In case of chained conversion methods are used via COMPRESS_CMD_*
there is chance that some of steps would be executed multiple times.
[YOCTO #9482]
(From OE-Core rev: 94f61c2682e5cfd819ac84535650c3e0a654415a)
Signed-off-by: Alexander D. Kanevskiy <kad@kad.name>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
IMAGE_CMD_xxx commands are always inlined within do_image_xxx.
When IMAGE_CMD_xxx is defined as a function (e.g. IMAGE_CMD_btrfs,
IMAGE_CMD_cpio, etc), a redundant copy of the function will be emitted
by default. Remove IMAGE_CMD_xxx 'func' flags to prevent that.
(From OE-Core rev: 118c1ca4d8d62162e87caf287f96d90707ee5903)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_split_package() constructs a list of packages that were created as it
iterates through the files, so if multiple files go into the same package then
the package will be repeated in the output.
Solve this by using a set() to store the created packages so that duplicates are
ignored.
(From OE-Core rev: b251f8b212f16b16b88183cc9a959d8cfa24fe3c)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit e69525: "kernel: Build uImage only when really
needed" hardcoded target kernel image to zImage for
case if uImage is generated by OpenEmbedded buildsystem.
However not all kernel architectures support zImage
target, for example AArch64 doesn't, so building of
kernel is failing on this step.
So instead of building zImage target that may not
exist for many architectures, build vmlinux target
that exists for all architectures.
Since kernel-uboot.bbclass uses vmlinux anyway for
creating image, there is no side effect on this change.
(From OE-Core rev: ac5d4d42a5903cbcafd7247c282df1cb98f79f08)
Signed-off-by: Ruslan Bilovol <rbilovol@cisco.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, write_deploy_manifest() was relying on
write_package_manifest() to create the subdirectory for the manifest
file. However, do_rootfs may be an empty function so that
write_package_manifest() will not be called and the manifest
subdirectory will not be created, causing a build failure. This patch
fixes that by creating the directory hierarchy inside
write_deploy_manifest().
[YOCTO #9446]
(From OE-Core rev: e2dbe5eb869b8336b91023b83d7ca866197efa73)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The value of APPEND is already being tracked and does impact on the
generated configuration file. This reverts the OE-Core:3c2d7ae5 commit
as it is not need anymore.
(From OE-Core rev: d396cd039ee9c5566670951a86907e8b736c2c7c)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #9487]
The debug filesystem file name is ending in "debug_tar", it should be simply
"tar". Strip the "debug_" piece as necessary.
To avoid deleting the tar ball, when we've asked for just the tarball we need
to check 't' and not 'realt'.
The two hunks were suggested by RP. I've implemented and verify they work
with the settings:
PACKAGE_CLASSES = "package_rpm"
IMAGE_GEN_DEBUGFS = '1'
IMAGE_FSTYPES_DEBUGFS = "tar.bz2"
IMAGE_FSTYPES_DEBUGFS = "tar.gz"
and
IMAGE_FSTYPES_DEBUGFS = "tar"
(From OE-Core rev: ca088bebfc3603ef206b20501916019f0572f955)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you configure a bz2 debugfs, pbzip2-native currently isn't built.
This patch makes sure the dependencies are added.
(From OE-Core rev: dd304a6fdc034d780e01e0055319e4a04aaad9d4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The python code expects AUTO_SYSLINUXMENU to be a boolean value,
otherwise the logic fails. This fixes the code comparing the value to
"1" which is the value expected by the shell script code, counterpart.
(From OE-Core rev: 5c5144806bfde7e19960fe8d841e4f6191ea5972)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* add separate variable for configuration options generated from
PACKAGECONFIG setting, this helps other bbclasses and recipes
to take advantage of PACKAGECONFIG mechanism, without including
other options from EXTRA_OECONF
* e.g. meta-qt5 recipes are abusing EXTRA_OECONF to get options
from PACKAGECONFIG:
EXTRA_QMAKEVARS_PRE +=
but with
conf/distro/include/no-static-libs.inc
it means getting --disable-static as invalid option inside
EXTRA_QMAKEVARS_PRE as reported by Alexandre Belloni who tried
to use poky with meta-qt5.
* once we migrate all bbclasses and recipes to PACKAGECONFIG_CONFARGS
we should also restrict EXTRA_OECONF append only to autotools.bbclass
like I did for cmake.bbclass
(From OE-Core rev: 0ea4a47bfc27d02594d489b27c029d3d3badf3d4)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Call write_deploy_manifest() in image postprocessing phase, instead of
rootfs postprocessing. The reason being that not necessarily all
do_deploy tasks are dependencies of the do_rootfs and we might miss
something.
[YOCTO #9446]
(From OE-Core rev: 1f35b05d60f4e84554c5ee837cb071815e12c91c)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel_do_deploy_append() uses DATETIME variable , so the taskhash
of the kernel_do_deploy() function changes if fitImage is used. The
buildsystem will complain accordingly:
ERROR: linux-yocto-4.4.3+gitAUTOINC+bcc6509084_1a72cec834-r0 do_deploy: Taskhash mismatch 49a5899a6895dcebd311dcb59870f370 verses 37c8dd3aae44134492a876f21c1b641b for /Yocto/poky/meta/recipes-kernel/linux/linux-yocto_4.4.bb.do_deploy
ERROR: Taskhash mismatch 49a5899a6895dcebd311dcb59870f370 verses 37c8dd3aae44134492a876f21c1b641b for /Yocto/poky/meta/recipes-kernel/linux/linux-yocto_4.4.bb.do_deploy
Fix this by excluding the DATETIME variable from the checksum.
(From OE-Core rev: 42ed25f693a4898f517c9ffc7920e5d994ac692d)
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a failure occurs early in the task, its possible we can have a
TaskFailed before the TaskStarted event can be triggered. This in
turn causes another traceback as the directory buildstats writes
files into doesn't exist.
Ensure the directory exists so we can see the original error.
(From OE-Core rev: bd0a65ec47ebf55c549c9ef276b201b72396ce2b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This class adds functions to the SDK creation hooks, so ensure that they're
ignored in task stamps.
(From OE-Core rev: b15b977d10b5165728c1238b8d67a73719d29d60)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The e5500 and e6500 cpu types are not supported by native qemu, set the value
of -cpu to e500mc. Without this change, build will fail for packages which use
qemuwrapper in compile phase due to the following error.
| Unable to find CPU definition
e.g. gobject-introspection
(From OE-Core rev: e06c5c5447350049ebd1a6245fc2dd2608b265e5)
Signed-off-by: Zhenhua Luo <zhenhua.luo@nxp.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change fs_link_table to be keyed by path, just like fs_perms_table.
When a new entry is coming in for either table, remove any previous
entry for that path. This way later permission file entries override
earlier ones.
[YOCTO #9430]
(From OE-Core rev: b7504ece784fad997e72f4cd89cdf73f24901541)
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Option '-w 100' of flock is failsafe to finish if dead lock occurs. It
should be impossible to occur dead lock. And option '-w' is not
supported by busybox, so remove it.
[YOCTO #9371]
(From OE-Core rev: 5cf97364685bfb86c6eeaffcebcad62ba9f93ee4)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Package names cannot contain underscores yet some npm modules use them as part
of the name, replace them with hyphens in the package name.
(From OE-Core rev: fea932c79c8201e3e7649f4443874ea540e33461)
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove duplicate ROOTFS_POSTPROCESS_COMMAND in the rootfs_command_variables list.
Add DEB_PREPROCESS_COMMANDS and DEB_POSTPROCESS_COMMANDS to rootfs_command_variables
list for consistency with the RPM_ and OPKG_ versions of those variables.
Note: the package manager specific pre and post process commands
may removed entirely in Yocto 2.2 or later.
(From OE-Core rev: e951a8970b456de71f6596f061211a48adce3e3a)
Signed-off-by: Bill Randle <william.c.randle@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the manifest link is broken then os.path.exists() returns False so the link
isn't removed, resulting in the os.symlink() call failing as the file already
exists. Prevent this by using os.path.lexists to check that the symlink itself
exists, not the target.
(From OE-Core rev: 018e3f9f215607a1d7c9fb7780236cc467f3103b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make the output from the task more informative about which directories
are being referenced.
(From OE-Core rev: 0e306a53c460302ec20192fc35930983781b7a2e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's some code dotted around OE that uses (a, b)[foo < bar] instead of the
more idiomatic "test and a or b". Or in this case, just max().
(From OE-Core rev: 7ee49f8a41b4b5c48fd283ac2768564c7ebb5332)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When processing links, the directories are processed in unsorted order
which can result in cases like /var/lock -> /run/lock handled before
/var/run -> /run throwing an error for /var/run because /run already exists.
Change the link processing to ensure links are processed in sorted order of
the destination.
[YOCTO #9430]
(From OE-Core rev: d71f4f54b4c22c9382bddce66c1580d875dcfef2)
Signed-off-by: Bill Randle <william.c.randle@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
URLs in MIRRORS and PREMIRRORS are vetted against a hard-coded list of protocols
which were missing sftp: and ssh:, so add them.
[ YOCTO #9444 ]
(From OE-Core rev: 036b26093e3c88dbb903a4a11d29c32c7516bc02)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The PACKAGES variable doesn't include all packages potentially
generated by a recipe, not least of all because it doesn't include
dynamic packages created via do_split_packages() or similar.
Instead of trying to guess which packages were generated, walk
${PKGDESTWORK}/runtime to find all package information that was
written to disk. This allows us to read all information for the
complete list of packages generated by the recipe.
For example before this patch we get SinglePackageInfo events for
9 packages from ncurses. With the patch applied we get 20 events
for all of the packages created during an ncurses build.
As a bonus we also switch to using the same postfuncs for both
do_packagedata and do_packagedata_setscene as they each result
in a PKGDESTWORK with the relevant directories and files
created.
[YOCTO #9115]
(From OE-Core rev: f1f012962a18d16b1cc22bde836cbb46fe9e6088)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, do_archive_sources will fail for the gcc tasks where there is
common source and the other tasks are not added as dependencies. The failure
happens when trying to restore these tasks from sstate.
To fix this ensure the sources directory is created as expected by the
sstate code.
[YOCTO #9433]
(From OE-Core rev: b3afe7d9bd25a943e947de3ec064ea245173c5a8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the dependencies injected by this class for recipes in ASSUME_PROVIDED
e.g. tar-native or chrpath-native are ignored. We need to use their "replacement"
names, e.g. tar-replacement-native.
This avoids broken archives and sstate failures with these recipes.
(From OE-Core rev: 2279c6d20c2a33283ce9a8d1ef91a8acdad0a20e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise the task hash changes between server and worker context
leading to changing task checksums.
(From OE-Core rev: c0a701a2165e858ec13b991943cc783bc4186fb9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we create hdddirect in the first time, and run bitbake to create
vmimg in the second time, then the previouse created
${IMAGE_LINK_NAME}.hdddirect may can not be found since it contains the
data string which are different. Use IMAGE_LINK_NAME to fix the problem.
(From OE-Core rev: 4aa8f67867a05bdf4a5ba90c8235740910662847)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
| DEBUG: Executing shell function do_image_elf
| Cannot open `/path/to/tmp/sysroots/qemux86-64/usr/src/kernel/bzImage': (null)
| WARNING: exit code 1 from a shell command.
The bzImage is in DEPLOY_DIR_IMAGE
(From OE-Core rev: 24536aa578e483fc2a8594628befa4c78a05681c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default value is 16K which is too big to create image for
core-image-minimal:
rootfs.btrfs is too small to make a usable filesystem
Minimum size for each btrfs device is 41943040.
Use 4K as ext2/3/4 to fix the problem.
(From OE-Core rev: a3e4dc0d800fbae3674b1657c872f70589fc893e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Many user/group operations will involve hashes which will include '$'
followed by a number or even possibly an env. variable name. Passing
$opts to flock requires that we take additional precautions to prevent
the unexpected expansion of these instances.
This was found by an image which used usermod operations to set the
password hash for root. The image could not be logged-in to and
examining /etc/shadow clearly showed that $0 and other $* variables
had been expanded unexpectedly. This change returnes the behavior to
what existed prior to commit 2ebf697b46c42cee8bfa6d2e6087397f8cce385c
[useradd_base.bbclass: replace retry logic with flock].
(From OE-Core rev: d80065642c5a1c95a298b235a8d575460147ede1)
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 2ebf697b46c42cee8bfa6d2e6087397f8cce385c [useradd_base.bbclass:
replace retry logic with flock] dropped the 3rd (retry) parameter for
these functions. These are simply being ignored now but we should
remove the retry count to avoid confusion.
(From OE-Core rev: 4ec99da681a6cd164ae177554b23c4fdf2194e2a)
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Current code in toaster_buildhistory_dump assumes that bitbake
target doesn't contain task name. It uses target as a part of
path to the files with data that it analizes. It fails to find
files if target contains task name. Stripping task from the
target should solve this.
(From OE-Core rev: 901c4f96c87bb557e747245685b7942624915670)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the user only builds iso + efi only, the syslinux-native which
provides isohybrid is required to build iso, so add syslinux-native to
DEPENDS.
(From OE-Core rev: dd1db8a578979a16d993a73b6f8a5720f2849932)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a recipe is added to the workspace, the signatures for the tasks
will change. This means that bitbake must be told to allow the
signatures to be different if they are in locked-sigs.inc.
This is done by creating an unlocked-sigs.inc file which contains all
the recipes in the workspace each time devtool reads the workspace.
So not only will necessary things get added, previously added items will
be removed by virtue of them no longer being in the workspace.
This also makes sure that the extensible sdk picks up unlocked-sigs.inc
as part of the configuration.
[YOCTO #9195]
(From OE-Core rev: 6b2b5ffdcb8bf885a1c756ea132e9d2c55e13dcd)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the extensible sdk we want there to be an error if a task tries to
run without signatures that match locked-sigs.inc. This patch enables
that error.
[YOCTO #9195]
(From OE-Core rev: fad9bbba1154d68b5dc808d2976aa6484cd49c91)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the SIGGEN_LOCKEDSIGS_TASKSIG_CHECK and
SIGGEN_LOCKEDSIGS_SSTATE_EXISTS_CHECK variables to replace
SIGGEN_LOCKEDSIGS_CHECK_LEVEL.
SIGGEN_LOCKEDSIGS_TASKSIG_CHECK will no control whether there is a
warning or error if a task's hash in the locked signature file doesn't match
the computed hash from the current metadata.
SIGGEN_LOCKEDSIGS_SSTATE_EXISTS_CHECK will control whther there is a
warning or error if a task that supports sstate is in the locked
signature file, but no sstate exists for the task.
Previously you could only have warning/errors for both controlled by
SIGGEN_LOCKEDSIGS_CHECK_LEVEL. This was an issue in the extensible sdk,
because we know sstate won't exist for certain items in the reverse
dependencies list for tasks. However, we still want to error if task
signatures don't match.
[YOCTO #9195]
(From OE-Core rev: 0fe2a5e5ffd01e926d0f3d4c78ad9910296e2d1a)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Existing compress framework for producing various compressed versions
of images is powerfull enough to be extended for other uses, e.g. to
convert types of images.
It is possible to use it also to produce image checksums at the time
of image generation. This commit adds support for all supported
at the moment coreutils hashing algorithms: md5, sha1, sha224,
sha256, sha384 and sha512
Usage:
IMAGE_FSTYPES_append = " hddimg.sha256sum"
(From OE-Core rev: 1fbd27122ac4403b8688bc41d128602564a05506)
Signed-off-by: Alexander D. Kanevskiy <kad@kad.name>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
At present, if a recipe is built which creates users/groups via
useradd.bbclass, those users/groups are not removed from sysroot
when the recipe/package is cleaned using clean/cleansstate/cleanall
or when a recipe is rebuild and 'unstaged' from the the sysroot.
The "userdel_sysroot_sstate()" provides that functionality.
[YOCTO #9262]
(From OE-Core rev: b5304ce438666a7418746f4ddd32703ae3188089)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A path variable is assigned the value of PATH from the
environment, before the PATH is set on the environemnt
from the value of PATH in the bb datastore. This seems
to be an unnecessary leftover.
[YOCTO #8543]
(From OE-Core rev: a3c7c5148017c652661f2c5f79d90aa80dcb479b)
Signed-off-by: Alex Franco <alejandro.franco@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a recipe passes for example extra_depends="${PN}-dev" to do_split_packages()
then it isn't expanded, so the check for the multilib prefix doesn't work.
Solve this centrally by expanding extra_depends inside do_split_packages().
[ YOCTO #9381 ]
(From OE-Core rev: d3875a8111f1d88dcc83219d4700784050988ca3)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel tools assume git > 1.7.9.5, I'm unsure of the exact version but
the oldest in our infrastructure is 1.8.3.1. The git fetcher also currently
has nasty workarounds for git < 1.7.9.2.
Moving to 1.8.3.1 as our minimum version seems sane at this point as the oldest
we're testing/supporting.
[YOCTO #6162]
(From OE-Core rev: dbae075f62ecceadacc6d847e5697b9f3339b168)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
An unprivileged "container" environment like this[1] doesn't have root
account (uid 0) which causes tons of "Invalid argument" warnings:
$ bitbake ...
...
WARNING: Could not copy license file [src] to [dest]: [Errno 22] Invalid argument: '[src]'
WARNING: Could not copy license file [src] to [dest]: [Errno 22] Invalid argument: '[src]'
WARNING: Could not copy license file [src] to [dest]: [Errno 22] Invalid argument: '[src]'
...
Fix it by handling EINVAL similar to existing handling of EPERM (which
was added for when not running under pseudo).
[1]: The real environemnt is buildFHSUserEnv from NixOS/nixpkgs, but a
demonstration of the issue can be done like this:
$ touch f
$ unshare --user --mount chown 0:0 f
chown: changing ownership of ‘f’: Invalid argument
(From OE-Core rev: d00b2250a6afebd7d1373c04b4006290f0cd4043)
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use a unique tempfile as the temporary git index file when determining
the git hash of the source tree. A fixed filename was obviously causing
races (with the git index.lock file) under oe-selftest where multiple
bitbake instances were run against the same source tree at the same
time.
(From OE-Core rev: f81c641022c26a9b89fac769e0f2889eaec5d32f)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix a minor grammatical error in the comments here.
