered
errors. The error message is shown for the user and further execution is
ceased.
(From OE-Core rev: 0aa1221c16e65b3daac4aa9a9cfe1d5e9e6106c0)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch fixes an issue in laying out extended and logical partitions
by wic. The original code produced disk images in which the size 3rd
partition as described in MBR was incorrect. Depending on the type of
file system used for that partition and size of the partition, it would
be impossible to mount the partition correctly. For instance, kickstart
file in which the 3rd partition had size of 1GB and used ext4 fs, would
result in an image with an umountable partition. The root cause is
reservation of sectors for EBR through stealing of last sector from the
last primary partition.
(From OE-Core rev: a8b85f7878726503dbfa2e9ea86bd6fd961bf03b)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without 'branch' in the SRC_URI, a SRCREV specified for a non-master
KBRANCH will result in a fetch failure since the branch tested by the
fetcher will default to master, which doesn't contain the SRCREV.
This fixes the problem by adding branch=KBRANCH to the SRC_URI.
Fixes [Yocto #6518].
(From meta-yocto rev: 29a36d4c1146f38b4d204b5b4b89bd002074d47d)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The /conf dir for arm was missed when committing the changes for the
'removing strange characters' patchset; this restores it.
(From meta-yocto rev: 0fe51b37c32569bd5a3e24c43dc4d16ab7b6d4e9)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a versioned recipe filename is specified, replace the version in the
value of S with ${PV} just as we do with SRC_URI to make future upgrades
of the recipe easier.
(From OE-Core rev: 0b3c81ed5bcce9b608c4f804496d769288fe8c04)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This uses a standalone python script named `pythondeps` which now lives in
scripts. It supports scanning for provided packages and imported
modules/packages, the latter via the python ast. It's not perfect, and
obviously conditional imports and try/except import blocks are handled
naively, listing all the imports even if they aren't all used at once, but it
gives the user a solid starting point for the recipe.
Currently `python_dir` from setup.py isn't being handled in an ideal way. This
is easily seen when testing the python-async package. There, the root of the
project is the async package, so the root has __init__.py and friends, and the
python provides scanning currently just assumes the basedir of that dir is the
package name in this case, which is not correct. Forthcoming patches will
resolve this.
(From OE-Core rev: cb093aca3b78f130dc7da820a8710342a12d1231)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
MMC block device partitions are named differently than other block
devices and use the scheme: mmcblk<devnum>p<partnum>, ex: mmcblk0p1,
mmcblk0p2. The current code generates incorrect parition names missing
'p' infix for fstab entries. The patch resolves this problem.
(From OE-Core rev: e2664f563921467fe38bb74f4dd2a41eb004ee9f)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Deploy recipe output files to live target machine using scp
Store the files list and target machine info in localhost if deployment
is done
Undeploy recipe output files in target machine using the previous
deployment info
[YOCTO #6654]
(From OE-Core rev: cc10751aa3121218b21ec2058358f3ea02a4500a)
Signed-off-by: Junchun Guan <junchunx.guan@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provides an easy means to work on developing applications and system
components with the build system.
For example to "modify" the source for an existing recipe:
$ devtool modify -x pango /home/projects/pango
Parsing recipes..done.
NOTE: Fetching pango...
NOTE: Unpacking...
NOTE: Patching...
NOTE: Source tree extracted to /home/projects/pango
NOTE: Recipe pango now set up to build from /home/paul/projects/pango
The pango source is now extracted to /home/paul/projects/pango, managed
in git, with each patch as a commit, and a bbappend is created in the
workspace layer to use the source in /home/paul/projects/pango when
building.
Additionally, you can add a new piece of software:
$ devtool add pv /home/projects/pv
NOTE: Recipe /path/to/workspace/recipes/pv/pv.bb has been
automatically created; further editing may be required to make it
fully functional
The latter uses recipetool to create a skeleton recipe and again sets up
a bbappend to use the source in /home/projects/pv when building.
Having done a "devtool modify", can also write any changes to the
external git repository back as patches next to the recipe:
$ devtool update-recipe mdadm
Parsing recipes..done.
NOTE: Removing patch mdadm-3.2.2_fix_for_x32.patch
NOTE: Removing patch gcc-4.9.patch
NOTE: Updating recipe mdadm_3.3.1.bb
[YOCTO #6561]
[YOCTO #6653]
[YOCTO #6656]
(From OE-Core rev: 716d9b1f304a12bab61b15e3ce526977c055f074)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a utility module for scripts. This is intended to provide functions
only really useful before bitbake has been found (or only of particular
interest to scripts). At the moment this includes functions for setting
up a logger and for loading plugins.
(From OE-Core rev: a8f90528981127fbace3e901c6e3dfe8b45b98ab)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a more maintainable and flexible script for creating at least the
skeleton of a recipe based on an examination of the source tree.
Commands can be added and the creation process can be extended through
plugins.
[YOCTO #6406]
(From OE-Core rev: fa07ada1cd0750f9aa6bcc31f8236205edf6b4ed)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi
Paul Eggleton
Ed Bartosh
Alexandre Belloni
Maciej Borzecki
Christopher Larson
Junchun Guan