A new default SUMMARY and DESCRIPTION was defined for any package that
previously did not contain one. This value is based on the original
SUMMARY_${PN} value.
The new default SUMMARY and DESCRIPTION is used as a basis for all of
the automatic summary and descriptions for the various package splits,
include ${PN}, ${PN}-dbg, ${PN}-dev, ${PN}-doc, and locales.
A recipe may also override any of the automatic summaries by simply
specifying the value.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
The definition of NM was missing, causing certain configure calls to revert
to using the host system's version of NM. This can cause problems on some
MIPS based targets, but is theoretically wrong everywhere.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
This commit changes the sysroots path to be machine specific.
Changes includes:
1) STAGING_DIR_TARGET and STRAGING_DIR_HOST points to machine specific
paths.
2) task stamp files. Adding ${MACHINE} info into stamp files for
do_populate_sysroots and do_package tasks. Add a BB_STAMPTASK_BLACKLIST
to keep native, nativesdk, crosssdk, and cross-canadian stamp unchanged.
3) siteconfig path. Separate the site config path for different machines
to avoid one machine adopting the cache file of another machine.
4) sstate. Add machine name to sstate manifest file.
Change relocation code for sstate paths since sysroot is machine.
Keep native, nativesdk, crosssdk, and cross-canadian unchanged.
5) toolchain scripts. Change the environment path to point to machine
specific sysroots in toolchain scripts bbclass.
6) Relocate la files when populating to a different machine of the same
architecture.
7) Exclude STAGING_DIR_TARGET and STAGING_DIR_HOST parameter from sstate
siginfo since they contain ${MACHINE} information.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Original we used absolute path in sysroot-destdir for both native and
target recipes. This commit changes target recipes to use relative path
which is same as the image directory.
[sgw: merged with libtool sysroot work]
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
PACKAGE_ARCHS represents all compatible architectures for a given machine.
It makes no sense for this variable to change any task checksums as it doesn't
inject any machine dependency into any known task. Multimachine means machine
specific packages will be detected through other variables.
Before this patch, even native packaging tasks were ending up being marked as
machine specific.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Current fetcher has annoying "SRCREVINACTION" deadlock,
which occurs when SRCREV=${AUTOREV}=@bb.fetch.get_srcrev():
get_srcrev()->setup_localpath()->srcrev_internal_helper()
->evaluate SRCREV->get_srcrev()
current fetcher resolve the deadlock by introducing a
"SRCREVINACTION" condition check. Althoguh it works, it is
indeed not clean.
This patch use antoehr idea to break the deadlock: break
the dependency among SRCREV and get_srcrev(), i.e. assign
a specific keyword "AUTOINC" to AUTOREV. when Fetcher meet
this keyword, it will check and set the latest revision to
urldata.revision. get_srcrev later can use the urldata.revision
for value evaluation(SRCPV etc). In this case, SRCREV no longer
depends on get_srcrev, and there is not deadlock anymore.
Signed-off-by: Yu Ke <ke.yu@intel.com>
If this recipe doesn't reflect TARGET_ARCH in its name, only
one flavour of cross toolchain can be installed at once.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
If sstate was used to accelerate a build, the pseudo directory might not have
been created leading to subsequent task failures.
Also, sstate packages were not being installed under pseudo context meaning
file permissions could have been lost.
Fix these problems by creating a FAKEROOTDIRS variable which bitbake ensures
exists before running tasks and running the appropriate setscene tasks under
fakeroot context.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
This change allows the IMAGE_OVERHEAD_FACTOR (default to 1.2) to
adjust dynamicly how much space to add for each image, thus there
is 20% overhead space by default.
Signed-off-by: Saul Wold <Saul.Wold@intel.com>
Add the pkgconfig files that may appear into the shared directory into
the -dev globbing.
Also change the udev integration to remove the manual instance of the
shared directory .pc file.
Signed-off-by: Mark Hatle <mhatle@windriver.com>
If this isn't set, pkg-config will use its inbuilt paths which mean it can
end up looking in the native sysroot.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Change the pseudo integration:
* Uprev to latest open source version
* Restructure the patches to allow for many local DBs, as well as
pseudo specific lib dirs.
Signed-off-by: Mark Hatle <mhatle@windriver.com>
genext2fs 1.4.1 creates minimal inode number based on specified rootfs
directory. This is desired in some embedded devices as storage/memory
are precious. However it's not suitable in development phase where target
rootfs may be changed heavily on the fly (remote debug, test, ...).
Sometimes this may even cause "No space on device" error due to limited
free inodes exhaulted at the 1st boot.
Here a new option is added to allow falling back to original 1.3 behavior,
i.e caculating inode number based on specified bytes-per-inode parameter.
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
When using the fake chroot ability of pseudo, it will expand absolute
symlinks to their full non-fake path by default. The simple change disables
that behavior, as it is undesired when generating a rootfs.
Signed-off-by: Mark Hatle <mhatle@windriver.com>
Enable changing the data directory on the fly from the environment and then use
this feature within poky to confine pseudo usage to each WORKDIR.
This fixes issues that could be seen under heavy inode reusage e.g.
with rm_work.
Work based mainly off a patch from Joshua Lock but finished by Richard
Purdie.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
The current free space doesn't leave much room for using the image,
increase it. Patch from Saul Wold with tweaks.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Having PSTAGE_DIR be a top level directory by default doesn't make sense, move
it to be a child of the build directory so that it lives with all other built
output. Also move DL_DIR to a child of the build directory for the use case of
an unwriteable $OEROOT.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
* Switch from /usr/local/poky to /opt/poky
* Use a sysroots directory for both the "native" sdk binaries and the target
* Drop the meta-toolchain extras packages. These are replaced with packaged-staging.
* Change the nativesdk layout to match our usual filesystem layout
* Clean up various hardcoded prefix references
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Cross is no longer required so can go away, we now install cross packages into
the native sysroot and use them from there.
This patch includes updates to classes and some recipes which reference
CROSS_DIR. Others still need fixing an image can be built and run with this
patch applied.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Cross scripts now live in sysroot/$arch-distro-os/crossscripts, this conveys
that they are no longer native system dependant and emphasises their purpose.
Bump the staging ABI and implement a simple migration from ABI 3 to ABI 4.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Rename DEPLOY_DIR_PSTAGE to PSTAGE_DIR and move it outside of deploy.
Do soft assignment of a default variable inside bitbake.conf as
${OEROOT}/tmp/pstage.
Use a separate directory, PSTAGE_WORKDIR, to store transient packaged
staging files such as the stamp files and opkg.conf
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Mark Hatle
Richard Purdie
Dongxiao Xu
Kevin Tian
Yu Ke
Richard Purdie
Saul Wold
Joshua Lock
Mark Hatle
Nitin A Kamble