(From OE-Core rev: ddc60aea113e587f27df03645620d6eb677ff28a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For images we produce a number of filtered dependency .dot files for
readability, the first of which is depends-nokernel.dot which filters
out just the kernel itself (not kernel modules). Unfortunately the
filter specifications hadn't been updated for the dash-to-underscore
removal or the 4.x kernel upgrade, thus the filtering wasn't actually
doing anything.
(From OE-Core rev: ec1077bed0c1538084bceeafb957abe725b13b76)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Invoking oe-pkgdata-util in turn for every package in the list was slow
with a large image. Modify oe-pkgdata-util's read-value command to take
an option to read the list of packages from a file, as well as prefix
the value with the package name; we can then use this to get all of the
package sizes at once. This reduces the time to gather this information
from minutes to just a second or two.
Fixes [YOCTO #7339].
(From OE-Core rev: 51c24904cc1bc823bccc3f179b8d7a192dace168)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise the task hash changes between server and worker context
leading to changing task checksums.
(From OE-Core rev: b5ab6111dbf21d2fc6a6e4aeaa9f105e3e0a23ac)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise the task hash changes between server and worker context
leading to changing task checksums. The dependency data here is
tracked by other pieces of the signature.
(From OE-Core rev: 1962571a7358fb9c9af2d6cfd1a01673b0d18193)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During the simplication and cleanup of branches and kernel meta data
handling, the ability to force build a branch that didn't match the
meta data was dropped.
There are valid uses cases when a different branch should be built
(testing, development, etc), so we restore the capability with this
change.
If after the kernel meta data is processed the current branch does
not match the SRC_URI specified branch, a warning is generated
about the impending branch switch and that the user should double
check that they are building what they expect.
WARNING: After meta data application, the kernel tree branch is standard/base. The
WARNING: SRC_URI specified branch standard/gt. The branch will be forced to standard/gt,
WARNING: but this means the board meta data (.scc files) do not match the SRC_URI specification.
WARNING: The meta data and branch standard/gt should be inspected to ensure the proper
WARNING: kernel is being built.
Reported-by: Steve Sakoman" <steve.sakoman@intel.com>
(From OE-Core rev: d91a668bc0f6c2cfc52174b4039c7ea0d84e8d4d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
package_qa_check_libdir() reports that the file libsoletta.so.0.0.1-gdb.py
in /usr/share/gdb/auto-load is in the wrong location. Before generating
a warning for files in non-standard locations, check that the file is an
actual elf file (and hence a real library file).
[YOCTO #9215]
(From OE-Core rev: a3ad36b9a435e7c3d97f114809561198b8abe6cf)
Signed-off-by: Bill Randle <william.c.randle@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use APPEND for grub's root device may cause confusion, for example, when
building efi + pcbios, there maybe be two root=/dev/ram0, one of them
would be carried to the installed target, and the target would fail to
boot. Use GRUB_ROOT to fix the problem, and remove SYSLINUX_ROOT from
APPEND will fix the problem.
[YOCTO #9354]
(From OE-Core rev: 1f46fe7d501644c83f81dc4cc3310073c804f797)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PACKAGECONFIG doesn't work in cross-canadian recipes at the moment as
DEPENDS are prepended with mlprefix.
A recipe is either nativesdk, native or target so adjust the if
statements accordingly, use inherits_class for more accurate recipe
classification and add cross-canadian support.
(From OE-Core rev: 4a172868a9423afb8a602413ef4935423ce51a5d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes the code a bit shorter and more readable.
(From OE-Core rev: f092f99a0d7116ba4347b22f3f81b4eac4808e62)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The debugfs prefix is striped from t, but not from baset.
Therefore baset never matches t.
(From OE-Core rev: 2862cbf74925cb084d3f9c206d3448112ba6a0aa)
Signed-off-by: Freudiger Raphael <raphael.freudiger@siemens.com>
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
base.bbclass sets 'check_license' to False (and therefore skips
license checking completely) for native, nativesdk, etc recipes
(ie anything which could potentially be classed as "host tools"),
so supporting a dedicated whitelist of GPLv3 host tools is not
necessary.
(From OE-Core rev: 8fc8b60005e7641861324c8541fb45058e7aab8e)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It has been done in syslinux.bbclass.
(From OE-Core rev: 4bbd512c4eef6c449d99dbe35271dafc6e7bfe03)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move the common code to live_vm_common.bbclass and remove duplicated ones.
(From OE-Core rev: 4a70cc59a0350f06d4cc48c12c3053a39191ba07)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
They are doing the same things: create live images, merge them into one
bbclass makes it easy to understand.
(From OE-Core rev: bfd4d95210b3f841aa2e7c5a06ac89667523438d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
They are doing the same things: create virtual machine images, merge
them into one bbclass makes it easy to understand.
(From OE-Core rev: c314fda9d739560b6a08e627e7aabf105d97c8c4)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously the list of packages that are considered unneeded for a
read-only rootfs was hardcoded. This made it impossible to, e.g., have
shadow installed on a system with a read-only rootfs, but where /etc
is mounted writable.
This also lists ${VIRTUAL-RUNTIME_update-alternatives} rather than
update-alternatives (as was previously the case) since this should
actually remove the intended package.
(From OE-Core rev: e3b881d4168e5b02ff00f5c470ba472ab8bbc747)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If SDK_EXT_TYPE is set to "minimal" then the SDK won't contain many
sstate artifacts, and you're required to set up an sstate mirror in this
case anyway so there's no point publishing the "stub" sstate-cache
directory from within the SDK since it won't be useful for update
purposes and may be confused with the real sstate-cache.
There is however a possibility that people might publish the real
sstate-cache directory under the same output directory provided to
oe-publish-sdk, thus deleting it after extracting (as we were doing with
other files we wanted to clean up at the end) would be problematic,
besides which extracting it and then deleting it is wasteful. Thus,
introduce a "-p" command line option to the SDK installer that we can
use to tell tar not to extract the items we don't want when publishing.
This has the added benefit of mostly keeping references to these in the
place they belong i.e. in populate_sdk_ext.bbclass.
(From OE-Core rev: 774b85d42db1d81936d4e4af4f6fb2c57cb51d2c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When running bitbake you may pass in values of variables from the
external environment (making use of BB_ENV_EXTRAWHITE), and you may
choose to do this when building the extensible SDK, for example:
MACHINE=qemuarm bitbake -c populate_sdk_ext core-image-minimal
You would naturally expect those settings to be reflected in the
extensible SDK itself; however they were not, since we were only
considering local.conf and auto.conf. Check the variables mentioned in
BB_ENV_EXTRAWHITE to see if any are different than the values set in
local.conf/auto.conf and add lines setting them in the SDK's local.conf
if so.
Fixes [YOCTO #9339].
(From OE-Core rev: 2bfed75c48a6f6596ded9cb64cb96f00510f914e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The mkisofs requires syslinux/isolinux.bin which is provided by
target syslinux, for pcbios, the depends is already there, but for
EFI, it isn't, so add the depends.
(From OE-Core rev: e9adedd32a7f2015e58efe2f460a99e8d745b4c6)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the sanity code encounters a version change is doesn't understand, the current
output is unreadable and confusing for the user, particularly due to the presence
of the backtrace.
Use improved functionality in bitbake to improve this and correctly pass python
exceptions around.
[YOCTO #9291]
(From OE-Core rev: a0860e308645f17dbf4b9005b2fc0e9869d730bf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are various concerns about md5 so use sha256 instead.
(From OE-Core rev: a88603cb2ffd4f995e16349a389902eb884252e5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a do_deploy_archives_setscene, but no addtask.
(From OE-Core rev: 81db27c208468dc460e9d8f0063ad24b2b37dc97)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found that ssize_t was being wrongly computed for mips64 musl
because it was using wrong cache files.
alias them to glibc versions, musl doesn't _yet_ have target
incompatibilities to note in siteinfo thankfully.
Add musl aliases for aarch64 and ppc64 targets
(From OE-Core rev: d3867743e7028046454dc135efeefadfa382f463)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
buildhistory_get_imageinfo() assumed that the buildhistory directory
for the image had already been created earlier. That assumption is not
true for special images (like the virtual swupd images from
meta-swupd) where the entire traditional do_rootfs/do_image is
skipped.
Creating files-in-image.txt still makes sense for such images, so
support them by creating the directory also in
buildhistory_get_imageinfo().
(From OE-Core rev: 723328319ee53235969ec9cce7ff5d7729dcf8d7)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tweak DEBUG_FLAGS to use "/usr/src/debug/${PN}/${EXTENDPE}${PV}-${PR}"
as source target path in DWARF. While use gdb to debug binary, it could
work with sources in dbg package.
While -fdebug-prefix-map is used for compiling, we do not need invoking
debugedit to edit DWARF at do_package time, but list where sources files
are.
The copydebugsources uses the list to copy sources to dbg package. It
works whether -fdebug-prefix-map used or not.
[YOCTO #9305]
(From OE-Core rev: ecb56a6ae0c870af680da03db9d39703b525fc98)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Extend the srctree_hash_files() function in externalsrc.bbclass to
handle non-Git source trees. If the source tree is not a git
repository, srctree_hash_files() now simply adds the whole source tree
as a dependency, causing bitbake to basically hash every file in it.
Hidden files and directories in the source tree root are ignored by the
glob currently used. This has the advantage of automatically ignoring
.git directory, for example.
