To make the kernel example more easily understood, Joshua Lock
suggested that the names used for the bare clone of the kernel
git repo and the copy of the bare clone be more different. So
I have changed the example such that the bare clone repo is
named linux-yocto-3.0-1.1.x.git and the copy of the bare clone
(or working repo) is named my-linux-yocto-3.0-1.1.x-work.
Note that this also implies the use of the linux-yocto_3.0-1.1.x
kernel and not the linux-yocto_3.0 kernel.
All the changes made here should take care of the example. I
did have to introduce a new figure that showed the kernel
repos based on the new names used in the example. Also, I had
to delete the other from this branch. The examples are now
diverging according to (master) work and 1.1.x work.
Reported-by: Joshua Lock <joshua.lock@intel.com>
(From yocto-docs rev: f4fdef6078fccfc2c72b6e0ad1dfae1f1ecb2aa6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the console output created when you create the bare clone
and the copy of the bare clone.
(From yocto-docs rev: 73130ec4a785417c5b8a91c0b577ac3681562b77)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the console output returned when you set up the
poky-extras repo.
(From yocto-docs rev: f4a6bea21df8dc6df1c30288a6ea93218e7d614d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Verifying the 1.1.1 release and creating the local repo of meta-intel.
The console output is significantly different. I have updated the
returned console output.
(From yocto-docs rev: 653e1214861e98501d37543403c5324c4d153112)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the top-level directory created from unpacking the
edison-6.0.1 tarball from 'poky-1.1.1' to
'poky-edison-6.0.1'.
(From yocto-docs rev: 7af332806f1f4952f8e7672243d077e4ecde7fc5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed to change the "6.0" occurences to "6.0.1" in the examples.
(From yocto-docs rev: d6b40b3b0e98eba7f3221e79cb9612f8f10bffaf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Decision made to treat every release like a major release.
This caused a scrub through the manual for the string "1.1"
and "6.0" and changed to "1.1.1" and "6.0.1". Also the
release date changed to 17 February.
(From yocto-docs rev: 8438b152ba13dab079b3918fecc418be5ddc19c0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All the links to any YP manual for the 1.1.1 release now use
"http://www.yoctoproject.org/docs/1.1.1/....".
(From yocto-docs rev: 178d16e8693550341a4d307e36af934ce0bfe4c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The restructuring of the web site where we store manuals broke some
links that were cut-and-pasted in from older work. These slipped by
me so not changing them would direct the user to a 1.0 version of
the externally referenced manual rather than the 1.1 version.
I also got rid of a visible "WRITER'S NOTE" in the document that
was left behind.
(From yocto-docs rev: 1508826312a2fe35e5d693821a4c7737baafcb2e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I re-ran the exmaples to set up various Git repos and updated the output.
Also fixed a bad tarball name from edison-1.1 to edison-6.0
(From yocto-docs rev: 6538d588fa35986ff301a22d327af73c337ec43c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the bernard examples used when creating Git repos to reflect
the edison release.
(From yocto-docs rev: d345cb08905e7f5e21b1649af5e876317cc68931)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied consistent section referencing formats. Also cleaned up some
terminolgy for the YP Git repo.
(From yocto-docs rev: fa3cbb835b61158357d3f6fb9ebe017b9ba405cf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed a type and also qualified the ability of YP as a testing environment.
(From yocto-docs rev: e158615eba04709e05cccaf29238bde6c9843671)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made several editing corrections for various terms and phrasings based on
Scott Garman's review.
(From yocto-docs rev: a21ba80151ce82683d45cd67ddb0728d779b007a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield suggested adding a note near the explanation of creating
a bare clone that suggests if the user already has a linux yocto kernel
Git repo handy they can reference that repo in the 'git clone --bare'
command rather than referencing the upstream source repository as
a way to speed up the process.
(From yocto-docs rev: 132a9cfcef3397677b54eace7831d25f8a321b93)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield's review comments indicated that we will be using
linux-yocto-3.0 and not linux-yocto-2.6.37. So I am putting these
changes in to anticipate the 1.1 release.
(From yocto-docs rev: ecbe1c90c5aa65b2dde77ba6094b5956e37d061d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I separated the section that explains how to set up the poky-extras
git repository. This used to be in the kernel area right after
creating the bare clone and the copy of the bare clone. I thought
it would be better as a stand-alone bulleted item.
(From yocto-docs rev: 4ea917c7218f238e2b0d2bb377a97f4b1f5eb1f6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added instruction on how to set up a bare clone of the linux yocto
kernel files and then how to create a clone of the bare clone.
Finally added a part about setting up the meta-kernel-dev repository.
This setup should do it for those that want to modify the kernel and
not have to download source files from the upstream everytime they
make a change.
(From yocto-docs rev: 90ae8249d119d5db17507eea37eb6deb0822a682)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the section that shows how to get various groups of files needed for
using YP I added a bulleted item to show how to clone the linux yocto
kernel files. this section will be referenced from the kernel example
flow section and the kernel example appendix.
(From yocto-docs rev: 4126d1456290d677ab8dc1d02d11aac6eb8add46)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the user should use Git commands..no probably about it.
(From yocto-docs rev: 84b0b4e8c7b6b89c81503f40ba855e9f624887c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Character does not display in PDF version.
(From yocto-docs rev: 8f9b114190257cfe5425f6e322dcfb6f03941bf8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the YP BSP naming scheme to the general getting started section
where it talks about getting BSP files on the local system.
(From yocto-docs rev: 5b8dc20a52053341ac726fe6662152397262d5e8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the example for setting up meta-intel into the getting started
section. This information is universal and needs to be isolated.
(From yocto-docs rev: d43ecd16a95fa53cafa09e933c67cacd85227021)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the section that provides the universal methods of getting a local
version of the Yocto Project files and BSP files on the development system
into this section. this information needs to be referenced throughout
examples so it should be in one location.
(From yocto-docs rev: 718ea5b468d816ea4f61a6ffa4de7db396fe3ed4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have a new understanding of the files resulting from setting up
Git repos as compared to getting files from tarballs. I changed
some wordings to help make those distinctions.
(From yocto-docs rev: b7ba9df07cf9d64f61ac73e501c253c42570970d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The original content of this chapter was simply a copy of an existing
adt-manual file. I have added the content for the chapter.
(From yocto-docs rev: cac53540d8449f605ab40775c317b613711f3a80)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark