Added the buildhistory directory. Added the deploy/sdk directory.
Beefed up the tmp and build directory descriptions.
(From yocto-docs rev: 3ac9435a48b6da730e640b204ba3f41daebc39e8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided better link to Wayland and a new link to Weston.
(From yocto-docs rev: 95086f7d4bf8ce3b3c33c2863435f2896c73cc3f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor changes as a result of a read-through of the section.
(From yocto-docs rev: 4139f67d3615d6fe3eca79356c92937a314b200e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some items found reading through the section. Needed some
cross-referencing to better targets based on newer information.
The text was quite dated in this section.
(From yocto-docs rev: eba809fd709d801bec50a820d7e6a5a79707dde6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor fixes throughout.
(From yocto-docs rev: d44ae0da21d84acbe1556824e228c7ab0af1ba2c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Along with some minor things I did the following:
* Added a brief explanation and reference to the reporting error
tool. It seemed like a good chapter to include it. I put it
in the debugging section.
* I added a pointer to the BitBake manual right at the top of a
section that had many usages of the bitbake command.
(From yocto-docs rev: 9317433bc715e9fdac2fc629ed659ac926d67531)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During the read-through, I noticed that I did not have a complete
list of YP manuals in the "Introduction" section. I also added
the new BitBake manual to the list of external manuals.
(From yocto-docs rev: 46ae0400d807c733bc0c32b07b4b59cc8d6d2618)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This had been negleted and many new sections were not on the list.
It is all up to date now.
(From yocto-docs rev: 3291491ec41146a1dfa0cb2f1387fba85b1c7d24)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This information now exists in the separate BitBake User Manual.
To remove this information, the ref-bitbake.xml file was taken
out of the ref-manual.xml build, an overview bullet describing
BitBake chapter was removed from the "Introduction" chapter,
and one cross-reference link to a sub-section of the old BitBake
chapter had to be re-routed into the similar section of the BitBake
Manaul.
(From yocto-docs rev: 3828291699b5997c28a782600c9d472b8449ecd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made sure that the first occurrence of each "BitBake" term linked
into the "BitBake" term as defined in the dev-manual.
(From yocto-docs rev: 83e6e43d13cf5447b8ef65836d532abbb1f8b15e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1562]
In the dev-manual, I created a new section called "Using the
Error Reporting Tool" that describes how to use this feature.
The text was based on information I received from Andreea Proca.
In the ref-manual, I added a new variable entry for ERR_REPORT_DIR
in the glossary and a new report-error class in the class chapter.
(From yocto-docs rev: 70a5538fefcc1b77958fe4b2f29be00354f4137a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5442]
Updated the TMPDIR variable to call out the scenario where a user
might want to separtely set TMPDIR to a local drive and thus be
able to have the Build Directory on NFS.
Updated the "Build Directory" term with a note indicating that by
default, TMPDIR is inside the Build Directory and thus cannot be
on NFS. However, the user is able to by-pass that per setting
TMPDIR separately outside of the Build Directory.
(From yocto-docs rev: a5a308c512a3f4285bce16f17974dbf6b67432b2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5766]
In the ref-manual, I added "Eclipse" use in the title for the
"Graphics Support" packages because the "xterm" package is required
for graphics support across all distributions.
In the dev-manual, I specifically called out the need for "xterm"
as a host package at the top of the section describing workflow
with Eclipse. I also updated the cross-reference links to the
host package and Linux distro requirements to point into the
ref-manual, which is more comprehensive, than into the QS.
(From yocto-docs rev: d3405be506fcb113f01d4fcba4631db80a1ed5dc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4601]
Added a couple notes saying that you need to be in matching
branches for meta-intel and poky.
(From yocto-docs rev: 02bd63829b1d98f21183a10707753e9767bfe68e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4866]
Updated the main area where it talks about needing the right
versions of Git, tar, and Python. You can get this set up using a
couple methods. I documented both.
The changes in the FAQ and in the QS are basically notes that point
to that section for more information.
(From yocto-docs rev: 1b64c7c271303ecf10ec85c8a2cd5a0d909f1151)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5442]
Updated the description to note that TMPDIR cannot be on NFS
since it has issues that mess up the build process.
(From yocto-docs rev: a2fa1c8a23ee7a26fa362e089d84747b4cb4618b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided more information based on an IRC conversation that
Richard Purdies saw on #yocto.
Reported-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From yocto-docs rev: ec28d9f8f01a6e58ade2954e4e6f2ff1c11aa198)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This command was wrong.
(From yocto-docs rev: bea7cae5651163e4121b0f5dedeb7d3c6de40705)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The command said 'bitbake image....' where it would be better
to say 'bitbake <image>...'
(From yocto-docs rev: be90d647a298c88f6a1a69c66a0795dcdb5cb56b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2528]
The defaults for BB_NUMBER_THREADS and PARALLEL_MAKE are now
automatically set to the build host's number of processor cores.
I updated the "Building and Image" section in the Quick Start
to state that. I also updated the PARALLEL_MAKE variable.
(From yocto-docs rev: 2069c96d2410605c089da4eede2c7b4f9a7b704a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the adt-manual in the "Optionally Building a Toolchain Installer"
setion, I added some basic advantage information for building a
toolchain installer using bitbake image -c populate_sdk.
In the ref-manual, I added cross-referencing to this basic information
in several strategic areas: "SDK Generation", the populate_sdk class
reference section, the populate_sdk_* class reference section, and the
"Cross-Development Toolchain Generation" sections.
Finally, I also put in documentation for a new class called
autotools-brokensep.
(From yocto-docs rev: cde7dd2fbd7bdc0d71dc678ee7a5422459654287)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2424]
Some imgage names were cleaned up to have more meaningful names.
These doc changes here take care of changing "core-image-basic"
to "core-image-full-cmdline".
Five instances changed.
(From yocto-docs rev: b758f9645e66867b5728da1dd989bae70a216fcc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5410]
I updated the figure that shows what do_rootfs does to create
the image. The new addition is the creation of the .manifest file
that lists out package information in the image. Supporting text
was also added in the section.
The updated figure was needed in both the ref-manual and
mega-manual figures folders.
Also, part of the fix included a new variable description for the
IMAGE_MANIFEST variable.
(From yocto-docs rev: 770448e0e8ce2e2c517ced5e71f5a916fefe5cf2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5406]
In the "Making Sure the Packaging is Done" section, I added the
Summary parameter the laundry list of parameters for the
do_split_packages list in the section. Paul Eggleton reviewed
the change and approved it.
(From yocto-docs rev: 4c4f60ee611921d9f0f835a081b449565382ab90)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton noted that the output to bitbake <target> -c listtasks
was documented as going to a specific file only when in fact it
also goes to the console. I updated the section to include that
fact.
(From yocto-docs rev: 0ed7da3f0fc21412c1045889f241a3d86587d16f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A few minor edits.
(From yocto-docs rev: 6051ad964bda3ba78ea3a75199fda87133cc08fd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits.
(From yocto-docs rev: 551127f3afa65f36bf9baf21d0ca3e53a2fbb3c1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits. Needed to add a few cross-reference links.
(From yocto-docs rev: 47d7c408984a552a6c5d25ac880b50634c576cc5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits here.
(From yocto-docs rev: f2d8dfa11af30699f912853814e3dce37b335d34)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits.
(From yocto-docs rev: 29b999f259bc9c87ad0b2e3c1d54f5473b66edbc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the way I referenced the read-only-rootfs feature. Since
it is something on the right side of a variable equation, I decided
to not render it in a Courier font. I have quoted it.
(From yocto-docs rev: 90804e71e43cddd3ac7c194a677acaab0c866ed6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mainly changed the way I referred to Systemd and SysVinit. I was
rendering them in a courier font, which was not correct.
(From yocto-docs rev: 179ae65ffdfcf59c36e4a3d315855d50722ad890)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I try not to use <class>.bbclass when referencing a class in
text unless specifically noting the .class file itself.
(From yocto-docs rev: 92c010a198b5c2e1da2ad979e6ca41cb7cd96e7e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed a reference to a class to conform to how it is done in the
books.
(From yocto-docs rev: df925b87e4b4962aca913677d8ea01b60b8f99dc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mostly minor edits.
(From yocto-docs rev: 4076cf666a3161c5b816bdc56ff0a4edca5ada32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits. Created some links at the top for organizational
purposes. Clarified what the linux yocto Git repositories are.
(From yocto-docs rev: adbb8ecb0bce5775153d43bec4b70b2439bc8846)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Eliminated the redundant [required] and [optional] side-notes
for some variables.
Minor fix to re-word use of "append files".
(From yocto-docs rev: 9db7059c9b95871cf876d6d75f8377de943bff85)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a bit about the layer creation in the patching the kernel
section. The example does it by hand and now you could obviously
use the yocto-layer create script. I made a note of saying the
example does it by hand.
Also, in the menuconfig example. I updated the kernel version from
3.4 to 3.14. It was very old.
(From yocto-docs rev: 2696d4e45bccbb910c3d721e3f1d46d48309ee6d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to "Adding a New Machine" and "Working With Libraries".
Minor corrections.
I did do a significant rewrite of the first two sections of the
"Adding a New Machine" section as it was very poor.
(From yocto-docs rev: 0a030e44f0f1bf2bb204f24b63b4ddfc0cde8252)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits.
(From yocto-docs rev: 8e0de3f767af4b2ca182d9f321bd3c8286773913)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor items fixed.
(From yocto-docs rev: a57772d157a3340d6ae707990d6076e344e15c75)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor edits applied.
(From yocto-docs rev: 1897997ad3ef3ada76de77c7fb886fb624dcdfdb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several items taken care of here. Of note are the retiring
of three BSPs (Chief River, N450, and sys9* stuff).
Also of note is that Kepler recommended version is now 4.3.2 and
not 4.3. The interface changed a bit as well in the section
for installing that stuff.
(From yocto-docs rev: 61bf82c1e68156d32a81e4c76dbb29db14665ffb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark