Remove unnecessary dependency via configure option and make oprofileui use GIO
(From OE-Core rev: ad5481f6348d1bc504729efd4321bf1fcac4083b)
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Systemtap only supports x86, x86-64 and powerpc at this point.
v2: updated to reflect comments from Koen Kooi and Phil Blundell to use
COMPATIBLE_HOST instead.
(From OE-Core rev: 835d817f1ba7b99167743fdb86ba80f3a07bd82d)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREV to fix a bad commit which resulted in the
tree being dirty after checkpoint, and hence a failure during the
patch phase. The meta commits never modify code outside the 'meta'
directory tree, a rule that was broken with this bad commit.
Without this fix, you may see an error like:
| [INFO] doing kernel configme
| [INFO] Finding user(s) of branch "yocto/standard/fsl-mpc8315e-rdb"
| [INFO] Branch meta-temp used by fsl-mpc8315e-rdb-standard.scc
| [INFO] collecting configs in ./meta/meta-series
| [INFO] checking out yocto/standard/fsl-mpc8315e-rdb
| error: Your local changes to the following files would be overwritten by checkout:
| arch/powerpc/boot/dts/mpc8315erdb.dts
| Please, commit your changes or stash them before you can switch branches.
| Aborting
| [ERROR] Checkout of yocto/standard/fsl-mpc8315e-rdb failed
| Error running the meta series for collecting config data
| config of meta-temp (fsl-mpc8315e-rdb-standard.scc) failed
(From OE-Core rev: 09e7b0535f8f2f287da670aabd1d6db76b90686f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing recipe names for the linux-yocto kernel builds
worked well when there was a single, or two versions of the
kernel available. But with the impending kernel updates and
retirement of older kernels, the re-use of the same recipes
for different kernel versions violates the principle of least
surprise.
To address this, the recipes are being renamed as follows:
linux-yocto_git.bb -> linux-yocto_2.6.37.bb
linux-yocto-stable_git.bb -> linux-yocto_2.6.34.bb
There continue to be versionless recipe names that feed into
versioned recipes at the appropriate points. They are:
linux-yocto-dev.bb (tracking the latest yocto dev kernel)
linux-yocto-korg_head.bb (tracking korg kernels)
There are no existing users of linux-yocto-stable in the master
branches to convert to the new naming, so these changes work
in isolation.
(From OE-Core rev: 576c87349a72a94357014ff29f55db692903ed80)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There doesn't appear to be any terribly good reason for kexec-tools to
depend on the kernel. (I verified that kexec-tools is buildable in a
clean TMPDIR without having previously built virtual/kernel.)
Having this dependency in place is a nuisance because it makes it
awkward to put kexec into an initramfs. So, it seems like we would be
better off without.
(From OE-Core rev: ba6da75657d0bf9ed48f0d6c4132f12993648e7a)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During work on 1.1 BSPs, some driver options changed. The
result was that the upstream fix b1d670f10e8078485884f0cf7e384d890909aeaa
needs to be available for all BSPs.
These SRCREV updates are the result of making that commit common.
(From OE-Core rev: c5dddf2dec0c6aed1db44a7ecf14d13502759d03)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This SRCREV update picks up the following changes from the
2.6.37 kernel tree:
- fishriver: create and use a dedicated BSP branch
- fishriver: usbnet fixes, but common to all boards
- standard: update omap baseline match the 2.6.34
upstream merge content
Built and boot tested on qemu*
(From OE-Core rev: 0843f22d34c0c9d2424a595aea0a2410e7d6ce23)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As a keyword, Upstream-Status is case sensitive.
(From OE-Core rev: 874038469e28d011b60b2d4bfd5a6fada6e754c4)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing PACKAGE_ARCH = "all" mechanism of sharing packages is problematic
with sstate since there are a variety of variables which have target specific
values and the sstate package therefore correctly changes signature depending
on the MACHINE setting.
This patch creates a new "allarch" class which sets:
PACKAGE_ARCH = "all"
(as per the existing convention)
INHIBIT_DEFAULT_DEPS = "1"
(since its not target specific and therefore can't depend on the cross
compiler or target libc)
TARGET_ARCH = "all"
TARGET_OS = "linux"
TARGET_CC_ARCH = "none"
(since these variables shouldn't change between the different packages and
target compiler flags shouldn't be getting used)
PACKAGE_EXTRA_ARCHS = ""
(since we shouldn't be depending on any architecture specific package architectures)
Not all PACKAGE_ARCH = "all" recipes can use this class since some run configure
checks on the compiler. This means they have target specific components and therefore
the "all" classification is incorrect.
