There was a broken cross-reference to the YP development manual.
Fixed it.
(From yocto-docs rev: ed89eb1af507a656ff0ef16019d31db639eb5c36)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Pulling the "Common Tasks" chapter fromt YP Reference Manual
broke many links. Each of these links had to be repaired so that
the link is to the YP Develepment Manual now, where the chapter
was moved to.
(From yocto-docs rev: 08176135b8ac856b8cf7872300ce41ada87fa486)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are many references to YP documentation throughout the
YP manual set. They used to have hard-coded links to the
current release (e.g. yoctoproject.org/docs/1.1 for Edison).
This created a situation where if you went to a document on
the website and clicked on a external reference to another
manual, you would redirect to the current manual on the website.
Really, you would want to go to the latest manual, which is
one that is under development. Changing the links to
"yoctoproject.org/docs/latest" makes the tip of master, which
is used for devloping the next release, always have references
to the manuals being developed and not back to the stable
released set of manuals.
This "latest" and "current" scheme for the links is not perfect.
What has to happen when the latest set of the manuals freezes
and becomes the next stable release, all the links in the docs
will need to be changed from "latest" in the URL to the new
release number. So for example, all the "latest" occurences
would need to be changed to "1.2". Then for the next cycle
as development begins again, the links need to be infused with
"latest" again.
(From yocto-docs rev: a234aef34303b07671da956de0e94b352797143e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert found five instances where I missed the correct usage of
"BitBake."
(From yocto-docs rev: 0819076e8677accd157497ed4fa33ebab2528044)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The re-structuring of the web server that holds the documents created
some bad links. I thought I had gotten them all but apparently not.
this is a drawback of not being able to test things until after stuff
is done. In any case, I grepped through everything and this takes
care of it.
(From yocto-docs rev: cdbc3b3b7f6d6ff01024b977f966459cf414ad5c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* xterm is now the default
* Konsole from KDE 4.x will no longer work due to changes in behaviour
(From yocto-docs rev: 031a619ca19dbc2011a4df7bba1c332f2770e15d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the profiling sections to reflect Yocto Project rather than
Poky.
(From yocto-docs rev: 4f2c3bc93d97a6a8676fdd14ff9061bb92bdf5c9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Each of these chapters needed the title changes to reflect Yocto
Project and not Poky.
(From yocto-docs rev: a6d8d01b20af334ca9950c4287d61a728532f652)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a comprehensive pass through this entire section that incorporates
understanding given to me by Scott Garman. I have added more detail and
text that helps the non-developer understand what is fundamentally going
on.
(From yocto-docs rev: 124c722ccf0316f6e62790ca77c88d0444559378)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added more general description of what this section's purpose it.
I felt it was missing some basic information and making too many
assumptions.
(From yocto-docs rev: 4a5faeecc616313147283e50fe947c68555f55a2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section 5.3.2 (Using OProfileUI) was out of date. Several of the URLs
would not resolve. They were pointing to openedhand links that had
not been maintained. I updated the entire section.
(From OE-Core rev: 4678fcba5ab02669009d0ab67ec802f2ce1b087f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In section 5.2.2. (Building the Cross-GDB Package) there was a resulting
directory listed where you could find the binary. The directory had
a couple of variables for 'host-arch' and 'target-abi'. There was
a mis-guided angle bracket wrapping the 'host-arch' variable. This
was fixed.
(From OE-Core rev: a4fbf5caabb9ded34885612ae093759c82d7d2cb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I commented out a large section of the chapter, which went into detail
on how to locate, install, configure, and use the Yocto Ecliple
plug-in. This information is redundant in this book and is better
explained in the ADT Manual. I am referencing the information from
this chapter now.
(From OE-Core rev: f4f4efbf3f0b19fdb05ddf48ab48b4f42109a289)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 553] - In "The Anjuta Plug-in" section (5.1.2.2) there was
an URL to the source for the Anjuta Plug-in. The URL had the
pokylinux.org string in it and pointed to the old area. I changed
the URL to http://git.yoctoproject.org and directed the user to
look under IDE Plugins.
This is a partial fix to bug 553.
(From OE-Core rev: 0a1d8f48c8a2120ba57017e1fcf270c677486266)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 553] - In "The Eclipse Plug-in" section (5.1.2.1) there were two
URLs referencing the place to get the Eclipse plug-in. One specified
the URL to put into the HTTP:// field in the Eclipse IDE when installing
the software. This URL was incorrect. I replaced it with the correct
URL, which was http://www.yoctoproject.org/downloads/eclipse-plugin/.
The second URL that was fixed was referencing the source code for the
plug-in. It had the old pokylinux.org string. I changed it to
http://git.yoctoproject.org.
These fixes partially address bug 553.
(From OE-Core rev: 6871c913e0dae338708f74dbbe94cfe2fc498018)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the Ref Images appendix there was a link to the section
"External Development Using the Poky SDK" section that did not work
due to the section id string changing. I fixed the link.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Removed several blocks of text from section 5.1.2.1.1
"Installing and Setting up the Eclipse IDE". This text according
to Jessica was no longer needed.
The "Using OprofileUI" section had a description of how to use a
pre-built UI and how to download and build one. Feedback from Jessica
Zhang suggested removing the instruction for using a pre-built UI.
All that remains in the first paragraph now is instruction on how
to download and build the UI.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Added section 5.1.2.2 "The Anjuta Plug-in" into the Poky Reference Manual.
This section consists of sub-sections 5.1.2.2.1 "Setting Up the Anjuta
Plug-in", 5.1.2.2.2 "Configuring the Anjuta Plug-in", and 5.1.2.2.3 "Using
the Anjuta Plug-in". This information was in the original Poky Handbook
but had been removed by me since I thought it was not going to be supported
for the 0.9 Yocto Release. It has now been restored with a note indicating
that Anjuta will not be supported post 0.9 release.
I did some general text editing in each section for readability.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>