All six manuals updated.
(From yocto-docs rev: 753e3eb80b1fa6148e12f9eb93d23f4613b6be05)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Poor flow for the config_smp example. Upon reading this example
it did not stand well on its own. I added some text, albeit
redundant but necessary I felt, so that the example would stand on
its own.
(From yocto-docs rev: 1677a873e9bd1124a5ff0234edc1ee05938c19b0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I left "work" off the name of the copy of the clone repo
for the kernel example.
(From yocto-docs rev: 26f3dd9c82beb3c8d6e50c2132756bdb4b29b56d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example now uses an edison branch of the poky-extras repo.
Now that that is necessary, there needs to be explanation in the
example on setting that branch up after creating the local
repository.
(From yocto-docs rev: 70599a07a6efb0ae2da04baa43b5bb99c9ec4e5d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because the names of the bare clone and copy of the bare
clone kernel repos changed in the example this figure needed
to be altered.
(From yocto-docs rev: e49ec4256bd9fe9f1193b70f8a5ab864c069c863)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changing the name of the bare clone and copy of the bare
clone for the appendix A (kernel) example affected this
figure of the file structure. I updated the figure, which
is now specific to 1.1.x and added it. I also had to remove
the figure that will now be specific to (master) work.
(From yocto-docs rev: 048af1a6945991c66abef72de05c136e8071a9e5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To make the kernel example more easily understood, Joshua Lock
suggested that the names used for the bare clone of the kernel
git repo and the copy of the bare clone be more different. So
I have changed the example such that the bare clone repo is
named linux-yocto-3.0-1.1.x.git and the copy of the bare clone
(or working repo) is named my-linux-yocto-3.0-1.1.x-work.
Note that this also implies the use of the linux-yocto_3.0-1.1.x
kernel and not the linux-yocto_3.0 kernel.
All the changes made here should take care of the example. I
did have to introduce a new figure that showed the kernel
repos based on the new names used in the example. Also, I had
to delete the other from this branch. The examples are now
diverging according to (master) work and 1.1.x work.
Reported-by: Joshua Lock <joshua.lock@intel.com>
(From yocto-docs rev: f4fdef6078fccfc2c72b6e0ad1dfae1f1ecb2aa6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a link that was still yoctoproject.org/downloads. I changed
to downloads.yoctoproject.org.
(From yocto-docs rev: 26c87f543c95efcd7e5a546b3cd0d0756a238fa5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The figure that shows the kernel repos needed the git push
command fixed. There was no ":" character in it.
(From yocto-docs rev: 69874766764788f08dc448b9835d41b6c67fcd8a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example that shows menuconfig and where the .config file is
was updated to show the use of linux-yocto-3.0 kernel.
(From yocto-docs rev: a9f7a73842b428242da95f3dfe6a7b31c123ebc2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to update the figure again and I updated the surrounding
text.
(From yocto-docs rev: d3a0cb2b24dabdf4a022a7426aeb2b80b40ae544)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the picture that shows the index of releases. they renamed
this from index of downloads.
(From yocto-docs rev: 098648434311bbe6de68fbbf89486ee1f9c0e4ec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is note instructing the user to delete unused .bbappend files
or comment out the COMPATIBLE_MACHINE statements in those unused
files before running the build in the example. the note was not
clear about the COMPATIBLE_MACHINE statement in the .bbappend file
that is actually being used. I edited the text to be clear about
that.
(From yocto-docs rev: 44277b9c5d8a77958a4220fa790bc13e9ce697b3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'dd' example needed updating for the output that shows the
size of the image.
(From yocto-docs rev: f7cee3f3b9ccf2760de182b3d545e8d53ef83786)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the console output created when you create the bare clone
and the copy of the bare clone.
(From yocto-docs rev: 73130ec4a785417c5b8a91c0b577ac3681562b77)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the console output returned when you set up the
poky-extras repo.
(From yocto-docs rev: f4a6bea21df8dc6df1c30288a6ea93218e7d614d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After building the BSP example the dd example command is being updated
with new image.
(From yocto-docs rev: ed9dc2a1af1c1160d03b0b12f06c91028120f177)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As Reported by Robert P. J. Day.
Robert was working through this BSP example in the development manual
and ran into some problems and some confusion in areas. This launched
a long "help-desk" session with Tom Zanussi. In addressing Robert's
issues, Tom decided to make a run through of the example as it was
written. For the most part the example was sound but needed some
technical tweaks as well as some expansion of the text to make things
clearer. Tom submitted the patch that addressed these concerns.
Scott Rifenbark reviewed the patch and further modified some of the
writing to make it consistent with the existing writing in the manual.
(From yocto-docs rev: b95b9077bce1de55da4c0fc6208e2f2dac10c1e5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For some reason the example for the "Changing recipes-bsp" section
mysteriously had the wrong first command in the example to prepare
this stuff. The example was removing something in the recipes-graphics
area. Don't ask me how it got there. I checked through the commits
in the Edison branch and can't find the change. It could have happened
during 1.1.1 scrub.
Anyway, I have fixed the 'rm' command to be appropriate for the
example, which works with recipes-bsp.
(From yocto-docs rev: a53d46b5f0dbbdfac902abc5844085bee3aeb6d9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Verifying the 1.1.1 release and creating the local repo of meta-intel.
The console output is significantly different. I have updated the
returned console output.
(From yocto-docs rev: 653e1214861e98501d37543403c5324c4d153112)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a couple more occurrences of old links to the machines
area of the downloads. Fixed them.