(From OE-Core rev: 26e5e5feb695864b11e47e24017e254c28f14494)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added following variables for PR service:
USE_PR_SERV: flag of whether to use the network PR service
PRAUTOINX: search index for the network PR service
PKGE/PKGV/PKGR: epoch, version and revision used in package feed.
EXTENDPKGV: full package version string used in package relationships.
For the following recipes, replace EXTENDPV with EXTENDPKGV:
udev, xcb, xorg-proto, util-macros and linux-libc-headers
then removed the unused EXTENDPV and EXTENDPEVER variables
Users should use EXTENDPKGV instead for package feed generation.
(From OE-Core rev: ad00ad1d530074dc3a0f3376f96ad5a88a7b24e2)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes bug: [YOCTO #1035]
Fixes bug: [YOCTO #1036]
Fixes gcc 4.6.0 compliation issues by importing the upstream change:
Author: Michal Marek <mmarek@suse.cz>
Date: Mon May 2 12:13:01 2011 +0000
kbuild: Fix passing -Wno-* options to gcc 4.4+
Starting with 4.4, gcc will happily accept -Wno-<anything> in the
cc-option test and complain later when compiling a file that has some
other warning. This rather unexpected behavior is intentional as per
http://gcc.gnu.org/PR28322, so work around it by testing for support of
the opposite option (without the no-). Introduce a new Makefile function
cc-disable-warning that does this and update two uses of cc-option in
the toplevel Makefile.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
(From OE-Core rev: 1d4c9412fb8226f882ef68223c9c5ec08cc2f5cc)
Signed-off-by: Michal Marek <mmarek@suse.cz>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Integrated-by: Bruce Ashfield <bruce.ashfield@windriver.com>
:100644 100644 0ef00bd... 1d8e7e9... M Documentation/kbuild/makefiles.txt
:100644 100644 7bd863e0.. 74bac80... M Makefile
:100644 100644 ed2773e... ba25c44... M scripts/Kbuild.include
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a BSP or layer specifies an AUTOREV for SRCREV, the logic
that matches expected vs real branch heads doesn't apply. We
always want the latest.
To solve the issues with invalid git revs causing validation
failures, we detect the AUTOINC value and do a early return,
skipping validation.
(From OE-Core rev: b4f1845f7cf42059984112e3f41a323b4c9d6dfd)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python: update upstream-status for patches
binutils: update upstream-status for patches
gcc 4.5.1 4.6.0: update upstream-status for patches
autoconf: update upstream-status for patches
automake: update upstream-status for patches
bison: update upstream-status for patches
distcc: update upstream-status of patches
fstests: update upstream-status for patches
gdb: update upstream-status of patches
intltool: update upstream-status of patches
libtool: update upstream status of patches
linux-libc-headers: update upstream-status for patches
make: update upstream-status for patches
perl: update upstream-status for patches
python-pycurl: update upstream-status for patches
python-pygobject: update upstream status for patches
python-pyrex: update upstream-status for patches
quilt: update upstream-status of patches
tcl: update upstream-status for patches
gnu-config: update upstream-status for patches
gmp: update upstream-status for patches
(From OE-Core rev: a62fa9b213b09bf48c48499d2e3c66a9ee306deb)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes bug: [YOCTO #955]
Updating the SRCREV to pickup the kern-tools change:
[
updateme: error if features are not found
Rather than silently dropping addon features, we emit a warning
and then exit with a failure code. The caller can then abort a
build and not simply miss features.
Passing --no-strict to the script disables this new functionality
if for some reason a feature description is missing on purpose.
