qemu 0.13.0 can handle mmap_min_addr well, and patch to remove checks in
sanity.bbclass has already in oe-core mailinglist by Raj. This patch does
the same thing for qemu-script.
(From OE-Core rev: 48181023314ac09743b958b0035399797fe6cff9)
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to enable the new fetch2 implementation out of bitbake. Otherwise
we get various errors about SRCPV issues.
(From OE-Core rev: c8495be774a5cbf235a023cecf005b2763c98745)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously we mistakenly assumed that any argument which contained
*-image-* was the name of a rootfs image file. This allows nfs
directory paths to work correctly when they contain this substring.
This fixes [BUGID #743]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
On qemux86, export ac97 & es1370 emulated device to guest, and enable host oss&alsa
driver. So end user can get sound from qemux86 guest if the sound card
driver installed.
[BUGID #488] got fixed.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
tar < 1.24 has symlink issues where extracting a tar archive containing a symlink
to a directory where that symlink already exists will cause the symlink to be
dereferenced. If that target doesn't exist tar can fail with a permissions error.
Since we need to be able to do this for packages containing symlinks like
xorg-minimal-fonts and eglibc, we have to ensure a tar 1.25 is available early
in the build process.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable the fetcher to be able to unpack and SRPM. By default the system will
unpack the contents of the SRPM into the WORKDIR.
A new syntax "unpack=file" was developed for the SRC_URI, to allow for a
recipe to extract a specific file within an SRPM. An unpack operation will
then be executed on the extracted file.
In order to apply extracted patches (or unpack files not specified with
unpack), you must specify the path using WORKDIR, i.e.:
file://${WORKDIR}/mypatch.patch
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
As the BitBake script is the initial entry point for the system we need to
ensure it can run in as many places as possible, including systems which
aren't yest optimally configured for running Poky.
Remove some bashisms from the script so that it can run under Dash.
Pointers from: https://wiki.ubuntu.com/DashAsBinSh
Errors before this patch: http://pastie.org/1502136
Signed-off-by: Joshua Lock <josh@linux.intel.com>
This includes two method for build rpm repo:
1. create the metadata in rootfs_rpm
2. standalone binary for building the metadata
Not both of them are needed, generally #2 fits more for the purpose,
but #1 may have its use on rootfs creation using zypper.
Both share some problems and are subjected for future improvement:
1. the createrepo now builds metadata for the whole directory,
if there are more than one arch, it builds for all, which means
rootfs_rpm may run longer if more builds have been run.
2. createrepo builds metadata for stale rpms
Signed-off-by: Qing He <qing.he@intel.com>
Commit 94629f2521 removes the FROM header when
sending via sendmail to avoid sending mail as the original change committer (as
opposed to the local user). This resulted in mail going out without any FROM
header, which some mailing lists correct by adding the *bounce address as the
FROM.
Correct this by reading FROM from the environment, from a new -f argument, or
from the git user.name and user.email config settings, in that order of
preference. Also display the FROM that will be used prior to the send
confirmation.
This has no effect if the -g (send via git) argument is specified, other than
printing the git sendemail.from config setting.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Reported-by: Saul Wold <saul.wold@intel.com>
When using sendmail to send patches, patches would appear to be from the
original author as git adds a From: header in the generated patches. This patch
changes this behavior to match that of git-send-email, where the email From:
header is that of the current sender (according to sendmail) and a "From:
Original Author <email>" line is inserted into the body of the message.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Darren Hart and I discovered that when $CC is set (which
our meta-toolchain environment script sets up), the value
leaks into the use of this script. Unsetting $TO as well
just to be thorough.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
psuedo needs a full path to its pid file, so convert
relative extract-dir paths to full ones.
The symptom of this bug is receiving the following error:
pseudo: Couldn't open relative/path/to/var/pseudo/pseudo.pid: No such file or directory
This fixes [BUGID #670]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
To reduce the time on sanity testing, we remove variable SHARE_IMAGE and use
a new variable TEST_SERIALIZE in local.conf. It is by default set to 1. Poky
will copy and boot the to-be tested image for only once. It will not remove
or kill the image and test cases will be serialized executed against the same
image. If it is set to 0, image is always be copied for each cases, which takes
much time. I had a experiment that latest qemuppc sato only takes 7 minutes to
finish 9 sanity test cases, which takes more than 20 minutes before.
