Improvements:
- On startup keep interfaces already configured
with static IPv4 addresses if there is a
service configuration file containing
the very same static values. If not,
take the interface down and flush
the old configuration as before (Jukka Rissanen).
- Handle FallbackNameservers properly;
use them when no other nameservers have been
configured for a service (Patrik Flykt).
(From OE-Core rev: 2d0840780525e9a911e567f45b764850419d49f3)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ldd sysroots/x86_64-linux/usr/bin/gdk-pixbuf-query-loaders.real
<snip>
libz.so.1 => /sysroots/x86_64-linux/usr/bin/../../usr/lib/libz.so.1 (0x00007fab55393000)
If zlib-native has not been unpacked, host libz is used which can fail.
(From OE-Core rev: 8422c759ae674856aaaee176eab5a395a620443c)
Signed-off-by: Konrad Scherer <Konrad.Scherer@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This seems to be an obsolete check - we don't have any problems with
image creation under selinux, so remove it.
(From OE-Core rev: 12e81eceab9e0a483765566ad3791b14718195b5)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In some cases, it's unfit to use "+=" in a conditional appending, we would
end up with the variable being set rather than being appended, which is not
it mean to.
(From OE-Core rev: 7eae843aaa4eaa534a2b825949563ca11bd3680c)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using the tar executable in the buildtools, tar will execute
gzip. If this happens before zlib-native is built, then the gzip
on the host will be used and can fail if the libz in the buildtools
is not compatible. Adding pigz to the build tools avoids this host
contamination.
(From OE-Core rev: af6424e8c2bf3a938fddabc669c0956d68964ed0)
Signed-off-by: Konrad Scherer <Konrad.Scherer@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While ELF_C_RDWR_MMAP was used, elf_begin invoked mmap() to map file
into memory. While the file's bss Offset has a large number, elf_update
caculated file size by __elf64_updatenull_wrlock and the size was
enlarged.
In this situation, elf_update invoked ftruncate to enlarge the file,
and memory size (elf->maximum_size) also was incorrectly updated.
There was segment fault in elf_end which invoked munmap with the
length is the enlarged file size, not the mmap's length.
Before the above operations, invoke elf_begin/elf_update/elf_end
with ELF_C_RDWR and ELF_F_LAYOUT set to enlarge the above file, it
could make sure the file is safe for the following elf operations.
[YOCTO #5356]
https://bugzilla.redhat.com/show_bug.cgi?id=1019707https://bugzilla.redhat.com/show_bug.cgi?id=1020842
(From OE-Core rev: 35c8b1ac7c3b1e4209b1e30d1dbd1a457286b97b)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Wayland support depends on wayland-egl, which is provided by mesa.
(From OE-Core rev: a1a379b3c9728a06b086b4c1f06f663f54d7d37d)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In a recent commit, the FILES expression for rpm accidently moved a
large portion of rpm-build into rpm:
http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=2e557556e03f4e86795cf331ccf06acd4c373045
Since rpm-build requires perl, this caused a number of build failures
when the rpm-build package was attempted to be used since it references
/usr/bin/perl. This commit restores the previous contents of the rpm
package.
(From OE-Core rev: a72ca9b8068f71cfed8b7cbe0f08247bd3f0fbe7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This global variable is no longer present, so pass in the value
specified via the command line.
(From OE-Core rev: fa90f92e52330a9bf5836c0832412af0927b19a9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When running the postinst script I get a shell warning:
sh: argument expected
and the service is never stopped. This patch fixes the warning
message and stops the service.
Patch v2: Hans Beckérus pointed out that the patch is not correct.
This version uses the syntax proposed by Hans. I've tested
that the postinst script works correctly when run on the target,
both when the init script exists and when it doesn't exist.
(From OE-Core rev: 7e23557835f756b22b95fa7a1926b5d1d21872c3)
Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5388]
These scripts can be useful when working to reduce the size of the Linux
kernel and the root filesystem.
ksize.py displays the kernel build size by the built-in.o files.
dirsize.py displays the various sizes of the components of the root
directory.
(From OE-Core rev: 26099eb8ac855aa08e5e1a307affe42fe5f43859)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tested with midori-browser on qemux86
and qemuarm.
(From OE-Core rev: 67a562d236735d1bb08e7c2f5ea01409f59741d3)
Signed-off-by: Valentin Popa <valentin.popa@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libpseudo.so is always installed into ${prefix}/lib/, not ${libdir},
so fix these paths; and skip libdir WARN_QA checking to ignore the
warning in 64bit and multilib enabled system
(From OE-Core rev: 47c7850c025994685aa1811057f4f9a5f0f2a3ae)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no need for += when using append hence removed and added a
leading space appropriately
(From OE-Core rev: fb9cde0fc1a54b073edf5979f4cb7dc297b790fd)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update recipes to version 2013h of timezone
code and data.
(From OE-Core rev: 95c9355c35d24b60f44857a8c2e3c9860a91d23b)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will allow apps using QLibraryInfo class to find qt.conf.
[YOCTO #5339]
(From OE-Core rev: fffa4c37c49b169f663d28612b9251819cef9577)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When installing the SDK to another location than the default one, qmake
will look for libraries, headers, etc. in the default location. That's
because the paths are hard-coded in the binary itself. Luckily, QT
allows to override this using a qt.conf file installed in the same
directory with the application executable. However, we already have a
patch that allows for the installation of qt.conf in another place and
read the location from QT_CONF_PATH environment variable.
Hence, install qt.conf in ${sysconfdir}. This will allow other apps, that
use QLibraryInfo class, to find it.
[YOCTO #5339]
(From OE-Core rev: 23f88695683a8e428375a8ccb6be935347a8768c)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This class disable introspection support using --enable-introspection=no but not
all GNOME modules support introspection.
This can cause unknown-configure-options QA warnings, so clarify the option by
using --disable-introspection and add it to the sanity test whitelist.
(From OE-Core rev: a97600330d626eb0ca75178a9011f1a63c8a29f3)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This include adds configure options globally but not all X libraries support
them, so to avoid unknown-configure-option warnings add them to the whitelist.
Also change the options from --enable-foo=no to --disable-foo as they're clearer
and the whitelist would have to contain --enable-foo.
(From OE-Core rev: 2544dc51fdebed77ff6eddf27d0ee897c5f5c257)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the following backported patch(es):
* mac.patch
(From OE-Core rev: ce04ba6a5385ad2d021d472cf9236787c6ea7357)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This isn't recognised by configure, and the random number daemon that requires
Pth isn't enabled.
(From OE-Core rev: 6553c807e19042d3b6add4e7c4b3999fb641abe6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This recipe doesn't need any of the helpers that come with gnome (GConf, icons,
MIME, etc), so just inherit gnomebase.
(From OE-Core rev: eadd68010f923edc12b4962074850ea724477a64)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This include adds configure options globally but not all X libraries support
them, so to avoid unknown-configure-option warnings add them to the whitelist.
(From OE-Core rev: 1f77801e6837b23d9123097dba77ca1374fbbea4)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a "lookup-recipe" command to show which recipe produced a particular
package.
(From OE-Core rev: 4ab561ac3df105b4b6487271b6ccc29445518d52)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a "lookup-pkg" command to oe-pkgdata-util that can be used to find
the runtime name of a package (after e.g. Debian library package
renaming).
(From OE-Core rev: d923846d91ae307372f1e48483e86807feeeb09d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add ability to search for a target path in produced packages, in order
to find which package provides a specific file.
(From OE-Core rev: 0824f2f5cf4e05f82b6986ce6fb22fa1392b7776)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Show an error if the specified paths don't exist.
(From OE-Core rev: eff2690f7976664e6257c1c19c89feea9152eb9e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Use optparse to parse command line
* Make help text actually helpful by describing what each command does
* Drop comment at the top listing the commands which is now superfluous
(From OE-Core rev: feb317513fff638ad7abdba8ab34b8413f0ab055)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE-Core commit 1b8e4abd2d9c0901d38d89d0f944fe1ffd019379 removed the
vendor-os argument from the command line, and the code using the package
architectures, so clean these items up.
(From OE-Core rev: 8b9ee57afbbcf633cba66e4b6e8ab7339ad6d391)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update pigz to latest release - 2.3.1
Drop ldflags.patch as it has been merged upstream
(From OE-Core rev: 8081dcb03f54efd551d1c8fe8a0484f8270053e0)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Code that was under ICU license has been removed.
(From OE-Core rev: 12e2e82a7cfcbcb989b5254b2148320db69a820d)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
png.patch dropped as it's part of upstream now
(From OE-Core rev: c645545d245e77a83a6ce2feb7211fbea0242d46)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
nfsserver restart without killing kernel threads worked when portmap
was the rpc publishing process and portmap was restarted.
When rpcbind replaces portmap, nfsserver restart in this way does not
work after an rpcbind restart.
Steps to reproduce:
1). Make ext3 filesystem image on local host.
cd /root
dd if=/dev/zero of=test bs=1024K count=50
mkfs.ext3 -F test
2). runqemu qemux86-64
mkdir /mnt/wrtest
mount -t ext3 -o loop test /mnt/wrtest
echo "/mnt/wrtest *(sync,rw,no_subtree_check,no_root_squash)" > /etc/exports
/etc/init.d/rpcbind restart
/etc/init.d/nfsserver restart
showmount -e localhost
mkdir wrtest
mount -t nfs localhost:/mnt/wrtest wrtest
mount: mounting localhost:/mnt/wrtest on wrtest failed: Connection refused
Modifying the nfsserver script to kill and restart kernel threads on
restart makes the problem go away and is consistent with current
RHEL/SUSE and Ubuntu/Debian mechanisms of handling the nfs server.
(From OE-Core rev: 1a96b8d7dfc490fc61bbd470a8b09065750cd563)
Signed-off-by: Rich Dubielzig <rich.dubielzig@windriver.com>
Signed-off-by: Qiang Chen <qiang.chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Do not consider automake warnings about future incompatibility
errors.
(From OE-Core rev: f7281ebf1fd593805f2cc10828ecb9723e1554d0)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristian Iorga
Roy Li
Konrad Scherer
Cristiana Voicu
Jonathan Liu
Tom Zanussi
Ming Liu
Hongxu Jia
Andreas Oberritter
Richard Purdie
Paul Eggleton
Jacob Kroon
Valentin Popa
Darren Hart
Khem Raj
Joe Slater
Laurentiu Palcu
Ross Burton
Maxin B. John
Marko Lindqvist
Qiang Chen