(From yocto-docs rev: 276352d49612bf77ed9e828c54bc1bc008345839)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed a couple of links for the yocto-1.1.1/machines area. These
links were old and pointing to yoctoproject.org/downloads. They
are now changed to http://downloads.yoctoproject.org/releases..
(From yocto-docs rev: cee9d5eb0b095ba647411abaf12f591e216e461f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a link that had a spacing problem and should not have
been linking to the manual in general. Fixed the spacing problem
and removed the links to the book in general.
(From yocto-docs rev: 0894e05dfa59b08f5c4e29a5aafbc2e5487f442c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found another broken link to the Git documentation. They must have changed
this stuff up. So I set the link to point to the appropriate area in
the Git Community Book. Talks about distributed workflows.
(From yocto-docs rev: b668c8c65fdc51e0100e9ddd1c54e4926579bbe2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
there was a link to some Git documentation referencing workflows that
apparently had gone stale. I replaced the reference with a link to
the Git Community Book.
(From yocto-docs rev: 3a21f7454ec04e082d58646eecc1cffe3caa046c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Git Workflow was missing a pull line from the second (bottom) contrib
box into the project's master Git repository. I added the line.
(From yocto-docs rev: 3988e0197a7e3a6cde647f01da9ae41fd9465c75)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the top-level directory created from unpacking the
edison-6.0.1 tarball from 'poky-1.1.1' to
'poky-edison-6.0.1'.
(From yocto-docs rev: 7af332806f1f4952f8e7672243d077e4ecde7fc5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed to change the "6.0" occurences to "6.0.1" in the examples.
(From yocto-docs rev: d6b40b3b0e98eba7f3221e79cb9612f8f10bffaf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Decision made to treat every release like a major release.
This caused a scrub through the manual for the string "1.1"
and "6.0" and changed to "1.1.1" and "6.0.1". Also the
release date changed to 17 February.
(From yocto-docs rev: 8438b152ba13dab079b3918fecc418be5ddc19c0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All the links to any YP manual for the 1.1.1 release now use
"http://www.yoctoproject.org/docs/1.1.1/....".
(From yocto-docs rev: 178d16e8693550341a4d307e36af934ce0bfe4c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All history table entries added for the five YP manuals.
At this commit the date was not known so a place holder date
of 12 January 2012 is in there. I needed to commit this
separately so that I could move onto other changes for the
docs.
(From yocto-docs rev: 4983a6d66d659aa7a0cc5d4953716a55f24fb03b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the Bug Tracking section to include rudimentary use of
Bugzilla for entering a new bug.
Fixes [YOCTO #237]
(From yocto-docs rev: 425965d7562f990c1f46901220caf4d79313336a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The restructuring of the web site where we store manuals broke some
links that were cut-and-pasted in from older work. These slipped by
me so not changing them would direct the user to a 1.0 version of
the externally referenced manual rather than the 1.1 version.
I also got rid of a visible "WRITER'S NOTE" in the document that
was left behind.
(From yocto-docs rev: 1508826312a2fe35e5d693821a4c7737baafcb2e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I had to add some changes to the way we invoke qemu to show multiple
processor support. I needed the qemuparam "-smp 2". There are
other minor edits as well.
(From yocto-docs rev: 508863634ce537b0936f8e44f87b90bef678c122)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the pathnames for kernel 3.0 from 2.37
(From yocto-docs rev: 220ce5fbb3663940b5940445190d30d98f58a438)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor edits for the kernel example.
(From yocto-docs rev: 01e9f01662efad746fbfc34820b6efeb34affecd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After greping through the documentation directory, I addressed
all the <ulink> statements that used to have yocto-1.0 in the URL.
They are now yocto-1.1.
(From yocto-docs rev: 97d160263c5905fdeaf4ec285bc5359918790581)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I re-ran the exmaples to set up various Git repos and updated the output.
Also fixed a bad tarball name from edison-1.1 to edison-6.0
(From yocto-docs rev: 6538d588fa35986ff301a22d327af73c337ec43c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made a pass through the book to clean up all areas in preparation to
running the examples again. Most changes were punctuation, manual
section reference formats, and wordings.
(From yocto-docs rev: 0d054f79c82ddc204938dea187312d1a80d0a2e1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
More changes to the internal section references. Using <link> rather than
<xref> to get rid of the section number in the reference.
(From yocto-docs rev: 4351fd4898c517e25235611893b1cd059cbcc2f8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I am using a certain form to reference other sections in the current
or other manual. I updated the references to follow this form.
(From yocto-docs rev: 2ba41ac2f355dbe66af19e356f9246b7485585b5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the bernard examples used when creating Git repos to reflect
the edison release.
(From yocto-docs rev: d345cb08905e7f5e21b1649af5e876317cc68931)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed several small things in the example as I worked through it
once again. The commit IDs changed for using the atom-pc kernel.
Also the command to build the sato image can no longer use 'live'.
(From yocto-docs rev: faff1e7f21b5059dfe708c6a3d83116c7349fe55)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the title pages for the ADT, BSP, Dev, and Ref manuals to
contain the Oct 6 release date for the books. Also, changed the
author field for the BSP guide to include Tom Zanussi as well
as Richard Purdie.
(From yocto-docs rev: 301da0a5b305e4b332397bb67f6a6a77751991d2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added the directory where the list of know licenses are in the YP
files structure (meta/files/common-licenses).
(From yocto-docs rev: 6a8db1a5ac653dbc8730e61293221c0b0890888d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes are the second edit pass for the new section.
There are some minor changes.
(From yocto-docs rev: 6c81617a2782d2f02d4900a68dd4e8c6eeb70fa1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Tom Zanussi