I also removed sanity case "boot" from sato/sdk/lsb because the other cases for
these targets already cover the check point of "boot".
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
Fixes [BUGID #595]
Because of the QEMU booting slowness issue(see bug #646 and #618), autobuilder
may suffer a timeout issue when running sanity test. We introduce variable
SHARE_IMAGE here to fix the issue. It is by default set to 1. Poky will copy
latest built-out image and keep using it in sanity testing. If it is set to 0,
latest built-out image will be copied and tested for each case, which will take
much time.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
bbvars.py will compare recipes in meta directories with documentation files
and report on variables that don't appear to be documented. It reports the
number of times a variable is used as well as any doctags present in the
documentation config file.
The output of this is intended to aid in determining where documentation may
be lacking, but it is not perfect, and does generate some false positives. An
experienced eye and careful attention to count and doctag should be applied to
the results.
$ ./bbvars.py -d ../../documentation/poky-ref-manual/poky-ref-manual.html -m ../../meta -t ../../meta/conf/documentation.conf -T | head -n 10
Found 1413 undocumented bb variables (out of 1578):
VARIABLE COUNT DOCTAG
===================================================
BUILD_ARCH 4 The name of the building architecture. E.g. i686.
BUILD_CC_ARCH 2 FIXME
BUILD_PREFIX 4 FIXME
BUILD_SYS 13 FIXME
BUILD_VENDOR 2 FIXME
CACHE 1 The directory holding the cache of the metadata.
COMPATIBLE_HOST 19 A regular expression which matches the HOST_SYS names supported by the package/file. Failure to match will cause the file to be skipped by the parser.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no connman in LSB image. So we need to remove connman test from it.
And when we check if ip address fetched by Test_Fetch_Target_IP is valid,
we should use "==" operator for string comparison.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
Add one case for connman sanity test. We check if connmand is running
in background after booting and if there is always one connmand process
running even connmand is executed by several times.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
Previously, any active command containing the word "qemu" including
in the command path would trigger a "success" result for detecting
the qemu process. This change fixes the check to search for commands
starting with "qemu" and ignores pathnames.
It also shortens the timeout for the qemu process to appear to 10
seconds. If it doesn't appear in that time there is always a problem.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
The recent environment changes mean TOPDIR/BUILDDIR need to be exported
specifcially to the enviromnent so the qemu scripts can find the correct
build directory.
Without this, qemu can fail to run.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Fixes [BUGID #612, #611]
Add check for existence of image to be tested in qemuimage-testlib.
This ensures that sanity test returns failure immediatly when there is
no image found. And also add check for the correctness of ip address.
If the ip address returned by function Test_Fetch_Target_IP is 0, it
means qemu starts up failed and no valid ip address found.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
Some users find it easier to use their git sendmail setup over a local
MTA to deliver mail with the send-pull-request script. If you would
like to do this, please read the git-send-email man page and set
the relevant entries in your git config. In particular, be sure to
set sendemail.from to avoid being asked each time.
Reported-by: Khem Raj <raj.khem@gmail.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Some users experience problems viewing the pull requests as a sequential
mail series due to the script using the git commit date for the patches
and today's date for the cover letter.
Address this by renaming the email Date: header to Old-Date: and adding
a new Date: header with a current timestamp.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Reported-by: Gary Thomas <gary@mlbassoc.com>
Cc: Josh Lock <josh@linux.intel.com>
Update the script so that it will work in more then just bash. If bash
is not used, it will assume the PWD is the Poky location. (This is because
BASH_SOURCE is a bash-ism, and equivalent functionality is not available in
other shells).
This has been verified with dash (see comment in the code), ksh, zsh and
of course bash.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Break up the scripts/poky-env-internal into two parts:
1) Chunk that is sourced and sets up the environment
2) Chunk that is executed and configures the build directory
OEROOT configuration was moved into the initial poky-init-build-env script.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
In order to support qemu user's flexibility requirement, we add extra
parameter options, user can add extra params such as "<-m 256>"
in poky-qemu script command.
Signed-off-by: Liping ke <liping.ke@intel.com>
If someone has changed TMPDIR in local.conf to a non-standard location, the
poky-qemu script currently doesn't handle this and assumes if BUILDDIR is set,
$BUILDDIR/tmp will exist.
