If there is a directory matching a wildcard in SRC_URI when getting file
checksums, we should recurse into that instead of producing an error.
(Bitbake rev: ae87b7eb414e3d5eefd2effec7b30c22d2186b02)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Local fetcher's localpath is returning the parent directory for a
wildcard match; we need to handle this and add the wildcard
specification so that we checksum the correct files.
Fixes [YOCTO #6127].
(Bitbake rev: 4a90edd62c16cbf41b5b93280e155077564c774a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, if a file listed in SRC_URI was missing at the time of
parsing, and then was added and bitbake run again, it would not be
picked up because the recipe was cached without it. If we allow the file
to be added to the list of files to checksum, then it will be checked
for and found on the second run.
Fixes [YOCTO #4790].
(Bitbake rev: 71da822762cb298261cccdfa54b9c0fea02c3c5d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For a while its been puzzling me why connman-gnome rebuilds as often as it
does. It turns out you can trigger this with a new checkout of the metadata.
The SRC_URI that is causing the problems is:
SRC_URI = "file://images/*"
and rather oddly the results in checksums for a file "." being added to
the tree, e.g.:
('.', 'ab48a68186f0e0f277c21ef4cb390b4b')
The problem is that when iterating files lists, the checksum variable can
become set yet we don't break the out from the for loop, which leads to
odd (and non-deterministic) entries being added into the file checksum list.
The exact item added probably depends on the order of items on the disk.
Before this change, bitbake-diffsigs on connman-gnome:do_fetch would report:
This task depends on the checksums of files: [
('connman-signal-03.png', 'f6c16aee57b37b73793a2f1dea433ffa'),
('connman-signal-02.png', 'ad0cd22710c097d8174121fc1023c3be'),
('connman-signal-01.png', '8842bd83d2fa9ba56480df34c727c629'),
('null_check_for_ipv4_config.patch', 'a23271e41c9fe81551244d875106af10'),
('connman-signal-05.png', '808589e7e8d502b44c7b007e9e68d48c'),
('connman-signal-04.png', 'ab48a68186f0e0f277c21ef4cb390b4b'),
('null_check_for_ipv4_config.patch', 'a23271e41c9fe81551244d875106af10'),
('0001-Removed-icon-from-connman-gnome-about-applet.patch', 'e2d8269357c1e8c84291606da24eea85'),
('0001-Removed-icon-from-connman-gnome-about-applet.patch', 'e2d8269357c1e8c84291606da24eea85'),
('.', 'ab48a68186f0e0f277c21ef4cb390b4b')]
Afterwards:
This task depends on the checksums of files: [
('connman-signal-03.png', 'f6c16aee57b37b73793a2f1dea433ffa'),
('connman-signal-02.png', 'ad0cd22710c097d8174121fc1023c3be'),
('connman-signal-01.png', '8842bd83d2fa9ba56480df34c727c629'),
('null_check_for_ipv4_config.patch', 'a23271e41c9fe81551244d875106af10'),
('connman-signal-05.png', '808589e7e8d502b44c7b007e9e68d48c'),
('connman-signal-04.png', 'ab48a68186f0e0f277c21ef4cb390b4b'),
('null_check_for_ipv4_config.patch', 'a23271e41c9fe81551244d875106af10'),
('0001-Removed-icon-from-connman-gnome-about-applet.patch', 'e2d8269357c1e8c84291606da24eea85'),
('0001-Removed-icon-from-connman-gnome-about-applet.patch', 'e2d8269357c1e8c84291606da24eea85')]
which is correct and deterministic without the "." entry.
(Bitbake rev: f9416e76e272ba3249abff099f6f3a47fe82e03e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When setting the username after already having set the password, the password
was unexpectedly reset. This change fixes this issue and introduces unit tests
to make sure it doesn't happen again.
(Bitbake rev: 25faef3a047f9c7564089463d7c96f6910b640cb)
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a case in meta-intel where a SRC_URI contains both a query string and
URI parameter:
https://edc.intel.com/Download.aspx?id=6190;downloadfilename=LIN_IEMGD_1_14_GOLD_2443.tgz
Python's urlparse thought the URI parameters were part of the query parameter
value, but in the bitbake context this is obviously not the case. As bitbake's
usage isn't really RFC compliant, we have to extract and remove the URI parameters
*before* urlparse sees the URI.
(Bitbake rev: c2f27ae4271985b48f957747b6ea372c8699cb49)
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change introduces the .query property of the URI class. It is a
read/write dict of the parameters supplied in the query string of the
URI. E.g.:
http://example.com/?foo=bar => .query = {'foo': 'bar'}
(Bitbake rev: 1cb2b3c458c8c5521591d2c8f2e0058143fc77bb)
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some of the previous cleanups broke the downloadfilename functionality.
This change fixes the code to ensure the commandline is correctly built.
Thanks Kristof Robot <krirobo@gmail.com> for reporting the issue.
(Bitbake rev: e008d9bb07e5d1a3584cc04ca2cd3dd906fd5759)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The svk fetcher never appears to be used by anyone and the development
on svk appears to have stopped in 2010. We might as well drop support
for it.
(Bitbake rev: 8239264753977bd06ad5b1b574245d3842af489b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These two functions have little in common, separate them out.
(Bitbake rev: 7413e0fa4dca9571ea98f32dab87d4fd60bc8de9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Start to clean up wget fetcher command construction to allow clearer
and more extensible code structure. Drops support for ${URI} and
${FILE} directly in the commands.
(Bitbake rev: 4e59fe45be2088996abc21e9a631a32b9a9642c9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These variables were dropped from OE-Core some time ago, drop their
usage from the fetcher as well.
(Bitbake rev: bd33e709ab65d6966b234010641861834d170e2b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Clean up some horrible old code and drop usage of the old style *COMMAND
variable and MKTEMPDIRCMD whilst in here. This means we don't need to touch
OVERRIDES either.
(Bitbake rev: c127bb3a9b7b1d2ab2c833ff73186b6ead0dc29c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Clean up some horrible old code and drop usage of the old style *COMMAND
variable and MKTEMPDIRCMD whilst in here. This means we don't need to touch
OVERRIDES either.
(Bitbake rev: 6b79789769da160d0e7fca0f9c6044dc1e11a107)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is other code which can want to run ls-remote style commands with
different parameters so split out the function.
(Bitbake rev: 13f1138f5504feee0ee8e8f3a0675d0bea490351)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Git versions older than 1.7.10 put absolute paths in configuration files
for the submodule repositories, leading to errors when the repository
checkout is moved. We move the repository as a matter of course in the
gitsm fetcher; the failure occurs in do_unpack). Change the absolute
paths to be relative during processing to fix this.
(At the time of writing, Ubuntu 12.04.4 LTS ships Git version 1.7.9.5,
hence the desire to fix this rather than just mandating a newer Git
version.)
Fixes [YOCTO #5525].
(Bitbake rev: e700d5a41deed4ee837465af526ed30c8a579933)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A typo was meaning that the mirror creation method wasn't being called
when it should have been. Fix the type to fix mirror tarball creation.
[YOCTO #5284]
(Bitbake rev: 348971d410bfd5d8b1757468d73e1d24ae78a594)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I can't think of a reason we'd download zero sized files however there are
reasons zero length files can accidently make it onto source mirrors.
This check allows us to ignore the broken files and switch to another
mirror rather than fail with odd checksum failures.
(Bitbake rev: 300cba2e1a720dba4b83b0c76208ea93c608c1de)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to deference tags when trying to map them to commit IDs with
ls-remote. If we don't do this, a given commit might not show up
later in a specific branch. There appears to be no good reason not
to do this.
(Bitbake rev: 8ef24f4c834298348172b96ec0b855bf09552b09)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When specifying tags, they're searched for unanchored so foo/bar could
match:
refs/heads/abc/foo/bar
refs/heads/xyz/foo/bar
refs/heads/foo/bar
This change anchors the expressions so they are based against heads
or tags (or any other base level tree that has been created).
(Bitbake rev: df2e0972cd1db7abd5ec8b7cb295fb0c42e284a4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current message can be ambiguous, improve it (and also rename a
variable to clean up the rest of the function).
(Bitbake rev: 0c1bb7c0fce7b0f334311a2893ccb00385fa8d55)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a sanity check so that if some SRCREV is set and a rev parameter is given
to the url, the revision given should match.
Any tag parameter behaves the same as rev. If both are specified, error to
tell the user we're confused rather than do something which may or may not
be what they intended.
Also add some unittests for this.
(Bitbake rev: e82a4ab48991035866da9914c8b75a9bfbc9a7fc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently INVALID and None are checked as incorrect values under different
circumstances. This code standardises those checks to be consistent. We
should phase out the use of "INVALID".
(Bitbake rev: 86ef4e65ce18b71dc69643586bd2aa8f48703171)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The fetcher will try:
1) PREMIRROR
2) Upstream
3) MIRROR
If it fails to download from the Upstream, but succeeds from the MIRROR,
and ud.localpath != origud.localpath (for example, the git tarball),
then we will get the error (e.g.: xf86-video-omapfb):
ERROR: Function failed: Fetcher failure for URL: 'xxx'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /path/to/log.do_fetch.28024
It should not show the error and let the build go on since it succeeds.
(e.g.: xf86-video-omapfb)
[YOCTO #5686]
(Bitbake rev: c08ca1e4eeb04f78e1354780cf5a4c3855e49572)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows FETCHCMD_git to override the fetcher command as the git fetcher does.
[YOCTO #5717]
(Bitbake rev: 23ab943be3a33077d6ad8be68bba53cd1e2270b4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* currently decode_url regexp parses branch=@foo as username so it ends like this:
- ('git', '', 'foo', 'git.openembedded.org/bitbake;branch=', '', {})
+ ('git', 'git.openembedded.org', '/bitbake', '', '', {'branch': '@foo'})
* http://hg.python.org/cpython/file/2.7/Lib/urlparse.py also assumes
that there is at least one '/' as separator between netloc and path,
params, so it looks reasonable to prevent including '/' in username
(Bitbake rev: 2c82742114091cb55055328b54223686816582f2)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This code clearly uses an earlier fetcher API. Update it to match master.
(Bitbake rev: e13acb4113ce75226664c3006a9776cc885e860d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This add a Git Annex backend which reuses the Git fetcher code; it
allows managing files with git, without checking the file contents
into git, being useful when dealing with files larger than git can
currently easily handle, whether due to limitations in memory, time,
or disk space.
(Bitbake rev: a61fc4db598e9d13c966712a6a0e4783e19448be)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For rebased git tree, some commits doesn't exist in any branch, and such commits are
valid in tag, the change is useful for such case.
(Bitbake rev: f594cb9f5a18dd0ab2342f96ffc6dba697b35f65)
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a problem:
$ bitbake xf86-video-omapfb -cfetch && bitbake xf86-video-omapfb -ccleanall
Everything should be removed, but the
0006-omapfb-port-to-new-xserver-video-API.patch.done still exists in the
DL_DIR, this is because the clean() in the fetch2/__init__.py skips
removing the local file, so that it will skip removing the .done.
The local file (file://) isn't needed to be removed since it is not
downloaded into DL_DIR, but the .done should be removed, this patch will
remove the .done, and it doesn't remove anything else since the clean()
in local.py does nothing.
[YOCTO #5687]
(Bitbake rev: 2bc99b9dfa532430a13c39fca4e5ef3a2206b3b8)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a problem:
$ bitbake xf86-video-omapfb -cfetch && bitbake xf86-video-omapfb -ccleanall
The git2_git.pingu.fi.xf86-video-omapfb.tar.gz has been removed from the
DL_DIR, but the git2_git.pingu.fi.xf86-video-omapfb.tar.gz.done still exists,
this is because the "open(ud.donestamp, 'w').close()" in try_mirror_url() will
create the git2_git.xxx.tar.gz.done, but no one removes it (the clean() in
fetch2/__init__.py removes the DL_DIR/git2/pkg.done)
This only happens on the git fetcher AFAIK.
[YOCTO #5688]
(Bitbake rev: fb2dc84875eb477661f421b21bc404d4805ce379)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A part of fetch2/__init__.py uses 3 spaces as the indent, I
think that they should be typos.
(Bitbake rev: abafd85e2fcf23cee872e0e9e468898101430f1f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because of the way we were handling this error, it was printed twice -
once via logger.error() (to avoid the log being printed) and a second
time when the exception gets wrapped in a FuncFailed at a higher level.
Call logger.error() earlier and change the text we send in the
exception to be more brief, so it more closely resembles the behaviour
when there is an invalid checksum.
(Bitbake rev: 46765369d7f76ec7f67b90430131a79eb6a66235)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were checking SRC_URI md5sum/sha256sum values against None here, so
if they were set to "" then no error was produced. Since the value is
still effectively unset in this case, this is not the right behaviour;
just check if the value doesn't evaluate to False instead.
(Bitbake rev: 040943a718795c64dc4e604abfcf08b26b7d00e6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The basecmd is initialized in urldata_init; there's no need redoing that
work.
(Bitbake rev: f8df6f746fb2e27f029a5449cee6c891b1f36f4f)
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the fetcher doesn't distinguish between names that the fetcher
needs to resolve verses branch names that the user specified.
This meant that if you specify a tag and a branch, the fetcher broke. This
separates the two so that the branch name is preserved and can be used in
appropriate places.
(Bitbake rev: e85f39fe9d1b224414b5da0780da514f75c5df92)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The fetcher made the rather bold assumption that if it fetched from the upstream,
the revisions were present and correct. These checks are fast and ensure that
really is the case. The avoids accidental network accessed and missing
branch configuration problems.
(Bitbake rev: a9112a102a89049cda597dad449e922c9e957a5d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In 6a48474de9505a3700863f31839a7c53c5e18a8d the url parameter to a
number of functions was removed. However, not all calls to
latest_revision() were fixed...
(Bitbake rev: 7c94ca56b2fd85a989089f58b3dcce3172a778f2)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With a SRC_URI = " \
p4://depot/folder/...;module=localfolder/localsubfolder;changeslist=${P4CHANGELIST} \
"
the subfolders of //depot/folder/... get renamed when mapped to the
local folder structure. They lose the first 3 letters. This
patch fixes that.
Issue reported by and patch sent from katutxakurra@gmail.com
[YOCTO #5380]
(Bitbake rev: 40e06dc459d9c0b5d42d65b2d2c846196fd36b1f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no good reason to keep passing around the url parameter when
its contained within urldata (ud). This is left around due to
legacy reasons, some functions take it, some don't and its time
to cleanup.
This is fetcher internal API, there are a tiny number of external users
of the internal API (buildhistory and distrodata) which can be fixed up
after this change.
(Bitbake rev: 6a48474de9505a3700863f31839a7c53c5e18a8d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
urldata contains the url so we might as well stop passing around
pointless function parameters. This was done for legacy reasons but
its time to clean this mess up.
This is a first step in cleanup and is a standalone patch but there is
more to be done in a second patch.
(Bitbake rev: 06590cfebbcf6565a17b80cc298e3ecdfaba4656)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If an SCM mirror is in PREMIRRORS, the tarball is downloaded and then found
by the "upstream" check and handled correctly.
If an SCM mirror is in MIRRORS, the tarball is downloaded but not used
since there is no "upstream" run after MIRRORS completes. It therefore
sits there useless and unused. This code change forces the upstream to
run after a mirror tarball is found and fixes the usage of SCM mirrors
in MIRRORS.
(Bitbake rev: a66ee0994645aa5658b2f5ea134ed17d89f8751a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using git merge-base for checking for ancestors is nice but required git 1.8.0
which is not in many distrbutions yet. We therefore revert to a more ugly
check using git branch --contains until such times as we can upgrade.
(Bitbake rev: 31467c0afe0346502fcd18bd376f23ea76a27d61)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current use of git log to check if a given revision is present can be
a little fragile.
For example if revision X was on branch A, and then later added to branch
B, the update checks would not notice this since they just check for X
being in the repository.
We also had some autobuilder corruption where an older packed-refs file
was copied over a new repository containing newer pack files. There
was no update to the refs file since the revision was present but
not accessible in any branch.
The correct fix is to check that the required revisions are present
on the specific branches. This patch does this using merge-base.
(Bitbake rev: 89abfbc1953e3711d6c90aff793ee622c22609b1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Trying to use a server with username and password authentication
within the URL of the SRC_URI variable doesn't appear to work.
This patch adds the missing parts to the hg fetcher to make this
work properly.
(Bitbake rev: dc3d6d73e44802c203b3f7247f6f212acc2f69bf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have faced a corner case situation where the 'last changed
revision' returned from svn info is wrong. It happens when the last
revision is a directory move. e.g. if we assume that the svn
repository at revA has root/x/y/z/foo/bar and it is moved to
root/a/b/c/foo/bar in revB, then svn info 'last change revision' will
return revA. As such when using AUTOREV, we are going to attempt to
retrieve root/a/b/c/foo/bar (as per SRC_URI) but at revA when it did
not exist.
So this patch changes how we retrieve the latest revision and uses
'svn log --limit 1' which gives correct result in all tested cases.
(Bitbake rev: 17d8ef0b813a05c231e3dbe6e8bc82a4a9b1d2f8)
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a file ends with .xz, it currently gets overwritten during unpack:
The decompress command for .xz files is:
'xz -dc %s > %s' % (file, efile)
and as efile == file, we end up overwriting file (the source).
Fix this by adding .xz to the list of suffixes that that need to
be removed from a file name for an extract command, leaving the
bare file name. Now, for a given file foo.xz,
file == foo.xz and efile == foo, similar to how .gz .bz2 and .Z
files are treated.
(Bitbake rev: 2cd2d0a48e12ab4358fb967eaf7a56c17993f48d)
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BB_NO_NETWORK can be set by bitbake internally by the use of
BB_FETCH_PREMIRRORONLY so update the error message to give users a
hint about this.
[YOCTO #3222]
(Bitbake rev: cac3060d0bf8c7deeacda18d06d92787911380d0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
AUTOINC was meant to appear once at the start of the version string.
The list of names may not be sorted meaning it could get inserted in
the middle. This patch simplifies the code and ensures it appears at
the start.
Include cache version bump to ensure the cache picks up these changes.
(Bitbake rev: ad8bf10d873abb94d987860a3f6d06b134fb8a99)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The assignment to True was missing from the code, well spotted Saul!
(Bitbake rev: e493fe8cb4953935f01361ffc0240e5818ebb283)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The long srcrevs are mainly used or the workdir construction as well as
the package version. The long entries are hashes generated by the git fetcher
and other scms using a similar revision mechanism.
We need these to change when the package changes however collisions are
unlikely to happen within the domains we care about. The long revisions
have generated negative user feedback due to the use in path and file
names.
This patch therefore truncates the revisions to 10 characters maximum.
This should be safe in the contexts where these revisions are used as
the chances of spatially close collisions is very low (distant
collisions are not a major issue in the way we use these).
(Bitbake rev: 43a8319cda7fae37862dae323eeb24cb39ca21b7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now we no longer try and provide increasing values from the fetcher,
we can simplify the function structure for the sortable_revision
pieces and move the AUTOINC handling directly into the function
which needs it, simplifying the code.
(Bitbake rev: fb068bee47bb1a06f02447daf16c2b2a79c03288)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move various random imports to the start of the modules as cleanup
and avoid an import issue with bb.process on python 2.6.
(Bitbake rev: aed4adfbe3a591ca4f8e41fb763c9f961bf2e6d5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* with read-only PREMIRROR (e.g. mounted over NFS or CIFS
and referenced as file:///mnt/premirror) we cannot use
BB_GENERATE_MIRROR_TARBALLS because all git2_abc.git.tar.gz
files later became just symlinks to read-only location in PREMIRROR
(it works fine on first build and for new components, because
at that time there isn't tarball on PREMIRROR yet).
ERROR: Fetcher failure: Fetch command failed with exit code 141, output:
tar (child): /build/downloads/git2_abc.git.tar.gz: Cannot open: Read-only file system
tar (child): Error is not recoverable: exiting now
(Bitbake rev: 3627b02f77c78beedadadd77c619b9e5edaae076)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* this can be useful when someone wan't to compare old file with
bad checksum and new one
(Bitbake rev: 33c6b93597dd43ab03ce7b62ba3eeb1893a68c38)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds very basic git submodule support to the fetcher. It can be
used by replacing a git:// url prefix with a gitsm:// prefix, otherwise
behaviour is the same as the git fetcher. Whilst this code should be
functional, its not as efficient as the usual git fetcher due to the
need to checkout the tree to fetch/update the submodule information. git
doesn't support submodule operations on the bare clones the standard git
fetcher uses which is also problematic.
This code does however give a starting point to people wanting to use
submodules.
(Bitbake rev: 25e0b0bc50114f1fbf955de23cc0c96f5f7a41e3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bb.process.run() will return one tuple, e.g:
p4file = ('strA\nStrB\nstrC\n'), then there will be an iteration on p4file:
for i in p4file:
[snip]
The i will be 's t r A ...', this is incorrect. use splitlines() to fix
the problem.
[YOCTO #3619]
(Bitbake rev: b7440fb36b419996046f607e66434ce34722272b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 21fe2683aefde10e847e66c11c26d4f4c1e07cfd
since bitbake-selftest doesn't pass when this is applied and
we're seeing multiple build failures from this change.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If there there isn't a subdirectory to the downloadfilename, this was
failing. This patch avoids that issue.
(Bitbake rev: 58bfd8d88495d4cae808e23b7af40e65ad05450f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fetcher differs from the SSH fetcher in that it adheres more
strictly to the SECSH URI internet draft --- it uses the sftp://
instead of the ssh:// scheme, and it uses sftp instead of scp.
(Bitbake rev: d240baeb7a4107d2eba3f08c411c0f086674d8e2)
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A class representing a generic URI, with methods for accessing the URI
components, and stringifies to the URI. This class should be a bit more
flexible than the existing {encode,decode}_url functions in that it
supports more components (e.g. port) and that it does not rely on a
specific order on the return values. This makes it easy to add new
properties without affecting the API.
(Bitbake rev: bd824da8a7eafe27310e410807319628378caeca)
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently stamps end up at the top level of DL_DIR even if the files
themselves are in a directory structure. This patch preserves path
components allowing the top level directory to be less populated
which is an advantage for large sstate caches.
(Bitbake rev: 59921ce3ed7a4c0b7f8ef1a101ad9127469bf1fd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For example, this allows us to specify downloadfilename=PATH in sstate
mirror urls to improve directory structures in DL_DIR when using sstate.
(Bitbake rev: 7850a1364b6b37c58664d84f9c14806b4479b45c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we pass the -O option whilst spidering, empty files are created which is not
desired. We also need to ensure any subdirectories are created when using the
downloadfilename parameter.
(Bitbake rev: d5f78e98d5aba36c95288fbaac267c2d54537b02)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following variables perform no function outside of bitbake:
GIT_CONFIG
GIT_PROXY_HOST
GIT_PROXY_PORT
GIT_PROXY_IGNORE
GIT_CONFIG only affects the git-config command which is not relevant to
the fetcher. This was previously used with the OE GIT_CORE_CONFIG
variable which would provide a basic git config to use instead of the
user's config. This usage was deprecated by git for over a year now:
http://git.661346.n2.nabble.com/Overriding-gitconfig-using-GIT-CONFIG-td6680977.html
GIT_PROXY_HOST and GIT_PROXY_PORT are not used by git.
GIT_PROXY_IGNORE was an OE construct used to create the custom git
config and had no meaning outside of the OE environment. It is not used
by git.
Remove these variables from the fetcher environment.
Users wishing to configure git to work with a proxy should define the
GIT_PROXY_COMMAND environment variable to use an external script.
NO_PROXY can be used within this script to skip the proxy for certain
hosts.
(Bitbake rev: e60270bdce6b8c2f8da1a4838aa374da9db3c86a)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applications are inconsistent in their use of upper and lower case proxy
variables. Curl, for example, specifies NO_PROXY (not no_proxy) in the
man page (changed in 2009 [1]). Avoid proxy issues by ensuring both the
upper and lower case versions of each proxy variable is available in the
environment for the fetcher commands.
Add FTPS_PROXY and ftps_proxy to the list as well.
1. http://curl.haxx.se/mail/tracker-2009-04/0012.html
(Bitbake rev: c3e6b2c5ec81d5ad7dcf606fff16fd5552bd267c)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a particular SRCREV (say for a particular branch) is missing, the
fetcher will currently just report an obtuse error about the "SRCREV"
being invalid. If there is more information is to be had (say from name,
i.e. branch, and pn) then display that as well.
The new error looks something like this:
ERROR: ExpansionError during parsing /home/dvhart/source/poky/meta/recipes-kernel/linux/linux-yocto_3.4.bb: Failure expanding variable do_patch: ExpansionError: Failure expanding variable SRCPV, expression was ${@bb.fetch2.get_srcrev(d)} which triggered exception FetchError: Fetcher failure for URL: 'git://otcgit.jf.intel.com/dvhart/linux-yocto-minnow-3.4.git;protocol=git;nocheckout=1;branch=standard/minnow,meta,emgd-1.14;name=machine,meta,emgd'. Please set SRCREV_emgd_pn-linux-yocto to a valid value
Note the variable listed as invalid is
"SRCREV_emgd_pn-linux-yocto", making it explicit what is wrong.
(Bitbake rev: 63774f5b4edb999300bddd891233f6050f4af877)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: bitbake-devel@lists.openembedded.org
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* taken from SFTP fetcher:
http://patchwork.openembedded.org/patch/43027/
(Bitbake rev: 88e565855b52e905156d85c3f45b341cddfe2f55)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* set localpath in urldata_init
otherwise localpath and basename were None, when fetcher was trying to
define .lock and .done paths
basepath = d.expand("${DL_DIR}/%s" % os.path.basename(self.localpath or self.basename))
* remove "host" from localpath
.done and .lock files are always using just basename, so if someone
has 2 recipes with:
SRC_URI = "ssh://foo/file.txt"
SRC_URI = "ssh://bar/file.txt"
then there will be only one file.txt.done in downloads anyway (and
only first file.txt from first server will be returned on do_fetch
(Bitbake rev: 41208760d70a657297f9ecfb48b74e2c3b594e70)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed "-r REV" from hg clone invocation to fetch the entire repo,
rather than just the subset at the specified revision. This will ensure
that the specified tag exists for successive commands (e.g., the update
built on line 149.)
(Bitbake rev: f0a6261d3a8ede9ebdb6383e02cb2c2de1690640)
Signed-off-by: Jon Szymaniak <jon.szymaniak@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changing the path to a file could change the task hash even if the file
still has the same checksum. This occurs when the task depends on
multiple files and the sort order of their paths changes. Usually the
sorting is consistent because layers tend to have the same relative
paths, but this should take care of other configuations.
The problem arose when using a .bbappend to add files to a recipe in
another layer. If the layer is located alongside the other layers and
their parent directory is moved, the hash does not change. However,
moving the .bbappend layer outside of the common directory can change
the path sort order and the task hash.
(Bitbake rev: 22bd19d208f0251f5a1f9b98f3cac66181f3fc07)
Signed-off-by: Tyler Hall <tylerwhall@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- do not use the BB_URI_LOCALCOUNT database for computing revision
incremental numbers anymore
- sortable_revision now generates "AUTOINC+${latest_rev}"
- use one incrementing value rather than several
- PV becomes 0.1+gitAUTOINC+deadbeefdecafbad_decafbaddeadbeef
- remove all localcount code and simplify the fetcher
- this patch addresses the following proposal:
http://lists.linuxtogo.org/pipermail/bitbake-devel/2012-November/003878.html
(Bitbake rev: 61cf01c5c236b4218f40cfae7c059c2b86765dbd)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Doc cleanup, no functional change.
(Bitbake rev: 5161a84f5dcfe748382a5073349bf10ed21641f9)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wget commands for check and resume were
mixed-up, leading to the following issues:
1. long running "NOTE: Preparing runqueue"
reason: objects were downloaded, not spidered on the mirror
2. Failing network test in Build Appliance, because wget 1.14
(in use in BA) will fail if a file already exists.
During the network connectivity test, index.php file was
actually downloaded, not spidered (checked for existence on
yoctoproject.org website), leading to wget failure.
(Bitbake rev: d7a5185cae975eaca50a9785c6605e895dc7bb51)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The last changes introduced an error in some of the logic. Add brackets
to clarify the meaning of the expression and fix certain build failures.
(Bitbake rev: 87aea65bd5d553bd0495b0f1efe6d41d0bb2810f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently there is code which uses FILESDIR in unpack to ensure
parent directories are created, leading to differing behaviour depending on
which search path is used to locate the directory.
This change standardises the code and takes the data from the fetcher in
question meaning we can standardise the code and deprecate FILESDIR.
(Bitbake rev: 1cccb3bd01ed82e4978acfef0fda1bd797eef72a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently wildcard matches end up working by FILESDIR being defined
in the metadata to a default of "." in FILESPATH which is hacky at best.
This patch adds the behaviour into the fetcher so its at least slightly
more explicit.
(Bitbake rev: 07b5f84133ac79aac4e939ea5f24390ad7f940a5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is a common mistake to use http:// and protocol=git when attempting
to fetch from a git repository using the http protocol; if this is
detected then throw an error explaining that you need to use git:// with
protocol=http instead.
(Bitbake rev: 5bc4930c1638db16bcd5f9c8cfc4081f9ffc192b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add "-d" option to cpio since it is useful:
-d
--make-directories
Create leading directories where needed.
[YOCTO #3137]
(Bitbake rev: a78f9ded7896432b107f34c0bb608b389fdb676a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake-selftest is failing due to directories not being created. This adds in an
appropriate mkdir so the tests can complete. Presumably in general OE use, something
else is ensuring the parent directory is created.
(Bitbake rev: 1270a07713e2a6c6e6fadcc61b785aebc99ae17b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Don't print the full exception in the initial warning - if we later
succeed in fetching the file from a mirror, we won't usually need the
details (which are in the fetch log if they are needed); otherwise the
full error will be printed when the fetch operation fails. Also adjust
the conditional block so that we don't print another warning just
mentioning we're going to try mirrors.
* Call logger.error() so that with knotty the full log is not printed
* Provide an explanation around the lines we print for easily updating
the checksums in the recipe. We don't want users to be just blindly
updating the recipe in case of a transient failure or deliberately
altered remote file.
(Bitbake rev: 2793413106c925b06783beb7413aa87cbcf246c3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Most of the time we don't need to see the fetch command; the fetch log
includes the command as a debug message in any case, so omit it. Also
adjust the way command output is printed (we don't need stderr/stdout
labelled, and print "no output" instead of "output:\nNone" when there is
no output.
(Bitbake rev: a75505a52e4da918222100221f79e8a658f90446)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add in misssing space between the parameters. Reported by
Jate Sujjavanich <Jate.Sujjavanich@myfuelmaster.com>.
(Bitbake rev: 55382f0aac84b8f81cad0b82053c0b8295c33e54)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code in the CVS fetcher is elderly and there are simpler ways of
using the data store. This updates to use the modern APIs.
(Bitbake rev: 78eee8c70a80997293df99475153aed0b2ad0a17)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The localdata variable was removed, fix up a lost reference to this.
(Bitbake rev: 02ccc1396005ce0b7a2150a5ce12b723df21d464)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The implementation of NoMethodError and MalformedUrl was broken - if you
just set self.args in an exception class to a string it treats it as a
list and then fails later on with a TypeError due to the number of
arguments not matching up.
This nasty exception during exception handling was breaking the normal
exception flow (fixed separately), which meant that if you had a
malformed URL or invalid protocol in SRC_URI you would get the
following:
ERROR: Command execution failed: Traceback (most recent call last):
File "/home/user/poky/poky/bitbake/lib/bb/command.py", line 84, in runAsyncCommand
self.cooker.updateCache()
File "/home/user/poky/poky/bitbake/lib/bb/cooker.py", line 1207, in updateCache
if not self.parser.parse_next():
File "/home/user/poky/poky/bitbake/lib/bb/cooker.py", line 1694, in parse_next
logger.error('Unable to parse %s', value.recipe,
AttributeError: 'exceptions.TypeError' object has no attribute 'recipe'
A specific fix for [YOCTO #2977].
(Bitbake rev: 9d4150d99051d24ff218e8a43664ceaf524b19c7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This ensures that if all a MIRRORS entry does is add a slash, this does
not result in a circular loop.
Fixes [YOCTO #3073].
(Bitbake rev: 57055d337a2c9997a6e5d5bdabaec396e3e128e9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Unpack the ".rpm" binary package (only .src.rpm in the past)
* Unpack the .deb and .ipk binary package, their unpack commands are the same.
* This is useful for binary package recipe.
