The metadata started using the bb.utils.contains_any which has been
add in the BitBake 1.23.0 release, set this as the minimal version to
ensure parsing compatibility.
(From OE-Core rev: dea40c2850a32b5b67e90336f9565889f92dabe8)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update PREFERRED_PROVIDERS after cross tooling name change to include PN.
Also drop the now obsolete gcc-intermediate which no longer exists.
(From OE-Core rev: 5cbb5c12a5656915c3c9752187b54ef095d42828)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For use outside of tests themselves, we want a better error than
AssertionError, so create one and allow us to request it when calling
runCmd(). This enables us to avoid tracebacks during master image
operations if the power control command fails.
(From OE-Core rev: 89868383685091b0d3723fb8f29590f3f6610078)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we couldn't start the target, it doesn't make sense to try and stop
it here since logically it shouldn't now be in any kind of "started"
state. (It's the start function's job to clean up after itself if it
fails - to that end, fix up the QemuTarget class so that it does.)
(From OE-Core rev: 819ebddae6b78120e5e082423793ff988419b5c4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of powering up the target when the object is constructed, wait
until deploy is called. Then there are basically two different
scenarios:
a) The device is booted into the master image already, in which case
we can just use it
b) The device is booted into another image or can't be contacted, in
which case we need to power cycle it. Here we also now wait until it
has booted up instead of trying to contact it immediately.
(From OE-Core rev: c2257fa50071e4704a8152b5f1d16f899b4bed98)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Similar to power control command, this depends on a user's setup to get to
the serial port of a board. For a local connected board this could just be:
TEST_SERIALCONTROL_CMD = "picocom /dev/ttyUSB0 -b 115200"
and for a serial console server: "telnet 10.11.12.13 7003" or some conmux
command.
(From OE-Core rev: 5131094ad8f53b2052a97efd505e7a170d0c915d)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
And drop the un-needed and un-used restart methods.
Only qemu ever used this and actually does it safely.
(From OE-Core rev: 1dd1edb5ea551c8a01538b130aa4d0c361eae14d)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Right now GummibootTarget is the only hardware TEST_TARGET with deployment,
but we will add more, so let's make an abstract base class, that will
do the common thing for all the hw targets.
(From OE-Core rev: 1d70b1908e1dc5d612b0627022659639e3f384e5)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Regardless of the numbering used in source archive filenames, the
upstream version number is in dotted form in documentation, release
notes and the website, so we need to be using that here since that is
what people will expect to see.
(From OE-Core rev: b8f82a8808b0d217815b30ed06efc8a0be4494a5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the following patch(es):
* sysroot-arg.patch (changes included in release)
Correct the fccache.c license checksum and the line numbers because the
license snippet has moved and, also, at the previous upgrade the lines
were wrong (shifted a couple of lines).
(From OE-Core rev: cc337329309a6ad94a68b2813211a15040638c00)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add in the TARGET_ARCH and SDK_ARCH suffixes from the gcc-cross changes.
The -intermediate toolchain parts were canned a while ago so drop them.
(From OE-Core rev: 8a733097bddcf0868fb5f8ca08ea59b2cbc4a3a9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As far as I can tell this variable is now completely unneeded. It would
only ever get used in target builds and these are now correctly done
in the target environment namespace, not any of our cross environments.
As such, CC and other variables contain the correct compilers and other
tune options and these are correctly picked up when building libgcc,
libstdc++ and others.
I tried to figure out where else these would make any sense and couldn't
find anything. Builds appear fine without them so lets drop the complexity
including the patch adding in this flag to gcc.
(From OE-Core rev: 5484596f4252e707ff791feedf143a72dbb613f6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This command modifies ${S} and can race against other tasks running do_configure and
having the scripts disappear from under them. To avoid this move to its own
task and work on the shared work directory as a common task.
It needs to be a python task to avoid lots of shell exported variables as
dependencies.
(From OE-Core rev: 55ed9ffbab5118140baac5d0d29dcc919e1f1668)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the gcc builds are building copies of the target libraries
that we never use (it isn't installed in do_install). This is a rather
pointless waste of cpu time.
Instead just compile the host targets. Comparing the package output of
this compared to a previous build shows that the unwind.h header is
missing since its provided by gcc. Fix this simply by copying it in.
(From OE-Core rev: 19448a50c106684ee7e3862f759418c982363a29)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows them to co-exist together in the native sysroot, with one
set of cross tools per target architecture.
(From OE-Core rev: a2c5509520d5c3e082f55844e6545d0309565f8f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This has been replaced by the class-cross override.
(From OE-Core rev: 7d6050c57f195589c8429397432c78f68298b672)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* there is issue for TUNE_PKGARCH missing in PACKAGE_ARCHS for machines
without thumb enabled, it was reported by Jacob Kroon on IRC
(From OE-Core rev: 1e1b42f687b5cd34623fe2682218958e1947eb92)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a recipe does not explicitly set ARM_INSTRUCTION_SET, then there is no
need to throw a warning:
WARNING: Recipe 'foobar' selects ARM_INSTRUCTION_SET to be 'None',
but tune configuration overrides it to 'arm'
(From OE-Core rev: e457d71641af8802e47eb4854072e3cfb957b001)
Signed-off-by: Jacob Kroon <jacob.kroon@mikrodidakt.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add PACKAGECONFIG for two optional plugins (smb & sftp), both require
other packages from meta-openembedded
(From OE-Core rev: 64c44f02f1a320399e2f02aeaf83022bf83b69c8)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The check for the config variable is using the wrong define
resulting in the #else always being used.
(From OE-Core rev: 7e498c4c17e2c1b6928d4c1fd127977bb588991f)
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently it wasn't working because *COMMAND variables were removed
from fetcher.
Now checkpkg sets the command internally and sends it as a parameter
to _runwget() function from wget fetch.
(From OE-Core rev: b9a51fc1901c378375cca041da27ddbd450c0412)
Signed-off-by: Irina Patru <irina.patru@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update ltp version to 20140422
Removed two patches that already exist in the current version:
1. regen-makefile.patch
2. ffsb-remove-hardcoded-configure.patch
(From OE-Core rev: d72430772400c7733da2339f238ab4ea69e48a8e)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Log the output of the command as it runs not when it finished, else
tail -f tmp/work/minnow-poky-linux/core-image-sato/1.0-r0/testimage/ssh_target_log
isn't as useful as it could be.
(From OE-Core rev: be8f766f43d85c364b9706b464ed0a59d0fbf0b7)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it will be inherited by most DEFAULTTUNEs, except few exceptions which
support only thumb and not arm
* respect missing "arm" in TUNE_FEATURES in feature-arm-thumb.inc, so
when recipe asks for "arm" and MACHINE supports only "thumb" ignore
recipe and try to build with "thumb"
* show warning when overriding ARM_INSTRUCTION_SET set by recipe from tune
config
(From OE-Core rev: 1250d3e009363d20f15bbfaced622c5912a7fb93)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Install openssl test suite and run it as ptest.
(From OE-Core rev: c48981d2d24a20978a17866fa478dde21bd96b91)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cross packages are not packaged so we can drop all the packaging tasks
for some small performance improvements.
(From OE-Core rev: be07344397b383ab5e56048acb64eb56272fe95e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now Separated out libgcc-initial is there
(From OE-Core rev: 161bfc91e92a5080d3d4c27b3bebcd9c5dac01e1)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If image contains dbus and ptest is in DISTRO_FEATURES, dbus-ptest package
is installed, regardless of whether ptest-pkgs is in IMAGE_FEATURES. This
issue will increase size for most small images.
This patch fixes this problem.
[YOCTO #5702]
(From OE-Core rev: 0416583f014138656babdf78a574357ae5ff25bd)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is done to work around the issue of auto-mounting block devices
(i.e. SD cards) when root filesystem is still in read-only mode and
creating /media/<device> mount-points by udev is not possible. That
is due to udev (/etc/rcS.d/S03udev) getting started earlier than
checkroot (/etc/rcS.d/S10checkroot.sh) gets a chance to re-mount the
rootfs as read-write.
Although, canonical FHS specifies /media/<device> as a mount point
for removable media devices, the latest 2.3 version was released in
2004 and since then FreeDesktop/udisks and other tools adopted the
new /run/media/<user>/<device> location. That was done to overcome
read-only rootfs limitation, since /run is usually a tmpfs mounted
partition, plus avoid name-clash between users.
For our embedded systems environment we assume single-user operation
and hence simplify mount point to just /run/media/<device>. But for
proper per-user mounting to /run/media/<user>/<device>, some sort of
session management is required along with the tool like udisks, that
is out of scope of this simple udev-based auto-mounting.
(From OE-Core rev: acfe3014d41de5e87cdbc58d0396349c6b9c3ffd)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This device list is only used if USE_DEVFS is set to '0' (which is NOT the default since 2013-12-14,
see commit f54fdd6673a136ee1cee1f3263a8a7820de43ca3) and if IMAGE_DEVICE_TABLE and IMAGE_DEVICE_TABLES are not set.
This is, of course a very subjective list but minimal with 62 (special) files.
However, you should be able to boot correctly a lot of embedded linux around.
Changes:
- add sda, sdb, sda[1234], sdb[1234]
- add mmcblk0, mmcblk0p[1234]
- add rtc0, rtc1
- restrict maximum hdaX from 19 to 4 (pata is old)
- add ttyS1
- remove initctl, apm_bios, tty8, ttySA
- sorted entries
(From OE-Core rev: 72c011d272d0ffbd349858f16127058c74276866)
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
/usr/src/kernel/source deployed by kernel-dev package is symbolically
linking to a build-time kernel source folder, which make no sense when
cross-compiling.
Fixed by not populating it at install stage.
