Manifest files containing the same duplicated prefix are wasteful on space
and ultimately this costs build time. Add support for manifest files with
common prefixes removed and use the prefix if the path isn't absolute.
(From OE-Core rev: 71e8c98238d627f9665faee9d7c226b9c07bd256)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you use subprocess.check_output() the traceback will contain the output
when the command fails which is very useful for debugging. There is no
good reason not to use this everywhere.
(From OE-Core rev: ad750dd1cc9d789abe723daddd098ce41d8547f5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is comparatively large and invasive. It does only do one thing, switching the
system to build using recipe specific sysroots and where changes could be isolated from it,
that has been done.
With the current single sysroot approach, its possible for software to find things which
aren't in their dependencies. This leads to a determinism problem and is a growing issue in
several of the market segments where OE makes sense. The way to solve this problem for OE is
to have seperate sysroots for each recipe and these will only contain the dependencies for
that recipe.
Its worth noting that this is not task specific sysroots and that OE's dependencies do vary
enormously by task. This did result in some implementation challenges. There is nothing stopping
the implementation of task specific sysroots at some later point based on this work but
that as deemed a bridge too far right now.
Implementation details:
* Rather than installing the sysroot artefacts into a combined sysroots, they are now placed in
TMPDIR/sysroot-components/PACKAGE_ARCH/PN.
* WORKDIR/recipe-sysroot and WORKDIR/recipe-sysroot-native are built by hardlinking in files
from the sysroot-component trees. These new directories are known as RECIPE_SYSROOT and
RECIPE_SYSROOT_NATIVE.
* This construction is primarily done by a new do_prepare_recipe_sysroot task which runs
before do_configure and consists of a call to the extend_recipe_sysroot function.
* Other tasks need things in the sysroot before/after this, e.g. do_patch needs quilt-native
and do_package_write_deb needs dpkg-native. The code therefore inspects the dependencies
for each task and adds extend_recipe_sysroot as a prefunc if it has populate_sysroot
dependencies.
* We have to do a search/replace 'fixme' operation on the files installed into the sysroot to
change hardcoded paths into the correct ones. We create a fixmepath file in the component
directory which lists the files which need this operation.
* Some files have "postinstall" commands which need to run against them, e.g. gdk-pixbuf each
time a new loader is added. These are handled by adding files in bindir with the name
prefixed by "postinst-" and are run in each sysroot as its created if they're present.
This did mean most sstate postinstalls have to be rewritten but there shouldn't be many of them.
* Since a recipe can have multiple tasks and these tasks can run against each other at the same
time we have to have a lock when we perform write operations against the sysroot. We also have
to maintain manifests of what we install against a task checksum of the dependency. If the
checksum changes, we remove its files and then add the new ones.
* The autotools logic for filtering the view of m4 files is no longer needed (and was the model
for the way extend_recipe_sysroot works).
* For autotools, we used to build a combined m4 macros directory which had both the native and
target m4 files. We can no longer do this so we use the target sysroot as the default and add
the native sysroot as an extra backup include path. If we don't do this, we'd have to build
target pkg-config before we could built anything using pkg-config for example (ditto gettext).
Such dependencies would be painful so we haven't required that.
* PKDDATA_DIR was moved out the sysroot and works as before using sstate to build a hybrid copy
for each machine. The paths therefore changed, the behaviour did not.
* The ccache class had to be reworked to function with rss.
* The TCBOOTSTRAP sysroot for compiler bootstrap is no longer needed but the -initial data
does have to be filtered out from the main recipe sysroots. Putting "-initial" in a normal
recipe name therefore remains a bad idea.
* The logic in insane needed tweaks to deal with the new path layout, as did the debug source
file extraction code in package.bbclass.
* The logic in sstate.bbclass had to be rewritten since it previously only performed search and
replace on extracted sstate and we now need this to happen even if the compiled path was
"correct". This in theory could cause a mild performance issue but since the sysroot data
was the main data that needed this and we'd have to do it there regardless with rss, I've opted
just to change the way the class for everything. The built output used to build the sstate output
is now retained and installed rather than deleted.
* The search and replace logic used in sstate objects also seemed weak/incorrect and didn't hold
up against testing. This has been rewritten too. There are some assumptions made about paths, we
save the 'proper' search and replace operations to fixmepath.cmd but then ignore this. What is
here works but is a little hardcoded and an area for future improvement.
* In order to work with eSDK we need a way to build something that looks like the old style sysroot.
"bitbake build-sysroots" will construct such a sysroot based on everything in the components
directory that matches the current MACHINE. It will allow transition of external tools and can
built target or native variants or both. It also supports a clean task. I'd suggest not relying on
this for anything other than transitional purposes though. To see XXX in that sysroot, you'd have
to have built that in a previous bitbake invocation.
* pseudo is run out of its components directory. This is fine as its statically linked.
* The hacks for wayland to see allarch dependencies in the multilib case are no longer needed
and can be dropped.
* wic needed more extensive changes to work with rss and the fixes are in a separate commit series
* Various oe-selftest tweaks were needed since tests did assume the location to binaries and the
combined sysroot in several cases.
* Most missing dependencies this work found have been sent out as separate patches as they were found
but a few tweaks are still included here.
* A late addition is that extend_recipe_sysroot became multilib aware and able to populate multilib
sysroots. I had hoped not to have to add that complexity but the meta-environment recipe forced my
hand. That implementation can probably be neater but this is on the list of things to cleanup later
at this point.
In summary, the impact people will likely see after this change:
* Recipes may fail with missing dependencies, particularly native tools like gettext-native,
glib-2.0-native and libxml2.0-native. Some hosts have these installed and will mask these errors
* Any recipe/class using SSTATEPOSTINSTFUNCS will need that code rewriting into a postinst
* There was a separate patch series dealing with roots postinst native dependency issues. Any postinst
which expects native tools at rootfs time will need to mark that dependency with PACKAGE_WRITE_DEPS.
There could well be other issues. This has been tested repeatedly against our autobuilders and oe-selftest
and issues found have been fixed. We believe at least OE-Core is in good shape but that doesn't mean
we've found all the issues.
Also, the logging is a bit chatty at the moment. It does help if something goes wrong and goes to the
task logfiles, not the console so I've intentionally left this like that for now. We can turn it down
easily enough in due course.
(From OE-Core rev: 809746f56df4b91af014bf6a3f28997d6698ac78)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The dependencies of do_package_write_* tasks are either going to be packaging
tools needed to build the packages, or, native tools needed at postinst
time. Now we've formalised this dependency pattern, drop the hardcoded
list and work based on the rule. The package creation tools are usually
the same tools needed at rootfs/postinst time anyway so the difference is
moot.
(From OE-Core rev: 8082c6aabf838a2cc5253d2bb1bd8867f2e1ba6a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It turns out that this check cannot work. We don't have the information
to know whether an sstate package is really needed at this point in the
execution, so we check the availability for things that we won't
actually end up needing later on. Thus we can't fail if some of these
aren't found or we'll get needless failures.
This check was intended to give earlier more accurate errors when sstate
artifacts failed to download, but that's not practical so we'll rely
solely on the task execution check that was added within the runqueue.
This reverts most of commit 9e711b54487c3141d7264b8cf0d74f9465020190 (we
still need to allow BB_SETSCENE_ENFORCE through from the external
environment since the eSDK relies upon that.)
(From OE-Core rev: ff29ac6901d04487312f554d9e62250a18729c6c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code wasn't working properly, tweak so that it works as expected and
the grep expression includes the right patterns. Not sure this code has ever
worked prior to this.
(From OE-Core rev: 6a46a974611c5262efefc21a11adb736c0fb206a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Fix not decoding output from grep ("Matched in b'manifest...')
* Fix showing "Matched in b''" if no match (show "not matched to any
task" instead)
* Drop the filtering out of .populate-sysroot from matched manifest
names - it should have been .populate_sysroot so it doesn't work, and
in any case the value of removing the task name is questionable given
that we aren't removing it for any other task, and that the rest of
the filename isn't only the task name, we might as well have the whole
thing. At least then you can do a find on that exact name without
wildcards and find it.
