Fixes [YOCTO #5566]
For the dev-manual, I created a new section called "Working
with Source Files." In the section, I cover how to set up mirrors
and also how to pre-fetch source using the bitbake -c fetchall
<target> command.
For the yocto-project-qs, I removed the mirror information in the
"Super User" section, which became redundant with the new section
now in the dev-manual. I also, removed the fetchall variation of
the bitbake command. Both areas reference into the new section of
the dev-manual now.
(From yocto-docs rev: f314061e3e752d35ea85ed16a60f7f9292180921)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5895]
Some minor edits to the section. I found a grammar error and a
mis-wording.
(From yocto-docs rev: 86e85512279a1379d9b30825d6af3e508faa320a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I scrubbed the manual set for appropriate places to reference into the
do_clean* type tasks. Found and added several occurrences.
(From yocto-docs rev: 01594823b1d556bc70e928af1838039cc15a816d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Failure occurs during make, not do_compile as I previously
noted.
(From yocto-docs rev: 467ea8aa43fac14e3092a30ae15d1ace7a6558ab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6390]
Edits to the "Debugging Parallel Make Races" section. Changes
originating from trying the procedure.
(From yocto-docs rev: 537f5bd8918450e30ea87465025f0069232cb229)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6390]
This is a section on parallel make race situations. The draft
is the first cut at the section.
(From yocto-docs rev: c225d7fe121270a6f82b9fbffa78c7e3914b113d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was inconsistency on how we refer to a task name throughout
the YP manual set. The proper way is "do_<taskname>". Some
occurrences did not include the "do_" prefix. These have been
fixed.
(From yocto-docs rev: b32821bb0d3e6de7bca68b25c662a023526a10c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a bit more to the ending of the sentence to qualify
its meaning.
(From yocto-docs rev: 40b309a43d948d5800cfe908e72f6202c095a166)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Received and implemented some feedback from Paul Eggleton
on this section. These were unsolicited observations.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: 48ecc543d9f614b5258ab2573f0406aa3c778647)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5895]
I applied some review comments from Paul to tighten up this section.
(From yocto-docs rev: 9f17ad00e9e707fcd6f2419762b4281d64f4ed0f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new "Overrides" bullet item and fixed some minor issues
pointed out by Paul Eggleton.
(From yocto-docs rev: 44ff3d82985fa304c5641570fe72cf6a8ddabaa3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton sent me some feedback on this section. I implemented
his suggestions. Changes were minor. One included a cross-link
to the BitBake User Manual.
(From yocto-docs rev: e9b5f252a1368b8c231dd659428a18eacf9757af)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5895]
I created a new section in the dev-manual titles
"Creating a Custom Template Configuration Directory" that describes
how the build system uses the template local.conf and bblayers.conf
and conf-notes.txt files as a basis when creating the real
deals in the build directory's conf folder. The context of this
is so that the user can create their own directory with their own
template files for repeated configurations and to create a custom
conf-notes.txt file should they want the setup scripts to display
some custom list of targets.
I also modified the two script references in the ref-manual for
oe-init-build-env and oe-init-build-env-memres. I needed to
link to the "how-to" section and added a bit in there about how
the scripts go about forming the conf files in the build directory.
(From yocto-docs rev: c07fb7082fe08387bbc546b2a23620dedc7127b8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Writing a New Recipe" section has a subsection named
"Packaging." We needed a cross-reference here to the QA checks
performed for packaging.
(From yocto-docs rev: 34952ee1b56a84e0ee0edd142c7c8c68b122a3e3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5482]
I applied some review edits as directed by Paul Eggleton. The
main feature was to merge the information on setting root
and extra user's passwords. Also, permanently removed the
reference to the wiki that showed the less optimal way of
setting a root password.
(From yocto-docs rev: fef0e17cd3835580abed175ef4a7baf22b9b7673)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5482]
Applied extensive review edist from Paul Eggleton throughout
this section.
(From yocto-docs rev: aa0bcd9199c83b43bad2390ff2292a8c2abe7455)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5482]
I added some key references to the section on considerations
specific to the OpenEmbedded build system. In particular, I
provided some cross-linking back to the extrausers.bbclass
section to reference an example of adding a user account. I
also split out the topics of adding an extra user and setting
a password on the image in the bulleted list.
(From yocto-docs rev: 19dcd70b9b5aba1bd5e7ce090d5449afcef726bf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5482]
I did some significant re-writing and re-organization of this
section. It now includes a bit about securing an image in general,
provides general considerations, considerations specific to the
OpenEmbedded build system, pointers to some tools in meta-security
layer, and some other items.
(From yocto-docs rev: a900286992e781f451b3c180726965f5c7172bb9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the creation of the new chapter that documents the 51 tasks
defined by the OpenEmbedded build system, the dev-manual had
many first-instance occurrences of do_* task names that could
be cross-referenced to the new sections. I have added these links.