(From OE-Core rev: edb85a9589be54a1e9c980aa669a380222a76cf4)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds support for read-only rootfs to the bind service.
Basically it just bind mounts several directories so that the bind
service could start correctly without reporting any error.
(From OE-Core rev: 99cc96eaee28bfde89096689b1296d28937ead88)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patches for opkg have been rebased using git so that they apply cleanly onto
the new release.
(From OE-Core rev: 354e25fe51a8e85122898d1849008ace5dbe9461)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The base_contains is kept as a compatibility method and we ought to
not use it in OE-Core so we can remove it from base metadata in
future.
(From OE-Core rev: d83b16dbf0862be387f84228710cb165c6d2b03b)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BitBake has the exact same code as oe.utils.contains so there's no
reason to duplicate it. We now rely on the bb.utils.contains code for
metadata.
(From OE-Core rev: 93499ebc46547f5bf6dcecd5a786ead9f726de28)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Install openssh test-suite and run it as ptest.
(From OE-Core rev: 4d0ecccae671bffb40c870a6e33d20be869b89bc)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its useful to separate out the native (cross) binaries from the target
compilation. We already do this for libgcc, this now takes the same
approach for -initial.
(From OE-Core rev: 8a2aaf8b6bdca2d28c0047093c7f668750d57666)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than building the whole of libgcc to obtain the unwind.h header
file, simply configure it and then install the file. This avoids copying
chunks of data around when we don't need to and building the same thing
twice.
After doing this we need to make sure the target build directory exists
in the libgcc case since it will no longer be created automatically.
(From OE-Core rev: 459e4dc25462771038459567c22e87d4cd38b117)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Prepare the ground for the creation of libgcc-initial by splitting common
libgcc code into a libgcc-common.inc file.
(From OE-Core rev: 7c9f4a22d5c14d768be872beb9fc798163d6d204)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In a number of places it would be helpful to be able to copy trees of
files using hardlinks. This turns out to be harder than you'd expect
since there is no good single command that does this well and handles
all file types correctly.
Abstracting this into a function therefore makes sense, cpio seems
as good an option as any other.
(From OE-Core rev: 14ef03182e1e5fe7cf6b4112f29e6609631aa78d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
TARGET_LDFLAGS is currently defined in bitbake.conf to contain
${TARGET_LINK_HASH_STYLE} which differs between MIPS and other
targets. Since TARGET_LDFLAGS is an exported variable it affects the hash
of every shell task even if it is not used.
We don't want native recipe tasks to have different hashes purely because
they happen to have been built in order to satisfy dependencies for
different MACHINEs since this causes lots of churn in the native sysroot
when switching between MACHINEs.
Making native.bbclass override TARGET_LDFLAGS to use BUILD_LDFLAGS ensures
consistent hashes and is a sensible thing to be doing anyway.
Although they don't appear to have the same detrimental affect on task
hashes TARGET_CPPFLAGS, TARGET_CFLAGS and TARGET_CXXFLAGS should be
overridden too.
(From OE-Core rev: 05a70ac30b37cab0952f1b9df501993a9dec70da)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Depends on cryptodev-linux for providing a header file
(From OE-Core rev: b7587d2ef7642dcc248744ade8f85f815185e78c)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add systemd support for ppp.
The unit file mostly comes from ArchLinux.
(From OE-Core rev: e84f7ea24b08e3127b70731908b819fbdc1cbfd5)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove patch that is now in the upstream version
Add new package for idiag libraries.
(From OE-Core rev: 407db800da02032e07e94b0b837a89cfb3e204a0)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
And rename the PV to match the upstream versioning
This requires a PE Bump to ensure package versions don't
go backwards.
(From OE-Core rev: dbcb25038959e4cf252ba812176a112a49a382d5)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we let configure look for sctp.h it might find it
on the host, so suppress the search with two cached
config variables.
(From OE-Core rev: 4aa6616661cc7a0eda4e9ba3e82a22472b444595)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Resolves warnings of this kind in the OpenPLi layer:
WARNING: Use of PRINC * was detected in the recipe *
(From OE-Core rev: 5ffb38d6ace7faae839c8cac7327b5b1c2daae1a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'loadkeys' program defines its own yywrap()/yylex() functions,
there is no need to link with flex shared library.
(From OE-Core rev: 69a7c9345360b61eda79f818775656fc1aa9932c)
Signed-off-by: Jacob Kroon <jacob.kroon@mikrodidakt.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador
Richard Purdie
Paul Eggleton
Stefan Stanacar
Valentin Popa
Cristian Iorga
Laurentiu Palcu
Saul Wold
Martin Jansa
Jacob Kroon
Drew Moseley
Irina Patru
Maxin B. John
Khem Raj
Chunrong Guo
Chong Lu
Denys Dmytriyenko
Matthieu Crapet
Ming Liu
Chen Qi
Paul Barker
Mike Crowe
Joe Slater
Mike Looijmans