All the links to any YP manual for the 1.1.1 release now use
"http://www.yoctoproject.org/docs/1.1.1/....".
(From yocto-docs rev: 178d16e8693550341a4d307e36af934ce0bfe4c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Beefed up the introductory paragraph a bit.
(From yocto-docs rev: 99e0b95d4827dcc309ab0f212801fc86758a297d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Long-term strategy for the YP Reference Manual is that it contains
reference material and not "how-to-information". A step in this
direction is to isolate any discussions on components and other
areas of YP that need talked about. So to start with, I have created
a new chapter for now named "Technical Details" that so far has
a discussion of some components and shared state. This is a
step in the direction of making this manual a reference manual and
not a "how to" manual.
Changes included removing redundant material from the 'usingpoky.xml'
chapter and also adding the new chapter 'technical-details' into the
'poky-ref-manual.xml' file used for the make.
(From yocto-docs rev: a01477f787768230bc25da2d094326922be23dd4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed some comments that were buried in the file that were
notes for working on the sstate section.
(From yocto-docs rev: bd03315031bbb1b682dcd2253f85fc184822a28e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
First draft of a re-write to the "Running a Build" section to try
and satisfy YOCTO #1500. I segmented the section into three areas
rather than a single area. This allowed me to create a sub-section
for the sstate stuff where it could be addressed on its own. I sent
the draft out to Richard and Mark H. and got feedback from RP that
is going to cause further changes. Thus, I am committing this partial
change.
(From yocto-docs rev: f040ed6979e988968863016103aa3ad4e7365159)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The re-structuring of the web server that holds the documents created
some bad links. I thought I had gotten them all but apparently not.
this is a drawback of not being able to test things until after stuff
is done. In any case, I grepped through everything and this takes
care of it.
(From yocto-docs rev: cdbc3b3b7f6d6ff01024b977f966459cf414ad5c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several manuals and areas were still referring to 'glibc' as the
GNU version of the Unix statndrd C library. We do not support this
any longer and now use 'eglibc' to build with. Notable changes were
in the required packages area of the QS manual. I also added a
bit in the reference guide saying how this release does not use
'glibc' to build with but rather 'eglibc'.
(From yocto-docs rev: c2c58914996d747c510706d78ecfd8f41c5e694d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren provided me with some feedback on the logging mechanism
section for both Python and Bash.
(From yocto-docs rev: 7dddadf8caba01d3ef1046be52a1435eeaed60a3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This machine is out of date. I replaced both occurences with
"qemux86", which is more relevant to YP.
(From yocto-docs rev: 8fe6feccc25f594a444b5177d1192899b3cbdd9c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Per Darren's feedback on this new section I updated changes based
on his comments.
(From yocto-docs rev: a5bbba42ec0da5b2f83f7a64ac8eef466e9c89b3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The -b option is not required to show the environment used to build a
specific package; usually the best practice is to specify the package
name alone.
(From yocto-docs rev: d59772fd7edd76dbc8018479c072badb591601c3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added emphasis to a bulleted list and I also updated a section title
to reflect Yocto Project instead of Poky.
(From yocto-docs rev: f967aff5c0a0047ef44145c6a95da84e57c255b1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Each of these chapters needed the title changes to reflect Yocto
Project and not Poky.
(From yocto-docs rev: a6d8d01b20af334ca9950c4287d61a728532f652)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
General re-write to make the chapter Yocto Project friendly.
Weeded out the references to "Poky."
(From yocto-docs rev: ac4fc6082f458e5ee60962693ee332bbf1e3c1a9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
YOCTO #1001 - created a new section to address this issue. This is the
first draft. Darren to provide review comments.
(From yocto-docs rev: fc2aee572cc3e620684533a12a2d8436dc0abe32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the PDF version of the manual the "‐‐" docbook statement
does not display correctly. I changed this to "--".
(From yocto-docs rev: b0596e0ce370d6c6e1680e89d9c5a5b9da26dd93)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the section 2.1.1 BitBake I added a paragraph at the end of the discussion
about BitBake explaining the benefits of the '-k' and '--continue' options.
(From yocto-docs rev: 409e01cedbe8d93c29856fa2a49d5f9db91f5201)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In chapter 2 where we talk about building images I added a new
note indicating that the user should not switch around using different
GPL versions when trying to rebuild an image as it can cause dependency
failures.
(From OE-Core rev: f84441dbcc8254062d55d2452d3d6f4bc6f907fe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 873] - Added a note in the Images Appendix indicating that
building an image without GPLv3 components is only supported for
base and minimal images. Also put the two changes you have to do
to the local.conf file for the build.
Added a note in the second chapter in the section on building images.
The note indicates the same as in the appendix but does not go into the
local.conf file detail.
(From OE-Core rev: c7960a2e820d7ddb8649ab0b27b3f04843f7af0d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made some minor edits.
(From OE-Core rev: bb6fbb484ec912aabca77fd4d124c97fc7f956e1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Forgot to search for "Bitbake" occurances. These are now changed
to "BitBake."
(From OE-Core rev: 982826b61bf68244fad46ef52b5a203e648e330b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed a grammar problem and then did a search and replace for
"bitbake" to replace with "BitBake".
(From OE-Core rev: a25074cf7f3383ea3963c4dabb9507af34f2e3df)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I am using "xxxxxx" task as the way to call out a specific task in the
text. Previously a mix of <function>xxxxxx</function> and the "xxxxxx"
methods were being used.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Removed a couple of redundant </ulink> tags.
Also indented the literallayout text by five spaces for formatting.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I completed general edits to the second chapter of the poky reference
manual. These edits went from section 2.4.5 through the end of the
chapter. They consist of text rewrites for more active voice and follow
general technical writing principles.
I completed the same types of edits in the third chapter of the manual
from the beginning through section 3.3.2.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Extensive language and consistency edits being applied to the manual.
During the 0.9 push I did not have time to make a pass through the
document.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark
Paul Eggleton
Richard Purdie
Richard Purdie