During the first bitbake run preparing of the task runqueue may take
much longer if the source tree is not a git repository. The reason is
that all the files in the source tree are hashed. Subsequent builds are
not significantly slower because (most) file hashes are found from the
cache.
[YOCTO #8853]
(From OE-Core rev: a797abe08bfe4144e120c984d1718c2cc3d87c0a)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Be a bit more intelligent than mindlessly re-compiling every time.
Instead of always using 'nostamp' flag for do_compile run a python
function to get a list of files to add as 'file-checksums' flag. The
intention is to only re-run do_compile if something in the source tree
content changes.
This python function, srctree_hash_files(), works differently, depending
if the source tree is a git repository clone or not. If the source tree
is a git repository, the function runs 'git add .' and 'git write tree'
to get a hash of the working tree and writes this hash into a file under
the .git directory. This file containing the hash is then returned as
the file for the task to depend on. Hash is changed if any changes are
made in the source tree causing the task to be re-run. A trick is used
to parse the recipe every time so that the hash file gets updated.
If the source tree is not a git repository behaviour remains the same.
In this case srctree_hash_files() currently sets the 'nostamp' flag for
do_compile causing it to be re-run every time.
This method of tracking changes source tree changes to determine if
re-build is needed does not work perofectly, though. Many packages are
built under ${S} which effectively changes the source tree causing some
unwanted re-compilations. However, if do_compile of the recipe does not
produce new/different artefacts on every run (as commonly is and should
be the case) the re-compilation loop stops. Thus, you should usually see
only one re-compilation (if any) after which the source tree is
"stabilized" and no more re-compilations happen.
[YOCTO #8853]
(From OE-Core rev: a26becdf981b35d7ef8524f9e65c25a74b842f1d)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is pointless to archive several times the gcc source.
This change will archive gcc source once, for the gcc-source-{PV}
recipe.
[YOCTO #9327]
(From OE-Core rev: 2f53fb2ae561e2eb599682ba95ce83ad1b4b7ada)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new class uses gio-querymodules tool on postinst and postrm.
This regenerates the module cache which is useful to avoid loading
modules that are not needed at runtime: If a Gio module is not
listed in the cache file it will always get loaded.
* Add a postinst-intercept 'gio-module-cache': it runs
gio-querymodules using qemuwrapper. This is required because the tool
actually loads the modules to generate the cache.
* Add a gio-module-cache class that adds postinstall and postrm
scripts. In the sysroot population case use the new intercept.
* Inherit the new class in glib-2.0, glib-networking and gconf.
Fixes [YOCTO #9241].
(From OE-Core rev: 168cf5502a2dda78348cc9679e37bed0c69c0208)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently do_wicenv task is run for all images. However, its
result is used only to produce wic image. It's better to
run this task only for wic images. If another rootfs is
required to produce wic image, dependency to its do_wicenv
must be added to the wic image recipy.
Stopped running do_wicenv for all images. Added explicit
dependency to this task in wic-image-minimal recipe.
[YOCTO #9095]
(From OE-Core rev: b81c176fb2f1ee818b6049c39ef353a7d7d5e078)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Return early in write_image_manifest () if the IMAGE_MANIFEST
variable is unset. This allows us to prevent writing of the
manifest where we prevent images being created for a recipe by
unsetting IMAGE_FSTYPES.
(From OE-Core rev: 54387be24d6a157574496f1b20b21c7fc2a51d3e)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new value is more general and better reflects what having the feature really means.
Introspection data, then, is built only if 'gobject-introspection-data' is in
DISTRO_FEATURES and 'qemu-usermode' is in MACHINE_FEATURES.
(From OE-Core rev: 9927a3d72e2272d8e3dc4785ba02e27802ee1c6c)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes kernels which package sb16 firmware e.g.
directories were installed but not shipped in any package:
/lib/firmware/sb16
/lib/firmware/sb16/ima_adpcm_playback.csp
/lib/firmware/sb16/ima_adpcm_init.csp
/lib/firmware/sb16/mulaw_main.csp
/lib/firmware/sb16/ima_adpcm_capture.csp
/lib/firmware/sb16/alaw_main.csp
(From OE-Core rev: 826bc56e77bd9a53f6bc19548549f6d92de09911)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make this class more clear and consistent, and avoid
confusion with the Intel C compiler (icc); the changes
affect function names, and calls to those functions
[YOCTO #8934]
(From OE-Core rev: daf59103c26ca8f1be7229f73a5b496d862e1f1e)
Signed-off-by: Alex Franco <alejandro.franco@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Expanding PACKAGE_ARCH might be necessary as it is being
checked against to determine if this is allarch
[YOCTO #8934]
(From OE-Core rev: 45c59ffb742568e4f0d8cf53e4dfba5198bdc9f0)
Signed-off-by: Alex Franco <alejandro.franco@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Additional check for inheritance of allarch.bbclass, for when
checking that PACKAGE_ARCH == "all" is not enough to be sure
a recipe is "allarch"; e.g. nativesdk-buildtools type recipes
[YOCTO #8934]
(From OE-Core rev: 0f9a3b445186b58d2c1f731da94c6b3a05494369)
Signed-off-by: Alex Franco <alejandro.franco@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A python string literal isn't meant to be split over multiple lines
unless it is explicitly multi-line. Use three quotes to indicate that.
(From OE-Core rev: 8cdb505bb3d9748be1744f36cbbfb4f62fa20b67)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
patchelf will understandably error out if there isn't a .interp section to
relocate, so don't try to relocate static binaries.
(From OE-Core rev: 2a1803e64174825d9392094ae6e680a1ac96eb4a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When archiving the original source, the git repositories have the name as
they are in the $DL_DIR plus the source revision; i.e.
"git.yoctoproject.org.linux-yocto-4.4.git.89419d8b90_dadb436904.tar.gz".
This change set the tar name to $PF.tar.gz instead, to have consistency with
the others archives created by the class.
(From OE-Core rev: 3f903cb767150e316337929d72559cad6931039a)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bitbake couldn't add the task ar_configured when
trying to archive the configured source for
gcc-source-${PV} recipes. This is because the task
depended in the do_configure and this task doesn't
exist for gcc-source.
This fix allows to archive configured gcc-source recipe.
(From OE-Core rev: 5be5eae2e1630a151a9f5866d60325d439150ced)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently do_unpack_and_patch() and do_ar_configured() are using
the ARCHIVER_OUTDIR as the ARCHIVER_WORKDIR, this lead to have
duplicated files inside the tars when using the archiver class
for patched and configured source.
(From OE-Core rev: 09dfc99a813090043262529beb6d900900e983dc)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the dumpdata task expands python data in the datastore, in
some functions this causes a silent error and the task will fail.
The change also rewrite the function to make a bit clearer.
(From OE-Core rev: e3239ade430ff48e00dce47066abe8fcb990af61)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a user upgrades their host distro, it may no longer have all the
required tools installed, but this won't be caught by bitbake resulting
in possible build errors. Rather than check for installed tools on every
startup, use the NATIVELSBSTRING change as indicator to rescan for host
tool dependencies. Store the NATIVELSBSTRING in the sanity_info file.
[YOCTO #8585]
(From OE-Core rev: e838b581397bbea9a0f4d74648fcc250073db1ae)
Signed-off-by: Bill Randle <william.c.randle@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Typically in a node/npm compiled modules the module is named .node. This is a
binary module without a wrapper so it can actually be relatively large if
unstripped.
(From OE-Core rev: d14bc2667575bc0e29b9e90d80c01703639b76f1)
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
syslinux.bbclass should not be seen when use efi.
(From OE-Core rev: f994eef0aeae861857756d3cc05c49cca17bd12b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Make it can build vm and live (e.g., iso + vmdk) together as we did
for syslinux.
* GRUBCFG -> GRUB_CFG as other GRUB_FOO vars
(From OE-Core rev: e38039e43f22d55a443064efa91752e2943fda79)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
- Found potential conflicted var LABELS ...
Set LABELS to "boot install" would build out broken images when build
vm + live together, use set_live_vm_vars() to fix the problem.
- Use ROOT and LABEL in boot-directdisk.bbclass and image-foo.bbclass,
they are not only used by syslinux.bbclass, but also grub-efi.bbclass,
add "SYSLINUX_" prefix would mislead users.
(From OE-Core rev: d7d1e0193c94abb1cd2daf1c298c8c1788f3616d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Limit search for a version var name to start at the beginning of a line,
otherwise, if the var name is used in a comment, that comment line will
be replaced, rather than the desired assignment line.
Move bblayer update message into function where it's actually updated,
rather than assuming all successful config file update are to the
bblayers.conf file.
Replace a stray tab with spaces for consistency.
[Fixes YOCTO #9318]
(From OE-Core rev: 7c1e53bb802f021f06231243077d0e007a64274c)
Signed-off-by: Bill Randle <william.c.randle@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The python-expect is not installed on the distro such as Ubuntu by
default, and we can get rid of it.
Use RPM_GPG_PASSPHRASE to replace of RPM_GPG_PASSPHRASE_FILE which is
more straightforward.
(From OE-Core rev: 4a8a74c62836a20610daf029d4cec0b3087758b2)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The npm class just installs whatever is in ${S}; if you're using
externalsrc in conjunction with it the symlinks (oe-workdir and oe-logs
by default) plus singletask.lock will end up in the final package, which
isn't really right. Introduce a variable so we know the path the files
will be installed into within npm.bbclass, and append to do_install
within the workspace bbappend to delete the files.
(From OE-Core rev: 766845e06db9d7d595e836ea1364c16fa132a413)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of skipping the build system preparation step within the
extensible SDK install process when SDK_EXT_TYPE is "minimal", run
bitbake -p so that the cache is populated ready for the first time
devtool is run.
(From OE-Core rev: 6b38a991a3475fb82889428b94563968c7570473)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to see the output of the setup script in the error message
because what we are having bbfatal print here doesn't completely
describe what went wrong, thus we should use bbfatal_log here and not
bbfatal.
(From OE-Core rev: 970a02061b474a238f57cd0cc4db7b62e36dfa3d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If ptest isn't in DISTRO_FEATURES, there won't be any -ptest packages
and thus no need for the -ptest package for the packagegroup either.
(From OE-Core rev: 52f9b12601c02f1585438f890f847b4596170362)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE-Core commit 8981ed20234c42dc1f5cdef802ebe7214bd55238 (from 2013)
caused a regression where -dbg/-dev/-ptest packages weren't generated
for packagegroups because we weren't setting ALLOW_EMPTY for them.
Break out the code for adding complementary groups to its own
conditional so we can set ALLOW_EMPTY at the same time.
(From OE-Core rev: 340e9d619c881f320070474d5c4674dcaeabad35)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have a common build directory for all target architectures if
externalsrc is used and ${B}=${S}. In this case we also need to have a
common stamp directory. The reason is that e.g. changing MACHINE will
basically "invalidate" the artefacts in ${B} (wrt. to the new MACHINE)
but old stamp files with matching hashes from an earlier build might be
available in the machine-specific stamps directory and tasks would not
be correctly re-run.
Previous attempt in f44f12af346888bdeb3ae01a275cb5dd4396b505 to handle
this correctly was faulty as it threw some spurious warnings and caused
do_configure to be re-run in every build if that would not be necessary.
[YOCTO #8950]
[YOCTO #9237]
(From OE-Core rev: f5031fb37ceef83c85f0dfec773da75c05b2a631)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Whitespace and comment updates only, no functional changes.
(From OE-Core rev: 738393ea98baec364d3da117a1307a39d348b660)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default file pattern may be amiguous and "meld" might not always
be the preferred tool, so allow distros to override those parts of the
error messages.
(From OE-Core rev: 98fc50436dfa5d0e5bee0930154a5563ffc8151d)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code now iterates over different config files, but always printed a
message about conf/bblayers.conf for each file.
(From OE-Core rev: af55727fc1920c4c23476304f57a3720835ec203)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ${WORKDIR} variable was not getting expanded (anymore?), leading to
less helpful error messages like:
Exception: NotImplementedError: Your version of bblayers.conf has the wrong LCONF_VERSION (has 7, expecting 8).
Please compare your file against bblayers.conf.sample and merge any changes before continuing.
"meld conf/bblayers.conf ${COREBASE}/meta*/conf/bblayers.conf.sample"
is a good way to visualise the changes.
ERROR: Execution of event handler 'check_sanity_eventhandler' failed
After adding expansion, embedding ${LCONF_VERSION} and ${LAYER_CONF_VERSION}
in the error message seems a bit more readable and consistent.
(From OE-Core rev: 7fd08497cf780018fa144a870bdea0e7a69dae20)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When perform useradd during populate sysroot, it locks files passwd.lock
and group.lock at same time. And then it meets a dead lock issue
randomly.
Use flock to reslove it by using an universal lock directory for all the
user and group related operations.
[YOCTO #9022]
(From OE-Core rev: 2ebf697b46c42cee8bfa6d2e6087397f8cce385c)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The list of variables influencing do_rootfs was not updated when
introducing ROOTFS_POSTUNINSTALL_COMMAND. As a result, making changes
in commands listed there or the variables they depend on did not trigger
a re-run of do_rootfs.
(From OE-Core rev: 66b461ce9df7ed06d7651b9b54a49a950b97a1d4)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If no -std= option is passed to icu's configure, it defaults to CXX11.
This isn't what we want for uninative, so pass an explicit option
which selects an older ABI on newer versions of g++.
This avoids the __cxa_bad_array_new_length@CXXABI_1.3.8 symbol
being used.
(From OE-Core rev: ac59063bee0e32d0737340974f657341717a6abe)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've recently added SDK_EXT_TYPE and SDK_RECRDEP_TASKS and these will
have an effect on the size and functionality of the SDK, so record them
in sdk-info.txt.
(From OE-Core rev: 1be0ae80f97bdee758232ec5397c09d73d57e1e0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a package depends on itself apt-get fails to install it with the
error attached to this patch.
This patch checks for this conditions and notifies the user so the
recipe maintainer can fix his RDEPENDS variable.
root@qt5022:~# apt-get install perl-module-cpan
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
perl-module-cpan
0 upgraded, 640 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/5964 kB of archives.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n]
E: Internal error: MaxLoopCount reached in SmartUnPack (2) for
perl-module-cpan:amd64, aborting
E: Internal error, packages left unconfigured. perl-module-cpan:amd64
root@qt5022:~# apt-get install perl-modules
(From OE-Core rev: d8bf148c3b740254ed23d52cf244f0f6e9c7a4ab)
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The dictionary cannot be used for iteration if its size may change
during the loop.
ERROR: Error executing a python function in
/home/ricardo/curro/qt5022/build-qt5022/repo/yocto/meta/recipes-devtools/perl/perl_5.22.0.bb:
Exception: RuntimeError: dictionary changed size during iteration
Acked-by: Aníbal Limón <anibal.limon@linux.intel.com>
(From OE-Core rev: 04aa40be126e00e2eb97311510e4d3ea90bfe7eb)
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Inheriting image-buildinfo.bbclass primarily slowed down image
building for two reasons:
1. The content of the shell command "buildinfo" gets expanded
multiple times, each time again checking the state of all
layers.
2. When expanded as part of the actual image creation, git
is invoked under pseudo, which makes the check quite a bit
slower (from a few seconds to a minute with many layers).
To fix this, buildinfo now is a Python method which calls the checks
only when really executed. Pseudo is told to unload itself when
starting git.
In addition, "git diff" is invoked with "--quiet", which avoids
producing output that is just getting thrown away. As before, any kind
of problem or output causes the layer to be marked as "modified".
[Revision 2 of the change with some dead code removed]
(From OE-Core rev: e59547e4154b772a36f4e58f1d454c0c38653c84)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to make sure that our fixed vapigen.m4 is used instead.
(From OE-Core rev: 3086dbaabaa5eccd05e091bed9ff0bdf707113fa)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signing package feeds will default to ascii armored signatures (ASC) the
other option being binary (BIN). This is for both rpm and ipk backends.
(From OE-Core rev: 862a3892feb2628282e1d6f2e4498a7a3bd60cbf)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implement ipk signing inside the sign_ipk bbclass using the gpg_sign
module and configure signing similar to how rpm does it. sign_ipk uses
gpg_sign's detach_sign because its functionality is identical to package
feed signing.
IPK signing process is a bit different from rpm:
- Signatures are stored outside ipk files; opkg connects to a feed
server and downloads them to verify a package.
- Signatures are of two types (both supported by opkg): binary or
ascii armoured. By default we sign using ascii armoured.
- Public keys are stored on targets to verify ipks using the
opkg-keyrings recipe.
(From OE-Core rev: a40f27aa7802e8a0bd87a5417e35adbface62d05)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were previously ignoring pkgs that came in from a setscene like from
an sstate mirror). With this patch we can use pkgs than come from sstate
for image customisation as well.
Also remove unused variable.
[YOCTO #9137]
(From OE-Core rev: 4ea7f96ae28ff53867f5ffa4158076761676d288)
Signed-off-by: brian avery <brian.avery@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 00d3fd571a8d261d065b43f5cf3076a381843984)
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Executables built with -fpie have the ELF type DYN rather than EXEC
which makes them difficult to distinguish from shared libraries.
Currently when building the list of executables we omit these binaries
so they might fail to run on the resultant rootfs due to missing
symbols. One of these is systemd which builds -fpie unconditionally, so
mklibs breaks images containing systemd.
Modify the search to catch all executable files that are ELF and have an
interpreter set. Omit libc and libpthread as special cases because they
have an interpreter and are directly executable but treating them as
such is antithetical to the pupose of mklibs.
(From OE-Core rev: 30da34ef032d5b4b2f694743715f2c8d64dd9849)
Signed-off-by: Tyler Hall <tylerwhall@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 8b81bb56c69aabdea984352f8e267a9783c0bdbc was accidentally merged.
The DL_DIR piece was simply incorrect and should be removed.
The patch commit message should have mentioned that the changes were
to update populate_sdk_ext after the changes to uninative now the
download is placed into a specific directory in DL_DIR. We also
need to specify the uninative tarball checksum.
(From OE-Core rev: be177739b46d3296c0c0c01310b499ffc6782d43)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than rolling all of an npm module's dependencies into the same
package, split them into one module per package, setting the SUMMARY and
PKGV values from the package.json file for each package. Additionally,
mark each package with the appropriate license using the license
scanning we already do, falling back to the license stated in the
package.json file for the module if unknown. All of this is mostly in
aid of ensuring all modules and their licenses now show up in the
manifests for the image.
Additionally we set the main LICENSE value more concretely once we've
calculated the per-package licenses, since we have more information at
that point.
(From OE-Core rev: 8226805f83d21e7c1d2ba21969f3e8ee4b137496)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The class had qemu_run_binary() which was not suitable for gobject-introspection,
as it required the name of the binary to run.
qemu_wrapper_cmdline() returns just the command line string needed to run
binaries, and does not require the binary name.
(From OE-Core rev: 0b68f0632312392cbd20bfcb9ed4895cfc9883ff)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Clean up the code which gathers buildstats for Toaster,
and modify the field names so that the correct parts of the
buildstats files are used to derive the CPU usage values.
Also derive elapsed time for the build here, rather than in
Toaster, as we have ready access to the data in the correct
format.
[YOCTO #8842]
(From OE-Core rev: c145624ccc77ffd07a0b4c368c0dfce525e17eac)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the metadata for multiple layers will be put into the sdk, anytime
those layers change the sdk needs to be rebuilt. Ideally, this would use
checksums to only rebuild when necessary.
However, since this feature needs to be in the release, opt for a less
intrusive change by setting the task to nostamp. Unnecessary rebuilds
may occur, but it's better than a user wondering why their changes
didn't get added.
(From OE-Core rev: d801547f6fe4315da6476ed9fc4ccca2a6983421)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We get below host contamination warnings of license files for
each recipe, when we try to create a separate ${PN}-lic package (which
contains license files), by setting LICENSE_CREATE_PACKAGE equal to "1"
in local.conf.
-- snip --
WARNING: QA Issue: libcgroup: /libcgroup-lic/usr/share/licenses/libcgroup/generic_LGPLv2.1 is owned by uid 5001, which is the same as the user running bitbake. This may be due to host contamination [host-user-contaminated]
WARNING: QA Issue: attr: /attr-lic/usr/share/licenses/attr/libattr.c is owned by uid 5001, which is the same as the user running bitbake. This may be due to host contamination [host-user-contaminated]
WARNING: QA Issue: bash: /bash-lic/usr/share/licenses/bash/COPYING is owned by uid 5001, which is the same as the user running bitbake. This may be due to host contamination [host-user-contaminated]
-- CUT --
Since the license files from source and OE-core, are populated in a normal
shell environment rather in pseudo environment (fakeroot); the ownership of
these files will be same as host user running bitbake. During the do_package
task (which runs in pseudo environment (fakeroot)), os.link preserves the
ownership of these license files as host user instead of root user.
This causes license files to have UID same as host user id and resulting in
above warnings during do_package_qa task.
Changing ownership of license files to root user (which has UID and GID as 0)
under pseudo environment will solve above warnings, and on exiting pseudo
environment the license files will continue to be owned by host user. Perform
this manipulation within try/except statements, as tasks which are not exected
under pseudo (such as do_populate_lic) result in OSError when trying to
change ownership of license files.
(From OE-Core rev: a411e96c3989bc9ffbd870b54cd6a7ad2e9f2c61)
Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It makes sense to use the compression mechanism also for conversion,
for example of a whole-disk image into .vdi (VirtualBox). That part
already works, like this:
COMPRESSIONTYPES_append = " vdi"
COMPRESS_CMD_vdi = "qemu-img convert -O vdi ${IMAGE_NAME}${IMAGE_NAME_SUFFIX}.${type} ${IMAGE_NAME}${IMAGE_NAME_SUFFIX}.${type}.vdi"
IMAGE_DEPENDS_vdi = "qemu-native"
But then it also makes sense to allow compressing the resulting image,
which only works after enhancing the image.bbclass.
For example, suppose a custom image command produces "dsk" images. Then
it becomes possible to set
IMAGE_FSTYPES = " dsk.xz dsk.vdi.xz"
and do_image_dsk will automatically produce the intermediate images,
convert to dsk.xz resp. dsk.vdi -> dsk.vdi.xz and delete all
intermediate images. Symlinks are also set correctly.
(From OE-Core rev: 588f14370372a66329b54606071175519ce88f1e)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch for making the .rootfs configurable was incomplete: in the
python create_symlinks() method the new variable must be expanded
explicitly.
Not doing so broke the symlink creation and that led to hard build
failures in image types depending on the boot-directdisk.bbclass (like
qcow2) because the build_boot_dd() method relied on the symlink.
(From OE-Core rev: 0d02159c8d66bb136f7da2c10fda7d1a57f40cec)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default, the image file name contains ".rootfs" to distinguish the
image file from other files created during image building. However,
for certain image types (for example, .hddimg) the ".rootfs" suffix is
redundant because the type suffix alone already uniquely identifies
the main image file (core-image-minimal-intel-corei7-64.hddimg instead
of core-image-minimal-intel-corei7-64.rootfs.hddimg).
With this change, distros that prefer the shorter image name can
override the .rootfs suffix unconditionally with
IMAGE_NAME_SUFFIX ?= '' in their distro configuration
or with some condition check like this:
python () {
if <whole-disk image format active>:
d.setVar('IMAGE_NAME_SUFFIX', '')
}
The exact logic when to remove the extra suffix depends on the distro
and how it enables its own image type.
(From OE-Core rev: 380ee36811939d947024bf78de907e3c071b834f)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This class was only used by Hob, and since Hob has now been removed we
can drop it as well.
(From OE-Core rev: b8db070926a7ec294816bc6648eb12db7f126f26)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
uninative hand codes the list of files which need relocation, add the libc
to that list to ensure GCONF_PATH is updated.
(From OE-Core rev: f8a9819a2ef3ebf4b40633e9308b66671aa9af83)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to be able to update uninative if the version changes. To do this,
stash a checksum of the installed uninative tarball into a file. If this
changes, we update uninative.
For cleaner download messages, we place the tarballs into directories
based on the checksum.
(From OE-Core rev: f767f94295032792d84fd323bffee137a6467e01)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move duplicate code into a common function
(From OE-Core rev: 1a6b39ccd55e6b26f9eb4e05089b8b97396d53d5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We may see binaries built with gcc5 run or linked into gcc4 environment
so use the older libstdc++ standard for now until we don't support gcc4
on the host system. https://wiki.debian.org/GCC5 has more details about this.
(From OE-Core rev: 1925ead3828dcd50ef96212c2d1ea9c35bc9f13c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous attempt at soft-failing when uninative was enabled didn't actually
work, because the workers didn't evaluate the function that actually enabled
uninative.
In a BuildStarted handler we can check if we need to download or extract the
uninative tarball.
In a ConfigParsed handler on the workers we can check if the uninative loader is
present, and if so enable it.
(From OE-Core rev: 75fc9a8d408640d97481d310084b212a01dc5f8b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
uninative needs to adjust NATIVELSBSTRING fairly late in the
configuration parsing process but the sstate code encodes it into
variables. Since this string doesn't vary on a per recipe basis, we
defer its expansion until usage time.
(From OE-Core rev: fb680ab8b3cf7aba9b579403b1aeb96d30762320)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Prelinking on x86-64 wasn't working out the box as it uses /lib and
not /lib64 for libs. Prelink was refusing to link as the dynamic loader
didn't match its idea of the right path. Passing in the --dyanmic-linker
option avoids this.
We can share code from image-mklibs so abstract that into a new class,
linuxloader.bbclass.
This does break prelinking of multilib images, I've opened a bug so we
can loop back and fix that problem, the code would need to iterate the
dynamic loaders (and setup ld.so.conf files for it).
(From OE-Core rev: 7c3f2f61536cc8e0322087558cdcfe29ee2fac6d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Prelink contains some hardcoded assumptions about the path layout of
the target system. Unfortunately if the system doesn't match, prelink
doesn't work. This breaks:
a) prelink of those images
b) the unsafe-references-in-binaries QA test (which uses prelink-rtld)
One way to work around this is to construct an ld.so.conf file which
lists the library paths in question. We do this in sanity QA check and
in the rootfs prelink code, being careful not to trample any existing
target ld.so.conf.
There is an additional problem that $LIB references in RPATHs won't be
handled correctly, I've not see any system use these in reality though
so this change at least improves things.
(From OE-Core rev: 7fd1d7e639c2ed7e0699937a5cb245c187b7c811)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a build-sdk command which is only available within the extensible
SDK that builds a derivative extensible SDK. The idea is recipes in the
workspace become a part of the new SDK - for example, this allows taking
a vendor provided SDK, adding a few libs and then producing a new SDK
with those included.
When normally building the extensible SDK, the workspace is excluded;
here we need to copy into the new SDK (renaming it in the process); the
recipes' task signatures become locked and thus the sources are no
longer needed, so they are removed along with the workspace bbappends
which would interfere with the locked signatures. Additionally we need
to just copy the configuration files (i.e. local.conf and auto.conf)
rather than filtering and appending to them since that work has already
been done when constructing the original SDK. The extra sstate artifacts
from workspace recipes are also determined and copied into the new SDK
in minimal mode (on the assumption that you won't set up a new sstate
mirror).
This reuses some code from build-image, so that needed to be
generalised to allow that.
Implements [YOCTO #8892].
(From OE-Core rev: 59e207ff6dd4b50a8905e14bc9292cf2794f4e7a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, the checking for unsafe references is not strict enough. It
only checks whether '/usr/' is in the script. As a result, any script
containing statements like below will match this check.
PATH="/bin:/sbin:/usr/bin:/usr/sbin"
However, as we can see, this is actually not an unsafe reference. What
we really want to check is something like '/usr/bin/tail', so we should
make the checking stricter.
This patch solves the QA warning in gzip and nfs-utils.
(From OE-Core rev: f818f7359c1a5db2c5c041c42eecb9f0434d9800)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With empty LABELS variable build_efi_cfg skips most of its
functionality producing warning message:
'LABELS not defined, nothing to do'
This causes build failure for efi images.
Setting default value for LABELS to 'boot install' should fix
this issue.
(From OE-Core rev: b8cb64714cb9ca3174f11a245ee1cf5367dd432f)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code in oecore_update_bblayers() handling the transition from
meta-yocto to meta-poky was not very resilient. It would, e.g.,
mistake meta-yocto-bsp for meta-yocto if the former occurred before
the latter in BBLAYERS.
The code also failed to update multiple existences of meta-yocto in
the bblayers.conf file, e.g., if it was present in
BBLAYERS_NON_REMOVABLE in addition to BBLAYERS (which it is by
default).
(From OE-Core rev: 8deb14898f351bd33950291ccde7c4458c6cf506)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #9161]
(From OE-Core rev: f350bedf745b356a74e3a15d82055472796580fe)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* The vm image(hdddirect, vmdk, qcow2, vdi) and live image (hddimg, iso)
couldn't be built together because the following vars settings are
conflicted:
- SYSLINUX_ROOT (/dev/sda2 vs /dev/ram0)
- LABELS (boot vs boot install)
- INITRD (None vs live install)
- SYSLINUX_CFG (see above)
Introduce new vars (SYSLINUX_ROOT_VM/_LIVE, the samilar to others) to
make them can work together, now we can build all of them together:
IMAGE_FSTYPES += "live iso hddimg hdddirect vmdk qcow2 vdi"
* Use SYSLINUX_CFG rather than SYSLINUXCFG to keep align with others
SYSLINUX vars.
* The SYSLINUX_TIMEOUT had been set, but it didn't work since
AUTO_SYSLINUXMENU wasn't set, this would cause confusions, so also set
AUTO_SYSLINUXMENU.
* Move SYSLINUX_PROMPT and SYSLINUX_TIMEOUT to syslinux.bbclass rather
than in separate classes since they are the same.
* Set SYSLINUX_TIMEOUT to 50 to have a unique timeout for syslinux.
[YOCTO #9161]
(From OE-Core rev: e38c94d6bf83ed3ca7f046d9503e81b927487bf2)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the oe-workdir / oe-logs symlink exists and points to a different
path then the symlink needs to be removed before calling os.symlink() or
it'll fail.
(From OE-Core rev: cb8f064e48c24dcb1a15a32cef3399f35e549bdc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is possible that LCONF_VERSION won't be set, such as if meta-poky is
used. Without this change, bblayers.conf would have LCONF_VERSION =
"None" if LCONF_VERSION wasn't set, which would cause a sanity check
failure.
(From OE-Core rev: 914b0a99997d8c69eafcb34dd982f46540eed882)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, the pre/post process command variables are parsed as shell, even
though they're not shell anymore. As a result, an empty SDK_PACKAGING_FUNC
results in a parsing error. Rather than manually adding their vardeps, only
append its ; when the var is set.
(From OE-Core rev: f836f4bfd83862a1a0da7d4cc20ae9eaf62118da)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When installing the ext sdk, buildtools is extracted and installed as
well. The tar file containing buildtools isn't used after installation
so was wasted space and clutter.
[YOCTO #9172]
(From OE-Core rev: 0dc7d3179a605c10987ee836dd179ffeb14d0ba5)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The rest of the environment setup script prepends to PATH, so when we
add the path to run devtool we should be prepending as well. This
also ensures that when you run the environment setup script from
extensible SDK installation A and then in the same shell session run the
environment setup script from installation B, and then run devtool, that
you're running B's devtool and not A's.
Fixes [YOCTO #9046].
(From OE-Core rev: b7ac987274f7aeaeacc217488cf4fe639de81b76)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Quite a few external kernel modules I've found floating around don't
have a modules_install target, but they do have an install target that
basically differs only in name. To make it easier to build these just
make this a MODULES_INSTALL_TARGET variable that you can set from the
recipe - the alternative would be copy-and-paste the do_install
definition from this class which is potentially fragile.
(From OE-Core rev: effa6ce777540c5557e5cf904b48cc3369ee3f9f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sanity update code needs to be passed an int, not string.
(From OE-Core rev: 390bad905537820f49add855c95d726b5b55c8fa)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ssh_allow_empty_password function doesn't check if
sshd_config_readonly exists before running sed which can result in an
error if sshd_config exists but sshd_config_readonly doesn't.
(From OE-Core rev: dc4e3d31852084a75faf224882d1ab19d07de8fe)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tcname is needed for eSDK update testcase will be used for
publish it and then try to update
(From OE-Core rev: a75944a63482597be88ff0f3ce55025647b78e2c)
Signed-off-by: Aníbal Limón <limon.anibal@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The removal of bitbake and scripts PATH is only needed by eSDK tests
so move to eSDK context only.
This also it's a support for eSDK update test because it needs to
execute oe-publish-sdk from scripts.
(From OE-Core rev: 4ae0c84568f39661722cbceba8ddab22cffe5003)
Signed-off-by: Aníbal Limón <limon.anibal@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to the neeed to use in other modules.
(From OE-Core rev: a25aef2bdefae54c8b3eb2bd4afec5a86110ddc7)
Signed-off-by: Aníbal Limón <limon.anibal@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When running ext-sdk-prepare.py during sdk installation a check is done to
make sure no tasks would run that aren't provided by the "leaf" recipes
specified in SDK_INSTALL_TARGETS.
However sometimes an image recipe can cause other images to be created
such as an initramfs. So make sure those additional images are
recognized by ext-sdk-prepare.py and don't flag an error.
(From OE-Core rev: 6eb75df1000ce1905e83840204adb614659d25cf)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The IS_VM was used for making menus for vmdk, vdi and qcow2, except
hddimg, there is no reason to not make menus for hddimg, so drop it.
(From OE-Core rev: c5a402bcd0ebf0238f7f7f8bcc08a0790cba7a67)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No one uses it.
(From OE-Core rev: d2eba0a5b67936983ad85766349f7afa4bdb70e8)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modify existing default test suites to reuse the new
generic test suites.
Related to [YOCTO #8410]
(From OE-Core rev: 1da1bbc88b1ec1476107003f47f7b240d0794165)
Signed-off-by: Alex Franco <alejandro.franco@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add generic test suites MINTESTSUITE, NETTESTSUITE, DEVTESTSUITE to
group common test suites.
Add DEFAULT_TEST_SUITES_pn- variables for:
* core-image-minimal-dev
* core-image-full-cmdline
* core-image-x11
* core-image-lsb
* core-image-lsb-dev
New default test suites use generic test suites.
Existing default test suites not modified.
[YOCTO #8410]
(From OE-Core rev: 8d194c6300964a393b6b69b7d06c0a729a5f8b5f)
Signed-off-by: Alex Franco <alejandro.franco@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is not guaranteed Linux kernel was configured with process I/O
statistics enabled. If process I/O statistcs are not present, issue
a one time warning and do not attempt to read the non-existing stats
counters.
[YOCTO#9025]
(From OE-Core rev: b39e84edb02d03102b9a571c21e5328c159c4378)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the classes after the addition of the npm fetcher to
match the other fetcher additions.
(From OE-Core rev: b91c5c94182ce08d4daccf85eaa0375daefc356e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
npm class supports the npm fetcher, helping doing the basic compile/install
stages of an npm package
(From OE-Core rev: 4d2ad3e39242c947612023f4429bc8fb430551b5)
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the addition of the npm fetcher, we add the native dependency
handling too.
(From OE-Core rev: 500c432419739e2be247d6feea3f4d85eb7ddfd0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Right now, only one configuration file can be processed (conf/bblayers.conf)
and it can only have one version number. This is a cause of immense friction
between OE-Core and Poky since if one needs a version change, it shouldn't
be forced on the other.
We'd like to rename the meta-yocto layer (within the meta-yocto repository)
to meta-poky. To do this, we need to correct the bblayers.conf file and that
means changing the sanity version. After the pain this caused the last time,
Paul made me promise never to have them out of sync between OE-Core and Poky,
equally, having every distro changing config update OE-Core isn't scalable
either.
This patch changes the sanity upgrade method to list a more generic format:
<config file>:<current version variable name>:<required version variable name>:<upgrade function>
This in theory allows us to support upgrades to any of the core
configuration files, and allow layers to extend them as needed. Files
with the same name can be handled in different layers by setting a unique
version name variable in the file itself. The upgrade code is only called
if the version variable is set.
To allow us to make the poky name change and use a new configuration file
name, one last version bump is included for poky to handle the transition.
(From OE-Core rev: 10fd24271e771ed12e36edcff0007caa1a4e67e4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_image can modify the content of the rootfs directory so we need to run
do_rootfs_wicenv after do_image compeltes or the command can fail.