[YOCTO #1592]
(Bitbake rev: de7ceb9459574f33920ccc06255b533434f0ec25)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you have foo and foo.git in GITDIR, the two can end up being confused
by git with some horrible union of the two being cloned. This adds
a workaround to avoid this happening until git 1.7.9.2 onwards is
common enough for this to be removed. We use a symlink to hide
the directories we don't want git to know about.
(Bitbake rev: bbf1f6fe594c721a296ca09ee7c583d4a205c591)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a fetch failure occurs for a local file, this patch ensures we print the
locations searched making it easier for the user to debug the problem.
(Bitbake rev: a461adbc5f09b41c771a7603370f6f2d1299ae8e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* in form which can be copied into a recipe without modification
* like oe-classic did since:
http://git.openembedded.org/openembedded/commit/?id=68abc465559a68e9201c9525be3c4acc6297eaed
* it shows them in right form when they are missing completely, but in
more verbose form when different
* it needs to print that only when checksums were requested, e.g.
fetching from sstate mirror sets both md5mismatch and sha256mismatch,
but your checksums shouldn't be shown
(Bitbake rev: 9eb34fc866775fd8310759a0111f232a9dc98981)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a file:// mirror is being used, the fetcher will create a symlink to the
local file. However, if the local file gets removed, that link will be dead,
and os.path.exists() returns False in that case, so it tries and fails to
recreate the link. Now we unlink such a dead link if it exists.
(Bitbake rev: 229ed3857e826e3e215e843cb51f729c1e13ed37)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without the new exception, when the system is configured to use premirrors,
but not allow network access (via BB_NO_NETWORK), when a recipe was lacking a
checksum the wrong error message(s) were being generated.
Instead of complaining about trying to perform network access, if the system
was able to find the item in the premirror, it should inform the user of the
lack of checksums, and the two SRC_URI fields they should use to update their
recipe.
(Bitbake rev: cb10e9c03a3f96d94e27e18330009616dde5e2b3)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This enhances the fetcher to allow preservation of the path component in urls
like: file://xxx/yyy/somefile.patch.
(Bitbake rev: e49a656a499355a5c6e7eb00bf5b8f1795e8dddb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this allows wget fetcher to store the downloaded file in a specified custom filename in ${DL_DIR}
Exmaple:
SRC_URI = "https://edc.intel.com/Download.aspx?id=6190;downloadfilename=LIN_IEMGD_1_14_GOLD_2443.tgz"
This fixes bug:
[YOCTO #2570]
(Bitbake rev: ceb5871007f221c4d86a7bee421d4dd8d9100aaf)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This problem occurs when fetching a different revision of the same source. Which mean every time you update a bzr package.
Using branch sets the pull location, and are the preferred way of cloning/branching a repository in bzr.
(Bitbake rev: 877a04d0b3cea9d5dbdf3c54fe0feb54cb997dda)
Signed-off-by: Martin Ertsaas <mertsas@cisco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it was send in v1 of proto -> protocol changes but then wasn't in V2
http://patchwork.openembedded.org/patch/31617/
where warning about proto= was moved to shared __init__
(Bitbake rev: b2017f493ab730d804ae44ec5a168d464626d046)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As well, if "proto" is used, get the associated value as "protocol"
(Bitbake rev: 53e6b630f0463d2d07cdaa9c9eb36794dc9b6b69)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This also changes to use -t 2 -T 30 as the defaults which are more sane for
a modern fetcher and already specified in OpenEmbedded metadata.
(Bitbake rev: bf0e5dddf0f63cdb0648fb6d872af5ceef6fbfb0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This brings the cvs fetcher more into line with the others and allows consistent usage
of the FETCHCMD variable and option handling.
(Bitbake rev: 390ad59739356422852e976fa246375abc6aba08)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
svn changed working checkout formats between 1.6 and 1.7. Its convoluted to
detect what format a given working copy is in so the simplest solution is simply
to run "svn upgrade" within the working copy.
The base svn command variable is relocated slightly to enable this new code to
work effectively.
(Bitbake rev: ebd3ecdb5f3c6d3fe1fad27cbed4d80f4277e92e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
'git remote prune' at this location does not make much sense because
the following 'git remote rm' will prune stale and non-stale branches.
The 'prune' can cause trouble because it will access the network
bypassing the no-network code in bitbake. When this operation fails and
throws an exception, the next command (--> 'git remote rm') will be
skipped. This in turn, will make all the following operations fail,
because they assume that the remote does not exist yet.
(Bitbake rev: 2ba23df5fad4b94d38a6aed97f7822226d72eb89)
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
People are using regexps in the url type field so we need to preserve
this bitbake behaviour. To address the issues with https:// urls mapping
badly to file:// urls we anchor the regexp if its not already anchored.
There should be no expressions in the wild which would break with this
change.
(Bitbake rev: ce0579dc256251e523c6330641f98b9f5a0e5761)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If '*' does end up in mirror urls accidently, some strange things
can break since supports_checksum() looks for this, ud.localpath can
then get ignored and this can lead to empty directories being downloaded
"successfully". '*' is a special case for file urls only at this point
so remove any entries that accidentlly make it in through url mapping.
(Bitbake rev: 1369bec2404d942acc3618a8d005ec6868dcfd41)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When writing mirror specifications, the current regexp syntax can be awkward
and hard to get it to do what you want. For example, extracting the 'basename'
of a repository:
PREMIRRORS = "git://.*/([^/]+/)*([^/]*) git://somewhere.org/somedir/\\2;protocol=file"
can now become:
PREMIRRORS = "git://.*/.* git://somewhere.org/somedir/BASENAME;protocol=file"
which is much clearer. A MIRRORNAME substitution is also added which contains
an encoded form of both host and path. One of the problems with the existing
regexp syntax is you couldn't access HOST information from PATH and vice-versa
which is an issue this patch also addresses.
Tests for the new syntax are also added.
(Bitbake rev: c6b1acbad7b3d2698530eb8b5249adb4ab95da21)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we build the mirror urls, its possible an error will occur. If it
does, it should just mean we don't attempt this mirror url. The current
code actually aborts *all* the mirrors, not just the failed url.
This patch catches and logs the exception allowing things to continue.
(Bitbake rev: c35cbd1a1403865cf4f59ec88e1881669868103c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If -l is specified and the source and destination are not on a common
filesystem an error occurs. The -l option is however the default for
git for local paths which the fetcher already now ensures in the
file:// case.
We can therefore safely drop the -l option.
(Bitbake rev: 3aeb268b2aaab4bb8b1cfff1450e0b76aa8ce855)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A file:// url should use "clone -l" to greatly speed
up the clone in the case of a kernel when it is local.
(Bitbake rev: 2bab2cc3ffe67ee2a308074a6e4c2c7be5636d2f)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For mirror mapping, we never use regexps for the type component of
the url. Doing so causes various slightly bizarre behaviour such as
https:// urls being translated to files:// urls which we have no handler
for. This patch forces the type matches to be direct, not regexp based
and gives the expected bahvriour.
(From Poky rev: 695d8aca0999d2d61970b990e83c3132ba6f12cb)
(Bitbake rev: 604df1b25cf114e083f52917df2df64e01279c25)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using ud.localpath as a basename when it points at a directory causes
problems. The supports_checksum() method gives a good indication of whether
ud.localpath can be used in the way we need.
(From Poky rev: 933ec8a44634e33f92f6f76de3a34094c3d63aa6)
(Bitbake rev: dcd79ae20ab2c72c3312b2251c2b6dc4cabe988e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We only consider mirror tarballs when the source and target urls are of
differing types. We also should clear all url paramters when handling
mirror tarballs.
(From Poky rev: da140b8b0b3dda5429f9eee68829ef5247cdfe12)
(Bitbake rev: 7619dcad29a6c2405b15a8fbadfa11e81b399ae1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This means that parameters in the source expression are used as part of the
match. Parameters in the destination are used explicitly in the final
url.
(From Poky rev: c465cb0c5c927dd41d96ad6d6fa1566349574bb7)
(Bitbake rev: 3c468ac3ed6d045561afce19b85ae9dd18d87cea)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we only consider one pass through the mirror list. This doesn't
catch cases where for example you might want to setup a mirror of a mirror
and allow multiple redirection. There is no reason we can't support this
and the patch loops through the list recursively now.
As a safeguard, it will stop if any duplicate urls are found, hence
avoiding circular dependency looping.
