An easy workaround for kbd build failure is to disable
parallel make install for now.
[YOCTO #7436]
(From OE-Core rev: eb8bed1a5eb9690462f8724c5b00a5d7044eba4c)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The busybox defconfig doesn't contain a @DATADIR@ marker, so
the attempt to replace it in do_prepare_config is redundant.
(From OE-Core rev: a3b0c401cac043a132e7e2d491b3871ec94c258e)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_compile() task failed when RPM signing was in use.
(From OE-Core rev: 4038970f8ce27ac0d7a0afe2cdaa9a65108dfff5)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This file wasn't named as a patch, nor told to apply explicity, so it was just
unpacked to the work directory and not applied. Rename the file so the patch is
applied correctly.
(thanks to Petter Mabäcker <petter@technux.se> for spotting this)
(From OE-Core rev: 02be728762c77962f9c3034cd7995ad51afaee95)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the last update of systemd libgudev was splitted out of systemd. To make
packages depending on libgudev happy, a recipe building libgudev was created in
meta-oe and the dependencies were modified from udev to libgudev.
This works fine for distros using systemd as init system, but distros not using
build udev which provides libgudev.
(From OE-Core rev: e11801d031896351364e7723db3392012f58b603)
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This dependency isn't required now that systemd doesn't include gudev, so remove
it.
[ YOCTO #8398 ]
(From OE-Core rev: 5e124c2ad5d961cdab954ab054f9ae7718ab1b55)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the modern checksum infrastructure, this is no longer needed
(much in the same way images no longer need this).
(From OE-Core rev: 30e83bbc3f90b4cd4caf8ad7ca847267ae50cf7e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The runuser command fails with below error message, add proper PAM
config files to fix the problem. The config files are borrowed from
CentOS 7.0 release.
runuser: Failure setting user credentials
(From OE-Core rev: a6616f1a7b8e30428e61b6437f2f48379efc101d)
Signed-off-by: Shan Hai <shan.hai@windriver.com>
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 5c0dc3e8f49621827e20f79fb6bc945c3f17315e)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch was on mailing list, another patch to make sure -r is not
passed directly but via -Wl switch is added.
This was exposed when using clang and gold linker, clang does not have
-r switch to do relocatable objects and problem happens specific to OE
becuase we use LD = CC
now what happens is that busybox assumes that linker will be called
directly, and hence sprinkles linkers options in its kbuild system which
aggregate into LDFLAGS, some of these options are happily ignored by gcc
as well but it passes -r options rightly to linker so it all works,
however when using clang, this falls apart since -r is not known option
for clang so it drops this option and all obects which should be
partially linked becomes ET_EXEC and when they are added to final link
then gold starts to get confused
/mnt/home/kraj/work/angstrom/build/tmp-angstrom-glibc/sysroots/x86_64-linux/usr/bin/arm-angstrom-linux-gnueabi/arm-angstrom-linux-gnueabi-ld:
error: applets/built-in.o: unsupported ELF file type 2
clang-3.7: error: linker command failed with exit code 1 (use -v to see invocation)
(From OE-Core rev: 117282486b68e4da468c21795ea87bfc85625885)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes busybox honor UTMPX feature if available in a libc
[YOCTO #8243]
(From OE-Core rev: c5de9b2ddb38790866bda5a88b9b7119aac0aa3f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some architectures (such as MIPS) need libatomic from gcc-runtime to perform
atomic operations, so this package should be included in all SDKs.
[ YOCTO #8274 ]
(From OE-Core rev: 55e8067d3fb6a1fc97b4486e28e3e3bae2b5cd00)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'BRANCH' variable name has no explicit relation with the
SRC_URI. Using 'SRCBRANCH' makes it more obvious and easier to
identify.
This patch makes the use consistent across the metadata.
(From OE-Core rev: ed86bf9c327ceda3976e799ca453028382f277a7)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes booting with initramfs and root=UUID on machines with IDE
disks, like "runqemu hdddirect", and kernels which still use the
deprecated CONFIG_IDE.
v2: Rebased against current master-next.
(From OE-Core rev: 3d27dfb7e78b8e17b76fcc1d8f8e2b29ca26b0df)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Systemd's configuration files for creation, deletion and cleaning
of volatile and temporary files are installed in /usr/lib even when
multilib is in use (when /usr/lib64 is available). In this check the
systemd.conf file will not be found if libdir is /usr/lib64 so we fix the
path to match this file's installation path to look for it in
${exec_prefix}/lib
(From OE-Core rev: c1ef36c2b3e3876cc166a9a5e153fc6f23b42b92)
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes systemd failing to start on Raspberry Pi 2 if it is compiled
with GCC 5.2.
It would try to start "Journal Service" and "udev Kernel Device Manager"
but fail repeatedly.
[YOCTO #8291]
(From OE-Core rev: 8572b883730d68fa2e9bc46375383f5f1edfae7e)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit d347bd8b672fbd614a6267f640133cf399b9645f.
Accidentally merged v1 of this, revert so we can merge v2.
(From OE-Core rev: 564a114a72d223e9445139394a8d2574c7af98df)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes systemd failing to start on Raspberry Pi 2 if it is compiled
with GCC 5.2.
It would try to start "Journal Service" and "udev Kernel Device Manager"
but fail repeatedly.
[YOCTO #8291]
(From OE-Core rev: 338f18e5808ea0472350d0c26edd0938ffbdcd23)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the "boot" parameter refers to a non-existent device, the only
visible output at normal log levels was a rather confusing:
ERROR: There's no '/dev' on rootfs.
That's because the actual error, not being able to find the root
device, was only a debug message, which gets ignored in the default
mode.
Promoting the "root '$bootparam_root' doesn't exist." message from
"debug" to "msg" gives sufficient context to understand the error. A
more intrusive change would be to change also the control flow.
(From OE-Core rev: 71d7803e5b13e26fd8001e87cfbac68114ddaa30)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to a missing $ before the variable name, all fatal errors ended up
invoking a shell, instead of only doing that when init_fatal_sh is set
as boot parameter.
(From OE-Core rev: 2a4335eae4b31ea9451a665dad2ba33ae4967670)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Switching MACHINE was causing nativesdk-glibc to rebuild. This was
from the use of OVERRIDES in one of the functions. Exclude OVERRIDES
from the checksum to avoid this.
[patch to oe-selftest to ensure this doesn't regress follows]
(From OE-Core rev: 5e8993632e48e83aa4bab90363506b9d5f7a468f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The nscd init script uses #! /bin/bash but only really uses one bashism
(translated strings), so remove them and switch the shell to #! /bin/sh.
(From OE-Core rev: 487d4b4d5521ca490e22668ca66921504a1b898f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The base-files recipe installs /mnt/mtab (it is a softlink of /proc/mounts),
so if an image includes the latter, there is no new to created it again inside
the install-efi.sh script, otherwise an error may occur as indicated on the
bug's site.
[YOCTO #7971]
(From OE-Core rev: 6c6c6528954952e1e323f5a26afd93b99913e6f2)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix a variety of problems such as typos, bad punctuations, or incorrect
Upstream-Status values.
(From OE-Core rev: bd220fe6ce8c3a0805f13a14706d3130ea872604)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the init_fatal_sh boot parameter is present (i.e. used without
value) and a fatal problem occurs inside the initramfs-module, a shell
will be started instead of looping forever.
Useful for debugging.
Interestingly enough, the code was already indented to support such an
if check...
(From OE-Core rev: 1d3dc681e809846dba7cae4f81566045a3f8c205)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It can be useful for debugging to override the default /sbin/init.
This is something typically done via the init boot parameter which
then gets interpreted by the kernel. But when using an initramfs, it
is the initramfs which must react to the option.
(From OE-Core rev: dfd6d4c765924f472ac2df724342547b5c15249a)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Default is to mount the rootfs read/write. "ro" can be used to turn
that into read-only, which is useful on systems where userspace does
an fsck before remounting read-write.
Giving both "ro" and "rw" will still mount read-only regardless of the
order, because the ordering information is not preserved by the
initramfs-framework's boot param support.
(From OE-Core rev: a09f10f9360862c16fb68972ac041d474d6e3a64)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These two parameters are supported by the kernel
(https://www.kernel.org/doc/Documentation/kernel-parameters.txt). When
an initramfs is used, the kernel does not mount the rootfs and the
initramfs needs to react to them.
The boot parameters can be set both by the image creator and
by users.
Supporting these two parameters is useful:
- rootflags is needed to ensure that the rootfs is already mounted as
intended in the time between starting init and init remounting
it (as systemd does); this is critical for IMA where iversion must be
active already when system starts writing files.
- setting it correctly up-front avoids messages from the kernel ("cannot
mount ... as ext2 because ...") when trying to guess the desired type.
For example, assuming that only one of ext4/ext3/ext2 is set,
rootfstype could be set in an image recipe with:
APPEND_append = "${@''.join([' rootfstype=' + i for i in ['ext4', 'ext3', 'ext2'] if i in d.getVar('IMAGE_FSTYPES', True).split()])}"
(From OE-Core rev: b8ea1c61b4b8071edf70f5d42119c54ea84de330)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
provide the nfs-client IMAGE_FEATURES, to ease a user to only
install nfs client related files to image
(From OE-Core rev: bbdc808a8ea76369a36473c906991e25ca49c323)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Support for chkconfig (--enable-chkconfig) was removed in favour of
calling an abstraction /lib/systemd/systemd-sysv-install. This
needs to be implemented for OE.
(From OE-Core rev: 9d298d1563b3fd5ad569f806cc296e13279e7cf6)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop patches that were straight backports from upstream
MIT licence was unused and dropped from systemd sources
for more details see
8f1e0c5f38
Drop gtkdoc dependency since libudev API documentation has been converted from gtkdoc into man pages
Remove packaging gudev as it has moved to separate repository outside
systemd
For more details see
2375607039
package newly added script for xorg to be usable with systemd --user
intance
For more details see
1401ec2d34
machinectl now has shell support
private-zone DHCP options are supported by systemd-networkd
For complete differences between two releases run
git log --oneline v219..v225
in systemd git clone
Change-Id: I998e652382950a3c74c4839f3767ef8bef23d88f
(From OE-Core rev: ec2770b0d1d562ff6d5736e056f937fa24c67b10)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
getopts is a common applet more so now needed by systemd for working
with sysv scripts
(From OE-Core rev: 10c2c484d5916ad476ad7717c3629f6684f01e6d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kernel parameters like "uvesafb.mode_option=640x480-32" were turned
into shell variables named "bootparam_uvesafb.mode_option", which
triggered errors from the shell because the name is not valid. Now
points get replaced with underscores, leading to
bootparam_uvesafb_mode_option in this example.
(From OE-Core rev: de81e804f0654092d20ccb8e6e40f4ff614c4b09)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some kernels, for example linux-yocto 3.19 for qemux86, fail to
execute /init in an initramfs unless there is already a /dev/console
char device in the initramfs. Booting then fails with:
Kernel panic - not syncing: /dev/console is missing or not a character device!
Please ensure your rootfs is properly configured
The panic itself comes from a linux-yocto specific patch to
kernel_init_freeable in init/main.c, but even without it, that
function will print an error when /dev/console is missing. The
kernel's Documentation/initrd.txt also mentions creating that device.
It remained unclear why this is not a problem on other machines. On
intel-corei7-64 from meta-intel, something (the kernel?) creates
/dev/console and /dev/[012] before transfering control to the init
script. In that case, creating /dev/console in advance is not
necessary, but does not cause any problem either.
(From OE-Core rev: 1b64664f0c388f41084f5db6e46e3e68c53fb6d9)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some kernels, for example linux-yocto 3.19 for qemux86, fail to
execute /init in an initramfs unless there is already a /dev/console
char device in the initramfs. Booting then fails with:
Kernel panic - not syncing: /dev/console is missing or not a character device!
Please ensure your rootfs is properly configured
The panic itself comes from a linux-yocto specific patch to
kernel_init_freeable in init/main.c, but even without it, that
function will print an error when /dev/console is missing. The
kernel's Documentation/initrd.txt also mentions creating that device.
It remained unclear why this is not a problem on other machines. On
intel-corei7-64 from meta-intel, something (the kernel?) creates
/dev/console and /dev/[012] before transfering control to the init
script. In that case, creating /dev/console in advance is not
necessary, but does not cause any problem either.
(From OE-Core rev: 0352841cd92f6316bcac092e2fff9d28c352b36b)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Replace all hard-coded paths with variables
* Run sed over busybox.links.* to replace /bin with ${base_bindir}
(From OE-Core rev: c61463a45441315b0006a28bb9f6069a393a8309)
Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Inherit update-alternatives so links are created. ifup
and ifdown are higher priority than the versions provided
by busybox.
(From OE-Core rev: d5e8c095fb6452c6b58526d242faedd2c653213d)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implements ifup and ifdown.
Copied from https://github.com/WindRiver-OpenSourceLabs/meta-overc.git
as of commit aa89eebffe06e4aa04701eae9691cb3049cbaef9.
(From OE-Core rev: c1d1ccf994d9204f481e12ccb4e63a7c448bc9cd)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds the public package-signing key into this package. It will be
installed under /etc/pki/rpm-gpg if the RPM signing feature is used. The
key file is not currently directly used by anything in the target
system. It is merely there for possible later use.
[YOCTO #8134]
(From OE-Core rev: f7359ad6bec82d4aa761287a6c6d53cbc25adab3)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
install nscd related configuration file, startup files, and package them,
make nscd easy to startup
(From OE-Core rev: 6d8351ac26295d2e5a693169bd2df95b89cb32fe)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LICENSE checksum has changed because the copyright year was changed
from 2014 to 2015 in it:
19e1afbd1c
(From OE-Core rev: 30e791e9bb2e28119e74c22af742957fc470b2de)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No-update reasons and manual version checks should be in the recipes
themselves because otherwise they're prone to getting out of date.
(From OE-Core rev: b384345d9a693cbc3fd0dbeed9edd8c24618259d)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
