For customised image package removal change behavior.
From:
Only display the immediate dependents of the requested package
to remove, not the full dependent list, that is dependents of
dependents ...
Do not remove the displayed dependents, just notify the user
of the list.
To:
Display the complete dependent tree, traversing all reverse
dependencies starting from the package to be removed and then it's
dependents.
Change the modal dialog to note that all of these dependents will
be removed automatically.
[YOCTO #9121]
(Bitbake rev: 1185a5bfe1b05a1b63a927c9583dfc031fdac8a9)
Signed-off-by: Dave Lerner <dave.lerner@windriver.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use a constant to define the name for the toaster custom images layer;
this constant is then used to identify this layer in various places.
(Bitbake rev: 2540969ec71612af7f9041cadcc401513e9b357b)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The data available from buildstats is now more fine grained than
previously, so take advantage of that to enrich the data we save
against tasks:
* Store the CPU usage for user and system separately, and display
them separately.
* Disk IO is now measured in bytes, not ms. Also store the
read/write bytes separately.
* Store started and ended times, as well as elapsed_time. This
will enable future features such as showing which tasks were
running at a particular point in the build.
There was also a problem with how we were looking up the Task
object, which meant that the buildstats were being added to
new tasks which weren't correctly associated with the build. Fix
how we look up the Task (only looking for tasks which match the
build, and the task and recipe names in the build stats data) so
the build stats are associated with the correct task.
[YOCTO #8842]
(Bitbake rev: efa6f915566b979bdbad233ae195b413cef1b8da)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As we do with the popover snippet which shows dependencies inline in the
table also show dependencies which have both TYPE_TRDEPENDS and
TYPE_RDEPENDS.
Also remove obsolete comment
(Bitbake rev: d3b5f3b7ba4550e7cd03a37ca19ccd2fc0042b2d)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #9156]
For a customized image when adding a dependent package X that depends on
dependency package Y, in addition to adding X to appends_set and Y to
includes_set, make sure that Y is no longer in the excludes_set. Y may
have been added to the excludes_set by a prior package removal.
(Bitbake rev: 6b29d3297de2ae48a3ac5529ba0d22f895276b56)
Signed-off-by: Dave Lerner <dave.lerner@windriver.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The build dashboard doesn't show image and artifact files correctly,
as it shows the full filename for images and the filename plus
path relative to DEPLOY_DIR for artifacts.
Instead, show just the suffix for image files, and the basename
for artifact files.
(Bitbake rev: 8084dcdc283b4dc170f066c202f89d56ce1abbef)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This test was passing but because the assertion was the wrong way round
and should have expected the first one to pass and second one to fail,
in reality both were failing as the method for checking the invalid char
was incorrect.
(Bitbake rev: 932a92b8130d4815656dc885f0c6e4afa4502022)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the dependencies of packages which are added to the
CustomImageRecipe. Currently just handle the first tier of dependencies
as this is what we show in the UI.
(Bitbake rev: 5c44609a9bf9fb23241b7dd7c58b08901d75008d)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Check that the name for a new CustomImageRecipe doesn't already exist in
the project or in the database of existing recipes (e.g. from the layer
index). Also restrict the characters entered for the recipe naming
convention.
(Bitbake rev: f290d428460a07e73050ff613bc222cc8c04f5ec)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the file size of the packages and the total to the JSON response.
(Bitbake rev: bbbd304c49b0940a695d15273934edff95d70836)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The progress updater for the recent builds section makes a JSON
call to the project view URL to get progress for each build.
However, conversion of the builds pages to ToasterTable broke this,
as the JSON response no longer contained the data necessary to
populate the progress bars.
Move the recent builds query to the Build model, so that it is
accessible to the ToasterTables using it ("project builds" and
"all builds"), as well as to the "project" view.
Modify the code in the recent builds template to use the slightly
different objects returned by the recent builds query on Build.
(Bitbake rev: 5189252635ddc7b90c9a43aaed9f196c31e1dcad)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add response for GET to the xhr_customrecipe_packages ReST API
/xhr_customrecipe/<recipe_id>/packages/<package_id>
Thie response includes the id, name, version and dependency information
for the package.
(Bitbake rev: c45791fc85d26c43b0a3b0a459111d2ff5583540)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of doing a shallow copy of the package into the
CustomImageRecipe when we add packages we can now use the
CustomImagePackage as a M2M field on the Package to CustomImageRecipe.