]
(From OE-Core rev: d7f3e91c15328440ffbf501c502098133fd34d3a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tcf-agent: update its patch's Upstream-Status
screen: update its patch's Upstream-Status
which (GPLv2): update its patch's Upstream-Status
gnome-vfs: update its patch's Upstream-Status
libart-lgpl: update its patch's Upstream-Status
librsvg: update its patch's Upstream-Status
fontconfig: update its patch's Upstream-Status
freetype: update its patch's Upstream-Status
libxsettings-client: update its patch's Upstream-Status
libxcb: update its patch's Upstream-Status
libx11: update its patch's Upstream-Status
- remove 2 unused xim.patch.
libx11-trim: update its patch's Upstream-Status
libxcalibrate: update its patch's Upstream-Status
libxcomposite: update its patch's Upstream-Status
libxfont: update its patch's Upstream-Status
xtrans: update its patch's Upstream-Status
- remove abstract_socket_fix.patch as it's not used at all for long.
calibrateproto: update its patch's Upstream-Status
latencytop: update its patch's Upstream-Status
powertop: update its patch's Upstream-Status
settings-daemon: update its patch's Upstream-Status
gnome-settings-daemon: update its patch's Upstream-Status
libxklavier: update its patch's Upstream-Status
liblbxutil: update its patch's Upstream-Status
oprofile: update its patch's Upstream-Status and remove an unused patch
- delete xml_callgraph_details.patch as it's not used at all.
(From OE-Core rev: 94991fb73586887bfc740eacf190032dfb206a65)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are valid reasons to build repositories without meta
data present and there are times when this is an error. This
change adds sanity tests to the build process to detect missing
meta data and throw an informative error message.
Sanity checking is only triggered from recipes (linux-yocto)
that always require meta data to be present. Other recipes
are not impacted and can auto-generate meta data as required.
Without this change the build process suceeds, but incorrect
meta data will be used (with no user knowledge), which is not
the desired behaviour.
(From OE-Core rev: adf9f92e2f8f6cc3deba72a194ded85e160ad9e3)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The machine configuration of the non-core (non-qemu) machines
exists in other layers. Moving the branch mappings, compatibility
and SRCREVs of these machines out of the main linux-yocto recipe
is the first step in that move.
(From OE-Core rev: 9187ac0173f26c6a621229ff588f495e9967e665)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We provide alternative implementation of sched_getcpu()
when compiling for uclibc
(From OE-Core rev: 03f442250579a392b49b54648840fbeb7c0a0142)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the linux-yocto/2.6.37 SRCREVs to pickup:
perf tool: Fix gcc 4.6.0 issues
1/1 [
Author: Kyle McMartin
Email: kyle@mcmartin.ca
Subject: perf tool: Fix gcc 4.6.0 issues
Date: Thu, 5 May 2011 00:06:01 -0400
commit fb7d0b3cefb80a105f7fd26bbc62e0cbf9192822 upstream.
GCC 4.6.0 in Fedora rawhide turned up some compile errors in tools/perf
due to the -Werror=unused-but-set-variable flag.
I've gone through and annotated some of the assignments that had side
effects (ie: return value from a function) with the __used annotation,
and in some cases, just removed unused code.
In a few cases, we were assigning something useful, but not using it in
later parts of the function.
kyle@dreadnought:~/src% gcc --version
gcc (GCC) 4.6.0 20110122 (Red Hat 4.6.0-0.3)
Cc: Ingo Molnar <mingo@redhat.com>
LKML-Reference: <20110124161304.GK27353@bombadil.infradead.org>
(From OE-Core rev: efc68af7259b4bcbb1e03a090128289a7cdc7944)
Signed-off-by: Kyle McMartin <kyle@redhat.com>
[ committer note: Fixed up the annotation fixes, as that code moved recently ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[Backported to 2.6.38.2 by deleting unused but set variables]
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[Backported to linux-yocto kernel git version]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The BSP bootstrap and -dev use cases can be applied against
unbranched or repos without meta data. To allow the proper
and safe processing of those repositories, slight modifications
to the tools are required to pass the branch on the command
line (rather than detecting it always) and to only checkout
branches that exist.
(From OE-Core rev: ae754be8b43677604a853ec6f62b2490a91d8836)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To support quick uprev and testing, it is desireable to build
repositories that do not have embedded meta data. In this scenario
the meta data can be automatically created or provided externally.
This commit supports the first situation by detecting the lack
of meta data and then automatically creating a base set of meta
files.
(From OE-Core rev: 32c56cd6a5756f21d19d8a32239b783a7854aed3)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
in this case, those non poky distro can also use these recipe normally
(From OE-Core rev: 0a57bd226cdb8332707fa0f46fcf0b067f03701a)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Perf wants elfutils and elfutils on uclibc does not work due to
its usage of obstack_printf functionality missing from uclibc.
(From OE-Core rev: 8c2154fd5be3b7a633d87a23a1beffe9ce45c123)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Turn these off for now to avoid the host infection issues for perf.
Fixes yocto [BUGID #994].
(From OE-Core rev: 51cf1ecab860269b3d822e2e372756b8bb8ffe26)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated LIC_FILES_CHKSUM as a new Copyright holder was added.
Removed the patch since 0.12 has integrated that.
Added arm into COMPATIBLE_HOST as 0.12 can build on arm now.
(From OE-Core rev: 43e450fcc005e44801c263de038fd5635cd426ab)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the current state, udev init script is loaded as 3rd and modutils.sh as
20th, so udevadm called in udev init script loads all kernel modules in some
unpredictable order, not honoring in any way specified order of modules in
/etc/modules. This causes some troubles mainly in the first boot. So to fix
this we now move loading of the kernel modules just before we exec udev init
script. Example of the current state:
Starting udev
rtc-m48t86 rtc-m48t86: rtc core: registered m48t86 as rtc0
rtc-m48t86 rtc-m48t86: battery ok
ep93xx-rtc ep93xx-rtc: rtc core: registered ep93xx-rtc as rtc1
root@ts72xx:~# cat /etc/modules
rtc-ep93xx
ohci-hcd
ts72xx_sbcinfo
rtc-m48t86
As you can guess, this is really wrong behaviour, because I've rtc1 as the
main time source for my system.
root@ts72xx:~# cat /etc/default/hwclock
HWCLOCKACCESS=yes
HWCLOCKDEVICE=/dev/rtc1
Expected behaviour with this patch applied:
Please wait: booting...
ep93xx-rtc ep93xx-rtc: rtc core: registered ep93xx-rtc as rtc0
usbcore: registered new device driver usb
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
...
rtc-m48t86 rtc-m48t86: rtc core: registered m48t86 as rtc1
rtc-m48t86 rtc-m48t86: battery ok
Starting udev
(From OE-Core rev: a0629aa0dc55829565b7ab1725875eac065ab2f1)
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(based on http://patches.openembedded.org/patch/1917/)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The configuration chunks for profiling and latency top have
been enabled in tree now, so we can drop optional feature
additions in the recipe itself.
build tests show identical configurations.
(From OE-Core rev: 0f69382ac1eea1dea05581c29cf66e3214f0bd74)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In mirrors.bbclass we point into /pub but we don't in bitbake.conf.
All uses of KERNELORG_MIRROR look into /pub anyhow, so lets make
use of that.
(From OE-Core rev: 67a0c8f48b5ef2ae5fc712c9204e4e99818c8134)
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing infrastructure uses an external build tree which references the
kernel source in the work dir. If run with rm work, building external modules
will fail.
This patch places a configured source tree in sysroots. Striking a balance
between minimal size and minimal maintenance is difficult. A fully configured
tree is about 500MB after a clean. This version leans on the side of caution and
removes only the obviously unecessary parts of the source tree to conserve
space, resulting in about 170MB. The arch directories would be some additional
pruning we could do. Given examples from the devel package from distributions, I
suspect this size could be reduced to 75MB or so, but at the cost of a much more
complex recipe which is likely to require a great deal more maintenance to keep
current with kernel releases.
Care is also taken to clean the hostprogs in scripts, and the modules are
responsible for building them as needed. Although it is unclear to me if this is
really necessary, especially considering that modules put these bits back as
soon as they compile. If we are not generating an sstate package, I suspect we
can ignore these.
Please try this with your modules and let me know how it does. I tried to take
non linux-yocto kernel recipes into account, but I have only tested with
linux-yocto and the hello-mod recipe so far.
(From OE-Core rev: a9d41062e24a6b99661b3a5256f369b557433607)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Koen Kooi <koen@dominion.thruhere.net>
Acked-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Zhai Edwin
Tom Zanussi
Bruce Ashfield
Dexuan Cui
Phil Blundell
Saul Wold
Richard Purdie
Lianhao Lu
Yu Ke
Nitin A Kamble
Adrian Alonso
Khem Raj
Paul Eggleton
Petr Štetiar
Tom Rini
Darren Hart