Because the names of the bare clone and copy of the bare
clone kernel repos changed in the example this figure needed
to be altered.
(From yocto-docs rev: e49ec4256bd9fe9f1193b70f8a5ab864c069c863)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To make the kernel example more easily understood, Joshua Lock
suggested that the names used for the bare clone of the kernel
git repo and the copy of the bare clone be more different. So
I have changed the example such that the bare clone repo is
named linux-yocto-3.0-1.1.x.git and the copy of the bare clone
(or working repo) is named my-linux-yocto-3.0-1.1.x-work.
Note that this also implies the use of the linux-yocto_3.0-1.1.x
kernel and not the linux-yocto_3.0 kernel.
All the changes made here should take care of the example. I
did have to introduce a new figure that showed the kernel
repos based on the new names used in the example. Also, I had
to delete the other from this branch. The examples are now
diverging according to (master) work and 1.1.x work.
Reported-by: Joshua Lock <joshua.lock@intel.com>
(From yocto-docs rev: f4fdef6078fccfc2c72b6e0ad1dfae1f1ecb2aa6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a couple more occurrences of old links to the machines
area of the downloads. Fixed them.
(From yocto-docs rev: 276352d49612bf77ed9e828c54bc1bc008345839)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed a couple of links for the yocto-1.1.1/machines area. These
links were old and pointing to yoctoproject.org/downloads. They
are now changed to http://downloads.yoctoproject.org/releases..
(From yocto-docs rev: cee9d5eb0b095ba647411abaf12f591e216e461f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a link that had a spacing problem and should not have
been linking to the manual in general. Fixed the spacing problem
and removed the links to the book in general.
(From yocto-docs rev: 0894e05dfa59b08f5c4e29a5aafbc2e5487f442c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Decision made to treat every release like a major release.
This caused a scrub through the manual for the string "1.1"
and "6.0" and changed to "1.1.1" and "6.0.1". Also the
release date changed to 17 February.
(From yocto-docs rev: 8438b152ba13dab079b3918fecc418be5ddc19c0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All the links to any YP manual for the 1.1.1 release now use
"http://www.yoctoproject.org/docs/1.1.1/....".
(From yocto-docs rev: 178d16e8693550341a4d307e36af934ce0bfe4c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After greping through the documentation directory, I addressed
all the <ulink> statements that used to have yocto-1.0 in the URL.
They are now yocto-1.1.
(From yocto-docs rev: 97d160263c5905fdeaf4ec285bc5359918790581)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes are the second edit pass for the new section.
There are some minor changes.
(From yocto-docs rev: 6c81617a2782d2f02d4900a68dd4e8c6eeb70fa1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
General edits up through the BSP and Kernel overview sections. I also put
in place holder text and began on the application development over
section.
(From yocto-docs rev: 9c1b681ff253b469bffc355f0a938643997d85d4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to the dev-manual-model.xml chapter for general improvements.
Also had to update the figure that shows the kernel development flow.
(From yocto-docs rev: 2aacccb03d167eac74a1b45c39a9edac160efc7f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Feedback per Dave Stewart added to clarify which two important
configuration files need editing.
(From yocto-docs rev: f37ade7f0d31ae6284c3bfee184c88b523f5fe69)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Complete re-write of this section based on feedback from Dave Stewart.
Dave's comments centered around not being able to understand the overall
concepts of the Git repositories, the source areas on the host, etc.
I have added several illustrations and written around them to try and
better explain the kernel storage system in Git used by YP and how
that tranlates into host-resident code that the developer ultimately
uses and the Poky build system uses for the build.
(From yocto-docs rev: 4e37f68f77261f6519426fb81ba407c456f8d1a1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. now refer to the linux 2.6.39-rc1 as the 'latest upstream release
candidate available.
2. Noted where you can find the linux-2.6 kernel - in the meta-kernel-dev
area.
These changes were from Bruce Ashfield's review of an early version
of the Yocto Project Development Manual.
(From yocto-docs rev: 83d6e75e7d5f4d60040c4b7ebb0c7bb11b1b67e8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield's review comments indicated that we will be using
linux-yocto-3.0 and not linux-yocto-2.6.37. So I am putting these
changes in to anticipate the 1.1 release.
(From yocto-docs rev: ecbe1c90c5aa65b2dde77ba6094b5956e37d061d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to set to scalefit="1" so this figure would appear correctly in the
PDF version of the manual.
(From yocto-docs rev: 166305f39859e11f15702a8f6eb1f5a524b589c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After getting the example in kenerl example appendix working I discovered
much that was wrong in this overview. The overview attempts to generalize
all the situations for kernel modification. These include code changes,
configuration changes, and the addition of new recipes. It also includes
the situation where a developer wants to gather all the changes into a
separate layer for distribution and for when they want to push them up
the tree.
(From yocto-docs rev: 5498d7b38d3a2f14befa82b66af9919a449e0f04)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to tweak the viewing area to get two figures to display
correctly in the PDF version of the file.
(From yocto-docs rev: 89b2618e11c05744f54a9fbd39cd899117a2affc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the flow section for the kernel modification section I added a new
step for getting a local copy of the linux yocto kernel files. The section
indicates that you need a local Git repository of the files and then
references back to the Getting Started section for an example.
(From yocto-docs rev: 6601e06635c6f57ddbf8109cc1dfdc8a8e7f74af)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the image description list to the Yocto Project Reference manual
where it really belonged. Appropriate references were added.
(From yocto-docs rev: fc74439c09d1f45cdfbc24d972045e574ffa91ec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made another edit pass through the high-level kernel modification flow
list. this is the list I will work from while trying to actually do
the task.
(From yocto-docs rev: ac9b2d8961abec9016c6c1e10222d0af36c4be4c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PDF version was not allowing the image to have enough room for proper
display. Increased to 8.5 inches.
(From yocto-docs rev: 425abd53eac41a9466af45e277be8b0d8202e27d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In dev-manual-model.xml I included two references: one to the
BSP Development Example and one to the Kernel Modification Example.
I had to add the target "id" stuff to both dev-manual-bsp-appendix.xml
and dev-manual-model.xml
(From yocto-docs rev: bcae1e723610e1769f0a524e3c1d9918c7cb1061)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added structure to contain sub-sections for system (BSP and kernel)
and application overviews.
(From yocto-docs rev: 028f65219b001081d221d63f368ff06066a95a64)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "models" chapter is going to be the overview section for the cases.
Thus, the cases chapter will disappear. This is a first step in that
direction.
(From yocto-docs rev: fe3985db8e1dbc7bff6565d3624bccac0f809621)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This version of the content is a placeholder only.
(From yocto-docs rev: 3c896a95f2d6593ef8af3d90829611122bef9aae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark