* Imported from rev 13ae5105ee30410136beeae66ec41ee4a8a2e2b0
This is the first step to move these recipes over to qt5.
* maliit-framework-qt5: Build with qt5
Switch to new github repo
Update SRCREV and remove patches which now longer apply
Disable doc generation and xcb
Fix packaging
* maliit-plugins-qt5: Build with qt5.
Switch to new github repo
Update SRCREV and PV
Fix packaging
* maliit-*-qt5: Adjust MKSPEC path
* meta-framework-qt5: Cleanup packaging and enable dbus activation.
Move pkgconfig files, headers and spec files into dev.
Cleanup packaging rules
Enable dbus activation to start maliit server on demand
* maliit-plugins-qt5: Set MALIIT_PLUGINS_DATA_DIR to avoid path leakage from host
If not overriden here MALIIT_PLUGINS_DATA_DIR would point to some host
paths resulting in e.g. qml files not being found.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
If you perform a "bitbake -c devshell <some qt5 recipe>" and then try "which
qmake" in the devshell, you'll find your host's qmake is found (which is most
likely to be based on qt4) rather than the one that is built as part of
meta-qt5. The reason for this is that the qt5 items are installed to
${STAGING_DIR_NATIVE}/usr/bin/qt5 and not ${STAGING_DIR_NATIVE}/usr/bin. The
reason for the extra "qt5" directory at the end is so that qt4-based items
that are built in OE can live side-by-side with things from meta-qt5 without
interfering with each other.
This patch prepends ${STAGING_DIR_NATIVE}/usr/bin/qt5 to the devshell's PATH
so that the qt5-based native tools which are built as part of meta-qt5 will be
found before the host's.
Signed-off-by: Trevor Woerner <trevor.woerner@linaro.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Building qtwebkit causes a QA issue such that QtWebPluginProcess and
QtWebProcess contain bad RPATHs which point into the build location. This fix
adds a patch to not include the rpath.prf which causes this problem.
Signed-off-by: Trevor Woerner <trevor.woerner@linaro.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
:Release Notes:
Add optional Qt-Tools module.
:Detailed Notes:
Qt provide optional Qt-Tools like "lrelease", etc.
In absence of these tools one can not have i18n and l10n changes automated in build.
Adding "qttools-native" to "meta-qt5" Open Embedded layer provides those tools.
Using Qt-Tools i18n and l10n changes can be auomated.
:Testing Performed:
:QA Notes:
:Issues Addressed:
[GF-11028] Enable build of Qt localization tools in the Qt component
Change-Id: Ieb679249a05501a6ccb25108903a0fd48d4014f0
* fixes:
NOTE: multiple providers are available for runtime qtwebkit-examples (qtwebkit-examples, qtwebkit)
NOTE: consider defining a PREFERRED_PROVIDER entry to match qtwebkit-examples
NOTE: multiple providers are available for runtime qtwebkit-examples-dev (qtwebkit, qtwebkit-examples)
NOTE: consider defining a PREFERRED_PROVIDER entry to match qtwebkit-examples-dev
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* full GL is called desktop in qtbase configure
* without this it will try to autodetect and doesn't fail when
e.g. mesa wasn't built before qtbase
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
They moved the 5.0.2 sources into an archive dir upstream, this updates
the SRC_URI accordingly.
Signed-off-by: Erik Botö <erik.boto@pelagicore.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* only for qt 5.1.0; didn't had the time to port this to 5.0.2
* client recipes need to export OE_QMAKE_PATH_EXTERNAL_HOST_BINS in EXTRA_OECMAKE
Signed-off-by: Simon Busch <morphis@gravedo.de>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* 5.0.2+git should stay default for people without qt5-versions.inc
* make sure that % isn't appended twice in qt5-versions.inc
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* While building a custom rootfs using poky, meta-oe, meta-ti
and meta-qt5 (all on Dylan branch), I got the following error:
[...]
Computing transaction...error: Can't install
qtbase-tools-5.0.2-r2.0@armv7a_vfp_neon: no package provides /usr/bin/perl
[...]
* syncqt is perl script with /usr/bin/perl shebang, that's why rpm
was complaining (other package managers in OE doesn't check that)
Signed-off-by: Christian Gagneraud <chgans@gna.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* this will need small patch in qtmultimedia.pro to run
qtCompileTest(openal) only with OE_OPENAL_ENABLED
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* it's autodetected from sysroot, make it deterministic
* maybe I should allow to change gst-0.10 to 1.0 without
rewriting DEPENDS
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* qtwayland fails, because we'll need to add qtwayland-native to provide
qtwaylandscanner in QT_EXTERNAL_HOST_BINS location (otherwise build
will try to use /usr/bin/qt5/qtwaylandscanner)
* native recipe is needed to build qtwayland-scanner which
is required after this upstream commit
commit 05d054ad7207764293525661876ebc689940a15c
Author: Samuel R<C3><B8>dal <samuel.rodal@digia.com>
Date: Tue Apr 9 16:52:59 2013 +0200
Introduced qtwaylandscanner.
