u-boot doesn't really support building its tools for the target, as they are
built with HOSTCC compiler, which is also used to compile fixdep utility
that gets executed during the build. Since it might be beneficial to have a
target version of mkimage, let's hack it to build fixdep in a separate step.
(From OE-Core rev: a8692184d25cb7d8cb3b617e1dfb901fe1b0ca3d)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pci/config.h conflicts between 32-bit and 64-bit versions.
(From OE-Core rev: 21fb6bc1b030cab14e2c9b14607b34a62262ac06)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
An issue was found where when yocto is installed to a hard disk
from a live USB key, no matter what boot order was selected in
the BIOS menu, the grub menu of the USB key would always show
up. The issue was narrowed down to the way grub configuration
file gets embedded into the standalone bootx64.efi image.
The commit prepends ($cmdpath) to the search path for grub.cfg,
thus making sure the UEFI environment itself sets this to the
correct device path. This in-turn lets the grub.cfg of the boot
device to be loaded.
(From OE-Core rev: 5ce73b6055ac5a47906e2e661bc5163604f5cec9)
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Reviewed-by: Drew Moseley <drew_moseley@mentor.com>
Tested-by: Ravikiran Polepalli <Ravikiran_Polepalli@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should use ${PN} instead of 'acpid' for SYSTEMD_SERVICE, otherwise
we would have the 'installed-not-shipped' QA error if multilib is enabled
and we run `bitbake lib32-acpid'.
(From OE-Core rev: f8217853c69cf06c92b2f3885f7d49851213188f)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is needed with glibc 2.20 since _BSD_SOURCE
macro is gone
Khem fixed grub, but the grub-efi also needs it, the patch can't apply
to grub-efi, so made a new patch for it.
(From OE-Core rev: da120dec96f8f019c0fd50576fb7490689234257)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When 'sysvinit' and 'systemd' are both in DISTRO_FEATURES, we need
to prevent the init script from running via systemd.
This is because that the functionality has been implemented internally
in systemd.
(From OE-Core rev: 2236678e38b22b763de8322d90585cbf648a448c)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When 'sysvinit' and 'systemd' are both in DISTRO_FEATURES, we need
to prevent the init script from running via systemd.
This is because that the functionality of the init script has implemented
in systemd internally.
(From OE-Core rev: 8cfba07e24dae3d1837ccb5cb04e11f362519b0a)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For acpid needs to upgrade to work correctly with the new kernel.
The new version now uses autotools.
Also add systemd unit file.
(From OE-Core rev: 93805abedb5563a91886f330153b179033a29d11)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set INHIBIT_UPDATERCD_BBCLASS to "1" if 'sysvinit' is not in DISTRO_FEATURES.
The functionality of the init script 'fbsetup' is implemented internally in
systemd. So fbsetup is not installed if 'sysvinit' is in DISTRO_FEATURES.
That's why we need to set INHIBIT_UPDATERCD_BBCLASS to "1" to avoid
generation of update-rc.d related preinst/postinst scripts.
(From OE-Core rev: 640a2231597d74517527ebedb6fd141278ba06f4)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Only install 'keymap.sh' script if 'sysvinit' is in DISTRO_FEATURES.
This is because systemd internally provides a mechanism to implement
the functionality this script tries to implement. Please see
systemd-vconsole-setup.service for more details.
Also we set 'INHIBIT_UPDATERCD_BBCLASS' to "1" if 'sysvinit' is not
in DISTRO_FEATURES.
(From OE-Core rev: 5e0aa114241b956f61cf852e1f4ff41b576adff4)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As alsa-state inherits update-rc.d, the update-rc.d part inpostinst script
has already been handled in update-rc.d.bbclass.
Besides, we need to set INHIBIT_UPDATERCD_BBCLASS to "1" if 'sysvinit'
is not in DISTRO_FEATURES. This is because the init script is not installed
in such situation, adding update-rc.d part in the preinst/postinst scripts
just makes no sense.
(From OE-Core rev: 9b9da6667b606a56c89abc1b458f52dcca9774e9)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is needed with glibc 2.20 since _BSD_SOURCE
macro is gone
(From OE-Core rev: 12edeff6f23512ff88097f7ca4cf30ca3653d2eb)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoid building and packaging of sparc64 specific files in the x86 builds.
Fixes Bug:
[YOCTO #6427]
(From OE-Core rev: e9d1264a63f47965c2f10e18e532b117bbda26be)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bash script:
pm-utils/usr/lib64/pm-utils/sleep.d/98video-quirk-db-handler
(From OE-Core rev: 5a788c077ba2a0ab6bcc39f19d5e047410bc8355)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The /etc/init.d/fbsetup script doesn't have any effect in a systemd
image. Its purpose is to load the uvesafb kernel module at boot.
This functionality could be achieved by adding a configuration file
under /etc/modules-load.d/ directory which would be parsed by the
systemd-modules-load.service.
