The file hiearchy was stale for the meta-crownbay examples in
recipes-graphics. I updated in two places.
(From yocto-docs rev: a16bf8ae56efb907a50fbe4c16be0adfeec5c275)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This example had gone stale. I cloned the meta-intel repo and
copied the edison branch version of the file into the manual.
(From yocto-docs rev: 963c53157f147c556cc4317f68fafeb0650268cc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All the links to any YP manual for the 1.1.1 release now use
"http://www.yoctoproject.org/docs/1.1.1/....".
(From yocto-docs rev: 178d16e8693550341a4d307e36af934ce0bfe4c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The re-structuring of the web server that holds the documents created
some bad links. I thought I had gotten them all but apparently not.
this is a drawback of not being able to test things until after stuff
is done. In any case, I grepped through everything and this takes
care of it.
(From yocto-docs rev: cdbc3b3b7f6d6ff01024b977f966459cf414ad5c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the example I use for the BSP structure I use the Crown Bay
BSP. I neglected to include any explanation of the recipes-core
directory. I have added some description around this area.
(From yocto-docs rev: ba56c86e5a4aa3fbf23b12d26ffe35a3b6193a78)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because the Crownbay uses both EMGD and non-EMGD statments in the
linux-yocto_3.0.bbappend file I had to do some explaining. It turns out
you don't really need to just delete or comment out the non-applicable
statements.
I also adjusted some wording around the tuning file example. This file
I assumed was in the conf directory of the meta-crownbay directory.
It is really in the meta/conf/machine/include directory.
(From yocto-docs rev: 3f82656f7ffb392333f8cf59abf1414af5da512b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The file used a lot of crown bay stuff that had gone old.
I have updated the sections and used the latest Crown Bay
files.
(From yocto-docs rev: 67b119d66bacd0870f18a124bacabf32d65b6f3b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a parallel textual construct at the beginning of each section
that details a directory in the Yocto Project file's structure.
I did not like starting these sections with a literallayout string.
(From yocto-docs rev: 5dde476f0c02d655217f3fa863522e8b7df57cda)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
changed 'meta/recipes-kernel/kernel' to 'meta/recipes-kernel/linux'
as the location for existing YP kernels found in the repository.
(From yocto-docs rev: c8ce3a15429df5c980498ce217803cf5a59cbdc9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added more explanation about the base directory (meta-<bsp_name>) to the
Example Filesystem Layout section. These changes were suggested by
Tom Zanussi to help users understand better how to add BSP layers
to the build system.
(From yocto-docs rev: ced445910363b2f10b5b5ca72236f54ae4b7e050)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the 'BSP Click-Through Licensing Procedure' section there was an
old link to the BSP download page on the Yocto Project website. The
link was non-functional. I fixed the link so that it points to the
Yocto Project BSP Download page. I also re-wrote the paragraph to
read better.
(From yocto-docs rev: b87714fa54f71aa061126b7f29d80723a90818e8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the '1.1.3 Pre-built User Binaries' section it said that the
ADT and minimal images were kept in the optional
meta-<bsp_name>/binary directory. Jianjun Xu pointed out that
in fact it is just the minimal and sato images here. I also
confirmed with Tom as well. I re-wrote this sentence to be
clearer and more accurate.
(From yocto-docs rev: 6757abff52841b5d1e1991ab22314fa7a243a87d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the '1.1.4 Layer Configuration File' section there was a BBFILES
statment that used the '\' character to indicate a continuation of the
command on the following line. However, the example did not use
a new line. I added the hard-return to correct that in the example.
(From yocto-docs rev: 185352ae2f5879a8418715053f3791b167bd6d7e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the example BSP name 'meta-intel_n450' to 'meta-n450' in
the section 'Example Filesystem Layout.' Error found by Jiajun Xu.
(From yocto-docs rev: 0dd6f97dcc51cec4bae96ca0430af9300619749f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Performed a spell check and caught a couple small things.
(From OE-Core rev: 17ae7d1e05df495a5e27168cdcdfbcf96337a3f9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- use linux-yocto instead of linux-yocto-stable in examples
- change branch names to match linux-yocto usage
- remove outdated 'wrs' where it appears
(From OE-Core rev: 7f1662ef01b383c9fecb2b30ade50de97f17529a)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 553] - In the 'BSP Click-Through Licensing Procedure'
section, which is shared between the BSP Guide and the Poky
Reference Manual, there were three links to 'pokylinux.org'
sites. These links were intended to help a user get a license
for encumbered BSPs. However, the links never did work. The
section also had some wording that described a propsed naming
convention for BSP tarballs that were encumbered and non-encumbered.
The naming convention is a good idea but has not been followed
so far.
I removed the links and replaced them with general instructions
on how to get through the licensing situation. Also removed the
hard-line naming rules and replaces with a more general explanation
of how we are naming BSP (e.g. Crown Bay).
(From OE-Core rev: 4c2dcb376b4be0778cab97138fefdb8a27a0e708)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are some sections now that don't correspond one-to-one with the
standard file structure presented in section 1.1. So I am commenting them
out for now. Since I am still in the process of iterating on this
manual I don't want to just delete the information.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Section 1.1 has the example filesystem layout. The last line of the
example filesystem layout had linux-wrs. It has been changed to
linux-yocto-stable.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I added a reference to the specific section in the kernel documentation
that describes how to create a BSP Based on an existing similar
BSP. The tools we have that create the PDF manuals from the DocBook
XML do not support cross-referencing to another PDF manual. So, I was
left with adding a clunky text-based reference to the section and a link
to the docs page on the web-site.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Added wording to indicate this directory as optional if the BSP had
special requirements for graphics support.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Found a mis-spelling that I corrected.
Also added wording to indicate this directory is optional.
Put in a note telling that defaults are set if a formfactor is
not found.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Added wording to be sure user knows to replace "bsp" and "_bsp" in the
boilerplate template example with the actual BSP name (i.e. <bsp_name>).
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
It makes more sense to have the sections that describe the various
parts of the common structure as sub-sections to that. That pulls
out the click-through licensing into a higher-level section.
This is better overall section organization.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
There are some sections now that don't correspond one-to-one with the
standard file structure presented in section 1.1. So I am commenting them
out for now. Since I am still in the process of iterating on this
manual I don't want to just delete the information.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Added some text in section 1.1 explaining that the file structure example
is an example and that the file structure of specific BSPs could differ.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Lowered the "E" for the "meta-emenlow" BSP.
Removed the "oaktrail" one, which is an Intel code name and replaced
it with "beagleboard", which is a non-Intel board.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark
Paul Eggleton
Richard Purdie
Tom Zanussi