Received a patch from Robert P. J. Day but deleted it from
my Thunderbird account so could not apply it directly.
I applied most of his corrections. A couple I left alone.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 2cadd5265fcb5cc281c22ccae81260a6633229e2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3664
Added some information in the note to point out that not all
append files add files into the mix. Some just exist to add
build options. And, in this case the _prepend part of the
FILESEXTRAPATHS statement is not necessary.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 388c441341006227be2f9e7d42bb1c509c32790d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 3272f0d51e3d09f4ffd96b7322f66ffd878d3714)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two things fixed:
1. A couple examples for setting up a layer.conf file were
using the meta-yocto configuration file as an example.
Turns out this is a bad example because the BBPATH variable
is appended to the LAYERDIR when setting BBPATH rather
than the other way around. That is because meta-yocto
is a distro layer. BSP layers, however, are not distro
layers and are the norm here. So I switched up the way
BBPATH was set and actually called out meta-yocto-bsp
config file as a template.
2. Added a link for the BBPATH variable in the
FILESYSTEM_PERMS_TABLES variable description in the
glossary. Just happened to notice this so I fixed it
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 1a594b6dde1a494a5f7322b510e1e67d23635298)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3662
I added more information to the variable desription in the
glossary for BBMASK. The information included a bit more
syntax information as well as some more complex examples.
I added more reference information to the "Excluding Recipes
From the Build" section to help better describe how the
BBMASK variable works.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: f10f43a543e7b0892863e165d2902741a8823009)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed YOCTO #3662
Updates to the description so _prepend is used to add paths
to the front of the search order and use of the variable
without _prepend just adds paths to the end of the
FILESPATH order.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 44c98058c1a75a9e6c95e4f33dbe1696e23d97d0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3662
New entry added.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 73f8b28f6b6cea16cf63b99db88c961f87088fe1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The chunk.quietly option disables the output of the docbook
chunker. Creation of a new html file is now longer printed to the
console. This provides a much cleaner output of the eclipse makefile
target.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When calling the eclipse target twice without calling clean in between
the figures folder was copied as a subfolder of the existing figures
folder. This patch fixes the copy command to correctly copy the
figures folder.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The script tools/eclipse-help.sed is used to convert links that
point to other documentation parts. This avoids having to leave
the eclipse help center when clicking these links.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The file is used when creating eclipse help html files. It processes
all html files and converts links so that the user can navigate
between different docuementation parts without leaving the eclipse
help center.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Eclipse help documents are now created when calling the 'make all'
target on the yocto-project-qs. Resulting files are archived into
the tarball as well. When calling 'make clean' artefacts of
the eclipse documentation build are deleted.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The fake title section is converted into a docbook
article.articleinfo. If used with a custom title page this will lead
to the excapt same output. But I will enable the creation of metadata
from this title information.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This target will generate eclipse help for the yocto-project-qs using
the yocto-project-qs-eclipse-customization.xsl stylesheet.
The output will be generated to a separate directory which can be used
for integrating the documentation into eclipse.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This stylesheet uses the eclipse stylesheets of docbook to create
eclipse help from this documentation. In addition to simple html
files these stylesheets will also create xml files which are
needed to integrate the documentation into eclipse (e.g. toc.xml).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The quick start guide is currently not using a title information to
set the title of the document (e.g. article.title or
article.articleinfo.title).
As other output formats may use the title information to create
metadata this information has to be added to the document. To preserve
current style of the document a custom title page has to be used. With
this for instance 'article.title' can be used instead of the
fake-title section currently used, leaving the style intact.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Standard stylesheet parameters were moved to the docbook customization
file tying them to the docbook stylesheet used. Removing these
parameters simplifies the Makefile.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Eclipse help documents are now created when calling the 'make all'
target on the poky-ref-manual. Resulting files are archived into
the tarball as well. When calling 'make clean' artefacts of
the eclipse documentation build are deleted.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The title of the document used to create metadata for output formats
such as eclipse help.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This target will generate eclipse help for the poky-ref-manual using
the poky-ref-manual-eclipse-customization.xsl stylesheet.
The output will be generated to a separate directory which can be used
for integrating the documentation into eclipse.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This stylesheet uses the eclipse stylesheets of docbook to create
eclipse help from this documentation. In addition to simple html
files these stylesheets will also create xml files which are
needed to integrate the documentation into eclipse (e.g. toc.xml).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Standard stylesheet parameters were moved to the docbook customization
file tying them to the docbook stylesheet used. Removing these
parameters simplifies the Makefile.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Eclipse help documents are now created when calling the 'make all'
target on the kernel-manual. Resulting files are archived into
the tarball as well. When calling 'make clean' artefacts of
the eclipse documentation build are deleted.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The title of the document used to create metadata for output formats
such as eclipse help.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This target will generate eclipse help for the kernel-manual using
the kernel-manual-eclipse-customization.xsl stylesheet.
The output will be generated to a separate directory which can be used
for integrating the documentation into eclipse.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This stylesheet uses the eclipse stylesheets of docbook to create
eclipse help from this documentation. In addition to simple html
files these stylesheets will also create xml files which are
needed to integrate the documentation into eclipse (e.g. toc.xml).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Standard stylesheet parameters were moved to the docbook customization
file tying them to the docbook stylesheet used. Removing these
parameters simplifies the Makefile.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Eclipse help documents are now created when calling the 'make all'
target on the bsp-guide. Resulting files are archived into
the tarball as well. When calling 'make clean' artefacts of
the eclipse documentation build are deleted.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The title of the document used to create metadata for output formats
such as eclipse help.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This target will generate eclipse help for the bsp-guide using
the bsp-guide-eclipse-customization.xsl stylesheet.