[YOCTO #4420]
(From OE-Core rev: 6d55a03d5cc8070d589c1fe7df74279208833383)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The /etc/init.d/alsa-state is totally useless for a systemd image.
Its functionality has been replaced by alsa-state.service files.
So if 'sysvinit' is not in DISTRO_FEATURES, installing this script doesn't
make any sense.
[YOCTO #4420]
(From OE-Core rev: 39759640c8abe51c8ded4c1ca6853b523a81c2f5)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
make: *** No rule to make target `/path/to/sysroot/4.9.0/include/stddef.h', needed by `crc32.o'. Stop.
make: *** Waiting for unfinished jobs....
ERROR: oe_runmake failed
This happens when upgrade gcc from 4.9.0 to 4.9.1, and the .depend isn't
regenerated when recompile, the content of it are:
[snip]
crc32.o: /path/to/sysroot/4.9.0/include/stddef.h
[snip]
And Makefile includes the .depend file if it exists, so there would be
errors when /path/to/sysroot/4.9.0/include/stddef.h doesn't exist.
Remove .*.d (a few .d files, its Makefile uses this wildcard) will fix
the problem.
(From OE-Core rev: b31dd7d1fbdd9165872a31c11c6627549609fcb3)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: d6eebc2ce20c4826ca37e9c4d5ea602875d07703)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A previously upstreamed patch has been applied. Bump the version to
incorporate this upstream update.
(From OE-Core rev: 72f3c0eb12fbad7318573c060b0f84993048fdcc)
Signed-off-by: Trevor Woerner <trevor.woerner@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix tftp stalls on loading files bigger than ~32k bug by cherry picking
a patch from grub upstream.
(From OE-Core rev: adac8c63a0eefd3ce118f8964b05a952e629da38)
Signed-off-by: Shan Hai <shan.hai@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a '\n' to the last line of the file to fix:
No newline at end of file
(From OE-Core rev: b3090263ba31702631270643c7a7d7af8f4d9234)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The on-target fw_printenv and fw_setenv needs configuration file
(fw_env.config) to be present in the target.
(From OE-Core rev: b4cd268cf7506a521d7800112cb775bd49e1ef09)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some boards are configured to read a script or environment file as part
of the u-boot boot sequence. This file, typically called 'uEnv.txt' or
'boot.scr', would be deployed alongside the u-boot binary. If a recipe
uses this u-boot.inc, such a file can be deployed by setting the optional
UBOOT_ENV parameter and including the file in the SRC_URI. For example:
SRC_URI_append_overo = "file://uEnv.txt"
UBOOT_ENV_overo = "uEnv"
(From OE-Core rev: 1506c40c93651356b9fe2f7184b5e26f99e22686)
Signed-off-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have this in recipes-bsp/grub/grub/40_custom:
[snip]
menuentry "Linux" {
set root=(hd0,1)
linux /vmlinuz root=__ROOTFS__ rw __CONSOLE__ __VIDEO_MODE__ __VGA_MODE__ quiet
}
[snip]
These lines are only for initrdscripts/files/init-install.sh, the side
effect is that it would make the target's grub-mkconfig doesn't work
well since the 40_custom will be installed to /etc/grub.d/40_custom, the
grub-mkconfig will run the 40_custom, and there will always be a
'menuentry "Linux"' menu in grub.cfg no matter it is valid or not, we
can do this in init-install.sh rather than grub to fix the problem,
which is also much simpler.
We have done the related work in init-install.sh, now we need remove our own
40_custom, and use grub's own 40_custom which is the right one.
(From OE-Core rev: 4fad24fef5552bd0e4a5ea0982573ba8e4523570)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch fixes a build warning which is promoted to an error via -Werror.
changes from v1:
* put "Upstream-Status" in patch itself, not in OE patch header
* fix commit wording
(From OE-Core rev: 4b41f4199d77144a629897173cff3d1efcfa85f9)
Signed-off-by: Trevor Woerner <trevor.woerner@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These recipes all use pkg-config in some way but were missing
dependencies on the tool, this patch adds them.
(From OE-Core rev: 2543b14dd0ca13005be0df027543431fc8e882ae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes a compatibility issue between v86d
and SeaBIOS VGA BIOS where the leal instruction
is not decoded properly. Read the
http://thread.gmane.org/gmane.comp.emulators.qemu/271806
thread for more details.
Patch taken from upstream.
(From OE-Core rev: 3e890dd00ed27cc30800caefa85827cb16da5a3a)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
However in u-boot no FILESPATH additions are currently needed so
instead it should be removed.
(From OE-Core rev: f8675ffa3f90d4e411a82d33ac8319f2c4c19235)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
x-load has been superseded by u-boot SPL for all cortex based TI SoCs.
For legacy boards meta-ti layer (that contains a maintained recipe)
should be used instead.