Also switch to using Target_Installed_Package as the method to retrieve
the package list from the build.
(Bitbake rev: 4ebc81823b3aec6ecf38835acad5263a81eb41c5)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we create a CustomImageRecipe we create a Layer_Version and
Recipe for that Recipe to be in, we only need one Layer_Version for our
Recipes so if that Layer_Version is updated by building it we need
a slightly more custom version of get_or_create to take into account the
fields which we expect can change but still mean that the object we want is
valid and doesn't need to be created.
In the Recipe case this is when we're updating an existing
CustomImageRecipe as we allow people to create a recipe even when the
based on recipe hasn't been built so we need to update it once a build
has happened.
(Bitbake rev: 0fe2c72ab82c6de2825a390fbb460b892a7a9cfc)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Fix generic variable names such as "object" and "values" when not
needed.
- Use try catch instead of a queryset filter to return the custom recipe
object
- Be explicit about the fields returned for the custom recipe info field
- Remove redundant new_package field
(Bitbake rev: a1a69903a94264377666730b1eb4599e6f3b4398)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create a Packages table for use as the image details page.
Change the SelectPackagesTable table to inherit from the Packages table.
Remove the need for a separate view by adding the additional template
context items to the Table's page context.
(Bitbake rev: 336b1d8369d9e86ece78b63cb0e140e653216011)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
View to provide the custom recipe download feature. The recipe is
generated on-demand to make sure that it is the most current version of
the Custom recipe.
(Bitbake rev: 2101c854bb2d7ff1e3a4f00ad4d33d77859439ed)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the CustomImageRecipe generate_recipe_file_contents to generate the
recipe that we build from. Move creation of the dummy layer and recipe
object to the point of recipe creation as we need these objects before
the build time. Also update the methods to add and remove packages to
account for the CustomImageRecipe inheriting from Recipe.
(Bitbake rev: f3322567378d6038a00da0fab6c5641a1a8e5409)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When an artifact download is requested, Toaster goes through a
convoluted series of conditions to decide which file to push
to the response. In the case of build artifact downloads for
command line builds, this caused an ugly exception, as command
line builds don't have a build request.
To simplify and catch more corner cases, remove the code which
fetches files via the build environment (we only support the local
build environment anyway). Then push all requests along a single
path, catching any missing file errors, missing object errors
or poorly-formed URLs in a single except clause which always returns
a valid response.
Also modify the text on the "unavailable artifact" page so it
says that the artifact doesn't exist, rather than it "no longer"
exists (exceptions may occur because an invalid artifact was
requested, rather than an artifact which was removed).
[YOCTO #7603]
(Bitbake rev: 24e20db55c2933de5e58ca754b8fd5b624f47820)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor fixes to code formatting and small improvements from
code review.
(Bitbake rev: 2c97f3a5c6ae37de910deb90390c5b856a600c5f)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code in views.py for setting up the template context for
old non-ToasterTable views is no longer necessary, as this
is now implemented in tables.py.
The template files for these views have also been removed.
[YOCTO #8738]
(Bitbake rev: 2b5a13afb068c85466436914d8d4ac3b31bc5c02)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The conversion of some ToasterTable Build object querysets to
JSON caused a serialisation error. This is because one of the
fields in the queryset was of type decimal.Decimal, and our
serialiser didn't know what to do with it.
Add a clause to check for decimal fields and serialise them
so that correct JSON can be generated.
(Bitbake rev: fa6229d4edf5904ccaa9dc323d0ab2318d1ef314)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the all builds ToasterTable as the basis for the project builds
ToasterTable.
[YOCTO #8738]
(Bitbake rev: 87bcfb740dd2d9944e35a2a1f71cbf8ff3b266e9)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For better long-term maintainability, use ToasterTable instead
of Django template and view code to display the all builds page.
NB the builds.html template has been left in, as this will
otherwise cause conflicts when merging the new theme.
[YOCTO #8738]
(Bitbake rev: e0590fc8103afeb4c5e613a826057555c8193d59)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the old projects page and replace with the new
ToasterTable-based version.
NB although the projects.html template is no longer required,
it's been left in as there will be changes applied to it for
the new theme. These changes will have to then be transferred
from the projects.html template to projects-toastertable.html.
Similarly, the code for the projects page in views.py has been
retained.
[YOCTO #8738]
(Bitbake rev: ebe7831ef65e78a9d100f29a63311518577fc838)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The algorithm for finding the suffix for image files produced by
the build doesn't reference a list of known file suffixes, so
could be prone to error.
Modify how file suffixes are parsed from the file path so that
they are compared against a list of known types; if this fails,
use the part of the basename of the file path after the first
'.' character.
Also rationalise the places in the views code where we
extract the file name extensions for builds, so they both use
the same algorithm (before, the same code was duplicated in
two places).
[YOCTO #8417]
(Bitbake rev: dd1c509696b8ab5e593cc64637060a58e95fcd1f)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Image file suffixes are used in the project configuration page to
show a list of available image file types. This list is stored
as a function in the views code.
However, this list is also needed when parsing image file paths,
so that the suffixes can be shown in the "all builds" and "project
builds" tables.
Move the list of valid image file suffixes to the Target_Image_File
class to make is accessible in other places where it may be needed.
[YOCTO #8738]
(Bitbake rev: c2f20232077917552623fd0726d0820e50b04cae)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove compatible_layerversions() and replace calls to it with
calls to get_all_compatible_layer_versions().
The sorting done in compatible_layerversions() is not relevant,
and the code can be simplified by using get_all_compatible_layer_versions().
[YOCTO #8364]
(Bitbake rev: 7bca51277314f7c0b6ee0e0d470327dfd60d37fe)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than maintain data as part of the migrations (as was
done for the default project previously), create the default
(cli builds) project on demand as a by-product of getting
it from the database.
[YOCTO #8364]
(Bitbake rev: 5fd8e90ab9b81d1bd0d301bc1c91228ecbbea74b)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed SDKMACHINE from predefined set of variables
for the project as it causes bitbake build error:
SDKMACHINE is set, but SDK_ARCH has not been changed as a result
This variable does not need to be predefined as it's not used by
toaster.
It's still possible to specify it in project configuration
if needed. SDK_ARCH variable should be set too to avoid above
mentioned build failure.
(Bitbake rev: a6ab2a38ab666376b4a5e796d3a88929e8cbfb22)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As both modes can be used at the same time we can't have any
difference in UI between modes.
Removed all conditional statements that used BUILD_MODE.
(Bitbake rev: 4ce1559c2558bd0fd278ff02a1a93bec03c4156b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Our title tags are all over the place, and have no relation to the page
content. This commit adds a meaningful title tag to each Toaster page.
(Bitbake rev: 1ab8827d684a19a70f3b788aed2327bf30edffe2)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The user is redirected to the all builds page or all projects
page from the landing page, regardless of mode.
In build mode, this makes sense; but in analysis mode, we are
restricting the view to just the cli builds project. This means
that "all projects" and "all builds" only contains items relating
to this one project.
Modify the landing page so it redirects to the project builds page
for the cli builds project when not in build mode. Also remove
navigation elements which are irrelevant when not in build mode.
[YOCTO #8514]
(Bitbake rev: ae754655fa1bc5168f43e8821773e7b7b9440a5d)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "latest builds" sections of the "all builds" page
show builds for all projects. This is not appropriate
for analysis mode, where we can only affect the command-line
builds project.
Modify the "latest builds" section to only show builds for
the command line builds project if in analysis mode.
Also rationalise where we get the queryset of latest builds from:
we have a _get_latest_builds() function which was being used
to get the latest builds in most places, but not all.
Also modify _get_latest_builds() to sort by started_on, rather
than primary key, as assuming that a higher primary key value equates
with later start time is incorrect.
[YOCTO #8514]
(Bitbake rev: 52de2c8cd11fa743f8fd7cb0cf776eea622ac474)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We set a TOASTER_MANAGED env variable in the startup script,
which has a value of "1" if Toaster should run in build mode.
Add a BUILD_MODE variable to settings.py which is True if
TOASTER_MANAGED is set to "1", False otherwise.
Add this to the context for every template, so we can use this
information to conditionally alter the content of pages
according to the mode we're in.
[YOCTO #8514]
(Bitbake rev: f9cf4739fc85c9760ce748323dc7c8de3fa7eaec)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "New build" button should only be displayed if there are
user-generated projects, not if there is only the command-line
builds project. (Toaster can't run builds on behalf of the
command-line builds project.)
The "New build" form should also display as if no project has
been set (i.e. show the project and recipe text entries).
Add a variable which tracks the number of non-command-line projects,
then use this to hide the button when appropriate.
Also track whether the current project is the default one, and
use this to add extra conditions to when the "New build" text
entries are shown.
[YOCTO #8231]
(Bitbake rev: 07e7bc29a7d976941eeae997f78a25ed6edddfc8)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-enable the layer tooltips on the project configuration page.
This adds the required fields to the API used for the layer dependencies
to be able to show the metadata needed.
Also fixes link hrefs which were missing in the add layers confirmation
dialog (bug 8251).
[YOCTO #8295]
[YOCTO #8251]
(Bitbake rev: c7cb8255d0ab1fd7715e878c1c83ef0cd920387e)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used Layer_Version.get_alldeps api in layerdetails template
renderer to get list of layer dependencies.
[YOCTO 8004]
(Bitbake rev: 077d0f41a3bd9cf2802a1488f1d6156ccac7df1d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Artifact download links were broken because the function to
get the mimetype for the artifact was incorrectly using the
underlying mimetype library. The function was also attached
to the build environment controller, which was unnecessary, as
we only support local controllers anyway.
Remove the mimetype getter on the build environment and
use the one in the view code instead. This works correctly
and prevents the download error from occurring.
[YOCTO #8369]
(Bitbake rev: 805fb2a9388c728600596e9b845a5c7eeaebd99c)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
filemagic is used to guess the mimetype of files when a user
requests a download. However, this adds a dependency on an
external library.
Python does have a mimetypes module, though this guesses the
mimetype rather than doing anything clever with the actual
file content. But for our purposes, it's more than adequate.
(NB Django also uses this module when serving static files.)
Use this instead of relying on any external code, and remove
the filemagic dependency.
(Bitbake rev: 0dd0ac25d54c73f13812db04826b57b3d16ea43f)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
YOCTO #8131 records that the sorting by 'errors', 'warnings'
and 'time', and the filtering by 'errors' and 'warnings',
are broken in the 'all builds' and 'project builds' pages.
To avoid exposing broken functionality to users, comment
out the sorting and filtering in those columns until we
we have a fix for YOCTO #8131.
(Bitbake rev: 1f15557efc922bf460640eeaf1622453419bc9a6)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Display the most recent builds in the given project's build page.
[YOCTO #8186]
(Bitbake rev: ce9a7f1819a1897878ce154b3ee7e727a76165b0)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the Image customisation front end feature to Toaster.
Caveat - This feature is currently in development and should not be
enabled by default.
(Bitbake rev: 543586462b66434741f47f2884b4ccdeda5397b5)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implemented xhr_customrecipe API. To create a custom recipe from a
base recipe.
Implemented xhr_customrecipe_packages API to add/remove packages
to/from custom recipe.
co-authored see Signed-off-by
(Bitbake rev: 84be400237173970716616eeab6a37d776aa011b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix indentation to 4 spaces
(Bitbake rev: 076945ea026091dc709f7cfea01ef119d0572bf3)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implemented xhr_response decorator to decorate responses
from REST methods into Django HttpResponse objects.
This decorator should reduce amount of repeated code in
REST methods and make them more readable.
(Bitbake rev: bb0696f343aca44207581f15ff2b4f0045f7530c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This feature is currently under heavy development and should be used
with caution.
(Bitbake rev: ffc11b2c6c6bac4643233cc46418b025c94607c8)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch fixes the project builds view so it doesn't show
"in progress" builds or builds for other projects.
Note that this also modifies the "all builds" view to use
the same queryset filtering as the project builds. This is
to avoid excluding "in progress" builds more than once, which
is what was happening before.
The patch also has a minor change to ensure that when
displaying the project builds page, only builds for that
project are in the results.
The queryset filtering is now split over several lines so
you can see what's going on.
[YOCTO #8236]
[YOCTO #8187]
(Bitbake rev: 771c08b9be1f7875e0216e381ab0a81ef0d26256)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A RedirectException is used to redirect the client to the
correct page when their original request is missing the
required parameters (page, orderby etc.). However, the code
is difficult to follow.
Rather than catching RedirectExceptions and rethrowing them with
different view URLs, ensure that the RedirectException has the
correct URL in it when thrown by passing the original page
name to the _build_list_helper() method.
Modified from an original patch by
David Reyna <david.reyna@windriver.com>.
(Bitbake rev: 38f935647dd768a912b933adebfc9cb225a01a54)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dave Lerner
Michael Wood
Elliot Smith
Ed Bartosh
Belen Barros Pena
David Reyna
Alexandru DAMIAN