(From Poky rev: 0ec0a4412865e54495c07beea1ced8355da58073)
(Bitbake rev: e585730e931e6abdb15ba8a3849c5fd22845b891)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With support for things like git:// -> git:// urls, we need to be
more explicity about the mirrortarball check since we need to fall
through to the following code in other cases.
(From Poky rev: 28e858cd6f7509468ef3e527a86820b9e06044db)
(Bitbake rev: a2459f5ca2f517964287f9a7c666a6856434e631)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are no functionality changes in this change
(From Poky rev: d222ebb7c75d74fde4fd04ea6feb27e10a862bae)
(Bitbake rev: db62e109cc36380ff8b8918628c9dea14ac9afbc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This assists with build reproducuility. It also avoids errors if cwd
happens not to exist when we call into the fetcher. That situation
would be unusual but I hit it with the unit tests.
(From Poky rev: 86517af9e066c2da1d580fa66b7c7f0340f3403e)
(Bitbake rev: b886c6c15a58643e06ca5ad7a3ff1f7766e4f48c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The commit 420eb112a4f (fetch2: quote/unquote url paths) caused a regression
since local file urls containing quoted characters are no longer being handled
correctly. This fixes things so the url is dequoted correctly, fixing various
fetcher failures with recipes like "gtk+".
[YOCTO #2558]
(Bitbake rev: 95c0595d66b3f8a5f0716662ba2a878600f312ea)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are actually two problems to fix
1) The exception for bb.process.ExecutionError must be processed first
because it is a derived from the bb.process.CmdError class and
we never reach the ExecutionError otherwise.
2) The stderr needs to be printed as well as stdout to determine
the root cause of a fetch failure.
The example I have is that I got a log that looked like:
--
ERROR: Function failed: Network access disabled through
BB_NO_NETWORK but access requested with command
/usr/bin/env wget -t 5 -nv --passive-ftp --no-check-certificate -P
/localds 'http://downloads.yoctoproject.org/[...CLIPPED...] url None)
--
That really didn't tell me much, but with this patch I get error above
plus the following:
--
STDERR: /net/[...CLIPPED...]kernel-tools.git: Read-only file system
--
(Bitbake rev: af2133a04e1f4b22b181adf9c71f89c439bb88cf)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Skip evaluating remote URIs when doing local file checksums, because we
don't need to process them and doing so will trigger a parse failure if
SRCREV is not fully specified. Whilst this is just delaying a check
until runtime (when do_fetch runs for the recipe) we're only validating
this here accidentally and if we did wish to check it during parsing it
ought to be done explicitly.
Fixes [YOCTO #2512]
(Bitbake rev: 99feb77c2de707f2d825566cf48371c48f450e3e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This function no longer returns a value, it raises errors instead, so
update the comments to reflect this.
(Bitbake rev: 8b61b9584a8b00378f9fd8f165dbd65dcfd3c14e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace os.popen with subprocess.Popen since the older function would
fail (more or less) silently if the executed program cannot be found
There is a bb.process.run() which will invoke the Popen to run command,
use it for simplify the code.
For the:
p4file = os.popen("%s%s files %s" % (p4cmd, p4opt, depot))
...
for file in p4file:
list = file.split()
in bitbake/lib/bb/fetch2/perforce.py, it should be an error in the past,
since it didn't use readline() to read the pipe, but directly used the
split() for the pipe. Use the bb.process.run would fix the problem since
bb.process.run will return strings.
More info:
http://docs.python.org/library/subprocess.html#subprocess-replacements
[YOCTO #2075]
(Bitbake rev: 8d6700255a6d4dda403c89b171a6d4a1883e5aae)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace os.system with subprocess.call since the older function would
fail (more or less) silently if the executed program cannot be found
More info:
http://docs.python.org/library/subprocess.html#subprocess-replacements
[YOCTO #2075]
(Bitbake rev: f5b3bf115dc1ffbfb241a49cec0fc3654cb71021)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Gathers a list of paths to have checksums calculated at parse time, and
processes these when calculating task hashes. Checksums are cached with
the file's current mtime. Thus, changing any local file in SRC_URI will
now cause the do_fetch taskhash to change, thus forcing a rebuild.
This change adds very roughly about an 8% increase in parse time (a few
seconds) and maybe a few seconds during runqueue generation, so a fairly
moderate performance hit.
Note that since paths are resolved at parse time, this will not force
a rebuild when files are introduced which would cause that resolved path
to be different - for example, where a machine-specific version of a file
was added without otherwise changing the recipe. This will need to be
handled in a future update.
Code to hook this into the signature generator was courtesy of
Richard Purdie <richard.purdie@linuxfoundation.org>.
Implements [YOCTO #2044].
(Bitbake rev: c993b7c457f8b7776e8a5dff253bfa0724bc2cae)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This ensures we can handle things like %-encoded characters in the path
portion of urls.
(Bitbake rev: b1dbc24ebcc4e5100c32568c2c41fd982fb4bcce)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this change, bitbake will try and checksum a wildcard which
will lead to fetch failures.
(Bitbake rev: ac53b88be58b0bed21730c0b61a8fc8e801a2f1b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In this way we avoid failing the build while trying to fetch local
directories.
[YOCTO #2475]
(Bitbake rev: 39adb5741d9eee0879d3181be505400dffc60804)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were some hardcoded behaviours in the system for which backends
support checksums verses which backends recommend them verses which
don't recommend them.
This moves the functionality into specific fetchers and then makes the
general code generic. This cleans up the codebase and fixes some corner
cases such as trying to checksum directories returned by the git fetcher.
(Bitbake rev: ef6d268f7b8527541a7fb044cf95a973be4097f4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, checksums are only checked for remote files. This changes
the check to apply to any file we have checksum data for. A mismatch
against a file is fatal but in the local case, no warnings are shown
about missing checksums.
(Bitbake rev: 80411b3acf2173a4a7d415102d16676eb98363e3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When fetching from mirrors, checksum errors would get buried in the
logs. This raises their profile so a warning is logged on the console
when fetcher checksum issues are encountered, even if other attempts
are made to get the file (which may or may not have the same issue).
(Bitbake rev: d43fafd7f01b5534499b45213197d8ccececdbc4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Under certain contitions such as local file:// mirrors of all files,
bitbake might not check checksums. This is not desirable and we should
always check the checksum where possible.
This only exception to this is the git mirror tarball case where the
checksum is unknown but we need to create the .done stamp for other
reasons. This patch preserves thta functionality but in a more specific
section of code where this doesn't interfere in normal checksums.
(Bitbake rev: 2592a43e422c06a6f6174ada562e9c8ba25e1ec1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Under certain circumstances, bitbake could remove files which were
outside its control since it unconditionally removes ud.localpath.
In the file:// case this can point at external paths.
This patch converts it to use the clean() method which will remove
files when its safe to do so but not in the file:// case since the
file:// handler has an empty clean method. This means bitbake no
longer removes files outside its control and is generally much safer.
(Bitbake rev: 9ad1cebe2220b41da2141cdb3f0a403abb46d77c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With floating revisions and no specified branch, the fetcher could fail
with some obtuse errors. This was due to the branch name being set to None
which makes no sense. This patch reworks some conditions to avoid this.
(Bitbake rev: 740c58d43cfb1445dd126e4827bb70ce988ca107)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows some simplifications of the function and is slightly faster.
(Bitbake rev: 5999dc9985ad087c036611bfaa59b090a08781a6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: b766630ed7e099fffe817928a2811272677a1b26)
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't check for network access before grabbing the the current head,
cloning, or updating a clone when the protocol is 'file'.
(Bitbake rev: d5847bc5254b9d2f28a6b574f6157d1286add27c)
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As UI request, in recipes selection page, if user exclude a item,
the related depends recipes will be excluded together,so the view
clearly to add it.
[YOCTO #2100]
(Bitbake rev: c9eed04c6275ef2c694f89e047f85c7de76f89b6)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: 5a1e62a8cdd4f0253b0dc59046b3b4c3186af461)
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were seeing duplicate endings to urls:
DEBUG: For url ['http', 'www.apache.org', '/dist/subversion/subversion-1.7.1.tar.bz2', '', '', {}] comparing ['http', 'www.apache.org', '/dist', '', '', {}] to ['http', 'archive.apache.org', '/dist', '', '', {}]
DEBUG: For url http://www.apache.org/dist/subversion/subversion-1.7.1.tar.bz2 returning http://archive.apache.org/dist/subversion/subversion-1.7.1.tar.bz2/subversion-1.7.1.tar.bz2
This patch addresses this by only performing substitutions when really needed.
(Bitbake rev: a17473d51f54a9dfb4eeaa5ad516c4851d5ac142)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For similar reasons as the nocheckout option, packages that need
enhanced control over the checkout and branch creation on a repository
may want a complete mirror/bareclone created of the repository when
performing the unpack.
This is useful/required when a local respository is being used, but
local tracking branches have not been created for all branches that
a given recipe needs to manipulate. The standard git clone operations
will create remote branches for the branches that are local to the
source repository, but branches that are remote do not translate to
the destination repository. Doing a mirror/bare clone of the source,
makes all branches available to the repository.
This is a particular use case, but the ability to do a bare clone
creates great flexibility in recipe space, with no impact to recipes
that don't need this functionality.
To implement this, a new option 'bareclone' is craeted which creates
a mirror copy of the repository and leaves it bare in the unpacking
phase. A recipe that uses this option must both checkout and debare
the repository itself.
(Bitbake rev: 82482aae6f311c994275fb0b6b32d954bbfc78c3)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To quote my report of this to the git mailing list:
"""
I have a problem with git clone commands using alternates failing by
mixing up different repositories. I have a situation where I could end
up with both:
/srv/mirrors/repo
/srv/mirrors/repo.git
as bare clones.
I then try cloning "repo" with alternates with the command:
$ git clone -s -n /srv/mirrors/repo /tmp/foo
Cloning into /tmp/foo...
done.
$ cat /tmp/foo/.git/objects/info/alternates
/srv/mirrors/repo.git/objects
Note how I'm now referencing repo.git, not repo. This doesn't work as
expected giving some very bizarre results when actually using the
repository.
I appreciate this is a rather bizarre corner case but its one that is
breaking the build system I work with. Ideally people would use a
consistent URL for the same repository but we have an example where they
haven't and this really shouldn't break like this.
Looking at the code, the cause seems to be
clone.c:get_repo_path():
static char *suffix[] = { "/.git", ".git", "" };
since its looking in order for:
repo/.git (fails)
repo.git (suceeds, incorrect)
repo (never looked at)
I'm not sure what would break if that order were to change, swapping the
last two options.
I can "force" the issue by running:
git clone -s -n /srv/mirrors/repo/ /tmp/foo
but this results in the slightly odd looking:
$ cat /tmp/foo/.git/objects/info/alternates
/srv/mirrors/repo//objects
which does at least work.
"""
This patch adds the trailing slash to ensure the correct repository is
referenced at the expense of some ugliness in the alternates file.
(Bitbake rev: d978e7b35550e3785c7c567ffe4c40a3c3947450)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A lot of our checks in the fetcher code assume that if the downloaded
file exists, the download finished successfully; this meant that if
BitBake was interrupted in the middle of a fetch then it would not
resume the fetch the next time, but instead attempt to use the
half-fetched file and usually fail as a result.
Since we're already writing a ".done" stamp file when a fetch completes,
just check for its existence and assume the download didn't complete
successfully if it isn't present.
(Bitbake rev: 721e986624529aedef96dd06c9fe6243f2897b10)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make the warning for the initial fetch failure a single line - we don't
need the full command and output here yet, but write it into the log in
full as a debug message. However, if fetching from mirrors fails as well
then print out the full details for the first error that occurred as an
ERROR rather than a WARNING.
Since this is logged as an ERROR, combined with an earlier patch it
suppresses the full log which does make the output much more readable
for any fetch error.
Fixes [YOCTO #1832].
(Bitbake rev: 6bbdc7d259c0cc041b62dbdb26cfc3ec6edcb6f3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The termination signal and exit code of the fetch process were not being
decoded correctly, resulting in bitbake reporting that the process
terminated with a signal of the exit code (if it was under 255). There
are functions in the Python os module to do this decoding correctly (for
Unix at least), so let's use them.
(Bitbake rev: 50aea9a76e40cf71cc3f1462c88298e4846a031c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* The "name" argument to FuncFailed is rarely used as a name in actual
usage within bitbake, so don't treat it as one in the output.
* Don't print URL for FetchError if it was not specified (i.e. don't
output "Fetcher failure for URL 'None'")
* Don't include URL in "unable to fetch from any source" message since
we supply it to FetchError and it will be printed anyway.
* Don't include URL in "checksum failed" message for the same reason
(Bitbake rev: 86811bd85e2e453ee92a05fe60160d9b49ac69e8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Local cloning of git repositories from DL_DIR into WORKDIR fails when
using ssh URL with port specification e.g.
"ssh://user@host:port/path/to/repo.git". Git fetcher clones such remote
repository into "${DL_DIR}/git2/host:port.path.to.repo.git". However,
when clonging from ${DL_DIR}/git2/host:port.path.to.repo.git into
${WORKDIR}, git fetcher fails with "ssh: Could not resolve hostname
${DLDIR}/git2/host: Name or service not known".
A solution is to replace ":" by "." in host component, similarly as it
is done when replacing "/" with "." in path component, so that local
clone directory in DL_DIR looks like this: "host.port.path.to.repo.git".
(Bitbake rev: 1f2867b79f1cd2bfbdc849ba5677a39db6fa3396)
Signed-off-by: Juraj Hercek <juraj.hercek@jhksoftware.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BB_STRICT_CHECKSUM caused a backtrace as the FetchError parameters are
incorrectly specified such that FetchError is being passed 8 params
when it's expecting 3. This fixes the parameters so we're passing a
formatted string and the url.
(Bitbake rev: b8b2f4287c9125542b18a294c0a94ed89a7e73a8)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently if you specify a mirror like:
file://.* http://linux.freescale.net/yocto/sstate-cache
it won't work as you expect whilst:
file://.* http://linux.freescale.net/yocto/sstate-cache/
will since it has the trailing slash.
This patch handles both cases correctly. It also adds some debug to
the uri_replace function since its near impossible to debug it without
some kind of output.
[YOCTO #1578]
(Bitbake rev: a0246bf09c93bb657eaf6ba61d090b247ed33640)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Defaulting to any file in DL_DIR as the first match for a file:// url
doesn't make much sense and can lead to unexpected results.
This patch changes the logic so this is the last fallback location
instead. Whether it should be using DL_DIR at all for this is a
good question but something for another patch.
[YOCTO #1710]
(Bitbake rev: 5597a68fac0954c682b67471722c2643e2415f99)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch improves the usability of checksums by only requiring one checksum
be defined.
Further, checksum verification will provide as much information as possible
at, rather than a bit at a time. No longer will you need to run fetch, see an
md5sum mismatch, fix it, run fetch, seen an sha256sum mismatch, fix it and
fetch again. If neither checksum is defined we now report both missing sums
at once - rather than one after the other.
Finally, if both sums are incorrect, we'll report both incorrect sums at the
same time.
Fixes part of [YOCTO #1399]
(Bitbake rev: 30ca41e596955fcbbe1ae6f4436ecf14cef96f8d)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
git could need these environment variables when working behind
a proxy
(Bitbake rev: dca46cc2e1c75b6add2c4801e2994a4812745f5b)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
git fetches can fail (or at least return failed) when trying to
fetch and prune rebased branches. This patch simply adds a -f
to the git fetch command so these failure are ignore
Generally, if some SHA was rebased away it's not coming back so
there is no point in not doing this force
(Bitbake rev: a7b75e4db52445b30ec0fc0053dcf454f5f7d2db)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The _build_revision method in Hg class gets called with the wrong number
of arguments. This tiny patch adds a 5th argument to the method
declaration to prevent python from throwing an exception.
(Bitbake rev: 623e9c7f7a9cf12b8c81c26cc608990682a601dd)
Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make the git fetcher's subpath (path within the git repo to fetch)
option set the destsuffix (destination directory) option by default.
This reverts the behaviour of subpath to the same as when it was
introduced.
Based on a patch by Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
(Bitbake rev: 3e7f8afeacf7c8c8de3e87778a3907e33d4a06b3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* in some cases there could be output like this
ERROR: ld.so: object 'libpseudo.so' from LD_PRELOAD cannot be preloaded: ignored.
before wc -l output and returned 'output.split()[0] != 0' is always True
(Bitbake rev: 3a54dcc09a12406ec6cf22b4b1a2cc4fc203822c)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* logging/logger typo was fixed in 38a598731b49c8a0ba0ede570adc33eb1e848235
but debug level is still missing
(Bitbake rev: 9de432fe2348cdbc93037bb49abb508d1fd38336)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change the wget fetcher to not emit the commands output when calling checkstatus, this
matches the behaviour of the git fetchers checkstatus() method.