(From OE-Core rev: 3a675df3dd608b6e7250a3b0bfc9362d2f4e8aa9)
Signed-off-by: Petter Mabacker <petter@technux.se>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows us to remove the following uses of PRINC in meta-raspberrypi:
recipes-bsp/formfactor/formfactor_0.0.bbappend:
PRINC = "1"
recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend:
PRINC := "${@int(PRINC) + 5}"
(From OE-Core rev: cffbd11d915fe8a1399f23c97c4e2ecbdae4d00a)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The class itself currently does nothing. The idea is to mark all recipes that
make use of the texinfo utilities. In the future, this class could be used to
suppress the generation/formatting of documentation for performance,
explicitly track dependencies on these utilities, and eliminate Yocto's
current dependency on the host system's texinfo utilities.
(From OE-Core rev: e6fb2f9afe2ba6b676c46d1eb297ca9cc532d405)
Signed-off-by: Max Eliaser <max.eliaser@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The base_contains is kept as a compatibility method and we ought to
not use it in OE-Core so we can remove it from base metadata in
future.
(From OE-Core rev: d83b16dbf0862be387f84228710cb165c6d2b03b)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Resolves warnings of this kind in the OpenPLi layer:
WARNING: Use of PRINC * was detected in the recipe *
(From OE-Core rev: 5ffb38d6ace7faae839c8cac7327b5b1c2daae1a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous behavior defines a static set of modules that are built
into the grub efi executable. This works fine for a limited set of boot
environments namely the standard linux/initrd. This patch conditionally
assigns the same modules to a variable. This allows other meta layers
to add additional modules or completely override the defaults. The use
case driving this patch is the use of multiboot2 and related modules.
(From OE-Core rev: 597f8e0040ba3135220000b23767858c64b5c9b8)
Signed-off-by: Philip Tricca <flihp@twobit.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Debugedit errors out on bare metal binaries. The first version of this patch limited it to 64 bit targets, but the problem now shows up on 32 bit targets (minnowboard) as well.
(From OE-Core rev: f95c7611007ddda3fe36db90168c7d5de096f9cd)
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix beaglebone boot issue with large kernel images overwriting Device Tree.
See very detailed comments inside the patch.
The original patch is being reviewed upstream and is targeting mainline U-boot
version 2014.07. This is the adaptation of the patch for 2013.07 version we use
(From OE-Core rev: cd495307d233b81ebeb43198d13bbd4b3ad7407f)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the warning:
WARNING: QA Issue: gummiboot: Files/directories were installed but not shipped
/usr/lib
/usr/lib/gummiboot
/usr/lib/gummiboot/gummibootx64.efi
This is because it uses "/usr/lib" in gummibootlibdir, use ${libdir} to
fix it.
(From OE-Core rev: ee587332f2ac9d88d4a300732645b0e2f793ce5f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gummiboot depends on gnu-efi which had set:
COMPATIBLE_HOST = "(x86_64.*|i.86.*)-linux"
We also need set this for gummiboot, otherwise there would be build
failures for other non-x86 archs.
(From OE-Core rev: f1b23a32d0c823577cec532e3646c2f78e81ccda)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its LIBDIR in Makefile is:
LIBDIR = $(PREFIX)/lib
This is incorrect for 64 bit bsp, thus will cause build failures on gummiboot:
ld: cannot open linker script file /path/to/usr/lib64/elf_x86_64_efi.lds: No such file or directory
[YOCTO #6053]
(From OE-Core rev: a18e4bef5f284c5b940007e60c7be28128a94c44)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gummiboot is a simple UEFI boot manager.
Recipe imported from meta-intel with these changes:
- drop PR and update configure options
- upgraded to latest version
A couple of notes:
- If you wish you can install the gummiboot package on the target and
use 'gummiboot install' to add the payload to the ESP (see gummiboot --help,
just make sure the ESP partition has the boot flag on as gummiboot won't accept it
otherwise). However the point of this recipe is to be used by bootimg.bbclass and
generate images with gummiboot instead of grub-efi.
- You need a kernel which has CONFIG_EFI_STUB=y at least
- The default linux-yocto kernel config does not enable that, easiest way
to enable is to build with KERNEL_FEATURES_append = " cfg/efi-ext" in local.conf
(From OE-Core rev: 8f95d0598c31fff76e2a58fecb6c96197121a044)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Denys Dmytriyenko
Ming Liu
Arindam Nath
Chen Qi
Christopher Larson
Robert Yang
Khem Raj
Nitin A Kamble
Robert P. J. Day
Trevor Woerner
Shan Hai
Yue Tao
Maxin B. John
Ash Charles
Roy Li
Richard Purdie
Cristian Iorga
Ross Burton
Petter Mabäcker
Matthieu Crapet
Fathi Boudra
Paul Barker
Max Eliaser
Otavio Salvador
Mike Looijmans
Philip Tricca
Koen Kooi
Stefan Stanacar