(From OE-Core rev: 8f5429b5e543e122072a51b518cc137dfc8ec442)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously the keys were put into the os-release package. The package
indexing code was also deploying the keys rather than only using the keys.
This change makes signing-keys.bb the only publisher of the keys and also
uses standard tasks that already have sstate.
(From OE-Core rev: 1e38068ac38dfd067655dfd41464e28439179306)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sdk_extraconf() method of setting the configuration was awkward
since you needed to set it in a class and then inherit that class since
function definitions aren't allowed in conf files. It seemed to me the
a neater way to do this was to read the extra lines from an additional
conf file sdk-extra.conf (which can be located in a conf/ directory
anywhere along BBPATH as with other configuration files).
(From OE-Core rev: b53edb86c65ad375df153017f245244ef97f3932)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
INHERIT += "typecheck"
$ bitbake -p
ERROR: Failure expanding expression auto none ${@" ".join(o.name for o in oe.terminal.prioritized())}
which triggered exception AttributeError: 'module' object has no attribute 'terminal'
(From OE-Core rev: 74bc2a65ec18c749d9343d9a33eccae93726846c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
$ bitbake quilt -crecipe_sanity
File "/path/to/poky/bitbake/lib/bb/siggen.py", line 261, in dump_sigtask
p = pickle.dump(data, stream, -1)
PicklingError: Can't pickle <COWDict Level: 1 Current Keys: 0>:
attribute lookup bb.COW.C failed
This is because of:
cfgdata[k] = d.getVar(k, 0)
If d.getVar(k, 0) is a DataSmart (for example, BB_ORIGENV), it won't
have the attribute of bb.COW.C, so the error happend.
(From OE-Core rev: 9979f8ad588564cd9d177e24a28ceefefec4df7d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
IMAGE_FSTYPES_append = " hddimg"
$ bitbake -g core-image-minimal-initramfs
NOTE: Resolving any missing task queue dependencies
NOTE: Preparing RunQueue
ERROR: Task /path/to/core-image-minimal-initramfs.bb (do_bootimg) has circular dependency on /path/to/core-image-minimal-initramfs.bb (do_image_complete)
ERROR: Command execution failed: Exited with 1
This is because IMAGE_FSTYPES = "${INITRAMFS_FSTYPES}", and if
IMAGE_FSTYPES append hddimg, then core-image-minimal-initramfs.bb would
be circular dependency:
do_bootimg -> do_image_complete -> do_bootimg.
Now we check and error out.
(From OE-Core rev: 9b48bfbc2f60bdaa792a98485db68699e0635cbe)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
in sdk,there are some utils in sysroot/host-os/bin, sysroot/host-os/sbin/,sysroot/host-os/usr/bin need to use, so add these three paths to PATH in env.sh.
(From OE-Core rev: 1116572916443109176c0df32efc275eceeb706a)
Signed-off-by: Jun Zhang <jun.zhang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently there isn't a way for the extensible sdk to know all the tasks
that will need sstate for an image. This is because a layer can add it's
on custom tasks that are required for an image to be generated.
The extensible sdk solved this for poky by using recrdeptask and
specifying the tasks known to be required for the image as well as for
building new recipes.
So the SDK_RECRDEP_TASKS variable allows a user to specify additional
tasks that need to be pulled in.
(From OE-Core rev: 4236b9653f6dfbddc937108bbbd9a9445eb81382)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes a problem where SDK_INSTALL_TARGETS wouldn't pick up the
value in SDK_TARGETS. It also removes the inline python to make the
code more readable.
(From OE-Core rev: 5b7bc7ab44c2cc5d5f217d9ad81a210ea053dc85)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As of commit OE-Core:773c9e18071d71454473dd81aff911104a2e9bc6
EXTRA_OECONF is appended with the option --disable-static on
DISABLE_STATIC variable and this cause the error:
waf: error: no such option: --disable-static
So, we need to disable this option.
(From OE-Core rev: cc100a291853c89efbf2c0c04bd9626a6546f4c7)
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Refactor the LocalSigner class. Do not store keyid or passphrase file in
the signer object as they are only needed for some of the methods. For
example, the newly added verify() method does not need any key
parameters and export_pubkey only uses keyid.
(From OE-Core rev: e2412294b6b1d3a80ee97a0706613349edc51d33)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is useful for oe newbie:
* build-deps: print recipe name, and suggest fixing from DEPENDS or
PACKAGECONFIG, for example:
WARNING: QA Issue: patch rdepends on libattr, but it isn't a build dependency, missing attr in DEPENDS or PACKAGECONFIG? [build-deps]
* file-rdeps: print RDEPENDS_pkg rather than RDEPENDS, for example:
WARNING: QA Issue: /sbin/osd_login contained in package nfs-utils requires /bin/bash, but no providers found in RDEPENDS_nfs-utils? [file-rdeps]
Fix a bug in file-rdeps, there was "@underscore@" in file-rdeps:
WARNING: QA Issue: /sbin/osd@underscore@login_nfs-utils contained in [snip]
[YOCTO #8922]
[YOCTO #8847]
(From OE-Core rev: f8754281451bbb64c3d26bbdbf1e596271534469)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The functionality got broken after bitbake commit
8bf33a8e92c0e188fa392030025756196c96fcbb
which disabled the (bitbake) variable expansion inside python functions.
(From OE-Core rev: 51c6ea30060eeddf93e4255cbd3847fc6aedaf9f)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, do_rootfs depends on variables like SDK_OS, SDK_OUTPUT, etc.
And changing variables like POPULATE_SDK_POST_HOST_COMMAND doesn't cause
do_populate_sdk to rerun.
This patch separates variables so that do_rootfs and do_populate_sdk could
correctly depend on their related variables.
[YOCTO #8670]
(From OE-Core rev: 590cf4be70f1355622d3a94d76b4cc6d525d4a34)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's no point doing the autotools sanity checks if a recipe didn't inherit
autotools, so check the inherits before doing the checks.
Also pass -F (fixed strings) and -q (quiet) to grep.
(From OE-Core rev: 75ae572427d9cd3f0b3e9e7d4d0e7a93a4f04690)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
autotools was inherited for some functions some time ago, but now all it's using
it for explicitly is autotools_do_install(), which is basically just "make
install". Invoke that directly and we can remove the inherit autotools.
(From OE-Core rev: 1cbc0400621c23243d96dedf4a226a732f5c87c9)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of raising a generic Exception that can't be handled specifically, raise
a ValueError. Also update the callers so any unexpected exceptions are not
ignored.
Also, rename isBigEngian() to isBigEndian().
(From OE-Core rev: c136652f9c0b35aafa393e63567daf029ae03929)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: a6426479f6348524a904ba28c16c1e3c8793cb08)
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
buildhistory.bbclass by design is incremental: each build adds or
updates information. Information is never removed.
Sometimes it can be useful to reduce the information only to those
recipes that were build during a specific bitbake invocation, for
example when the invocation does a full world build.
This is now possible by setting BUILDHISTORY_RESET as explained in the
modified class. The comment on the variable also mentions the caveats
associated with using this mode.
In this mode, buildhistory.bbclass first moves all existing
information into a temporary directory called "old" inside the build
history directory. There the information is used for the "version
going backwards" QA check. Then when the build is complete and before
(potentially) committing to git, the temporary directory gets deleted.
Because information that has not changed during the build will be
reconstructed during full world rebuilds, a git log will then only
show real updates, additions and removals.
(From OE-Core rev: 51f4eb5bfcd25f7160e50314f433cad126aa3e9a)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Variable expressions are no longer expanded in python functions as of
BitBake commit 8bf33a8e92c0e188fa392030025756196c96fcbb, so we've now
got to do this explicitly here.
(From OE-Core rev: 60fd4ff61a4ad240a89d48553002901c10e93178)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the addition of a common class passing in this option, add it to
the list of standard "unknown" configure options which are known about.
Its not interesting/productive to go and update every recipe to handle
this flag.
(From OE-Core rev: f879f452dc69989aa227b8dc60b7cb0354203575)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its valid to have dependencies like XXX (=2.1) without spaces, as injected
by debian.bbclass. The code was breaking these into separate components
and destroying them so improve the regex to handle them.
(From OE-Core rev: 613e96b06202f31870be411ca45b44237ae55b1c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Alexander D. Kanevskiy
Ross Burton
Andre McCurdy
Ruslan Bilovol
Markus Lehtonen
Otavio Salvador
Mark Hatle
Richard Purdie
Martin Jansa
Marek Vasut
Zhenhua Luo
Dan McGregor
Kai Kang
Brendan Le Foll
Bill Randle
Joshua Lock
Robert Yang
Mark Asselstine
Ed Bartosh
Randy Witt
Maxin B. John
Alex Franco
Bjørn Forsman
Paul Eggleton
Bruce Ashfield
Ulf Magnusson
Freudiger Raphael
Peter Kjellerstedt
Khem Raj
Patrick Ohly
Hongxu Jia
Mariano Lopez
Jussi Kukkonen
Alexander Kanavin
Ricardo Ribalda Delgado
Ioan-Adrian Ratiu
brian avery
Chris Austen
Tyler Hall
Elliot Smith
Jagadeesh Krishnanjanappa
Chen Qi
Christopher Larson
Jonathan Liu
Aníbal Limón
Juro Bystricky
Jun Zhang
Fabio Berton
Ming Liu