(Bitbake rev: 5896d8ff7bcf85b3bab20fc27c4c15e87f86b4d9)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: 639db8c766cada7180f9447f51303f9b30d7e817)
Signed-off-by: Holger Hans Peter Freyther <holger@moiji-mobile.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a user has a ~/.gitconfig file, git fetch --all will reference it. To avoid
this we should run git fetch with an explicit url telling it to fetch all
references (which includes tags).
I'm assured this means git won't reference the file, see the discussion on the
git mailing list (subject Overriding ~/.gitconfig using GIT_CONFIG).
[YOCTO #1134]
(Bitbake rev: 8540c09d4e509e3277940464c71174d8a0aca6ab)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use git ls-remote to implement checkstatus command for the git fetcher.
(Bitbake rev: 0ed281feb6d244d3700da484f4e83394ae394f93)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, if checksum mismatch, fetcher will try mirror,
and if mirror fetching fail, it will show error "Unable
to fetch URL xxx from from any source" which actually
hide the real reason and make user confuse.
so showing warning message will make it more clear.
Fix [YOCTO #1256]
(Bitbake rev: b3e924297d670963714343d02f7898798fec84fd)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is for [YOCTO #1085] fix.
If the upstream fails a checksum, retry from the MIRROR before giving up.
This will add more robust fetching if an upstream serves a bad file or webpage.
fetching of distcc prior to the move from samba -> googlecode is a good example
of this.
(Bitbake rev: b631e922257de52bf2247c01152d9856c870e7d0)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the git fetcher can malfunction when branches change in remote
repositories since whilst the update code updates the "origin" remote,
this isn't linked to the local heads.
By passing the --mirror option to 'git clone' and 'git remote add',
linkage between the local heads and remote heads is created with a 1:1
mapping, hence all the appropriate heads are then updated correctly.
This fixes some issues which have been seen with the Yocto autobuilder
mirrors.
(Bitbake rev: 3725602ec53df116dc108b3197a426b86ca43d5f)
Signed-off-by: Richard Purdie <richard.purdie@linux-foundation.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When an invalid 'protocol' parameter is used in a git SRC_URI,
the error reported was not helpful:
ERROR: Function 'Fetcher failure for URL: 'None'.
<environment dump>
fatal: Could not make temporary directory: No such file or directory
So instead check that ud.proto is set to something valid, and if not
raise a meaningful ParameterError which explains that the protocol
type is the source of the problem.
This fixes bug [YOCTO #1142]
(Bitbake rev: a2a29b72275ab03a263f4479a590b92111a0d6a8)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update exception handling syntax to use the modern style:
except ExcType as localvar
(Bitbake rev: dbf5f42b06bef81749b13aa99945cc1292a6676d)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The symptom of this problem is something like a cvs url which specifies
a username where the username is then passed through to something like
an http mirror.
This patch fixes things by ensuring empty entries are preserved in the
new URL.
(Bitbake rev: c1d978d7bd1ac8eb1e2d50029ab2384be9f72fb4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The git command string logged via check_network_access() does not match
the actual command executed in a few places. Ensure that it does.
(Bitbake rev: 10f3ca52dc274cd8b240987cfd7cd003aeda7ab1)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace a call to print() with logging.debug() and flesh out the
message to clarify the state being reported.
(Bitbake rev: 9a28f7744e2f4224e7c097b8c4c1d49731b9a47e)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
current git fetcher unpack method only checkout index and working tree,
but did not did not update the git branch in ref/heads, so user may not
get right info in ${S} by using git.
this patch enhance the unpack by using git checkout to fix this issue.
Fix bug [YOCTO #1089]
(Bitbake rev: c0eb89054aef4957966f98b44e7f3cce14fb337a)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
make the nocheckout option format to be: default is "0",
use nocheckou=1 to set this option
with this patch, the format will be consistant with other bitbake options
like rebaseable
(Bitbake rev: bd51659f5ee521cb8e6631d5f26792ab573e6b30)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some upstream git repo may rebase in the future, which means current
revision may disappear from the upstream repo after the rebase.
current git fetcher can not handle this case, because the git mirror
tar ball is per repo, and may also change in the rebase and lost the
current revision info.
To fix this issue, this patch
- add rebaseable tag in the SRC_URI
- for rebaseable repo, make git mirror tar ball per revision, in this
case, even upstream rebase, the git mirror still has the current
revision info.
- for rebaseable repo, generate mirror tar ball by default, since the
repo may change in the future.
(Bitbake rev: 92701d4c5372db48847c70da4ebd0736d79fd54b)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- use os.chmod, not os.fchmod, as the latter is missing under pypy
- rearrange our imports a bit
- don't die if sqlite3 is missing shared cache support
(Bitbake rev: f229824dc9c453adf6067500e2bf6761536e4f2f)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In current git fetcher, tag does not work due to commit http://git.pokylinux.org/cgit/cgit.cgi/poky/commit/?id=5920e85c561624e657c126df58f5c378a8950bbc. Tag is not in sha256 form, so it will be treated invalid, and silently replaced by latest revision.
To fix it, this patch treat tag name as branches name, thus it will be handled correctly later. Thanks Richard for reviewing and proposing the better approach.
Fix [YOCTO #972]
CC: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Yu Ke <ke.yu@intel.com>
The ordering constrains on the urldata_init functions are not straight
forward. To avoid further problems, create a helper function to setup
the source revisions which the init functions can all at the appropriate
point.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix a bug where ud.branches were being referenced before it was set by
the git fetcher when using AUTOREV. To do this some ordering needed
to be changed. This fixes errors like:
ERROR: Error parsing /recipes-kernel/linux/rt-tests_git.bb: Failure expanding variable
SRCPV, expression was ${@bb.fetch2.get_srcrev(d)} which triggered exception
AttributeError: 'FetchData' object has no attribute 'branches'
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the current implementation, file:// urls as used by sstate don't access the
mirror code, breaking sstate mirror support. This change enables the usual
mirror handling. To do this, we remove the localfile special case, using the basename
paramemter instead. We also ensure the downloads directory is checked for files.
The drawback of this change is that file urls containing "*" globing require special
casing in the core.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* This patch fixes a cosmetic issue currently we get with master
WARNING: /home/kraj/work/bitbake/lib/bb/fetch2/__init__.py:733:
DeprecationWarning: Call to deprecated function bb.mkdirhier: Please use bb.utils.mkdirhier instead. bb.mkdirhier("%s/%s" % (rootdir, destdir))
(Bitbake rev: 36fe59ce314c295d239b76de34c8714def2c32d5)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This create a clean() method in each of the fetcher modules
and correctly cleans the .done stamp file and lock files
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Enable the fetcher to be able to unpack and SRPM. By default the system will
unpack the contents of the SRPM into the WORKDIR.
A new syntax "unpack=file" was developed for the SRC_URI, to allow for a
recipe to extract a specific file within an SRPM. An unpack operation will
then be executed on the extracted file.
In order to apply extracted patches (or unpack files not specified with
unpack), you must specify the path using WORKDIR, i.e.:
file://${WORKDIR}/mypatch.patch
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
See the problems in http://bugs.python.org/issue1692335, need to set self.args
correctly.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton
Richard Purdie
Olof Johansson
Robert Yang
Martin Jansa
Zhenhua Luo
Otavio Salvador
Peter Kjellerstedt
Florin Sarbu
Volker Vogelhuber
Nicolas Dechesne
André Draszik
Vanveerdeghem, Simon
Matthew McClintock
Darren Hart
Jon Szymaniak
Tyler Hall
Constantin Musca
Robert P. J. Day
Cristian Iorga
Christopher Larson
Mark Hatle
Nitin A Kamble
Martin Ertsaas
Andrei Gherzan
Enrico Scholz
Jason Wessel
Christopher Larson
Jeff Polk
Liming An
Gary Thomas
Adrien Bustany
Bruce Ashfield
Juraj Hercek
Joshua Lock
Julian Pidancet
Holger Hans Peter Freyther
Yu Ke
Scott Garman
Khem Raj
Saul Wold