* Fix indenting of file list entries and indent "matched in" further
underneath
* Minor punctuation fixes
(From OE-Core rev: 4675ce43496898fccbac738835d7e92b1cca648e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a recipe installs a file or directory whose name contains square
brackets [ ] that form a valid glob expression and that file then they
won't be correctly removed from the sysroot, because we pass each path
in the sstate manifest to our oe.path.remove() function which calls
glob.glob() on the path passed into it and the expression won't
actually match the original filename. Since we don't expect to put any
wildcarded expressions in the sstate manifests, and we already have a
try...except around this, we can actually use os.remove() here instead.
Similarly, when we pass existing file paths to "grep" looking through
the manifests, we don't want those paths to be treated as regexes - so
use grep's -F command line switch.
Fixes [YOCTO #10836].
(From OE-Core rev: fd8a57861024fc82e15a2a4ec8c20ed0ebb242f6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
getVarFlag() now defaults to expanding by default, thus remove the
True option from getVarFlag() calls with a regex search and
replace.
Search made with the following regex:
getVarFlag ?\(( ?[^,()]*, ?[^,()]*), True\)
(From OE-Core rev: 2dea9e490a98377010b3d4118d054814c317a735)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
(From OE-Core rev: 7c552996597faaee2fbee185b250c0ee30ea3b5f)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't remove sigdata files, we also shouldn't remove sigbasedata files
as this hinders debugging.
(From OE-Core rev: 1ebd85f8dfe45b92c0137547c05e013e340f9cec)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The checkstatus function fires an event to notify bitbake UI about
the progress of the task, this function is implemented using ThreadPool
and is causing event lose when multiple threads tries to fire an event
(writes over socket/fd).
[YOCTO #10330]
(From OE-Core rev: 6e0bb9d141438c0051c32b0d3a247915b71ccb82)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sets a good example and avoids unnecessarily contributing to
perceived complexity and cargo culting.
Motivating quote below:
< kergoth> the *original* intent was for the function/task to error via
whatever appropriate means, bb.fatal, whatever, and
funcfailed was what you'd catch if you were calling
exec_func/exec_task. that is, it's what those functions
raise, not what metadata functions should be raising
< kergoth> it didn't end up being used that way
< kergoth> but there's really never a reason to raise it yourself
FuncFailed.__init__ takes a 'name' argument rather than a 'msg'
argument, which also shows that the original purpose got lost.
(From OE-Core rev: 33611b69c221cf875eba1c7cb599c256825ae470)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are some issues in sstate which can't be handled by file removal
alone. Currently there is no way to execute a command against sstate and
doing so is potentially problematic for things like dependencies. This
patch adds a mechanism where any "postrm" script is executed if its present
allowing some openjade/sgml issues to be resolved.
[YOCTO #8273]
(From OE-Core rev: 2268efd0cd3ddb40870c4c424d10444ba86d2849)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this a whitelisted path containing /../ breaks the test for a file
allowed to be provided by more than one recipe.
Noticed when local.conf contains:
DEPLOY_DIR = "${TOPDIR}/../deploy"
|ERROR: core-image-minimal-1.0-r0 do_image_complete: The recipe
| core-image-minimal is trying to install files into a shared area when those
| files already exist. Those files and their manifest location are:
| .../poky/deploy/images/qemux86/README_-_DO_NOT_DELETE_FILES_IN_THIS_DIRECTORY.txt
| Matched in b'manifest-qemux86-linux-yocto.deploy'
(From OE-Core rev: d82acf20541463b14a811788d28fb1db3539885b)
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
SSTATE_SKIP_CREATION variable will be used to skip creation of
sstate .tgz files. It makes sense for image creation tasks as
tarring images and keeping them in sstate would consume a lot of
disk space.
(From OE-Core rev: 7e821ccd221916ae8482b9113df2de704f4a99a4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a meta-recipe to bring the toolchain into the extensible SDK. This
was modelled on meta-ide-support but some adjustments were needed to the
dependency validation function in sstate.bbclass to ensure that all of
the toolchain gets installed into the sysroot. With this, after
installing a minimal eSDK you only need to run the following after
sourcing the environment setup script to get the toolchain:
devtool sdk-install meta-extsdk-toolchain
Addresses [YOCTO #9257].
(From OE-Core rev: 8110806b1b5534ae830a4fdd1a5293c86a712d0b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently PV is defined in meta/conf/bitbake.conf as a python
expression: "${@bb.parse.BBHandler.vars_from_file(d.getVar('FILE',
False),d)[1] or '1.0'}". As FILE is whitelisted it causes PV to
not depend on it. This causes sstate code to not detect that
PV changes when recipe filename changes.
Making PV to explicitly depend on PV variable value overrides default
behaviour. Instead of depending on python expression bitbake depends
on evaluated value of PV variable, which should fix the above
mentioned issue.
[YOCTO #9806]
(From OE-Core rev: 918646ca803d56004fb0ab7c21e86cc9cb14513d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If BB_SETSCENE_ENFORCE is set to "1" and an sstate package fails to
download outside of the whitelist specified by
BB_SETSCENE_ENFORCE_WHITELIST, then fail immediately so you can tell
that the problem was caused by failing to restore the task from sstate.
Part of the implementation of [YOCTO #9367].
(From OE-Core rev: 9e711b54487c3141d7264b8cf0d74f9465020190)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Show progress through bitbake's standard terminal UI when checking for
shared state object availability, since this can take some time if there
are a large number of tasks to be executed and/or the network connection
is slow.
Part of the implementation for [YOCTO #5853].
(From OE-Core rev: 1a064385d6921ec90b33c9064dafaab11a36267c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The syntax for octal values changed in python3, adapt to it.
(From OE-Core rev: 737a095fcde773a36e0fee1f27b74aaa88062386)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously the sstate was all downloaded to the same directory and then
symlinks were added in the directories that pointed to the siginfo and
sstate in the parent directory.
This change makes it so that now the files are just downloaded to the
correct location without the need for symlinks.
(From OE-Core rev: 55d25ed6b30ed7105d3b6421fbf2a03cea009a59)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids 'basehash changed' errors with python 3 but could break
build determinism in general.
(From OE-Core rev: 488f88fc12eea9788e5db1de354f0118e2c58878)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the SIGGEN_LOCKEDSIGS_TASKSIG_CHECK and
SIGGEN_LOCKEDSIGS_SSTATE_EXISTS_CHECK variables to replace
SIGGEN_LOCKEDSIGS_CHECK_LEVEL.
SIGGEN_LOCKEDSIGS_TASKSIG_CHECK will no control whether there is a
warning or error if a task's hash in the locked signature file doesn't match
the computed hash from the current metadata.
SIGGEN_LOCKEDSIGS_SSTATE_EXISTS_CHECK will control whther there is a
warning or error if a task that supports sstate is in the locked
signature file, but no sstate exists for the task.
Previously you could only have warning/errors for both controlled by
SIGGEN_LOCKEDSIGS_CHECK_LEVEL. This was an issue in the extensible sdk,
because we know sstate won't exist for certain items in the reverse
dependencies list for tasks. However, we still want to error if task
signatures don't match.
[YOCTO #9195]
(From OE-Core rev: 0fe2a5e5ffd01e926d0f3d4c78ad9910296e2d1a)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
At present, if a recipe is built which creates users/groups via
useradd.bbclass, those users/groups are not removed from sysroot
when the recipe/package is cleaned using clean/cleansstate/cleanall
or when a recipe is rebuild and 'unstaged' from the the sysroot.
The "userdel_sysroot_sstate()" provides that functionality.
[YOCTO #9262]
(From OE-Core rev: b5304ce438666a7418746f4ddd32703ae3188089)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
uninative needs to adjust NATIVELSBSTRING fairly late in the
configuration parsing process but the sstate code encodes it into
variables. Since this string doesn't vary on a per recipe basis, we
defer its expansion until usage time.
(From OE-Core rev: fb680ab8b3cf7aba9b579403b1aeb96d30762320)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: a6426479f6348524a904ba28c16c1e3c8793cb08)
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_cleansstate wasn't cleaning do_populate_lic sstate objects in the
native/cross case since the wildcard path entry wasn't being cleared
at the same time as the path extra prefix. Fix by clearing it at the
same time.
