The commit '0e0d14ed1e88ebff876abb3d00b08627a3879e8d' introduced a new patch
nonstripbinaries.patch, the filename format caused the patch to not apply.
Simple fix made by correcting the path.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
The format of the syslog.conf files is different between busybox and sysklogd.
Use the alternatives method to ensure we get the correct config file for
any specific configurations.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
remove nonrootinstall patch, and use a patch named nonstripbinaries to modi
fy the /at-3.1.10.2/Makefile.in, so it can also handles stripping of the bi
naries
Fix [BUG 246]
Signed-off-by: Mei Lei <lei.mei@intel.com>
This commit fix [BUGID #482]
Two issues cause bug 482:
- firsty, there are two version of syslog: sysklogd and busybox.
the busybox one is directly installed as /etc/init.d/syslog,
and the sysklogd one is installed by update-alternative. the
update-alternative will thus fail because the /etc/init.d/syslog
(busybox one) already exist and not a link. so the correct way
is to install busybox one by update-alternative, the layout will be:
/etc/init.d/syslog.busybox
/etc/init.d/syslog.sysklogd
/etc/init.d/syslog -> syslog.busybox or
/etc/init.d/syslog -> syslog.sysklogd
- secondly, sysklogd default conf is not comply with poky. Its dir /var/adm/
does not exist. Check the debian /etc/syslog.conf and find it is more
sophiscated and suitable, so port /etc/syslog.conf from debian.
Signed-off-by: Yu Ke <ke.yu@intel.com>
update-alternatives.bbclass assumes /usr/bin/sed if ALTERNATIVE_LINK is not
specified, however sed has changed its default installation directory to
/bin/sed. This causes below errors at the first boot of lsb image:
update-alternatives: Error: cannot register alternative sed to /usr/bin/sed
since it is already registered to /bin/sed
This fixes [BUGID #478]
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
These files are removed in libc-package.bbclass. Missing of zone.tab cause
get_zone_directory in libical return NULL for strlen, which leads seg fault
of dates & tasks.
Openembedded has similar patch.
[BUGID #420] got fixed by this.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
This is the most recent version of cpio. Recipe derived from
OpenEmbedded's recipe for cpio v2.5.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
This is the most recent version of grep. Recipe derived from
OpenEmbedded's recipe for grep v2.6.3.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
rpmdb2solv provided by sat-solver is executed from within libzypp,
RDEPENDS sat-solver to get the utility included, fixes [BUGID #328]
Signed-off-by: Qing He <qing.he@intel.com>
The Linux man-pages project documents the Linux kernel and C library interfaces that are employed by user programs
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
libzypp failed due to GCC "internal compiler error: segmentation fault" error on
MIPS target. The cause is about boost tribool type usage. If having assignement
within conditional check as below:
if ( (a = b) )
...
<a is a tribool type, b is a normal bool type>
then gcc4.3.3 throws internal error. Then the workaround is to move assignement
out of the conditional check.
However I didn't find same case from web.
We can come back to recheck this issue after upgrading to gcc4.5.0 for MIPS. If
this issue is still there, we'll need more analysis to decide whether to report
to gcc upstream or to libzypp upstream.
This fixes [BUGID #277]
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
we use /usr/lib for x86-64 target, but sat-solver will use /usr/lib64 if 64bit
target arch is detected. This finally causes libzypp failed to find libsatsolver.a.
use "-DLIB=lib" to explicitly enforce the requirement
fix [BUGID #286]
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
parallel build was failing inconsistently due to missing dependancy
specification in the make file. Fixed it with a new patch.
Bug 180 reported this issue:
| arm-poky-linux-gnueabi-gcc -march=armv5te -mtune=arm926ej-s -c -I.
-fexpensive-optimizations -fomit-frame-pointer -frename-registers -O2
-ggdb
-feliminate-unused-debug-types -DHAVE_CONFIG_H -DVERSION=\"3.1.12\"
-DETCDIR=\"/etc\" -DLOADAVG_MX=0.8 -DDAEMON_USERNAME=\"daemon\"
-DDAEMON_GROUPNAME=\"daemon\" -DLFILE=\"/var/spool/cron/atjobs/.SEQ\"
-Wall
atd.c
| atd.c:511:2: error: #error "No mail command specified."
| make: *** [atd.o] Error 1
Fixed it with the recommended solution of defining SENDMAIL as /bin/true
Fixes [BUGID #180]
Reorganized the recipe file for cleanlyness.
Add the init script for at
As per Scott's wiki instructions added the this init script for at:
http://git.buildroot.net/buildroot/tree/package/at/S99at
add libpam to dependancy
And bumped PR.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Introduce rpcbind utility into poky which is a server that converts
RPC program numbers into universal addresses.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Mark Hatle
Mei Lei
Richard Purdie
Qing He
Yu Ke
Kevin Tian
Zhai Edwin
Saul Wold
Scott Garman
Xiaofeng Yan
Dexuan Cui
Nitin A Kamble
Dongxiao Xu