The output will be generated to a separate directory which can be used
for integrating the documentation into eclipse.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This stylesheet uses the eclipse stylesheets of docbook to create
eclipse help from this documentation. In addition to simple html
files these stylesheets will also create xml files which are
needed to integrate the documentation into eclipse (e.g. toc.xml).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Standard stylesheet parameters were moved to the docbook customization
file tying them to the docbook stylesheet used. Removing these
parameters simplifies the Makefile.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Eclipse help documents are now created when calling the 'make all'
target on the dev-manual. Resulting files are archived into
the tarball as well. When calling 'make clean' artefacts of
the eclipse documentation build are deleted.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The title of the document used to create metadata for output formats
such as eclipse help.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This target will generate eclipse help for the dev-manual using
the dev-manual-eclipse-customization.xsl stylesheet.
The output will be generated to a separate directory which can be used
for integrating the documentation into eclipse.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This stylesheet uses the eclipse stylesheets of docbook to create
eclipse help from this documentation. In addition to simple html
files these stylesheets will also create xml files which are
needed to integrate the documentation into eclipse (e.g. toc.xml).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Standard stylesheet parameters were moved to the docbook customization
file tying them to the docbook stylesheet used. Removing these
parameters simplifies the Makefile.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Eclipse help documents are now created when calling the 'make all'
target on the adt-manual. Resulting files are archived into
the tarball as well. When calling 'make clean' artefacts of
the eclipse documentation build are deleted.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The title of the document used to create metadata for output formats
such as eclipse help.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This target will generate eclipse help for the adt-manual using
the adt-manual-eclipse-customization.xsl stylesheet.
The output will be generated to a separate directory which can be used
for integrating the documentation into eclipse.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This stylesheet uses the eclipse stylesheets of docbook to create
eclipse help from this documentation. In addition to simple html
files these stylesheets will also create xml files which are
needed to integrate the documentation into eclipse (e.g. toc.xml).
Additional parameters are required so resolve links between different
documentation parts inside eclipse.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Standard stylesheet parameters were moved to the docbook customization
file tying them to the docbook stylesheet used. Removing these
parameters simplifies the Makefile.
Furthermore supporting new output formats can now be achieved by
creating a new customization file containing its corresponding
parameters. Parameters that are used across different stylesheets with
different values will then be separated through different
customization files.
Global parameters can still be set through the XSLTOPTS variable since
this precedes the parameters in the customization file.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The title of a pdf document is part of the image used on the title
page. Thus the title defined (e.g. bookinfo.title) in a document
should never be used when creating title pages for pdf documents. As
other output formats may use the title information to create metadata
the title has been removed from the template.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The use of arch specific variables like MIPSPKGSFX_ABI was creeping
into the -native sstate checksums of package like ncurses-native.
This is pointless and undesireable. We could add specific variable
exclusions but we might as well just brute force the code to be disabled
in the -native case since we don't use multilibs in the native case.
[YOCTO #3827]
(From OE-Core rev: cc7352ed990b1bdd26203a4d3b21286280ac26c5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were seeing errors like:
| autoreconf: running: /srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly/build/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf --force
| configure.ac:27: error: possibly undefined macro: AS_IF
| If this token and others are legitimate, please use m4_pattern_allow.
| See the Autoconf documentation.
| configure.ac💯 error: possibly undefined macro: AC_MSG_ERROR
| autoreconf: /srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly/build/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf failed with exit status: 1
| ERROR: autoreconf execution failed.
which turns out to mean the pkgconfig macros were unavailable (thanks for clear
error messages autoconf).
This patch adds in the missing dependency.
(From OE-Core rev: 26431ffda8886412147ff347c000a0ecc2671db5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Though the value of variables in the BB_BASEHASH_WHITELIST is kept out of the
checksums, dependency on them is not, at least for variables and non-task
functions. In the code, the whitelist is removed from the overall task dep
list, but not the individual variable deps. The result of this is that
functions like sysroot_stage_all and oe_runmake end up with whitelisted
variables like TERM listed in their dependencies, which means that doing
a 'unset TERM' before building will result in all checksums for tasks that
depend on those changing, and shared state reuse not behaving correctly.
This is only really a potential issue for variables from the environment, as
it's the existance/removal of the variable that's an issue, not its value, and
the other whitelisted variables are set in our metadata. This which means in
practical terms the only cases where this is likely to be an issue are in
environments where one of the following are unset: TERM, LOGNAME, HOME, USER,
PWD, SHELL. This may seem like an unlikely circumstance, but is in fact a real
issue for those of us using autobuilders. Jenkins does not set TERM when
executing shell, which means shared state archives produced by your jenkins
server would not be fully reused by an actual user.
Fixed by removing the whitelisted elements from the individual variable deps,
not just the accumulated result.
(Bitbake rev: dac12560ac8431ee24609f8de25cb1645572d350)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you have:
FOO = "a"
FOO += "b"
FOO+= "c"
The expected result is "a b c" however we were seeing "a b" with the FOO+
variable being assigned the value "c". This isn't the expected result.
We need to make the name part of the variale non-greedy so that any + character
becomes part of the operator. This patch does that. I compared the configuration
in OE-Core before and after the change and only the test case changed.
[YOCTO #3834]
(Bitbake rev: 2cd8d7fd12a646e6516e2c985e6a54121d19eb59)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
unit files are added to util-linux itself when selected
(From OE-Core rev: dbabe19d4ee5cc291b5d996e9b828eed3e4484d8)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Timo Mueller
Richard Purdie
Christopher Larson
Khem Raj