Its simple to check if this exists and if not, to ask bitbake where the
directory is so this patch changes the code to do that.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
If we make a test with lsb test suite, then we must creat a large image with lsb test suite.
three function in this script:
1 download lsb test suite
2 creat a block file with 3G
3 install file system of poky-image-lsb, modules of driver and lsb test suite
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
User need build kvm module for native kernel and install them by "modprobe
kvm_intel". Then add "kvm" option to poky-qemu to enable it.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
* No longer assume SDK toolchains are installed in /opt/poky
* [BUGFIX #568] where specifying paths to both the kernel and fs
image caused an error due to POKY_NATIVE_SYSROOT never being
set, triggering failure of poky-qemu-ifup/ifdown
* Cosmetic improvements to usage() functions by using basename
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
By using the POKYCONF variable, a meta layer can provide the basic setup for files to
be used during a build. This is similar to the default values stored in the main meta
tree, .../meta/conf/local.conf.sample, etc
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
These variables are not on any bitbake environment whitelist so will never make it into
the environment. This is legacy code which is not required any more so remove it.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
OEROOT isn't used outside the init script so stop exporting it into the environment
where it can "corrupt" sstate packages.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
This fixes two bugs with poky-qemu when it is run from a
standalone meta-toolchain setup.
[BUGFIX #535] and [BUGFIX #536]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
scp test is to check if file copying via network work or not in target.
shutdown test is to check if target can be poweroff with qemu process off.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
send-pull-request facilitates sending pull requests generated by
create-pull-request. The primary role of this script is to harvest email
addresses from the patches and send them out. A working installation of sendmail
(exim, postfix, msmtp, etc.) is required to use this script.
You can explicitly specify To addresses with the -t option. As this can be
tedious, the -a option will scan all the patches for To, CC, and *-by lines and
the collected addresses to the To and CC headers for each patch.
This script uses an identical recipients list for every patch, including the
cover letter. This is by design. Existing tools will auto-generate the CC header
for individual patches, but since they don't apply it to the other patches, the
recipients can lack the necessary context to provide a meaningful review. This
is especially true of the cover letter.
The pull directory generated by the create-pull-request script is specified
using the -p option.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Nitin A Kamble <nitin.a.kamble@intel.com>
CC: Richard Purdie <rpurdie@linux.intel.com>
CC: Saul Wold <saul.wold@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
The previous create-pull-request only generated a cover letter. When used to
send to the list, it did not include the patches, which made it difficult
to perform peer review. A pull request without patches is typically only sent
by a maintainer. As we are not all maintainers, we need a means to easily
submit patches for review.
As we are accustomed to making pull requests, this script retains a
git-pull-style cover letter, while sending the relevant patches as responses
to the pull. This will provide the necessary context for peer review, and still
allow people to collapse threads and see no more mail than they were previously.
This version retains the relative_to, commit_id, and contrib_branch arguments
from the original, along with their default values. It adds several more,
resulting in a highly flexible tool.
The script creates a pull directory (pull-$$ by default, configurable via the -o
option) and populates it with a git-format-patch generated patch series and
cover letter. The cover letter is modified to include the git and http pull URLs
and branch name, as well as a basic signature from the author pulled from git's
user.name and user.email config. git-format-patch provides the shortlog and
diffstat of the series.
Breaking a bit from the original, this script maintains the [PATCH] subject
prefix in the cover letter (as opposed to [GIT PULL]. This is better suited to
the majority of developers (who are not maintainers). This prefix is
configurable with the -p option, allowing you to create an [RFC PATCH]
prefix, for example.
By default, the generated cover letter with contain "*** SUBJECT HERE ***" and
"*** BLURB HERE ***" tokens which you should replace with something
appropriate prior to sending the messages.
When developing multiple versions of a patch series, it can save time to
maintain a message.txt file, rather than having to retype the message body of
the cover letter every time. The -m option allows you to specify a message file
and replace the "*** BLURB HERE ***" token of the cover letter with the contents
of the message file.
Finally, the -s option will replace the "*** SUBJECT HERE ***" token in the cover
letter with the specified subject.
The generated patches are suitable for sending via sendmail.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Nitin A Kamble <nitin.a.kamble@intel.com>
CC: Richard Purdie <rpurdie@linux.intel.com>
CC: Saul Wold <saul.wold@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
The patches to follow completely rewrite the existing create-pull-request.
Rather than have an initial diff of the two files (which are not at all
similar) remove the original, and then create the new one.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Nitin A Kamble <nitin.a.kamble@intel.com>
CC: Richard Purdie <rpurdie@linux.intel.com>
CC: Saul Wold <saul.wold@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
Fixes [BUGID #394]
Now that the qemu/mti mips kernel branches have been fixed
for wacom USB interaction, we can re-nable the standard set
of qemu UI options for qemumips.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Add a test case for error log check with command dmesg in target. The
case introduces a new folder in target, "/opt/test", which holds test
scripts running in target.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
In scenarios where the POKY_NATIVE_SYSROOT env variable hasn't been
set up, bug #427 can still be triggered. This fixes it by running
setup_tmpdir(). This fixes [BUGID #427].
Also, the qemu tap dev lock directory needs to be chmod 777 so that
multiple users can create and delete lock files.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
This fixes [BUGID #433]
Also set a sane default for the ifconfig command, which simplifies
our autobuilder sanity test setup.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
There does not appear to be a universal lockfile utility that
meets our needs. For example:
* 'lockfile' is part of the procmail pacakge in Ubuntu, a
requirement we don't want to impose on our users
* lockfile-[create|remove] from the Ubuntu lockfile-progs
package does not appear to be available in Fedora/openSUSE
So, the most portable way to do this is just to implement it
in bash. The likelihood of race conditions is minimal for
what we need this for.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
This allows the user to specify a rootfs type
(e.g, poky-image-sato) without typing out the full filename
and path (assuming we can infer a valid MACHINE and FSTYPE).
This fixes [BUGID #415]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Using poky-qemu with our new tap networking and/or unfs support
required too many additional build steps. This updates the
meta-ide-support dependencies so all features are built and
available to use.
Specifically, this adds psuedo-native, qemu-helper-native, and
unfs-server-native to the dependency chain for meta-ide-support.
This fixes [BUGID #392]
Also add poky-gen-tapdevs and remove runqemu-nfs from the
qemu-helper-native recipe, and update some qemu control script
error messages to suggest building meta-ide-support.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
This merges the functionality of the runqemu script into poky-qemu.
It also removes the requirement to order command line args to poky-qemu
in any particular order.
This fixes a slew of runqemu-related bugs by making the runqemu script
obsolete (and fixing the issues in the new poky-qemu), including
[BUGID #294] [BUGID #295] [BUGID #371] and [BUGID #324].
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
These changes allow multiple instances of the userspace NFS server
to run, when brought up by consecutive instances of the poky-qemu
control script.
This fixes [BUGID #393]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
This script can be used to create and configure a 'bank' of tap
interfaces that can be used by the poky-qemu script.
It is useful in locked-down enterprise environments where developers
do not have sudo access, but need to be able to run QEMU with
networking. A sysadmin would then use this script to bring up a
number of tap interfaces for the user to make use of.
This fixes [BUGID #391]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
The 'lockfile' utility originally used comes from the procmail
package, which users shouldn't have to install. This uses the
more general lockfile-progs utilities to acheive the same end.
This fixes [BUGID #389]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
This is the first phase of some refactoring the poky-qemu control
scripts are getting. This integrates userspace nfsroot support into
poky-qemu, making runqemu-nfs obsolete.
This fixes [BUGID #295]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
This fixes [BUGID #232], requiring root privileges to run these scripts
and giving an error prompt when that requirement is not met.
The tunctl uid fallback code has also been removed, as we can rely on
the specific version of tunctl run from the native sysroot.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
We already export http,ftp,https proxy environment variables. Some environments,
GNOME for instance, place the socks proxy in ALL_PROXY and all_proxy. Export it
as well.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Fixes [BUGID #99]
The mouse, usb and cursor devices don't work for the
qemumips machine. There's no easy way to 'undo' the
defaults, or dynamically remove them, so we simply
don't use the default UI options for this machine type.
Mouse and pointer are provided via ps/2 and not via
the usb and wacom tablet driver.
Signed-off-by: Richard Griffiths <rgriffit@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
This reverts commit 138df217ef.
We still need the vm_mmap_min_addr set to 0 to run locale generation for
qemu-arm
Signed-off-by: Joshua Lock <josh@linux.intel.com>
The output of:
$ source poky-init-build-env
would wrap on 80 character terminals, making the output difficult to read.
Replace the somewhat clumsy repeated usage of "echo" with bash here documents,
limiting line length to 80 characters. The use of here documents simplifies this
by removing any leading commands or indentation from the output being generated.
A bash'ism should be acceptable here as poky-init-build-env already aborts if
the shell is not bash.
Signed-off-by: Darren Hart <darren@dvhart.com>
With "no_proxy" exported to bitbake, both internal and externel file mirror can
be used. "https_proxy" enable fetching "https://" file through proxy.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Rather than trying to determine things through guess-work use the newly
exported variables to determine where the native binaries reside and
whether we are running in a build directory or not.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
The unfs server requires either rpcbind or portmap to be installed and
running to start so check for their presence in the script.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
siteinfo: Use configuration caches when available
Generate cached configuration data for autoconf for the package
based on a list of header, types, and functions to eliminate the
need for all subesequent package builds to do the actual tests
via the cross compiler and sysroot. The cache files are
stored in the sysroot in ${STAGING_DATADIR}/${TARGET_SYS}_config_site.d.
Siteinfo appends any files it finds in that directory to the normal
CONFIG_SITE. All of the cache values set the variables only if not
already set so they may be overridden by any of the normal site files.
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
poky-qemu-internal will set up a tap lockfile when creating tap device. The lockfile
will be released when a TERM signal is received. In previous code, function
Test_Kill_Qemu uses pkill to kill all process named "qemu". This may cause lockfile
release function not work in poky-qemu-internal. Then poky-qemu-internal will be
hang when user start QEMU the second time. To prevent the issue, the new function
Test_Kill_Qemu kills all child pid with a given parent process ID.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
Different test cases are needed for different targets. A folder "scenario"
is created under scripts/qemuimage-tests to hold scenario files for different
targets.
Single case running is supported now. User can run single case together with
a whole test suite by setting variable TEST_SCEN in local.conf.
By default test cases in sanity suite will be ran. If you want to run other
test suite or specific test case(e.g. bat or boot test case under sanity suite),
list them like following.
TEST_SCEN = "sanity bat sanity:boot"
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
We need some libraries installed to run the built qemu, check for their
existence before trying to run the program. Fixes [BUGID #201]
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Without the fix, when the commandline is printed with the "echo" command,
it loses the quotes and this confuses people.
Thanks Richard for pointing this out.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
The poky-qemu-ifup script now requires a path to the native
sysroot as an argument. This fixes a case where the argument
was missing.
Also, set up NATIVE_SYSROOT_DIR when running runqemu.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
This script automates the booting of QEMU using an nfsroot exported
by our userspace NFS tools. The rootfs should be created using
poky-extract-sdk.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
This script automates the exporting of a root filesystem (created
with the poky-extract-sdk utility) using pseudo and the native
userspace NFS server. That filesystem can then be booted using
nfsroot with either QEMU or the target hardware using one of our
kernels.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
This script automates the creation of a rootfs area using pseudo so
it can be used by a QEMU nfsroot boot.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
This patch makes poky-qemu-internal check for the existence of an
available preconfigured tap device before running poky-qemu-ifup to
make a new one.
Locking is handled with a lockfile in /tmp/qemu-tap-locks/. This uses
the lockfile utility, so that needs to be present on the host. On
exit, this script removes the lock file so that the tap device may be
reused.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
The image specification can now be in the form nfs-server:directory.
This makes it possible to nfs-boot from servers other than the host.
poky-qemu-internal will properly construct the kernel command line
given such a specification.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
poky-qemu-ifup can run standalone by root in order to configure a bank
of tap devices for later qemu use.
These devices will, if possible, be owned by a specified group to
which qemu users must belong.
If the kernel is too old to support TUNSETGROUP, then it falls back to
setting the tap device to be owned by a particular user, and that user
will be the only one allowed to use it.
Also overall usability improvements to the scripts, usage() help, etc.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Various poky scripts make use of binaries from the native sysroot.
This helper script can be used to reduce code duplication, and sets
up some environment variables you can use to identify and obtain
the correct filesystem path to the native sysroot.
It works for both in-tree Poky setups as well as toolchain
installations.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
This patch bases the tap IP address on the device number, providing
each device with its own IP address.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
With this patch, a persistent TAP device is set up by poky-qemu-ifup,
which is now run before qemu. The qemu command line now uses the
device that was constructed (rather than the hard-coded tap0) and it
is told not to run any networking scripts.
When qemu shuts down, poky-qemu-ifdown removes the TAP device.
sudo use - sudo is used to run poky-qemu-ifup. sudo is no longer used
to run qemu, as qemu no longer needs privileges to set up networking.
poky-qemu-ifdown is run without privileges, as you can remove a TAP
device which you own.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Currently rm -fr build breaks things badly but will work if we move the sample
configuration files to meta/conf - this patch does so.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Re implement the rootfs generation using rpm5. This also gets rid of the
need for yum, and handles all dep resolving internal to the script itself.
The new file scripts/rootfs_rpm-extract-postinst.awk comes from the original
yum integration work. It has been unchanged, but since yum is no longer used
we needed to move the script somewhere else.
Signed-off-by: Mark Hatle <mhatle@windriver.com>
We don't want Bitbake to clean OEROOT from the environment as users may have
old layer configurations which require it set.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Since scripts is now in PATH thanks to the layer functionality there is
no longer any need to have this recipe full of special cases, the scripts
can just be placed there.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Many users have an existing build confifured using OEROOT, re-enable exporting
of this variable to unbreak their builds.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
You need to first set up the build directory by sourcing the poky build script,
after that builds can be run in that directory so long as bitbake is in $PATH
removing the need to source the init script for each build.
i.e:
$ . poky-init-build-env ~/my-build
$ bitbake some-image
<<later, in a different shell>>
$ cd ~/my-build
$ export PATH=/path/to/bitbake/bin:$PATH
$ bitbake an-image
This patch also removes use of OEROOT in recipes, etc.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Automation test is disabled by default. User need set TESTCLASS
to qemu in conf/local.conf and run bitbake command "bitbake
poky-image-xxx" or "bitbake poky-image-xxx -c qemuimagetest" to
trigger it. Currently only the sanity test with two testcases are
added.
To run the test, user need prepare a testing environment:
1) "expect" should be installed on system
2) NOPASSWD should be set for user to run bitbake
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
For mips, the malta platform emulates a cirrus chipset. With the udpated
2.6.34 kernel options, we can now enable framebuffer boot for
the qemumips platform.
We need to pass a valid cpu (603e) and do a -nographic boot to
make it all the way to a prompt so graphics is disabled for now
for ppc.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
With this change the create_pull_request will be able to generate pull
requests to master as well as distro/master branch.
Some documentation is added in the Usage messange of the script.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Added usb tablet options to poky-qemu-internal script, and adjusted the
xorg.conf script for x86 to use VGA screen and tablet input device
Signed-off-by: Saul Wold <saul.wold@intel.com>
QEMU 0.12.x is relocatable so we no longer need these tests, which is good
because it doesn't work reliably with modern kernels.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
This is the 1st version of create-pull-request script.
Using specified local commit-id or branch-name it
generates a short description of the changes;
and using poky-contrib branch-name it generates the
URL where these changes are already pushed
and are available for review and git-pull.
I prepared this script as per the input from Richard Purdie.
Signed-Off-By: Nitin A Kamble <nitin.a.kamble@intel.com>
Currently the script will scan all packages in the pstage directory and log
packages which contain destinations outside of the native sysroot.
The script currently ignores pkgdata, stamps and deploy but does trigger the
work dir for packages with a package-split file, this may well be a false
positive.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Fix typo in help message (we default to ext3 not ext2 now)
and a typo whereby moblin-image-sdk wouldn't be autofound.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
It's pretty useful to be able to define BB_NUMBER_THREADS on the cli when
executing bitbake. Add it to the extra whitelist defined in the
poky-env-internal script.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
We want to have a more generic platform definition.
The netbook machine one currently supports the eee901 and the aspire one.
We also moved the machine and netbook image definitions to meta-moblin.
* Try harder to find ifconfig
* Error out if the environment isn't correct
* Tell the user we're running sudo
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@989 311d38ba-8fff-0310-9ca6-ca027cbcb966