(From yocto-docs rev: 78f91987b0ad9906571ec7888334301492361822)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6243]
This section addresses situations when working with recipe
file names of recipes that have not been released (e.g.
recipe-name_1.0.3.rc1). When the recipe is released the system
has difficulty recognizing the new recipe name as a later version.
So the work-around is to use PV to set the recipe version in
the recipe. The section describes this.
(From yocto-docs rev: 612379f44e772cfc381e31171ae18af24a9e44fe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I was using this term inconsistently. I have cleaned it up so
that no initial capital is used.
(From yocto-docs rev: 7dea2c5ef067d81b8350cd54ba4082c35d7077b1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
I worked with Stefan here to update the section on running tests.
We are good now with it all.
(From yocto-docs rev: 806a89f1ddd3efc39d15d3f7e1a01e8fd69af7c1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created some sub-section structure to better organize this
section.
(From yocto-docs rev: 61b15f579c4c21378277051bb5905baa4e9741b5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added Information about setting up your own server. Paul
Eggleton provided the information.
(From yocto-docs rev: 655bba9b91283dac502658dd72d866a7af4eacce)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5159]
Edits to fix the occurrences of VIRTUAL-RUNTIME_initscripts = "".
I removed it from all places in the manuals except under
"Selecting an Initialization Manager". Note that it still
needed removed from "Using Systemd for the Main Image and
Using SysVinit for the Rescue Image".
Also, in the "Using Systemd Exclusively" section I made some
edits as suggested by Paul Eggleton's review.
(From yocto-docs rev: 28b2e3eba3acff17f165899a7f4a65c98263e201)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
Applied edits to the section in the dev-manual on running tests
on hardware.
Edited the TEST_TARGET and TEST_IMAGE variables.
(From yocto-docs rev: a26ba11c739aabab4009a944d9b622e2814c7fca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
This is the section that describes how to enable tests for
actual hardware.
(From yocto-docs rev: fd33b19e7fa32797ab2abd2b506b0d63209fbfc6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
The list of items that described what happens when you run
tests is really specific to qemu. Consequently, it is better
located in the section describing how to enable and get
set up for those tests.
(From yocto-docs rev: 1f0606f1c5c03c873a295819adcfb6fb51c196bd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
In the "Class Attributes" section I updated several items.
(From yocto-docs rev: 8f97671319c4751885e5ec89423a061dd45c6684)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
Removed the final bulleted item. Changed the wording on the
first to account for the manifest file.
(From yocto-docs rev: 50e7557032a0dbf4bc2144e9d4f9a4e1a1726d6d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
Removed the (second) note about rm_work builds, that bug
was fixed. (#5072)
(From yocto-docs rev: f1223a67caae17db1abfd6b7465bfc71d295ab7f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2444]
Several areas affected by the reference BSP "beagleboard"
being replaced by "beaglebone".
(From yocto-docs rev: 2f02b570e1ebcf0469871b67a029b65fa8b285f2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some feedback from Belen and Paul for the section in
light of the 1.6 release.
(From yocto-docs rev: 88bbc526446970c66642c2ae10ad3eba01f74eb3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed some links to the arichiver class. Also updated the example
to use the new ARCHIVER_MODE variable.
(From yocto-docs rev: 0774ddd2f83586c61f71f1b251fd559ccca45f50)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5159]
In the dev-manual, I located instances where a note about using
VIRTURAL-RUNTIME_initscripts = "" in the local.conf file would
be appropriate. Three areas updated.
In the ref-manual, I located the note in the systemd.bbclass
section and the variable descriptions for SYSTEM_AUTO_ENABLE,
SYSTEM_PACKAGES, and SYSTEMD_SERVICE.
(From yocto-docs rev: 57b0acf2f3f8159b635b42dcffa129f7d945eb81)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3686]
In the dev-manual, I created a new section called
"Making Images More Secure." The section explains in general
how to enable the security flags.
In the ref-manual, I updated the CFLAGS variable to point to the
new section.
(From yocto-docs rev: 3ed91a46eaf5c1fdf84369ea69951775d87a42da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I did not eliminate this variable but rather changed the description
to indicate that it has been deprecated and that the user should now
use a PR Service to do this stuff. There were several areas in the
YP manual set that used the variable in code. I just deleted those
lines from the code.
(From yocto-docs rev: 88a075e6306349e5f8c0d53b5288ef1e64956cd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hob no longer uses this layer so I removed the two instances in
the YP set where it appeared.
(From yocto-docs rev: 37e3f261bd61a96a2929a525f9896c39658d26f8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1562]
In the dev-manual, I created a new section called "Using the
Error Reporting Tool" that describes how to use this feature.
The text was based on information I received from Andreea Proca.
In the ref-manual, I added a new variable entry for ERR_REPORT_DIR
in the glossary and a new report-error class in the class chapter.
(From yocto-docs rev: 70a5538fefcc1b77958fe4b2f29be00354f4137a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided more information based on an IRC conversation that
Richard Purdies saw on #yocto.
Reported-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From yocto-docs rev: ec28d9f8f01a6e58ade2954e4e6f2ff1c11aa198)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark