Clearly a logic/indentation error - we should only try and load the recipe
should the file-chooser return OK.
Fixes [YOCTO #1668]
(Bitbake rev: db59297aa1861614ffaea4295b9b054baa8a12b9)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes the internal dirtiness tracking such that if the Save menu item
is selected after loading a recipe the existing file is updated rather than
the user being prompted for the path to create a recipe at.
(Bitbake rev: 00fc1d7249b5e217cc7c36ac71b63ddad1c5b769)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After the reparse we were setting the model to reflect the values before
the reparse was triggered but clearing the internal variables used to test
whether these values are set, leading to the UI erroneously reporting that
selections had not been made.
(Bitbake rev: 656eafe0f2c9ec7730d33e15705b8c720f787c49)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Once an image build has been performed the selected_image variable would
prevent the package only build choice being triggered - by setting the
variable to None on reset we are able to perform package only builds after
an image build.
(Bitbake rev: 705156e2812afb288632f01416fcbbf9add26bee)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The different code paths for package vs image builds have lead to some bit
rot in the package only build and an incompatability between package only
builds and the build again mechanism.
This patch unifies the code paths and fixes build again for package only
builds.
Fixes [YOCTO #1480]
(Bitbake rev: ab6c63f35739c30df0e8a9d0f1ae982b96e538ed)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the user saves their recipe based on an existing image type, loads it
in a newly run hob instance and clicks bake they should not be asked about
building packages vs an empty image up.
Partially addresses [YOCTO #1468]
(Bitbake rev: f4be83aae77a713e2b5a2d094651639b6e641031)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It doesn't matter if we can't remove the temprorary file, for some reason,
so catch the exception and ignore it.
Partially addresses [YOCTO #1468]
(Bitbake rev: 4394e38b038e1bc9845adf01d73363157d98c96d)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some internal lists were not being cleared, resulting in incorrect
program flow on the second build, causing a structure to be accessed
incorrectly which resulted in a segfault.
Fixes [YOCTO #1332]
(Bitbake rev: 71ac7fda51ed80e9ef6d1a3bca653683893e4770)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you don't clear out files_to_clean after the files get deleted and
then you run a second build, it will try to delete the files from the
first build and you will get a "No such file or directory" error.
(Bitbake rev: 069d85cde01d14f8da31ad5cbd843a4d99628d42)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's felt that the stability of package deselection is not sufficient for
the upcoming release and thus package removal should be disabled.
I'd actually like to see this patch, or its effects, reverted as soon as
the release bits have been frozen so that this issue can continue to be
worked on.
(Bitbake rev: 73b6ff4654d10baae59d83e8568d58d989e99dd7)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
hob requires pre and post configuration files to store configuration values
in, whilst this should (and will) be fixed long-term for so long as we
require these files we should alert the user should they run without them.
Fixes [YOCTO #1383]
(Bitbake rev: bb3e9113074ea1254aa03a247a1a1070682df9c8)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If no value is set for DISTRO the defaultsetup policy is used, reflect this
in the UI by having defaultsetup selected in the Distribution combo when no
other DISTRO is set.
(Bitbake rev: 126267c545ede65042959d134ea75c0345577747)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to set various variables *before* parse begins, the simplest way
to ensure this is to use a pre configuration file for the relevant
configuration entries.
This series adapts hob to use both pre and post files to store its
configuration. Any variables which affect initial parse are set in the pre
file and all others in the post file.
Unfortunately this requires hob related code to have even more hard-coded
data as to what is relevant but this is the simplest way to solve issues
with variables and parse order at this time.
Addresses [YOCTO #1281]
(Bitbake rev: 02ab0e11d8dd42f5ca440b3d8d2073e23f55113a)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It doesn't make sense to be able to modify the preferences and add/remove
layers whilst a build is in progress - disable the relevant menu items once
the build has started and re-enable them once the user has returned to the
creation view.
(Bitbake rev: 0423587db09f6f28cf9d801f5657a84157f42dbe)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was actually broken with recent changes as the values were never
persisted to a file (meaning they were unset on the server at reparse
despite the UI indicating they were set).
However, I've chosen to remove the 'feature' as pegging a users CPU without
them asking to use high thread counts seems a little offensive.
(Bitbake rev: 27dcf245abf3805be47894773406392fdf055e48)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If IMAGE_FSTYPE is empty and the user has opted to build an image warn
them and prevent the build.
Fixes [YOCTO #1267]
(Bitbake rev: 023edbe6d04f25c7e0e7b615eb06cd3727c665cb)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the models new get_selected_pn method to return a list of PN's for the
selected items and pass that for a package only build, rather than passing
a list of package names (which buildTargets can't handle).
Fixes [YOCTO #1385]
(Bitbake rev: c969857c7f5963098e6584803eafb4e2be0eea46)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user hasn't made any selections inform them that they need to do so
before clicking Bake.
Fixes [YOCTO #1384]
(Bitbake rev: e176dcf637da2d0105a4361a46d5df5238e3b8ce)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The data-generated and model-updated signals are different, the model
should only be accessed *after* the model-updated signal. Move code
setting the image combo's backing model to the model-updated callback to
ensure the combo is accurately set when changing the machine with an
image selected.
(Bitbake rev: 46953d3b4595667935d43fe7b20264ae0efd1bdf)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The HobEventHandler passes events on to RunningBuild when a build is in
progress. This patch resets the HobEventHandler to handle events when the
build is complete.
(Bitbake rev: 3d66d4e64a6352c01662a24ee957eddcd3fde7fc)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Find returns -1 if the substring isn't found, so checking for the
Truthiness of the return value is insufficient. An INCOMPATIBLE_LICENSE
value which only includes GPLv3 will cause find to return 0, for example.
Fixes [YOCTO #1320]
(Bitbake rev: 28c71e63355ca94402a9049b8a07046e7b460026)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Addresses the second part of [YOCTO #1311]
(Bitbake rev: d790386112b0beb444713a12d766bd4bd3441f56)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the new sequential option of RunningBuild to ensure this.
Fixes the first part of [YOCTO #1311]
(Bitbake rev: 972769e6362ea3cf35c8fb7cdfbb147758d0a2f2)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move temp directory handling into the HobEventHandler and clean up the
temporary files on program close.
Fixes [YOCTO #1307]
(Bitbake rev: 1009ca570a750a00b0e60afcc30ead070c7b310a)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we receive the fatal-error signal from the handler display a dialog
informing the user of an error and displaying the error message. Dismissing
the dialog quits the application.
Fixes [YOCTO #1279]
(Bitbake rev: 04dbd80bbc9ffe2a566b8cc488f0feebadcdde60)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Prevent the busy cursor being shown after hob exits if quit is called
whilst the busy cursor is set.
(Bitbake rev: 7b977ff222d4a318efabd0ca5f37fa03b9acb996)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add some (namespaced) custom variables to the configuration file for sake
of this UI.
(Bitbake rev: c9dd2592434338bdddb3cc6f42e760c86fa9e6bb)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. reflect GPLv3's presence in INCOMPATIBLE_LICENSE value in the UI
The hob UI currently only supports GPLv3 as a value for
INCOMPATIBLE_LICENSE but doesn't properly reflect whether the value is
already set. This patch rectifies this.
2. don't stomp over other INCOMPATIBLE_LICENSE values when disabling GPLv3
In case the user has other values set for INCOMPATIBLE_LICENSE we don't
want to overwrite the value, we want to modify it.
Fixes [#1286]
(Bitbake rev: 68b992922bc7148d657a1c706c6acc67812a87c0)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The signal handler of the 'Base image' combo was still connected during load
such that updating the UI to reflect the loaded base image triggered a change
of the model. Fix this by disconnecting the signal handler when updating the
displayed 'Base image'.
Fixes [YOCTO #1282]
(Bitbake rev: 58036a79cb79d1dff307e2cfed0e684493178507)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch enables a user to build a rootfs containing only the selected
packages without having to have first selected a 'Base image'.
Fixes [YOCTO #1239]
(Bitbake rev: 05c82da31a69c910e72b58b07afcd9fca8c55479)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As the combo is created before its backing model it's common for the combo to
be drawn at its minimum size and then grow the first time the user activates
it. This slight ugly patch forces the combo to be resized as soon as the
model is associated so that by the time the user interacts with the widget it
is less likely to change size.
(Bitbake rev: 65819447ccc96ae2af8d42cf3a31769ef3d2d26e)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'View Log' button is potentially confusing to existing users of the
system who may be expecting to be shown the on disk logs of the build.
Instead use 'View Messages'.
Addresses [YOCTO #1222]
(Bitbake rev: 105bfe3562235fb586be4b4179bb34b2e94ef234)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The link to open the deploy directory should only be shown if the build
completed succesfully.
(Bitbake rev: d947f9880c2205be66fbd61cf7d3728275979a56)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to use the buildTargets command to ensure dependencies, such as
native tools to build the rootfs, are correctly included. This patch
achieves this by modifying BBPATH and BBFILES to include matches for the
location of the generated recipe file and reparsing the metadata before
calling buildTargets.
Fixes [YOCTO #1228]
(Bitbake rev: 5840d59098141e773c12bea8ed8d9f4f1a706132)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The command_map was never a good idea, what's implemented here is a
fraction less ugly but a significant factor more readable and therefore
easy to maintain.
The method implemented in this patch also has the advantage of not being
static meaning we can determine the desired runCommand arguments
dynamically at call time.
(Bitbake rev: 8b11c68ffcda355d0ba49cfc27790d245192ae24)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The preferences UI to set the image output type only supported setting a
single value whereas it's common practice, particularly for those making
use of the ADT, to set multiple values. This is also the default in Poky.
This reworked preferences UI dynamically generates check boxes for each
available image type and sets an appropriate string representing all image
types when checkboxes are toggled.
Includes fixes for [YOCTO #1273]
(Bitbake rev: f7f68847dd165f2ad0f39011db4ebfef3ae73f42)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When resetting and clearing all selections the searched for term is no
longer the selected row in the packages list, clear the search entry to
prevent cognitive disconnect.
(Bitbake rev: 4f86f5763ecf7f3a9673a9b18e96042e9387699b)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use string.strip() as a much safer method of turning the -j value into an int
Fixes [YOCTO #1244]
(Bitbake rev: 03baee9e0a7fc15fc6c226c07c0f50df136ac5b0)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds explanation of the different options when asking the user
to choose between Stop and Force Stop so they can make an informed choice.
Fixes [YOCTO #1223]
(Bitbake rev: afb87a809962b756f8282c9e9fdf9b15cdb9192b)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user decides to cancel the save as dialog we should not try and save
regardless.
Fixes [YOCTO #1220]
(Bitbake rev: 3412fbd6a16980e0fba7742c32675eea9d77d6c0)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The path is not guaranteed to always point to the same value so do not rely
on it to change the image contents. Further, when changing the base image
we should maintain user selections.
Addresses [YOCTO #1225] and fixes [YOCTO #1226]
(Bitbake rev: 737d1bc819b192b4c2caa0482bddb6921b5aac93)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Highlights include:
* Atempted GNOME HIG compliance
* Simplified UI and interaction model
* Sorting and type to find in tree views
* Preferences dialog to modify local settings
* Dialog to add and remove layers
* Search in packages list
* Save/Load image recipes
The build model has been changed, hob will attempt to build all dependent
packages of an image and then use the buildFile server method to build the
created image.
(Bitbake rev: 48e64acaae4a741b9f5630f426fb4e6142755c2c)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using gobject.threads_init() instead of gtk.gdk.threads_init(). These
two modes are conflict to each other. Using gobject.threads_init()
allows only the main thread to touch GUI(gtk) part.
(Bitbake rev: b9698d0e8d681f1fd6ab8d28530136b85411386f)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joshua Lock
Paul Eggleton
Jessica Zhang
Lianhao Lu