Signed-off-by: Simon Busch <morphis@gravedo.de>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* some options are tri-state and PACKAGECONFIG doesn't support that
if you need the 3rd option, you need to overwrite PACKAGECONFIG[opt]
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
the patch 0017-Rename-qAbs-Function-for-timeval.patch is also
needed for native else, on Fedora 19, we get :
| ../../include/QtCore/../../../qtbase-opensource-src-5.0.2/src/corelib/global/qglobal.h:483:27: error: from previous declaration 'constexpr T qAbs(const T&) [with T = timeval]'
| Q_DECL_CONSTEXPR inline T qAbs(const T &t) { return t >= 0 ? t : -t; }
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Currently fontconfig support is autodetected. It is better to be
deterministic. Since qtbase-fonts is not installed where fontconfig
will find it, it seems that current users are not using fontconfig.
Signed-off-by: Philip Craig <phil@blackmoth.com.au>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The proper 'virtual' name for EGL is virtual/egl, not virtual/libegl,
as per meta/recipes-graphics/mesa/mesa-common.inc.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* 0002-Fix-null-pointer-access-in-QQuickVisualDataModelPriv.patch is
applied in newer SRCREV
* 0001-Fix-wrong-calculation-of-viewPort-for-transitions.patch is still
pending
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* 3 backports from newer qtdeclarative:
System Hang while moving App Ribbon
Fix for segfault in some ListView Cases
Make use of BGRA texture format to improve image upload time
* 1 pending fix:
Fix for ViewTransitions not working in horizontal ListViews
Signed-off-by: Florian Haenel <florian.haenel@lge.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
0018 - Offset support for QOpenGLPaintDevice is required for
speedup WebKit hardware rendering.
0019 - Fix FBO restoring in QOpenGLTextureGlyphCache
Jira task
0020 - Uses right texture format to exclude extra convertion.
Signed-off-by: Alexander Irhin <alexander.irhin@lge.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
- fonts were not installed (at least in qt 5.0.2) so install
them manually.
- split the font package in smaller package as done in qt4 to
save space on the target.
- use OE_QMAKE_PATH_LIBS which corresponds with:
mkspecs/features/qpa/genericunixfontdatabase.prf: fonts.path = $$[QT_INSTALL_LIBS]/fonts
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* WARN: because these modules weren't released yet, we need to make sure to
use SRCREV compatible with selected PV for other modules, old revisions
were compatible with 5.0.[01], I need to test these new SRCREVs to test
git versions
* tested with 5.0.2 and 5.0.2+git%
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* all patches applied in recipes should be also applied in
https://github.com/meta-qt5/qtbase branches to make it
easier to upgrade to new version without loosing any
patches
* apply:
0013-Disable-mkv8snapshot.patch
0014-enables-tslib-device-to-be-read-from-env-variable.patch
0015-qtbase-allow-build-of-examples.patch
also for git version, only
0016-configure-add-tslib-support.patch
is now 5.0.2 specific (similar patch already applied in stable branch)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* maintaining 4 different versions requires a lot more testing of
changes in .inc files and we have only one version of modules without
release (only one _git.bb) and it's impossible to find SRCREV which
would be compatible with all 4 versions.
* 0005-AddSynchoronization-qimagereader.patch was already backported to
5.0.2 in upstream
* 0001-Flickable-Fix-bug-when-flicking-twice-using-touches.patch was
already applied in 5.0.2
* 5.0.2 is now default version (based on DEFAULT_PREFERENCE and in
qt5-versions.inc
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
- the tslib support is not enabled by default and configure doesn't have any option
to active it, so add the option to the build system,
- patch tslib support to get the device from the environment variable
(patch taken from https://github.com/prabindh/qt-configs/blob/master/qt5_1.0_Feb13/tslib.patch
- provide variable to enable tslib support in a bbappend (disabled by default)
- tested on an i.MX5x target with qt 5.0.2
TODO : test with 5.0, 5.0.1 and _git
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
- fix v8 segfault (at least on armv7)
- examples are only provided as sources but in our case, binaries
are more interesting for user to test the features on the target.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* drop Change-Ids, add Upstream-Status
* 0010-qmake-property-rename-QT_INSTALL_CONFIGURATION-to-QT.patch was
rejected upstream, 0007 was only in meta-qt5/qtbase repo, but wasn't
used in recipes
* 0004-Disable-mkv8snapshot.patch and
0005-AddSynchoronization-qimagereader.patch are special, because they
are applied only to 5.0.0
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* returning QSettings even without existing qtconfig was causing,
e.g. QLibraryInfo::location(QLibraryInfo::PluginsPath) returning
"`pwd`/plugins" instead of correct "/usr/lib/qt5/plugins"
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* and move it to separate .bbclass which is easier to
replace in distro layer when you don't care about
conflicts with qt4
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* endian option was removed from configure
* arch/host-arch option is now deprecated and configure shows
warning when it's used
* both are now autodetected
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* makes it easier to change desktop gl to gles2 in .bbappend
* we cannot explicitly disable opengl with -no-opengl, because then it
fails to build (probably only when mesa headers are found in sysroot)
/qtbase-opensource-src-5.0.0/src/platformsupport/eglconvenience/qeglplatformcontext.cpp:62:72: error: 'QPlatformOpenGLContext' has not been declared
/qtbase-opensource-src-5.0.0/src/platformsupport/eglconvenience/qeglplatformcontext.cpp: In constructor 'QEGLPlatformContext::QEGLPlatformContext(const QSurfaceFormat&, int*, EGLDisplay, EGLenum)':
/qtbase-opensource-src-5.0.0/src/platformsupport/eglconvenience/qeglplatformcontext.cpp:69:70: error: invalid static_cast from type 'int*' to type 'QEGLPlatformContext*'
The same with 5.0.2
Signed-off-by: Simon Busch <morphis@gravedo.de>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* we're using QT_DIR_NAME subdirectory mostly to prevent conflicts with existing files from qt4
but setting it in all OE_QMAKE_PATH_* variables causes all apps which are just using qmake to
build to install e.g. in /qt5 which for stuff like qterminal or something doesn't
sound right (as long as there isn't qterminal4 and qterminal5 recipe)
* some variables are kept with default QT_DIR_NAME, e.g. qml, imports, plugins we can assume that
every application which installs some QML files will install them in location shared by all
* add qt5-native.inc which also adds this QT_DIR_NAME and common
inherits (later will be used also by qtwayland-native.inc)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* "${B}/*" in quotes doesn't match anything, better to remove whole directory
(incluing .files) and recreate it
* not sure why I've added quotes after testing first version, we don't
expect B with spaces.. but I'm a bit scared with rm -rf ${SOME_VAR}
after one glibc upgrade cleaned my whole disk and attached NFS array
when OLD_LOCALE_PATH wasn't detected correctly...
* qmake works well with separate B, use it by default
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* not all modules depend on qtbase, qtbase-native dependency is added
by qmake5.bbclass:
QT5TOOLSDEPENDS ?= "qtbase-native "
DEPENDS_prepend = "${QT5TOOLSDEPENDS}"
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* 5.0.2+git was installing uic in wrong directory STAGING_DIR_NATIVE
was there twice, while debuging this I've noticed that headers and docs
are installed in this wrong directory also in other versions
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* all variables should be now correctly set by qmake
* setting PARALLEL_MAKE in MAKEFLAGS can cause
PARALLEL_MAKE * PARALLEL_MAKE processes, because first
-j is applied on top level directory and then again in
each subdir, but it's faster then make -j PARALLEL_MAKE
only in top directory
* setting QMAKE breaks build in src/tools/bootstrap, because it
forces relative path bin/qmake which isn't correct
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* when uic does not exist in QT_EXTERNAL_HOST_BINS it will silently switch to
/usr/bin/qt5/uic and build will fail a bit later
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* it was working for LIC_FILES_CHKSUM, but not LICENSE
* we need to change order of includes, first version.inc then module.inc
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* MJ: fix PV
* MJ: simplified to use newer classes
* MJ: Add license information
* MJ: use OE_QMAKE_PATH_QML for packaging definition
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* MJ: fix PV
* MJ: simplified to use newer classes
* MJ: Add license information
* MJ: use OE_QMAKE_PATH_QML for packaging definition
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* MJ: simplified to use newer classes
* MJ: Add license information
* MJ: use OE_QMAKE_PATH_QML for packaging definition
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* MJ: simplified to use newer classes
* MJ: Add license information
* MJ: use OE_QMAKE_PATH_QML for packaging definition
* MJ: add missing sqlite3 dependency
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* Disabling this for the time being as it generates invalid
instructions when the target is arm.
Signed-off-by: Mikko Levonmaa <mikko.levonmaa@palm.com>
Signed-off-by: Martin Jansa <martin.jansa@lge.com>
* Fix shader precision definition
* MJ: Fix license information
* MJ: Fix PV
* MJ: add wayland-native to depends for wayland-scaner
* MJ: add libxkbcommon to depends, but make it easy to remove it
Signed-off-by: Mikko Levonmaa <mikko.levonmaa@palm.com>
Signed-off-by: Martin Jansa <martin.jansa@lge.com>
* MJ: Add license information
not sure which parts (or maybe all) is under LICENSE.PREVIEW.COMMERCIAL
* MJ: Fix PV
Signed-off-by: Mikko Levonmaa <mikko.levonmaa@palm.com>
Signed-off-by: Martin Jansa <martin.jansa@lge.com>
* With isis2 touch mocking there is a situation where flickable doesn't
process mouse events even if it has mouse grabbed.
* Patch is cherry-picked from upstream.
Signed-off-by: Heikki Paajanen <heikki.paajanen@palm.com>
Signed-off-by: Martin Jansa <martin.jansa@lge.com>
* thanks to Mikko Levonmaa
* move it from qt5.inc to qmake5_base.bbclass, because it can be useful
for other apps too
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* some modules weren't released yet, so we still need some recipes with
PV = "4.999+5.0.0-beta1+git${SRCPV}"
so having 5.0.2 in .inc filename is a bit misleading
* .inc file still sets default PV (now "5.0.2+git${SRCPV}"), all modules
where SRCREV corresponds to different versions need to set PV inside
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* makes it easier to change them, should be reused also in FILES_*
variables
* table of path variables and their different names available at
https://github.com/meta-qt5/meta-qt5/wiki/Building-with-OE
* all variables have OE_QMAKE_PATH_ prefix and then name from qmake
varaible
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* don't export it, let recipe decide where to call it or even if it
should be called (native recipes are not using it)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* otherwise sysroot from native build can leak to target build
* missing paths like Qml2Imports were defaulting to devault /usr/qml
* synchronize values between qt.conf and configure params
* qt_module.prf replacements were creating -L/usr/lib in .pc files which is bad for cross-compilation
* also use '=' for sysroot in libtool files
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* using ${libdir}/${QT_DIR_NAME} is causing pkgconfig files to be
installed in this prefix too
* modify ArchData variable to move mkspecs files to qt5 prefix (so that
they don't conflict with qt4)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* there are important fixes in qtbase bootstrapping
* create also own directory for patches, easier for many versions to coexist for now
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* patch files are kept in separate dir, because I expect that 5.0.1
will have to live a bit longer for e.g. webkit-qt developers to adapt
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* there are some issues with 5.0.1 and qt-webkit, keep 5.0.0 available
until everybody is ready to upgrade to 5.0.2 or newer
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* add linux-oe-g++ mkspec directly with patch
* add functions to read and eval OE_QMAKE functions from mkspec and
also export them with QMakeVar to be available also for config.tests
* add external-host-bindir parameter to skip building native tools
even when we're in fact cross-compiling (because we have them from
qtbase-native build already).
* use separated ${B} and ${S} and clean ${B} when reconfiguring
stalled qmake cache can be used when configure is reexecuted
cleaning ${B} prevents that and provide cleaner separation
* OE_QMAKE_AR cqs is added by Makefile, having it here too was causing
issues
* isEmpty(QT_EXTERNAL_HOST_BINS) doesn't work, so lets use exist()
even when it allows to incorrectly set wrong directory and build
native tools again (instead of skipping them)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* qmake is trying to call native gdb and we don't depend on gdb-native
(or even provide gdb-native)
* fixes errors like this:
/bin/sh: gdb: command not found
/bin/sh: line 0: test: -gt: unary operator expected
which are not fatal, but still misleading in do_configure output
* g++.conf and linux.conf were outdated a lot, lacking new options like
QMAKE_COMPILER causing a lot of warning like:
Project WARNING: qmake spec does not announce the compiler family. Guessed gcc.
* Instead of replacing whole common files, use custom qmake.conf which
overwrites common setting after including it
Stefan Schmidt
Trevor Woerner
Tasslehoff Kjappfot
Laszlo Papp
Martin Jansa
Bhooshan Supe
Abhijit Potnis
Simon Busch
Marek Belisko
Erik Botö
Jonathan Liu
Christian Gagneraud
Eric BENARD
Philip Craig
Nicolas Dechesne
Martin Jansa
Florian Haenel
Janne Kiiski
Alexander Irhin
Oleg Shparber
Ian Reinhart Geiser
Byungseon Shin
Mikko Levonmaa
Heikki Paajanen