(From OE-Core rev: af72c507f5e20acf64b7431cee989af9908ef199)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable is only used by populate_lic tasks (gcc-source overrides it)
and refers to BPN. In recipes like gcc, where there are multiple variants,
it is resulting in sstate objects which encode PN (they install into a PN subdir)
but the sstate object reflects BPN. This leads to corruption between then and
eventually, warnings from image builds like:
WARNING: The license listed GPLv3 was not in the licenses collected for recipe gcc
WARNING: The license listed GPL-3.0-with-GCC-exception was not in the licenses collected for recipe gcc
WARNING: The license listed GPLv3 was not in the licenses collected for recipe gcc
WARNING: The license listed NCSA was not in the licenses collected for recipe gcc-sanitizers
WARNING: The license listed MIT was not in the licenses collected for recipe gcc-sanitizers
WARNING: The license listed GPL-3.0-with-GCC-exception was not in the licenses collected for recipe gcc
WARNING: The license listed GPLv3 was not in the licenses collected for recipe gcc
WARNING: The license listed NCSA was not in the licenses collected for recipe gcc-sanitizers
By referring to PN, as used by license.bbclass, this issue is resolved.
(From OE-Core rev: dd4a319efcfa1174ba0f48fd15cb446280c426e4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=2d89cff42af2bb0049224bfaaebaa2b21966169f
we added a workaround for dealing with lack of time sync between build
machines and their users.
This has turned out to cause problems for people who rely on timestamps
being preserved in sstate output.
Since our autobuilders are all in time sync with ntp, revert the commit.
[YOCTO #8996]
(From OE-Core rev: 004a8bffdb501a99530dab2bc1c5f3d44b97b8f7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
useradd has sstate [depends] for both do_package and do_populate_sysroot
yet the dependency validation code only covers do_package.
Add coverage of populate_sysroot, else the order inversion that [depends]
creates means unexpected installation of users of useradd.bbclass (e.g.
avahi do_populate_sysroot) in cases where it shouldn't be (e.g.
libnss-mdns -c packagedata).
The code needs to move above the other populate_sysroot intercept code
since there are specific cases we need to cover before that code.
The result of this change is more optimal installation of sstate objects
in common usage scenarios.
(From OE-Core rev: 21368b4a7934b3a199e61c1072416fd5c091e5ff)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When cleaning old builds from the sysroots, also print the sysroot architecture.
(From OE-Core rev: 98a98a4bf71f74b5c27291ee9a2ac14006377e49)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If there are lots of changes between the previous build and the build about to
start bitbake will potentially print pages of:
DEBUG: Stamp $BUILD/stamps/corei7-64-poky-linux/libdrm/2.4.66-r0 is not reachable, removing related manifests
Instead of spamming the console with this list, write the list of manifests only
to the debug log and simply write a count to the console. This way the user
doesn't get spammed but still knows what is happening if bitbake appears to
stall with heavy I/O.
(From OE-Core rev: e777b541c76dad293d1c214e46c00f8f78fe0539)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we "bitbake X -c packagedata" and the packagedata comes from sstate, we
don't need any of the tasks dependencies. This is similar to the
populate_lic case, we only care about the end result.
Therefore short circuit the dependencies so packagedata doesn't pull in
any other dependencies.
(From OE-Core rev: 76aa4f49db7d32bbd35703c64470fdfc63f403a4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was observed that do_fetch dependencies (e.g. subversion-native of tremor)
were being installed even when sstate was available and hence no fetch was
needed. This turned out to be due to the recursive nature of the rootfs
dependencies which include populate_lic.
We can explicitly whitelist these dependencies as being ones we don't
need to follow when installing sstate (the code defaults to being paranoid).
[YOCTO #8746]
(From OE-Core rev: 06c891f0fa6c7712eae233dd18612f1ab1889c45)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Maintaining an sstate mirror is complicated at the moment as only the main
sstate tgz files have their timestamp updated when they're used.
This causes problems as the siginfo files can be removed from the server
due to inactivity but the sstate fetch code tries to fetch them leading
to confusing warnings and reduced debug capability.
This change ensures we touch any sig/siginfo files present and should
help ageing of the objects on sstate mirrors. It doesn't handle the intermediate
task siginfo files but those are never fetched by the current sstate code
so are an order of magnitude less problematic.
(From OE-Core rev: 80b3974081c4a8c604e23982a6db8fb32c616058)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The package feed signing code supports the user providing the path to the gpg
binary and an alternative gpg 'home' (usually ~/.gnupg), which are useful for
both deployment and QA purposes.
Factor out the gpg command line construction to a function which can fetch both
of these variables, and also use pipes.quote() to sanitise the arguments when
used in a shell context.
[ YOCTO #8559 ]
(From OE-Core rev: 6daf138822bbbc46960121d3b76b42eaf19e7c0e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To avoid races between the sstate tasks/hooks using ${B} as the cwd, and other
tasks such as cmake_do_configure which deletes and re-creates ${B}, ensure that
all sstate hooks are run in the right directory, and run the prefunc/postfunc in WORKDIR.
(From OE-Core rev: 1d3bde02641f4b40030cf7e305ee3d7c2faabe29)
(From OE-Core rev: a026dbfa0ce4ee769ae2c714f27f4c4eaa4a0c73)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is useful in a few different contexts to see which files have been
written out by an sstate task; break out a function that lets us get the
path to the manifest file easily.
(From OE-Core rev: 090196dd2d8f4306b34b239e78c39d37cc86034c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Only fetch remote signatures if verification has been enabled, as otherwise the
fetcher throws errors that sstate.bbclass can't ignore.
[ YOCTO #8265 ]
(From OE-Core rev: aa8ba5c4af2636dbc2d0c1ad9c230e8aa26d9962)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To provide some element of integrity to sstate archives, allow sstate archives
to be GPG signed with a specified key (detached signature to a sidecar .sig
file), and verify the signatures when sstate archives are unpacked.
(From OE-Core rev: 237b6c51b42b0c64434dc45685e10f757ac939c2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Rename from gtk-update-icon-cache to gtk-icon-utils to better
reflect the content. Fix references in other recipes and classes
* Upgrade to GTK+ 3.16.4
* Add gtk-encode-symbolic-svg binary: it is used by icon themes
(e.g. Adwaita) to generate png versions of svg icons.
* Depend on librsvg-native for gtk-encode-symbolic-svg
* Add a patch that removes Gdk dependency from gtk-encode-symbolic-svg:
this way the native build stays slim.
(From OE-Core rev: 5f4fe36f735ff8b97c5112b16bd90e794053573d)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update sstate_create_package and sstate_unpack_package to remove
redundant initial mkdir and cd commands. The working directory is
now setup correctly before the shell functions are called.
(From OE-Core rev: fd2d50d46e38d86829f88b5884a6fde6c38f155e)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use FetcherConnectionCache to improve times when do checkstatus over
sstate resources.
[YOCTO #7796]
(From OE-Core rev: e6f66370c6ce15aca18ef64491bab3dc92b80c57)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add init/end helper functions for ThreadWorker also pass ThreadWorker
as first argument to init/end/func functions this enables per-thread
storage handling.
classes/sstate.bbclass: Add thread_worker argument to checkstatus
function.
(From OE-Core rev: 08c50d62b520c8405f034e3d7adeea89e06226ee)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to fix Thread leakage caused by not call join() in Threads,
Pass num_tasks in ThreadPool for add all the tasks into a Queue this
enable catch of Queue.Empty exception and exit the threads.
classes/sstate.bbclass: Change checkstatus function to match new
ThreadPool operation.
(From OE-Core rev: 524d92ed7b53bef933527095e82f378b934f25ef)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie
Paul Eggleton
Joshua Lock
Aníbal Limón
Ulf Magnusson
Max Krummenacher
Ed Bartosh
Randy Witt
Maxin B. John
Markus Lehtonen
Ming Liu
Ross Burton
Jussi Kukkonen
Andre McCurdy